Asset Balance - How to get S_ALR_87011963 report information?

Hi everybody,
I have a requirement to get S_ALR_87011963 information for a report. We can't use the standard one because users needs to extract S_ALR_87011963 data for uploading in another system, so they need master asset information and from S_ALR_87011963 we need "depreciation value adjustment" and "net book value adquisition".
Does anybody knows if exists a FM or something that I can call from my program for getting this values?
Thanks in advance & kind regards,
MMP.

Look via SE36 at [logical database|http://help.sap.com/saphelp_nw70/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm] [ADA|help.sap.com/printdocu/core/Print46c/EN/data/pdf/FIAA/FIAA.pdf ], to get the datafile related to asset and the join between those files.
Next time, use a tool like [ST05 or SE30|https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_forums_rm&query=st05orSE30&adv=false&sortby=cm_rnd_rankvalue] and run the transaction to get the list of database access.
Regards

Similar Messages

How to get the Reports of Change Tracking Table in MDM?

Hi!
Please tell me how to get the reports of Change Tracking Table in MDM which is a System table, directly from MDM without using any interface.
Thanks in advance for the reply.
With Best Regards
Devendra Pandey

Hi Devendra,
MDM can track changes on tables and fields. <u>The level of change tracking, and which tables/fields to track, are configurable in the MDM Console</u>. MDM opens a new database on the same database engine as the MDM repository and writes all change records to this database.
For information of various steps you can visit
<a href="http://help.sap.com/saphelp_mdm550/helpdata/en/45/c7b20339ee570ae10000000a114a6b/content.htm">this URL</a>
Regards,
Krutarth

How to get SAP report that inculde PR number, PR amount, PO number, PO amount and cost center ??

Please help! How to get the report in SAP that include information of PR number, PR amount, PO number, PO amount and cost center in one report??
I try ME5A but th
ere are no information of PO amount.

Thank you for your help.
I have no authorize to use SQVI as I am only the user. I will use your information and ask my SAP team to help.
Thank you again (^_^)

Itunes u public - How to get daily report

Hello,
does anybody have any suggestion about how to get daily report for iTunes U public site ?
The only information I've found is in iTunes U Administration Guide for Private Site with the following example
http://deimos.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/example.edu? StartDate=2007-09-12&EndDate=2007-09-13 &credentials=Administrator@urn:mace:itunesu.com:sites:example.edu &identity=%22Jane+Doe%22+%3Cjdoe%40example.edu%3E+%28jdoe%29+%5B42%5D &signature=38bda70d9aa6975ae8756754034feb6e3c794aca4b21665f6dc85d2ed42d4f6b
but I do not understand how I can apply that for a public site.
How to get "credentials" ? What baout identity and signature? What I've is just my iTunes U Site Manger account name and pssword.
Any help is very appreciated.
Kind Regards,
Diego

Find the solution by myself.
There are two iTunes U sites with different credentials: one is the original iTunes U Public before first activation and another created automatically by the activation process. The last is the actual iTunes U Public site
managed by iTunes U Public Site Manger. The difference is the domain name of the site: if I sign in using my domain name with "-dz" added at the the end, I can access the actual credentials (Site URL, Debug Suffix, Shared Secret, Administrator Credentials) that differs completely by the ones of the original iTunes site.
No where I found information about that, neither I've received any notification mail about the domain name change after the site activation process.
Hope that can help.

How to get a report in pdf format.

Hi Experts,
Could any one let me know that, how to get the report in PDF format.
Once a report is generated it should be displayed in pdf format or downloaded in pdf format.
Thanks in Advance,
Regards,
Irfan Hussain

Hi,
Check out this code:
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
* Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
* Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
* Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
* Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
* Write statement to represent report output. Spool request is created
* if write statement is executed in background. This could also be an
* ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
*** Alternative way could be to submit another program and store spool
*** id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
*        to sap-spool
*        spool parameters   %_print
*        archive parameters %_print
*        without spool dynpro
*        and return.
* Get spool id from program called above
* IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
*       FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
*       FORM get_job_details                                          *
FORM get_job_details.
* Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
*       FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
* Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
*       FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
Regards,
Gayathri

I tunes has stopped working in windows 7 and I don't know how to get the crash information that everyone else seems to get to know what the cause is....any help? I have a toshiba windows 7 computer.

I have a toshiba computer and it is windows 7, recently after I installed imatch everytime I open itunes I get the message 'i tunes has stopped working' and windows cannot find a solution and has to close. There is no solution and I don't know how to get the crash information on my computer....can anyone help as I want to finish downloading all my songs to match to be available on my mac products.

Re: That garbage is unreadable.
If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

How to get the report name from the call stack

Hi,
I have a question about how to get the caller information dynamically in a function module.
For example.
ZGET_CALLER_INFORAMTION,
get the caller name -- how ??
Thanks in advance
Best Regards,
Johnney

Hi,
You can use SY_CPROG - caller in external procedures, bye using this u can get the progam name.
Regards,
kavitha.k

How to get customised reports through Flexible Analysis available in PMIS

Dear Sir,
Please guide us how to get customised reports through Flexible Analysis available in PMIS.
Thanks & Regards,
PM Team

[Sap Help|http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/375e9c449a11d188fe0000e8322f96/frameset.htm].
Regards
Narasimhan

How to get refreshed report

Dear Friends,
I have attached my report in my .aspx file.
I am passing the condition through myCrystalReportViewer.SelectionFormula
It was showing all record's reports those are tested in CR2008.
But as soon as we have entered a new record through our web form, it is not displaying the report.
I have added "myCrystalReportViewer.RefreshReport()".
Then also it is not displaying the report for the new record entered, where as the previous records are running fine.
Can any one please tell what code should I add or steps in CR2008 to get this report after entering any record.
Thanks and regards
Edited by: Md. Mushtaque on Sep 1, 2008 5:03 PM

Dear The Panda,
As per your reply I have followed all steps.
Unchecked "Save Data with Report" in Sub Report
Checked the Links between Sub Report and Main Report
Now on calling the report from my web form only a blank page with TextObject's text is coming.
I Could not understand that why this is happening or what is the concept behind linking a report from Web forms.
How to get refreshed report?
Well thanks for your reply, but now God knows how to solve this problem.
Thanks again

How to get RMAN catalog information from Target database?

Hi,
How to get RMAN catalog information from Target database because i don't know about catalog database? is it possible?
Thanks

If you run RMAN backups of a target database using a Catalog schema in another database, the target is not aware of the catalog.
The RMAN backup script would have the connection identifier for the Catalog.
Hemant K Chitale

How to get the reporting icon in cube.

hi,
i have a successful request(with all the required data) in the cube (manage screen) but i could n't get the reporting icon next to request id in the cube manage screen how to get ithe reporting icon.

This might be because of issue -- data is not ready to view in the Query level. So that it happened.
Go to the 'Manage' in the InfoCube level and verify the last updated request are ready to report.
The possible causes may be
1. If the previous request may be an error in Cube level, the other requests will not be ready to report.
2. If there is Aggregate is maintaining in the Cube level, you should perform rollup to fill aggregates and made the requests available to report.
Edited by: prashanthk on Aug 31, 2010 10:48 AM

How to get the report server name in Forms 10g.

How to get the report server name in Forms 10g.
I'm using the Application Server 10g 10.1.2.

Hello,
I do not think that you can get this value from anywhere. A solution is to put the Reports server name in an environment variable stored in the /forms/server/default.env file, then to query it at Forms runtime with the TOOL_ENV.Getvar() built-in.
Francois

How to get a report on Installed Software Updates on client computers.

Hi, I'm working with a large company who plans to deploy mac's nationwide. ARD is what we will be using for remote management of the cient systems. My question is; how to get a report on Installed Software Updates on client computers.
Thanks in advance!

Hi,
Try this.
Go to SE16 give table input as T511
and select OPKEN / Operation indicator field input as A and execute.
This will give you output of wage types wich configured for deduction.

How to get Remote System informations using java

Hi
Any one know how to get remote machine information, processor speed , mainmemory size, etc using java .
Thanks in adv.......

Hi
Any one know how to get remote machine information,
processor speed , mainmemory size, etc using java .
Thanks in adv.......That's impossible.
Kaj

Asset accounting not balanced btwen FS10N vs S_ALR_87011963 report

Hi SAP experts
FS10N report shows balance of $ 139.000 USD whereas S_ALR_87011963 (report date 30.11.2009) shows $ 100.000 USD._
However, when user runs S_ALR_87011963 (report date 31.12.2009) on items capitalized between 01.01.1900 and 30.11.2009 the amount is $ 139.000.
Any ideas why this difference occurs?
Any help is welcome
Roger

Hi,
You can use ABST and ABST2 transacton to see where the differences are and correct it. Someone could have made a direct posting to the fixed asset recon accounts. you can try to correct the difference using OASV or FB01 after changing status of recon account using OAMK.
Regards
K.R

Asset Balance - How to get S_ALR_87011963 report information?

Similar Messages

Maybe you are looking for