Asset Creation Event Error
Hi All
I have a requirement to start a workflow when an asset is created. I am using BUS1022. I have created and activated the linkage.
The entry in SWED exists for change doc: ANLA and the table ANLA
I have created a similar entry in SWEC for the event CREATED.
When i create an asset, the event does get triggered but there is an error., In SWEL it shows up as
Check FM with exception.
Receiver type :TS00001003
Message: Element FLAG_ANLAGE_BEARB is not available in the container
Check FM: AWFC_CHECK_ASSET_INCOMPLETE
Now I Have created the above mentioned element in my workflow and passed it the values in binding.
Where do i have to define this parameter? It is required in the parameters of the event---.
Thank you
Hi,
I am using other workflows like PR, PO, SO and too many WF templates, for those workflows also the event trace is not getting. But the workflows are getting triggered with out any problem.
Steps for event trace is SWELS for switch on the event trace and then executing the transaction (AS01) then after I am checking the event trace by using SWEL.
Can you pls advise the proper way for getting event trace, if I am not using the proper way.
Can any body explain the process for Asset creation.
Is there any equipment needs to be created before of after of Asset creation. I thougt, depends on this the CREATED event get triggers.
Thanks in adv.
Krish.
Similar Messages
-
Error in Assets creation in AS01
HI Expert,
I'm facing error while trying to create Assets account under AS01 - strange part is i have created building account in same heading but while trying for mahinery and furniture getting 2 differene errors
1)Number range 1 is not in the number allocation range? where as ihave already created 01 number range in FBN1
2)while trying to created the machinery a problem of screen layout for asset master data in this tab error is appering when i tried to give the option like madary optional and suprressed in screen layout for asset master getting error as maintenance level not assinged and here i'm not able to make any changes in those field and now all fields are coming as a mandtory- fields like business area ect
Appreciated to all those who will reply ASAP
Thanks & Regards
Jain VargheseHi Paul,
Thanks for your reply,
1) I have created the number range for the same, because of that only i was able to created assets under that column for building but when trying to create for Furniture and Fixture i'm getting error as Number range 1 is not in the number allocation range?
Please note: i have created the number range already but then also getting the error.
2) for the 2nd question but not able to make any changes in field status group for the asset machinery its giving error as maintenance level not assinged and while doing same all the option became as a mandatory where as i'm not able make them as optional again?
Please have a highlight on this again and help me out.....
Appreciated your help
Regards
Jain -
Trigger Second Interface for the same Creation event
Hello all,
I have to send my every created equipment to two different systems.
I created Custom function Modules which create individual Idocs.
I called these function modules in Methods and we created two custom Tasks to trigger workflow creation event.
Problem is system is not accepting the second event triggering. It is showing
'Feed back After error'
'Deactivating' --- In Event Trace, and it is deactivating the second link in SWETYPV and first event is working fine.
First Event was developed long back and we did for second event now.
Did i miss something for my new Tasks?
If i change the setting of Event delivery to '(always) Using Queue ' for second event in SWETYPV,
It is not showing error but event trace is showing that second event is in Queue?
How to process this Event?
Thanks,
Krishna.Hello,
It was Checked already..
still not working..
Event Trace error was giving this error also..
'Event EQUI CREATED for task TS90100007 not defined as start/end event'.
Regards,
Krishna.
Edited by: Krishna on Sep 11, 2009 3:32 PM -
Plant & business area validation in asset creation
Dear All,
Am working in a plant & business area validation which will fire the error msg when wrong plant is assigned at time of asset creation. Issue is for a company we have 19 business area and each business area assigned to various plant. In order to avoid the individual step for each business area, have merged two or more business area in pre-requiste section and correspondingly plant had been validated in check section. But when am inserting two check conditions, its not even working as per the logic, For ex :
Pre-Requiste :
( ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1101' ) AND (
ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1102' )
Check :
( ANLZ-WERKS = '1307' OR ANLZ-WERKS = '1308' OR ANLZ-WERKS = '1309' OR ANLZ-WERKS = '1304' ) AND
( ANLZ-WERKS = '1305' OR ANLZ-WERKS = '1306' ANLZ-WERKS = '1344' )
For the above condition system not validating as per business area since if we entering business area 1101 and entering the plant which related to 1102 business area, system not throwing the error msg where as if we put a single condition in a step its working fine.
Kindly suggest me how to overcome this by avoiding individual step creation for each business area.
Regards,
Balaji.cHi,
I have chnaged my validation in the following way as follows,
Pre-requiste :
Co code=XXXX
Check:
Business area = XXXX AND Plant = XXXX.
This condition is working fne for one business area, where as if i include more than one business area in the check section system not validating the condition, in a step its validating only one condition. Since 21 business area available for a co code its not feasible to create individual step.
Kindly suggest me is there any other alternative way to overcome this.
Regards,
Balaji.c -
User Exit / Badi / BTE for Asset creation A ?
Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name Description
AAPM0001 Integration of asset accounting and plant maintenance
AFAR0003 External changeover method
AFAR0004 Determination of proportional values for retirement
AINT0004 Change amount posted for certain areas
AINT0005 Dummy for extended syntax check. Do not use.
AISA0001 Assign Inventory Number
AIST0001 Exchange number range in master data maintenance
AIST0002 Customer fields in asset master
AMSP0002 Determine relationship type for two company codes
TRAN0001 User exit for asset transfer
Please suggest if anybody worked on this.
regards,
ImranHi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth -
User Exit/BADI for AS01 ( Asset Creation )
Hi Xperts,
My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
Can anyone suggest user exit/BADI which suit this requirement.
I have gone through forum search, but not found suitable object.
Ram.Hi Ram,
Check out below Badi and Enhancement
BADI
IHSA_LIST_EDITING
ENHANCEMRNT
EXIT_SAPLAAPM_002
EXIT_SAPLAIST_001
EXIT_SAPLAIST_002
EXIT_SAPLAIST_003
THANKS & REGARDS
G.Vendhan
Edited by: vendhan g on Jul 24, 2009 12:33 PM -
Automatic Asset creation through Project settlement
Dear All,
We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
Can any body help me about the Process of Auto Asset creation through Project settlement.
I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
Thanks
Abhijeet
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PM
Edited by: Abhijeet Patil on Oct 5, 2011 3:05 PMHi,
There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
Regards
Sreekanth -
Stop the Billing Doc creation for error confirmation
Hello Experts,
This is regarding the Billing issue.
Our Service Process: We create the Service Process and also create the followup confirmations.
For ex: I have created one SP and also created one followup two confirmations.
The second Confirmation contained an error and it has generated Billing Document
Actually The bill should not be generated until all confirmation contain no error and only one billing document should be generated per Service Call.
Could you help to stop ,the Billing Doc creation for Error Confirmations?
Regards
MadhuCheck the following thread: KEPM valuation K/(834) No standard cost estimate could be found for mat.
Shail -
Local Event ERROR : oracle.apps.ar.applications.CashApp.
Hi,
I am getting frequent error notifications in my production system with error message:
Local Event ERROR : oracle.apps.ar.applications.CashApp.apply / oracle.apps.ar.applications.CashApp.apply_3336277_03-04-2012 14:31:15
these notifications are generated in 100's per day and reached more than 200 thousand now.
Please suggest how to resolve this issue.
Thank you.Event Details.
Event Field Value
Event Name oracle.apps.ar.applications.CashApp.apply
Event Key oracle.apps.ar.applications.CashApp.apply_3491076_05-04-2012 13:19:33
To Agent
To System
From Agent
From System
Send Date 13-05-1433 13:19:33
Receive Date
Priority 0
Correlation ID
Parameter : USER_ID 1844
Parameter : RESP_ID 50862
Parameter : RESP_APPL_ID 222
Parameter : SECURITY_GROUP_ID 1107
Parameter : ORG_ID 127
Parameter : RECEIVABLE_APPLICATION_ID 3491076
Parameter : TRX_PS_STATUS CL
Parameter : RCPT_PS_STATUS OP
Parameter : TRX_DUE_DATE 2456052
Parameter : TRX_APP_AMT 1350
Parameter : ERROR_TYPE ERROR
Parameter : SKIP_ERROR_SUB 669603A288DE8CA7E040
Parameter : SUB_GUID A242DC2FF79D70A7E030 -
Any USER EXIT or BADI for modification in ME21N Asset Creation
Hi Guyz,
We have a requiremnt where we need to put some validaion/check in Asset Creation of ME21N,
Any possible BADIs or USER EXIT available for this modification.
Pease help.
Thanks
JaifHi Jaif,
For BADIs please go to SE24 put cl_exithandler diplay it and put the break-point execute the transaction for which you want to find out badi you will get the badi name in exit name parameter.
Regards
Sagar -
CTAS causes ORA-31061: XDB error: XML event error
The query works, the CTAS fails:
CREATE TABLE Moocows AS
ERROR at line 1:
ORA-31061: XDB error: XML event error
ORA-19202: Error occurred in XML processing
In line 1 of orastream:
LPX-00245: extra data after end of document
CREATE TABLE Moocows AS
WITH
XML(Document)
AS
SELECT
--Amazon_PAPI.Get_Response(Amazon_PAPI.ItemLookup('032244047145', 'UPC', 'Toys', '5011363525517', 'EAN', 'Toys'))
--Amazon_PAPI.Get_Response(Amazon_PAPI.ItemLookup('032244047145', 'UPC', 'All', '5011363525517', 'EAN', 'All'))
Amazon_PAPI.Get_Response(Amazon_PAPI.ItemSearch('Hungry Hungry Hippos', 'All', '', '', '', 'Mastermind', 'All', '', '', ''))
FROM
Dual
SELECT
Items.Id,
Items.Code,
Items.Message,
Items.Isvalid,
Item.Id Item_Id,
Item.ASIN,
Item.DetailPageURL,
XMLAGG(Item.ItemLink) ItemLink,
Item.SmallImage_URL,
Item.SmallImage_Height,
Item.SmallImage_Height_Units,
Item.SmallImage_Width,
Item.SmallImage_Width_Units,
Item.MediumImage_URL,
Item.MediumImage_Height,
Item.MediumImage_Height_Units,
Item.MediumImage_Width,
Item.MediumImage_Width_Units,
Item.LargeImage_URL,
Item.LargeImage_Height,
Item.LargeImage_Height_Units,
Item.LargeImage_Width,
Item.LargeImage_Width_Units,
XMLAGG(Item.ImageSet) ImageSet,
XMLAGG(Item.Actor) Actor,
XMLAGG(Item.Artist) Artist,
Item.AspectRatio,
Item.AudienceRating,
XMLAGG(Item.AudioFormat) AudioFormat,
XMLAGG(Item.Author) Author,
Item.Binding,
Item.Brand,
XMLAGG(Item.CatalogNumberListElement) CatalogNumberListElement,
XMLAGG(Item.Category) Category,
Item.CEROAgeRating,
Item.ClothingSize,
Item.Color,
XMLAGG(Item.Creator) Creator,
XMLAGG(Item.Director) Director,
Item.EAN,
XMLAGG(Item.EANListElement) EANListElement,
Item.Edition,
XMLAGG(Item.EISBN) EISBN,
Item.EpisodeSequence,
Item.ESRBAgeRating,
XMLAGG(Item.Feature) Feature,
XMLAGG(Item.Format) Format,
Item.Genre,
Item.HardwarePlatform,
Item.HazardousMaterialType,
Item.IsAdultProduct,
Item.IsAutographed,
Item.ISBN,
Item.IsEligibileForTrade,
Item.IsMemorabilia,
Item.IssuesPerYear,
XMLAGG(Item.ItemDimensions) ItemDimensions,
Item.ItemPartNumber,
Item.Label,
XMLAGG(Item.Langauge) Langauge,
Item.LegalDisclaimer,
Item.ListPrice,
Item.MagazineType,
Item.Manufacturer,
Item.ManufacturerMaximumAge,
Item.ManufacturerMinimumAge,
Item.ManufacturerPartsWarrantyDesc,
Item.MediaType,
Item.Model,
Item.ModelYear,
Item.MPN,
Item.NumberOfDiscs,
Item.NumberOfIssues,
Item.NumberOfItems,
Item.NumberOfPages,
Item.NumberOfTracks,
Item.OperatingSystem,
Item.PackageDimensions_Height,
Item.PackageDimensions_Height_Units,
Item.PackageDimensions_Length,
Item.PackageDimensions_Length_Units,
Item.PackageDimensions_Weight,
Item.PackageDimensions_Weight_Units,
Item.PackageDimensions_Width,
Item.PackageDimensions_Width_Units,
Item.PackageQuantity,
Item.PartNumber,
XMLAGG(Item.PictureFormat) PictureFormat,
XMLAGG(Item.Platform) Platform,
Item.ProductGroup,
Item.ProductTypeName,
Item.ProductTypeSubcategory,
Item.PublicationDate,
Item.Publisher,
Item.RegionCode,
Item.ReleaseDate,
Item.RunningTime,
Item.SeikodoProductCode,
Item.Item_Size,
Item.SKU,
Item.Studio,
Item.SubscriptionLength,
Item.Title,
Item.TrackSequence,
Item.TradeInValue,
Item.UPC,
XMLAGG(Item.UPCListElement) UPCListElement,
Item.Warranty,
Item.WEEETaxValue
FROM
XMLTABLE
XMLNAMESPACES(DEFAULT 'http://webservices.amazon.com/AWSECommerceService/2011-08-01'),
'//OperationRequest/Errors/Error
| //Items'
PASSING
(SELECT Document FROM XML)
COLUMNS
Id FOR ORDINALITY,
Code VARCHAR2(0050) PATH 'Code',
Message VARCHAR2(4000) PATH 'Message',
IsValid VARCHAR2(005) PATH 'Request/IsValid',
Item XMLTYPE PATH 'Item'
) Items
LEFT JOIN
XMLTABLE
XMLNAMESPACES(DEFAULT 'http://webservices.amazon.com/AWSECommerceService/2011-08-01'),
'/Item'
PASSING
Items.Item
COLUMNS
Id FOR ORDINALITY,
ASIN VARCHAR2(0010) PATH 'ASIN',
DetailPageURL VARCHAR2(0256) PATH 'DetailPageURL',
ItemLink XMLTYPE PATH 'ItemLinks/ItemLink',
SmallImage_URL VARCHAR2(0256) PATH 'SmallImage/URL',
SmallImage_Height NUMBER(4) PATH 'SmallImage/Height',
SmallImage_Height_Units VARCHAR2(0006) PATH 'SmallImage/Height/@Units',
SmallImage_Width NUMBER(4) PATH 'SmallImage/Width',
SmallImage_Width_Units VARCHAR2(0006) PATH 'SmallImage/Width/@Units',
MediumImage_URL VARCHAR2(0256) PATH 'MediumImage/URL',
MediumImage_Height NUMBER(4) PATH 'MediumImage/Height',
MediumImage_Height_Units VARCHAR2(0006) PATH 'MediumImage/Height/@Units',
MediumImage_Width NUMBER(4) PATH 'MediumImage/Width',
MediumImage_Width_Units VARCHAR2(0006) PATH 'MediumImage/Width/@Units',
LargeImage_URL VARCHAR2(0256) PATH 'LargeImage/URL',
LargeImage_Height NUMBER(4) PATH 'LargeImage/Height',
LargeImage_Height_Units VARCHAR2(0006) PATH 'LargeImage/Height/@Units',
LargeImage_Width NUMBER(4) PATH 'LargeImage/Width',
LargeImage_Width_Units VARCHAR2(0006) PATH 'LargeImage/Width/@Units',
ImageSet XMLTYPE PATH 'ImageSets/ImageSet',
Actor XMLTYPE PATH 'ItemAttributes/Actor',
Artist XMLTYPE PATH 'ItemAttributes/Artist',
AspectRatio VARCHAR2(0020) PATH 'ItemAttributes/AspectRatio',
AudienceRating VARCHAR2(0020) PATH 'ItemAttributes/AudienceRating',
AudioFormat XMLTYPE PATH 'ItemAttributes/AudioFormat',
Author XMLTYPE PATH 'ItemAttributes/Author',
Binding VARCHAR2(0050) PATH 'ItemAttributes/Binding',
Brand VARCHAR2(4000) PATH 'ItemAttributes/Brand',
CatalogNumberListElement XMLTYPE PATH 'ItemAttributes/CatalogNumberList/CatalogNumberListElement',
Category XMLTYPE PATH 'ItemAttributes/Category',
CEROAgeRating VARCHAR2(0020) PATH 'ItemAttributes/CEROAgeRating',
ClothingSize VARCHAR2(0050) PATH 'ItemAttributes/ClothingSize',
Color VARCHAR2(0100) PATH 'ItemAttributes/Color',
Creator XMLTYPE PATH 'ItemAttributes/Creator',
Department VARCHAR2(0050) PATH 'ItemAttributes/Department',
Director XMLTYPE PATH 'ItemAttributes/Director',
EAN NUMBER(15) PATH 'ItemAttributes/EAN',
EANListElement XMLTYPE PATH 'ItemAttributes/EANList/EANListElement',
Edition VARCHAR2(0020) PATH 'ItemAttributes/Edition',
EISBN XMLTYPE PATH 'ItemAttributes/EISBN',
EpisodeSequence VARCHAR2(0020) PATH 'ItemAttributes/EpisodeSequence',
ESRBAgeRating VARCHAR2(0020) PATH 'ItemAttributes/ESRBAgeRating',
Feature XMLTYPE PATH 'ItemAttributes/Feature',
Format XMLTYPE PATH 'ItemAttributes/Format',
Genre VARCHAR2(0050) PATH 'ItemAttributes/Genre',
HardwarePlatform VARCHAR2(0020) PATH 'ItemAttributes/HardwarePlatform',
HazardousMaterialType VARCHAR2(0050) PATH 'ItemAttributes/HazardousMaterialType',
IsAdultProduct VARCHAR2(0005) PATH 'ItemAttributes/IsAdultProduct',
IsAutographed VARCHAR2(0005) PATH 'ItemAttributes/IsAutographed',
ISBN VARCHAR2(0013) PATH 'ItemAttributes/ISBN',
IsEligibileForTrade VARCHAR2(0005) PATH 'ItemAttributes/IsEligibileForTrade',
IsMemorabilia VARCHAR2(0005) PATH 'ItemAttributes/IsMemorabilia',
IssuesPerYear VARCHAR2(0050) PATH 'ItemAttributes/IssuesPerYear',
ItemDimensions XMLTYPE PATH 'ItemAttributes/ItemDimensions',
ItemPartNumber VARCHAR2(0255) PATH 'ItemAttributes/ItemPartNumber',
Label VARCHAR2(4000) PATH 'ItemAttributes/Label',
Langauge XMLTYPE PATH 'ItemAttributes/Languages/Langauge',
LegalDisclaimer VARCHAR2(4000) PATH 'ItemAttributes/LegalDisclaimer',
ListPrice VARCHAR2(0020) PATH 'ItemAttributes/ListPrice',
MagazineType VARCHAR2(0020) PATH 'ItemAttributes/MagazineType',
Manufacturer VARCHAR2(4000) PATH 'ItemAttributes/Manufacturer',
ManufacturerMaximumAge VARCHAR2(0050) PATH 'ItemAttributes/ManufacturerMaximumAge',
ManufacturerMinimumAge VARCHAR2(0050) PATH 'ItemAttributes/ManufacturerMinimumAge',
ManufacturerPartsWarrantyDesc VARCHAR2(4000) PATH 'ItemAttributes/ManufacturerPartsWarrantyDesc',
MediaType VARCHAR2(0020) PATH 'ItemAttributes/MediaType',
Model VARCHAR2(0100) PATH 'ItemAttributes/Model',
ModelYear NUMBER(4) PATH 'ItemAttributes/ModelYear',
MPN VARCHAR2(0255) PATH 'ItemAttributes/MPN',
NumberOfDiscs NUMBER(3) PATH 'ItemAttributes/NumberOfDiscs',
NumberOfIssues NUMBER(3) PATH 'ItemAttributes/NumberOfIssues',
NumberOfItems NUMBER(7) PATH 'ItemAttributes/NumberOfItems',
NumberOfPages NUMBER(4) PATH 'ItemAttributes/NumberOfPages',
NumberOfTracks NUMBER(3) PATH 'ItemAttributes/NumberOfTracks',
OperatingSystem VARCHAR2(20) PATH 'ItemAttributes/OperatingSystem',
PackageDimensions_Height NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Height',
PackageDimensions_Height_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Height/@Units',
PackageDimensions_Length NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Length',
PackageDimensions_Length_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Length/@Units',
PackageDimensions_Weight NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Weight',
PackageDimensions_Weight_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Weight/@Units',
PackageDimensions_Width NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Width',
PackageDimensions_Width_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Width/@Units',
PackageQuantity NUMBER(5) PATH 'ItemAttributes/PackageQuantity',
PartNumber VARCHAR2(0100) PATH 'ItemAttributes/PartNumber',
PictureFormat XMLTYPE PATH 'ItemAttributes/PictureFormat',
Platform XMLTYPE PATH 'ItemAttributes/Platform',
ProductGroup VARCHAR2(0050) PATH 'ItemAttributes/ProductGroup',
ProductTypeName VARCHAR2(4000) PATH 'ItemAttributes/ProductTypeName',
ProductTypeSubcategory VARCHAR2(50) PATH 'ItemAttributes/ProductTypeSubcategory',
PublicationDate VARCHAR2(20) PATH 'ItemAttributes/PubliucationDate',
Publisher VARCHAR2(0255) PATH 'ItemAttributes/Publisher',
RegionCode VARCHAR2(20) PATH 'ItemAttributes/RegionCode',
ReleaseDate VARCHAR2(20) PATH 'ItemAttributes/ReleaseDate',
RunningTime VARCHAR2(20) PATH 'ItemAttributes/RunningTime',
SeikodoProductCode VARCHAR2(50) PATH 'ItemAttributes/SeikodoProductCode',
Item_Size VARCHAR2(50) PATH 'ItemAttributes/Size',
SKU VARCHAR2(0255) PATH 'ItemAttributes/SKU',
Studio VARCHAR2(0255) PATH 'ItemAttributes/Studio',
SubscriptionLength VARCHAR2(20) PATH 'ItemAttributes/SubscriptionLength',
Title VARCHAR2(4000) PATH 'ItemAttributes/Title',
TrackSequence VARCHAR2(0100) PATH 'ItemAttributes/TrackSequence',
TradeInValue VARCHAR2(4000) PATH 'ItemAttributes/TradeInValue',
UPC NUMBER(12) PATH 'ItemAttributes/UPC',
UPCListElement XMLTYPE PATH 'ItemAttributes/UPCList/UPCListElement',
Warranty VARCHAR2(4000) PATH 'ItemAttributes/Warranty',
WEEETaxValue VARCHAR2(0100) PATH 'ItemAttributes/WEEETaxValue'
) Item
ON
1 = 1
GROUP BY
Items.Id,
Items.Code,
Items.Message,
Items.Isvalid,
Item.Id,
Item.ASIN,
Item.DetailPageURL,
Item.SmallImage_URL,
Item.SmallImage_Height,
Item.SmallImage_Height_Units,
Item.SmallImage_Width,
Item.SmallImage_Width_Units,
Item.MediumImage_URL,
Item.MediumImage_Height,
Item.MediumImage_Height_Units,
Item.MediumImage_Width,
Item.MediumImage_Width_Units,
Item.LargeImage_URL,
Item.LargeImage_Height,
Item.LargeImage_Height_Units,
Item.LargeImage_Width,
Item.LargeImage_Width_Units,
Item.AspectRatio,
Item.AudienceRating,
Item.Binding,
Item.Brand,
Item.CEROAgeRating,
Item.ClothingSize,
Item.Color,
Item.EAN,
Item.Edition,
Item.EpisodeSequence,
Item.ESRBAgeRating,
Item.Genre,
Item.HardwarePlatform,
Item.HazardousMaterialType,
Item.IsAdultProduct,
Item.IsAutographed,
Item.ISBN,
Item.IsEligibileForTrade,
Item.IsMemorabilia,
Item.IssuesPerYear,
Item.ItemPartNumber,
Item.Label,
Item.LegalDisclaimer,
Item.ListPrice,
Item.MagazineType,
Item.Manufacturer,
Item.ManufacturerMaximumAge,
Item.ManufacturerMinimumAge,
Item.ManufacturerPartsWarrantyDesc,
Item.MediaType,
Item.Model,
Item.ModelYear,
Item.MPN,
Item.NumberOfDiscs,
Item.NumberOfIssues,
Item.NumberOfItems,
Item.NumberOfPages,
Item.NumberOfTracks,
Item.OperatingSystem,
Item.PackageDimensions_Height,
Item.PackageDimensions_Height_Units,
Item.PackageDimensions_Length,
Item.PackageDimensions_Length_Units,
Item.PackageDimensions_Weight,
Item.PackageDimensions_Weight_Units,
Item.PackageDimensions_Width,
Item.PackageDimensions_Width_Units,
Item.PackageQuantity,
Item.PartNumber,
Item.ProductGroup,
Item.ProductTypeName,
Item.ProductTypeSubcategory,
Item.PublicationDate,
Item.Publisher,
Item.RegionCode,
Item.ReleaseDate,
Item.RunningTime,
Item.SeikodoProductCode,
Item.Item_Size,
Item.SKU,
Item.Studio,
Item.SubscriptionLength,
Item.Title,
Item.TrackSequence,
Item.TradeInValue,
Item.UPC,
Item.Warranty,
Item.WEEETaxValue
ORDER BY
Items.Id,
Item.Id;By using //, i am able to use the same query for both. Is there a better way?If using a single query is a must, then I guess it's OK.
Ideally, however, i would like the text of each (without tags), separated by commas.The fn:string-join() function can do that, e.g. :
ItemLinkDesc VARCHAR2(4000) PATH 'fn:string-join(ItemLinks/ItemLink/Description, ";")'But I'm not sure it's a good idea because you'll be losing the structured nature of the data.
Maybe it would be better to collect repeating elements into a collection of SQL object types, but again it all depends on how you want to use the data later.
So, following your advice, i removed the XMLAGGs and GROUP BY clause, but, again the query works, the CTAS does not:Strange...
Works for me :
SQL> select * from v$version;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL>
SQL> CREATE TABLE Moocows AS
2 SELECT
3 Items.Id,
4 Items.Code,
5 Items.Message,
6 Items.Isvalid,
7 Item.Id Item_Id,
8 Item.ASIN,
9 Item.DetailPageURL,
10 Item.ItemLink,
11 Item.SmallImage_URL,
12 Item.SmallImage_Height,
13 Item.SmallImage_Height_Units,
14 Item.SmallImage_Width,
15 Item.SmallImage_Width_Units,
16 Item.MediumImage_URL,
17 Item.MediumImage_Height,
18 Item.MediumImage_Height_Units,
19 Item.MediumImage_Width,
20 Item.MediumImage_Width_Units,
21 Item.LargeImage_URL,
22 Item.LargeImage_Height,
23 Item.LargeImage_Height_Units,
24 Item.LargeImage_Width,
25 Item.LargeImage_Width_Units,
26 Item.ImageSet,
27 Item.Actor,
28 Item.Artist,
29 Item.AspectRatio,
30 Item.AudienceRating,
31 Item.AudioFormat,
32 Item.Author,
33 Item.Binding,
34 Item.Brand,
35 Item.CatalogNumberListElement,
36 Item.Category,
37 Item.CEROAgeRating,
38 Item.ClothingSize,
39 Item.Color,
40 Item.Creator,
41 Item.Director,
42 Item.EAN,
43 Item.EANListElement,
44 Item.Edition,
45 Item.EISBN,
46 Item.EpisodeSequence,
47 Item.ESRBAgeRating,
48 Item.Feature,
49 Item.Format,
50 Item.Genre,
51 Item.HardwarePlatform,
52 Item.HazardousMaterialType,
53 Item.IsAdultProduct,
54 Item.IsAutographed,
55 Item.ISBN,
56 Item.IsEligibileForTrade,
57 Item.IsMemorabilia,
58 Item.IssuesPerYear,
59 Item.ItemDimensions,
60 Item.ItemPartNumber,
61 Item.Label,
62 Item.Langauge,
63 Item.LegalDisclaimer,
64 Item.ListPrice,
65 Item.MagazineType,
66 Item.Manufacturer,
67 Item.ManufacturerMaximumAge,
68 Item.ManufacturerMinimumAge,
69 Item.ManufacturerPartsWarrantyDesc,
70 Item.MediaType,
71 Item.Model,
72 Item.ModelYear,
73 Item.MPN,
74 Item.NumberOfDiscs,
75 Item.NumberOfIssues,
76 Item.NumberOfItems,
77 Item.NumberOfPages,
78 Item.NumberOfTracks,
79 Item.OperatingSystem,
80 Item.PackageDimensions_Height,
81 Item.PackageDimensions_Height_Units,
82 Item.PackageDimensions_Length,
83 Item.PackageDimensions_Length_Units,
84 Item.PackageDimensions_Weight,
85 Item.PackageDimensions_Weight_Units,
86 Item.PackageDimensions_Width,
87 Item.PackageDimensions_Width_Units,
88 Item.PackageQuantity,
89 Item.PartNumber,
90 Item.PictureFormat,
91 Item.Platform,
92 Item.ProductGroup,
93 Item.ProductTypeName,
94 Item.ProductTypeSubcategory,
95 Item.PublicationDate,
96 Item.Publisher,
97 Item.RegionCode,
98 Item.ReleaseDate,
99 Item.RunningTime,
100 Item.SeikodoProductCode,
101 Item.Item_Size,
102 Item.SKU,
103 Item.Studio,
104 Item.SubscriptionLength,
105 Item.Title,
106 Item.TrackSequence,
107 Item.TradeInValue,
108 Item.UPC,
109 Item.UPCListElement,
110 Item.Warranty,
111 Item.WEEETaxValue
112 FROM
113 XMLTABLE
114 (
115 XMLNAMESPACES(DEFAULT 'http://webservices.amazon.com/AWSECommerceService/2011-08-01'),
116 '//OperationRequest/Errors/Error
117 | //Items'
118 PASSING get_document()
119 COLUMNS
120 Id FOR ORDINALITY,
121 Code VARCHAR2(0050) PATH 'Code',
122 Message VARCHAR2(4000) PATH 'Message',
123 IsValid VARCHAR2(005) PATH 'Request/IsValid',
124 Item XMLTYPE PATH 'Item'
125 ) Items
126 LEFT JOIN
127 XMLTABLE
128 (
129 XMLNAMESPACES(DEFAULT 'http://webservices.amazon.com/AWSECommerceService/2011-08-01'),
130 '/Item'
131 PASSING
132 Items.Item
133 COLUMNS
134 Id FOR ORDINALITY,
135 ASIN VARCHAR2(0010) PATH 'ASIN',
136 DetailPageURL VARCHAR2(0256) PATH 'DetailPageURL',
137 ItemLink XMLTYPE PATH 'ItemLinks/ItemLink',
138 SmallImage_URL VARCHAR2(0256) PATH 'SmallImage/URL',
139 SmallImage_Height NUMBER(4) PATH 'SmallImage/Height',
140 SmallImage_Height_Units VARCHAR2(0006) PATH 'SmallImage/Height/@Units',
141 SmallImage_Width NUMBER(4) PATH 'SmallImage/Width',
142 SmallImage_Width_Units VARCHAR2(0006) PATH 'SmallImage/Width/@Units',
143 MediumImage_URL VARCHAR2(0256) PATH 'MediumImage/URL',
144 MediumImage_Height NUMBER(4) PATH 'MediumImage/Height',
145 MediumImage_Height_Units VARCHAR2(0006) PATH 'MediumImage/Height/@Units',
146 MediumImage_Width NUMBER(4) PATH 'MediumImage/Width',
147 MediumImage_Width_Units VARCHAR2(0006) PATH 'MediumImage/Width/@Units',
148 LargeImage_URL VARCHAR2(0256) PATH 'LargeImage/URL',
149 LargeImage_Height NUMBER(4) PATH 'LargeImage/Height',
150 LargeImage_Height_Units VARCHAR2(0006) PATH 'LargeImage/Height/@Units',
151 LargeImage_Width NUMBER(4) PATH 'LargeImage/Width',
152 LargeImage_Width_Units VARCHAR2(0006) PATH 'LargeImage/Width/@Units',
153 ImageSet XMLTYPE PATH 'ImageSets/ImageSet',
154 Actor XMLTYPE PATH 'ItemAttributes/Actor',
155 Artist XMLTYPE PATH 'ItemAttributes/Artist',
156 AspectRatio VARCHAR2(0020) PATH 'ItemAttributes/AspectRatio',
157 AudienceRating VARCHAR2(0020) PATH 'ItemAttributes/AudienceRating',
158 AudioFormat XMLTYPE PATH 'ItemAttributes/AudioFormat',
159 Author XMLTYPE PATH 'ItemAttributes/Author',
160 Binding VARCHAR2(0050) PATH 'ItemAttributes/Binding',
161 Brand VARCHAR2(4000) PATH 'ItemAttributes/Brand',
162 CatalogNumberListElement XMLTYPE PATH 'ItemAttributes/CatalogNumberList/CatalogNumberListElement',
163 Category XMLTYPE PATH 'ItemAttributes/Category',
164 CEROAgeRating VARCHAR2(0020) PATH 'ItemAttributes/CEROAgeRating',
165 ClothingSize VARCHAR2(0050) PATH 'ItemAttributes/ClothingSize',
166 Color VARCHAR2(0100) PATH 'ItemAttributes/Color',
167 Creator XMLTYPE PATH 'ItemAttributes/Creator',
168 Department VARCHAR2(0050) PATH 'ItemAttributes/Department',
169 Director XMLTYPE PATH 'ItemAttributes/Director',
170 EAN NUMBER(15) PATH 'ItemAttributes/EAN',
171 EANListElement XMLTYPE PATH 'ItemAttributes/EANList/EANListElement',
172 Edition VARCHAR2(0020) PATH 'ItemAttributes/Edition',
173 EISBN XMLTYPE PATH 'ItemAttributes/EISBN',
174 EpisodeSequence VARCHAR2(0020) PATH 'ItemAttributes/EpisodeSequence',
175 ESRBAgeRating VARCHAR2(0020) PATH 'ItemAttributes/ESRBAgeRating',
176 Feature XMLTYPE PATH 'ItemAttributes/Feature',
177 Format XMLTYPE PATH 'ItemAttributes/Format',
178 Genre VARCHAR2(0050) PATH 'ItemAttributes/Genre',
179 HardwarePlatform VARCHAR2(0020) PATH 'ItemAttributes/HardwarePlatform',
180 HazardousMaterialType VARCHAR2(0050) PATH 'ItemAttributes/HazardousMaterialType',
181 IsAdultProduct VARCHAR2(0005) PATH 'ItemAttributes/IsAdultProduct',
182 IsAutographed VARCHAR2(0005) PATH 'ItemAttributes/IsAutographed',
183 ISBN VARCHAR2(0013) PATH 'ItemAttributes/ISBN',
184 IsEligibileForTrade VARCHAR2(0005) PATH 'ItemAttributes/IsEligibileForTrade',
185 IsMemorabilia VARCHAR2(0005) PATH 'ItemAttributes/IsMemorabilia',
186 IssuesPerYear VARCHAR2(0050) PATH 'ItemAttributes/IssuesPerYear',
187 ItemDimensions XMLTYPE PATH 'ItemAttributes/ItemDimensions',
188 ItemPartNumber VARCHAR2(0255) PATH 'ItemAttributes/ItemPartNumber',
189 Label VARCHAR2(4000) PATH 'ItemAttributes/Label',
190 Langauge XMLTYPE PATH 'ItemAttributes/Languages/Langauge',
191 LegalDisclaimer VARCHAR2(4000) PATH 'ItemAttributes/LegalDisclaimer',
192 ListPrice VARCHAR2(0020) PATH 'ItemAttributes/ListPrice',
193 MagazineType VARCHAR2(0020) PATH 'ItemAttributes/MagazineType',
194 Manufacturer VARCHAR2(4000) PATH 'ItemAttributes/Manufacturer',
195 ManufacturerMaximumAge VARCHAR2(0050) PATH 'ItemAttributes/ManufacturerMaximumAge',
196 ManufacturerMinimumAge VARCHAR2(0050) PATH 'ItemAttributes/ManufacturerMinimumAge',
197 ManufacturerPartsWarrantyDesc VARCHAR2(4000) PATH 'ItemAttributes/ManufacturerPartsWarrantyDesc',
198 MediaType VARCHAR2(0020) PATH 'ItemAttributes/MediaType',
199 Model VARCHAR2(0100) PATH 'ItemAttributes/Model',
200 ModelYear NUMBER(4) PATH 'ItemAttributes/ModelYear',
201 MPN VARCHAR2(0255) PATH 'ItemAttributes/MPN',
202 NumberOfDiscs NUMBER(3) PATH 'ItemAttributes/NumberOfDiscs',
203 NumberOfIssues NUMBER(3) PATH 'ItemAttributes/NumberOfIssues',
204 NumberOfItems NUMBER(7) PATH 'ItemAttributes/NumberOfItems',
205 NumberOfPages NUMBER(4) PATH 'ItemAttributes/NumberOfPages',
206 NumberOfTracks NUMBER(3) PATH 'ItemAttributes/NumberOfTracks',
207 OperatingSystem VARCHAR2(20) PATH 'ItemAttributes/OperatingSystem',
208 PackageDimensions_Height NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Height',
209 PackageDimensions_Height_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Height/@Units',
210 PackageDimensions_Length NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Length',
211 PackageDimensions_Length_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Length/@Units',
212 PackageDimensions_Weight NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Weight',
213 PackageDimensions_Weight_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Weight/@Units',
214 PackageDimensions_Width NUMBER(6) PATH 'ItemAttributes/PackageDimensions/Width',
215 PackageDimensions_Width_Units VARCHAR2(0018) PATH 'ItemAttributes/PackageDimensions/Width/@Units',
216 PackageQuantity NUMBER(5) PATH 'ItemAttributes/PackageQuantity',
217 PartNumber VARCHAR2(0100) PATH 'ItemAttributes/PartNumber',
218 PictureFormat XMLTYPE PATH 'ItemAttributes/PictureFormat',
219 Platform XMLTYPE PATH 'ItemAttributes/Platform',
220 ProductGroup VARCHAR2(0050) PATH 'ItemAttributes/ProductGroup',
221 ProductTypeName VARCHAR2(4000) PATH 'ItemAttributes/ProductTypeName',
222 ProductTypeSubcategory VARCHAR2(50) PATH 'ItemAttributes/ProductTypeSubcategory',
223 PublicationDate VARCHAR2(20) PATH 'ItemAttributes/PubliucationDate',
224 Publisher VARCHAR2(0255) PATH 'ItemAttributes/Publisher',
225 RegionCode VARCHAR2(20) PATH 'ItemAttributes/RegionCode',
226 ReleaseDate VARCHAR2(20) PATH 'ItemAttributes/ReleaseDate',
227 RunningTime VARCHAR2(20) PATH 'ItemAttributes/RunningTime',
228 SeikodoProductCode VARCHAR2(50) PATH 'ItemAttributes/SeikodoProductCode',
229 Item_Size VARCHAR2(50) PATH 'ItemAttributes/Size',
230 SKU VARCHAR2(0255) PATH 'ItemAttributes/SKU',
231 Studio VARCHAR2(0255) PATH 'ItemAttributes/Studio',
232 SubscriptionLength VARCHAR2(20) PATH 'ItemAttributes/SubscriptionLength',
233 Title VARCHAR2(4000) PATH 'ItemAttributes/Title',
234 TrackSequence VARCHAR2(0100) PATH 'ItemAttributes/TrackSequence',
235 TradeInValue VARCHAR2(4000) PATH 'ItemAttributes/TradeInValue',
236 UPC NUMBER(12) PATH 'ItemAttributes/UPC',
237 UPCListElement XMLTYPE PATH 'ItemAttributes/UPCList/UPCListElement',
238 Warranty VARCHAR2(4000) PATH 'ItemAttributes/Warranty',
239 WEEETaxValue VARCHAR2(0100) PATH 'ItemAttributes/WEEETaxValue'
240 ) Item
241 ON
242 1 = 1
243 ORDER BY
244 Items.Id,
245 Item.Id;
Table created -
Pro Debug Event - Error 290 /tick time
Suddenly a project I was working (and all the auto-saved folders) could not open anymore by giving me the following message: "Pro Debug Event - error 290 tick time"
Whenever you enounter an error, as a general rule, search the forum to see if it's already been addressed, or to join the discussion:
TickTime.cpp-290 error after opening a specific project | Premiere CC 2014.2 | Windows 8.1
Also, I always convert/ingest my media to use the same format that runs natively in PPro and does not require conforming.
Second, with regards to losing work with projects that can't be fixed. I always save my projects incrementally to new names as I go. When I hit an issue that cannot be resolved (and occasionally I do), I reopen the previously saved project and try something else. In fact today I hit a stack error. It was a three-day edit, and I was on version "(project name)_028.prproj" I just opened up the previous version "..._027.prproj", repeated the few edits that I lost in "028" and rendered without error. Follow that?
Anyway, read the link above for a possible fix. -
Can uninstalling and installing CS4 fix the debug event error message?
Hello,
Can uninstalling and installing cs4 solve the debug event error message?Can uninstalling and installing cs4 solve the debug event error message?
Well, that DOES seem to be the scripted mantra of Adobe TS in some out of the way country. According to most reports, that cures everything from trying to Capture over a USB cable to working with footage from your cellphone camera. In most cases, it has cured very little, though maybe the Debug Event error IS something that will be fixed by this.
Good luck,
Hunt -
I am facing problem document creation the error is Message no. 3G103
i am facing problem document creation the error is Message no. 3G103
Dear Satish,
Usually this error is due to a wrong customizing.
Go through note 1594322 and 179655 will help you to make an analysis of this issue, you should created an excel file for each wage type which should be posted as it is showed in the note.
1594322 Error message 3G103 in RPCIPE00 & RPCIPE01 'Posting balance is
not cleared' 179655 RPCIPE00:Rejectn, employee w.posting bal.not clrd
Best Regards,
Deepak. -
we added a new subscriber to our cluster, which appears to be fine, however an existing subscriber is now showing the following message in the event log.
Error: kCtiProviderOpenFailure - CTI application failed to open provider
CTIconnectionId: 52522
Login User Id: CCMSysUser
Reason code.: -1932787613
IPAddress:
App ID: Cisco CTIManager
Cluster ID: CCM20827-Cluster
Node ID: 172.21.0.4
Explanation: Application is unable to open provider.
Recommended Action: Check the reason code and correct the problem. Restart CTIManager if problem persists..
can anyone offer any insight, on whats causing this, or where to find out what the reason code actually means.
TaHi Grant,
Here is a description of the event error, but I'll be darned if I can figure out what the reason code actually means.
Error Message: %CCM_CTI-CTI-3-kCtiProviderOpenFailure:
CTI application failed to open provider CTIconnectionId [Long], Login User Id [String], Reason code. [ ], IPAddress [String]
ExplanationThe application is unable to open a provider.
Recommended ActionCheck the reason code and correct the problem. Restart CTIManager if the problem persists.
This table displays the Enum definitions and reason codes.
Value
Definition
0
Unknown
0x8ccc0075
Directory response timeout
0x8ccc0060
Login Failed
0x8ccc005e
Directory unavailable
4
Undefined Line for authentication
5
User is deleted
6
Unknown
From this doc:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080111ac2.shtml#topic1
Hope this helps! Sorry I can't decipher this any further for you.
Rob
Please remember to rate helpful posts.......
Maybe you are looking for
-
Logic 9 Issue Triggering Wrong 3rd Party Samples
I know the question says 3rd party but bear with me because I have ruled out issues with the 3rd party libraries and players. This is my Issue: So far no one from 8dio, Native Instruments, or Apple can fix this and I am completely out of ideas. I rec
-
How do I make a scanned document editable?
Is there an app (or program) already on my Mac that allows me to edit a scanned document, or to scan directly into Pages or Word For Mac? I don't mind purchasing a program, if necessary, but it seems Mac has lots of functionalities built in... if yo
-
what is the difference between report and script
-
How do I get my Horizontal Spry menu bar tabs to be varying widths (dependent on content). I know it's possible, just can't find it. I know how to change the width of the bar, and make the tabs a uniform width, but how do I change the individual tab
-
My Adobe reader is not responding or working
My Adobe reader is not responding or working can amybody help me saying somthing wrong with my pdf files or zipfiles Never had this problem before!! Can anybody rescue me. I cannot use my PDF files pissing me off Michael Ladd