Asset Depreciation - Depreciation to the date + Percentage from useful life

Hi Asset Accounting Experts,
I have a business requirement for depreciation as follows in depreciation calculation.
Aquisition Month    : Depreciation to the date
remaining Months   : Straight Line Depreciation - Ordinary: percentage from useful life
Retirement Month   : Depreciation To the date
Eg: Aquisition value = 12000     Useful Life 10 years i.e Depreciation per month 100
Asset Aquired in 20.01.2009 (Period 1)
Retired in 12.04.2009 (Period 4)
Depreciation should post as follows
Period 1 - 100*11/31 =   35.48
Period 2 -                      100.00
Period 3 -                      100.00
Period 4 - 100*12/30 =   40.00
I would really greatful if someone can help me on this.
Thanks in advance.
Chandimal

Hi,
You can define this in your depreciation key.
Check depreciation to day check box. System will calculate the depreciation from date of capitalization if you have define multilevel method , depreciation from capitalisation date. Also choose base method depreciation from useful life. Define life in Asset master , post the entry and check the depreciation behaviour.
Check with this system will post the depreciation as per your requirement.
Regards
pankaj Pandey

Similar Messages

Complete Depreciation in the Last Year of Useful life

I am trying to create following scenario in SAP using declining balance method where the percentage is calculated from the useful life...example below;
A printer has APC of 100 TRY and itu2019s useful life is 3 years,
The depreciation percentage is calculated as 1/3 = 0.33 * 2 = 0.66
However if the percentage rate is greater than 50% than 50% is the maximum taken as the annual percentage rate.
2010u2019s depreciation = 100*50%=50 TRY (NBV balance 50 TRY)
2011u2019s depreciation = 50*50%=25 TRY (balance 25 TRY)
2012u2019s depreciation =25 TRY (last yearu2019s depreciation = net book value u2013 accumulated depreciation)
When trying to replicate this scenario in the system; it does the following;
2010u2019s depreciation = 100*50%=50 TRY (NBV balance 50 TRY)
2011u2019s depreciation = 50*50%=25 TRY (balance 25 TRY)
2012u2019s depreciation =12.5 TRY
2013u2019s depreciation = 12.5 TRY
Even though the useful life of the asset is only 3 years u2013 it carries forward the remaining depreciation to the next fiscal year...this is not what I want. Do you know if there is a parameter in the depreciation key that forces the final year of useful life to take the remaining depreciation amount.

Hi Bernard,
Yes - I have a changeover applied in my first phase to "changeover at end of useful life" then in the next phase I have "changeover in planned life" with immediate depreciation.
The problem with this is that the remaining depreciation is only applied in the next year...however I need it to be applied in the last year fo useful life. The changeover options do not allow for "changover within planned life" unless a percentage is supplied for when net book value reaches a certain percentage.
However, I cannot determine a percentage as the useful life of my assets will always change...resulting in the NBV percentage to be different by asset class..
If there is a way to do this without activating the BADI that would be great.
Regards
S.Vekaria

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to find the data loaded from r/3 to bw

hi
how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild and table the data is comming from . plz help
thanks in advance to u all

Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
Good job
GFV

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?

I have updated my mac from snow leopard to mountain lion 3 days back. I had some important data in my library folder and it got overwritten. Is there any way i can get the data back from my snow leopard library folder?
I tried mackeeper to recover files but it could not. Any other way any one has tried to recover a system library folder after OS upgrade?

No, it doesn't store a clone. You would have needed to make one with either SuperDuper or CarbonCopy Cloner.
If the files were in your ~/Library folder then they may still be there. As I said, you can access it by
going to your Finder "Go" menu hold the option key to choose "Library". I wouldn't think an upgrade would overwrite anything in ~/Library.
If you have a Time Machine backup you may also be able to use that to retrieve them.

How can I get the data back from my game

How can I get the data back from minecraft if I deleted the app and bought with a different Apple ID

No, they are tied to the ID that purchased them, and cannot be transferred to anyone else.

How to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format

Hi All,
I have a requirement in my project like to convert the date time from one format to another.my situation is like to convert the date time from MM-DD-YYYThh:mm:ss to YYYY-MM-DDThh:mm:ss format. I am using the soa suite 11.1.1.6.
Can any one suggest me how to convert in the BPEL transformation.
Thanks,
Sanju.

Hi Sanju,
Store the date to be converted into a variable viz. dateVar. Now, process an expression in assign as: xp20:format-dateTime($dateVar,'[Y0001]-[M01]-[D01] [h]:[m01]:[s01]').
Regards

Client automatically cache the data got from cache server?

Hi expert,
I have 2 questions about the client local cache. Would you please help to give me some suggestion？
1. Will client automatically locally cache the data got from cache server the first time and automatically update the data in local cache when getting the same data from cache server again? I go through the API reference but cannot find any API to query the data currently cached in the local cache.
2. If client will automatically cache the data got from cache server. Is there any way for a client to get the data event that happens to its local cache, such as entry created in local cache, entry deleted from local cache and entry updated in local cache? In my opinion, when getting an entry from cache server the first time, the MapListener's entry create event should be triggered. When getting the same entry again, the entry update event should be triggered.
However, I have tried a client with replicated cache, a client with partitioned cache, an extend client with remote cache and a client with local cache(front cache part of near cache), the client (the NamedCache object has been set the MapListener) cannot get any event notification after getting data from cache server. By the way, my listener is OK since when putting data the entry create event and entry update event will be triggered.
Your suggestion is very appreciated. :)

Hi
If I were you I would read this http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/toc.htm
and particularly the section about Near Caching here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/nearcache.htm#CDEFEAJG
which is what you are asking about in your question.
Near Caching is how Coherence stores data in the locally - which is the answetr to your first question. How Near Caching works is explained in the documentation.
Events, which you ask about in your second question are explained here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/delivereventsjava.htm#CBBIIEFA
It might be that ContinuousQueryCache is closer to what you want. This is explained here http://download.oracle.com/docs/cd/E14526_01/coh.350/e14510/queryabledatafabric.htm#sthref38 A ContinuousQueryCache is like having a sub-set of the underlying cache on the local client which you can then listen to etc...
JK

How to get the date starting from 1 to the current date from the system dat

Dear all,
Please tell me how to get the date starting from 1 based on the system date
and it should come with respect of time also.
example.
suppose today is 6 Dec, 2006
so ABAP report should find the 1 dec. 2006.
Please help me as soon as possible.
Regards,

concatenate sy-datum0(2) '01' sy-datum4(4) into v_firstdate.
or yo ucan use the fm:
HR_JP_MONTH_BEGIN_END_DATE
usage:
    call function 'HR_JP_MONTH_BEGIN_END_DATE'
         exporting
              iv_date             = sy-datum
         importing
              ev_month_begin_date = gv_begda
              ev_month_end_date   = gv_endda.
Regards,
Ravi
Message was edited by:
        Ravi Kanth Talagana

How can i use an ao card (pci 6723) to output data and to trigger an ai o acquire the data coming from the ao card?card (pci 6254) t

Hello
I am trying to perform AO (pci 6723) and to trigger my AO card (pci
6254) to read the data coming from the AO card. I am using LV7,1,
win2000.
Is an RTSI cable necessary or I can connect the trigger signals externally ?
I am using the LV example " multi function - synch ai-ao.vi" but i can't for some reason configure the trigger lines.
thank you in advance for your time.
Yiannis

Hello Yiannis,
If I understand you correctly, you want to synchronize your analog input and analog output that are started by a trigger on the analog input board. If you don't want to use the RTSI lines, your best bet is to export the AI Sample Clock and then read it in to the AO board. There is an example on ni.com called DAQmx - Synchronized AIAO Shared Clock. It appears to be having techincal issues so I have attached the example below. To export ai/sampleclock, use DAQmx Export Signal.vi after Get Terminal Name with Device Prefix.vi. Export Sample Clock to PFI3 (There are only connections between the sample clock and PCI3/4/8/9). Connect PFI3 on your AI board to PFI0 on your AO board (with a wire). Then change the source for the AO Timing.vi to Devx/PFI0. If you want to do triggering, stick the DAQmx Trigger.vi between the Timing property node and the DAQmx Start.vi on the AI task. I have shown how to do this in the modified version below. Please take a look at it and let me know if you have any questions. If you still get an error please take a screenshot of it and post to the forum. Have a great day!
Sincerely,
Marni S.
Attachments:
Synchronized_AIAO_Shared_Clock[Modified].vi ‏140 KB

Pass the data back from the jsp page to the java code

Hi,
I have written an iView that receives an event using EPCF and extracts data from the client data bag.
I need this iView to pass the data back from the jsp page to the java code.
I am trying to do this using a hidden input field, but I cannot get the code to work.
Here is the code on the jsp page.
<%@ taglib uri="tagLib" prefix="hbj" %>
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
   <hbj:form id="myFormId">
<hbj:inputField id="myInputField" type="string" maxlength="100" value="" jsObjectNeeded="true">
<% myInputField.setVisible(false);%>
</hbj:inputField>
   </hbj:form>
</hbj:page>
</hbj:content>
<script language=JavaScript>
EPCM.subscribeEvent("urn:com.peter", "namedata", window, "eventReceiver");
function eventReceiver(eventObj) {
     var url = eventObj.dataObject;
     var funcName = htmlb_formid+"_getHtmlbElementId";
     func = window[funcName];
     var ipField = eval(func("myInputField"));
     ipField.setValue(url);
     var form = document.all(htmlb_formid);
     form.submit();
</script>
Here is my java code
package com.sap.training.portal;
import com.sapportals.htmlb.InputField;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent;
public class ListSalesOrder extends PageProcessorComponent {
public DynPage getPage(){
    return new ListSalesOrderDynPage();
public static class ListSalesOrderDynPage extends JSPDynPage{
     private String merong;
    public void doInitialization(){
    public void doProcessAfterInput() throws PageException {
          InputField reportfld = (InputField) getComponentByName("myInputField");
          if (reportfld != null)      merong = reportfld.getValueAsDataType().toString();
    public void doProcessBeforeOutput() throws PageException {
          if ( merong != null ) setJspName("merong.jsp");
          else setJspName("ListSalesOrder.jsp");
Here is DD
<?xml version="1.0" encoding="utf-8"?>
<application>
<application-config>
    <property name="SharingReference" value="com.sap.portal.htmlb"/>
    <property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
    <component name="SearchSalesOrder">
      <component-config>
        <property name="ComponentType" value="jspnative"/>
        <property name="JSP" value="/pagelet/SearchSalesOrder.jsp"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
    <component name="ListSalesOrder">
      <component-config>
        <property name="ClassName" value="com.sap.training.portal.ListSalesOrder"/>
      </component-config>
      <component-profile>
        <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
      </component-profile>
    </component>
</components>
<services/>
</application>
After receive event, then call java script function "eventReceiver" and call "form.submit()".
But .. PAI Logic in Java code doesn't called ...
Where is my problme ?
Help me ...
Regards, Arnold.

Hi Arnold,
you should not do a form.submit yourself. Instead you can put a component called ExternalSubmit to your page:
ExternalSubmit exSubmit = new ExternalSubmit("EX_SUBMIT"));
exSubmit.setServerEventName("MyEvent");
This results in a java script funtion on the page which is called "_htmlb_external_submit_". If you call this function the the form gets submitted and your event handler is called.
regards,
Martin

How we can automate the data loading from BI-BPC

Dear Guru's
Thanks for watching this thread,my question is
How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
How we can automate the data loading from BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
Thanks in Advance,
Srinivasan.

Here are some options
1) Use standars packages and schedule them :
A) Openhub masterdata file into a flat file/ BPC App server and Schedule the package - Import Master Data from a Data File and other relevent packages.
2 ) Using Custom Tasks in Custom Packages ( SSIS)
Procedure
From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
Create a new package, or select an existing package to modify.
Choose Task Register Custom Task .
In the Task Location field, browse for the target .dll file.
Note
By default, the .dll files are stored in BPC/Websrvr/bin.
End of the note.
Enter a task description, select an appropriate icon, then click OK.
Drag the icon to the designer window. Enter data as required.
Save the package.

How to store the data captured from oscilloscope into the MS Access database table

Hi All,
In my application, I tried to save the data captured from SCOPE, but could store only 200 bytes. I've taken the Memo data type for the field in database. I want to store all data ( 4 channels) in one field & retrieve back and display on the XY Graph.
Thanks in advance.
Regards,
Shrini

kramish wrote:
Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
just doing a quick Google came up with some pages:
http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
Kaj

Transaction FPO4 - where the data comes from?

Welcome members,
as I am new in SAP, and found a lot of usefull information here, I put my first question today... wel...
I need to make a VISO report with the result of receivables for all liquide BuCo minus all payments are made until a specified date by country.
Well, I was said how to obtain the data. Just using FPO4 open balance list. I see the report result with the data I need in column Loc.curr.amount per country. But My question is: from which table this data is taken or how it is counted in the abap code? I am trying to debug the program, but it seems to be difficult for me to find the right table or tables.. Could you help me? I need to find the part of code I can modified to my report to display the same value...
Roman

Hi Giri,
thank you for your answer. Finally I found the table too, but as I have only a little experiences, I dont know how to get the rights result..
I can see as a results of the transaction Item list FI-CA at key date. There are lins devided per country (sign **) and "Loc.curr.amount". This "Loc.curr.amount" i need to obtain in another report, but I do not know how to get this value from the table DFKKOP...
I feel lost..

Read the data's from a device

Any one can give a idea abt:
how to read the data's from device using teststand

duplicate: http://forums.ni.com/t5/NI-TestStand/read-the-device/m-p/2582343/highlight/false#M43213
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Asset Depreciation - Depreciation to the date + Percentage from useful life

Similar Messages

Maybe you are looking for