Asset Depreciation Shut down

Hi SAP Guru
I want some information regarding How to stop for particular period to the asset? THis purpose we have one field in Asset master data.e.g. Asset Shutdown.
If i select this option where Can i get the report?
Or When I am running the depreciation I have to select this option for particular Asset?
plz clearify above the sam.
Regards
Amar

When you create new record the date is to 31.12.9999.
When you create a new line form 01.01.2009 result is
Old line   xx.xx.xxxx to 31.12.2008
New line  01.01.2009 to 31.12.9999.
Perhaps you have to create a thirt line after the second one
Old New line  01.01.2009 to 31.12.9999. 
Old New line  01.01.2009 to  31.05.2009 .
New line        01.06.2009 to  31.12.9999
Note:
When you have a simple depreciation key like LINR this is working, but for some depreciation key it is possible that the values for after the shut down are not correct.
Edited by: Paul Annotee on Dec 22, 2008 2:15 PM

Similar Messages

  • How can i shut down depreciation for an Asset for few days??

    Hi Friends,
    How can i shut down depreciation of a particular Asset for few days say 5 days??
    I have done the necessary changes in Time dependent tab like checked asset shut down and in AFAMA i changed the shut dawn as YES.
    The only problem i am in is "how can i maintain the 5 days like from 10.05.2009 to 14.05.2009
    If i go to MORE INTERVALS then only From date is available over there.There is no To date opition.
    How can i maintain To Date??
    Plz suggest.
    Regards,
    Sumaya

    Hi
    Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
    In asset master data
    Go to time dependent terms,
    Define the appropriate time interval for shutdown
    Set the shutdown indicator
    The system does not calculate the depreciation for the shut down period,
    The useful life of the asset will increase to the extent of shutdown period.
    When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
    Regards
    Tanmoy

  • Asset Shut down Process

    Hi
    Can anyone explain the Asset Shut down process in SAP?  The business requirement is to stop depreciatin depreciation for a time period if the asset relates to product specific machine and is currently not in use.  Start depreciating the Asset again when it is put to use
    I checked the Asset Shut down process (checkbox in Asset master) and changing Dep key to 0000. System does not calculate depreciation for the time interval i give in shut down period but once i uncheck the box and change dep key, system posts depreciation for the current period as well as for the period it was shut down
    Is there a way to avoid depreciation posting for the period it is shut down?  Am i missing something here or the correct process will be to to do an asset transfer to a non-depreciable asset class for shut down period and then again bring it back to original asset class
    Please advice
    Shiv

    Hi PAul
    Thanks for the response.  I did check Asset Shutdown checkbox on the time dependent tab and in addition changed the depreciation key.  With this setting system do not calculate depreciation when i run AFAB.  The moment i uncheck this box, system posts depreciation even for the shut down period.  Is there a way to avoid depreciation for the period when it was shut down even after unchecking the Asset shut down check box
    Thanks
    Shiv

  • Asset Shut down

    Hi Gurus,
    When the asset is shutdown in a particular period, the depren is calculated only upto the previous month. For eg. if we shut down the asset in May'07, the system should calculate in May & then stop from June' 07.
    Is there any way to achieve this other than maintaining intervals in the asset master record ?
    Rgds,
    NK

    Hi,
    I think you can maintain the useful life of the asset in the asset master. Just note that if a useful life is not entered in the asset class, and you use depreciation keys that calculate automatically, this field is a required entry regardless of the settings in the screen layout control.
    You can change the Useful life of the individual asset irrespective of the life set in the asset class.
    Let me know if it works.
    Regards
    Sridhar

  • Premier Pro shuts down the second I mouse over the preview of an asset. Whats wrong?

    I am new to Premier Pro and am using a Mac Book Air with Windows installed.
    As soon as I create a new project and import the assets (the "Eagles Documentary" example), the whole thing shuts down when I mouse over the assets to see them move.
    Any ideas???

    Please provide the system info and other data points requested here: FAQ: What information should I provide when asking a question on this forum?

  • Mass shut down assets.

    Hi All,
    Currently I can shut down asset one by one in AS02. Is there any easier way to mass shut down assets? Should I have to use LSMW?
    Thank you and good day
    Emma

    Hi,
    you can execute a mass retirement, which is the developed functionality for that. Please search the documentation at http://help.sap.com, it is documented there.
    Regards,
    Markus

  • Asset depreciation block

    HI
    Is it possible to stop depreciation some of the assets under one particular asset class?
    can any one  help me
    Thanks & Regards
    phaneendra
    Edited by: phaneendra Reddy on May 6, 2009 8:18 AM

    Hi
    Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
    In asset master data
    Go to time dependent terms,
    Define the appropriate time interval for shutdown
    Set the shutdown indicator
    The system does not calculate the depreciation for the shut down period,
    The useful life of the asset will increase to the extent of shutdown period.
    When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
    Regards
    Tanmoy

  • HT5129 I have 30+ iPhoto Libraries, so every time I open one, iphoto wants to copy the 3 events I had out there when MobileMe shut down. Those 3 events are saved in the appropriate iPhoto libraries. Wish I had deleted them on MobileMe! How do I turn this

    I have 30+ iPhoto Libraries, so every time I open one, iPhoto wants to copy the 3 events I had out there when MobileMe shut down. Those 3 events are already saved in the appropriate iPhoto libraries. Wish I had deleted them on MobileMe! How do I turn this process off?

    As Larry mentioned I use a different DAM (digital asset management) appliclation, Media Pro 1. For other possible DAM apps visit  The DAM Forum which is for professional photographers.  There the various apps are discussed along with workflows.  If nothing else you'll get some good information on managing digital "negatives".
    Media Pro lets you manage the folder organization of your photos and write metadata, keywords, titles, and other metadata directly back to the files.  No matter what app you go with have a backup plan in place to keep current backups of your source photos on separate hard drives.

  • DOWN PAYMENT REQUEST - asset number on down payment request.

    Concerning this request, you must know that we should use a 'dummy asset number' because down payments are not depreciable.
    With this dummy asset number (which is not depreciable); we have to :
    -validate the down payment request
    - generate the automatic payment, with the right dummy asset number.
    Right now, the program takes the down payment of the purchase order but not the dummy one.
    Does someone have already handle with this case ? The difficulty is to manage with the automatic payment run. Is still existing a BTE ?

    Hi,
    Create an AUC asset master and try to post down payment to that asset.
    Thanks,
    Srinu

  • Asset Depreciation fun in special posting period

    Dear Gurus,
    Recently my Finance Manager decided to hv a cut-off date for all the FI transaction on 14-Dec-2007.
    These are the rules:
    1.) All the FI transaction < 14-Dec-2007 posted in period 12
    2.) All the FI transaction Between 15-Dec-2007 and 31-Dec2007 will be posted in special posting period 14.
    3.) All year-end adjustment will be carried out in posting period 16.
    My problems are:-
    1.) How can i proceed the Asset depreciation run for period 12 and special period 14.
    2.) How the system select or capture the asset doc? By posting date or by posting period?
    3.)If possible pls give some examples when we should use these options and what are the advantages?
       a.) Planned posting run.
       b.) Repeat
       c.) Restart
       d.) Unplanned posting run.
    Thanks.
    Lim J

    1.) How can i proceed the Asset depreciation run for period 12 and special period 14.
    Hi, First of all you need to understand the function of special period.  You need not to mention the spl period of depr. run.
    The system considers period 12 as usual.
    2.) How the system select or capture the asset doc? By posting date or by posting period?
    By posting date.
    3.)If possible pls give some examples when we should use these options and what are the advantages?
    a.) Planned posting run.
           When you run the depr. on regular peiod basis ie., one by one, U choose (a)
    d.) Unplanned posting run.
          When you want to calculate the depr. for some periods as a whole, U choose (d)
    b.) Repeat
         Suppose u ran the depr for Jan.  In Feb. you have capitalised an asset for Jan. So, U have to calculate depr for the new asset for jan.   U choose (b).
    c.) Restart
           When you are running depr. you might have face some uncontrollable problems like power off, server down etc.  In such instances, you choose (c).
    Get back to me. if you are not clear
    Regards ...............SK

  • Premiere Pro CS3 shutting down

    Sorry to ask such a simple question, but I am new to Premiere Pro CS3.  Basically, whenever I start it up, I get to the point of importing some video (a small file), and then it seems like 3 out of 4 times when I try to do anything with the program after the import is complete, it simply shuts down and disappears with no warnings or errors.  I know from experience with Vegas Pro that video editors can be picky and unstable, but this is ridiculous.
    Short of "re installing the program", are there any words of advice of things to check concerning the program (or me) to help keep it running longer than 60 seconds?  It is running on a Win XP32 machine with no other programs running at the same time.
    Thanks in advance for your input.

    Excellent article!
    SYSTEM:
    Let's start with the hardware.  This is a built from scratch PC about 2 -3 years old that I put together for using Vegas Pro and other high end Autodesk programs.  It is a Tyan server motherboard with two AMD Opteron quad core micros (8 cores total) running at a nominal 2.3 Ghz.  Total ram is 8 G of DDR2.  The video card is an ATI FireGL V5200 with 512M of video ram, driving two monitors.  The operating system is Windows XP 32.  It is a dual boot machine, capable of booting into either XP32 or XP x64.  The OS are on a 320G SATA2 hard drive.  The video files are on a striped RAID consisting of two 320G SATA2 hard drives.
    Installed software includes everything from Master Collection CS3, Microsoft Office 2007, and a few other odds and ends.  The antivirus is Kaspersky 2009.
    ASSETS:
    The imported video clip is 80M AVI from a camcorder that plays fine in either Vegas or Windows Media Player.
    WORKFLOW:
    Have not got that far yet!
    Let's start with the simple questions first:  When I get to the initial splash screen "Welcome to Adobe Premiere Pro", pressing either the "Exit" button or the red button with the X in the upper right corner of the splash screen causes the program to shut down.  Is that to be expected?
    Oh, and to the best of my experience, this is the only software from the Master Collection CS3 suite that is having this problem.

  • System shuts down immediately upon build

    My whole computer shuts down immediately upon trying to build a project. It only happens with one project. I can build other projects just fine. I was able to build this project just fine 5 months ago. I deleted the build folder to save space, but have made no other changes since then, other than transferring the project folder to another hard drive. Now every time I try to build the whole computer immediately shuts down.
    My first thought, is somehow an asset went bad, but I have no idea how that could have happened because every thing worked fine five months ago. I can't even determine what causes the crash from the log because it happens immediately. I have tried transferring the project folder to other hard drives, but the same thing occurs. My biggest question is even with a corrupt asset why would the entire system shut down. I would think I would just receive an error message.
    Thoughts on correcting the problem or any information as to what could cause the whole system to shut down would be appreciated. Thank you.

    Jurgen,
    Thanks for your reply.  You are right, the key was in that file. (Volker also pointed me in that direction). For some reason it had a name for my server that was not in my CFTGCP #10.
    WARNING => DpNetCheck: NiHostToAddr(PTC02.PTC) failed (rc=-2)                                                   
    I do not know where it got that address from.  It is close to the correct address but because it was not exactly correct the network access failed.  Once I made the change the jobs stayed up.
    On to to the next problem....
    Alan

  • Captivate shuts down after publishing

    Has anyone experienced Captivate shutting down after
    publishing? This keeps happening to an instructor, and I'm not sure
    of the solution. Is there a preference that I'm not aware of?
    Christine

    Hi Christine
    If mattturley's advice fails to help, you may also want to
    examine the path you are publishing to. I seem to recall that this
    issue can also appear if your output path is too long.
    For example, if your current path is:
    C:\Documents and Settings\Rick Stone\My Documents\My Adobe
    Captivate
    Projects\Cap2InstructorRollovers\Captions\Assets\WonderfulProjects\ThisWonderfulProject
    Try moving it closer to the root, as in:
    C:\CaptivateProjects\MyProject
    Cheers... Rick

  • To shut down or to sleep

    Hi, recently I just bought a macbook (finally switching from pc to mac) and i heard people saying that it will be better if just put the macbook to sleep everyday instead of shutting it down.
    Is that true?

    Welcome to Apple Discussions!
    This is among the oldest debates of computing. And in fact there is a third alternative. Use the Screen Saver in Apple menu -> System Preferences -> Desktop and Screen Saver, and disable Energy Saver in Apple menu -> System Preferences -> Energy Saver for both display and hard drive.
    On the side of sleep:
    1. It conserves energy while running the computer.
    2. It can be used to prolong the times between recharging without closing down applications.
    Against sleep but for shutting down or using screen saver:
    Energy Saver has a bug that some peripherals don't understand the low power mode it puts the peripheral ports into. This primarily affects third party peripherals, but marginal cables that come from fraying can affect Apple peripherals too, and problems with the power management unit or clock battery (after the machine ages 4 years or more) can affect the ability of those ports to get the proper voltage to help some peripherals.
    Against sleep but for shutting down:
    Your hard drive will likely last longer if you transport the machine a lot, and you shut down instead of using sleep.
    Against shutting down a lot:
    The surge that goes through the power manager, or the power button's circuitry when you start up can shorten the life of the power manager and/or the power button. Not that you'd see any significant depreciation for many years, but it is there nontheless.
    Against sleep or shutting down:
    The operating system performs a daily, weekly, and monthly cleanup of log files which can be done from the Terminal application with Anacron or Macjanitor if you really do need to avoid using it in the middle of the night for an extended period of time. It will only do these in the wee hours of the morning.
    Regardless, it is strongly recommended you religiously backup your data*:
    http://www.macmaps.com/backup.html
    - * Links to my pages may give me compensation.

  • I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

    Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
    == This happened ==
    Every time Firefox opened
    == The computer was hard shut down and did a improper shut down scan when it was restarted ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

    I am having a similar problem. Running Xp.
    Latest revision of firefox.
    After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
    I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
    I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

Maybe you are looking for