Asset description change
gurus,
In as02 transaction description field is having length of char50 .which will appear in f4 help of as02 asset field.
here this value come from mcoa1 field having length of char30 only.
so what ever i enter in this description filed is not comming completely.
I need to upload the data again with length of char 30.
i know the fm is BAPI_FIXEDASSET_CHANGE.
kindly sugust the programing steps(i am new to bapi fm usage).
regards,
padmaja
You are in the wrong forum
Similar Messages
-
Equipment description is overlapped by assets description after as02 bdc .
Hi All,
I have problem in AS02 bdc.When transferring the equipment from one plant to another.We run one BDC for changing BUSSINESS AREA , PLANNING PLANT , MATENANCE PLANT IN IE02.After that I am running one BDC for AS02 for changing Plant assignment.Here I am facing the problem for rare cases.The equipment description is overlapped by assets description for rare cases.I am confused about this...<removed by moderator>...Thanx in advance..
Regards
BIbeka
Edited by: Thomas Zloch on Nov 30, 2011 2:02 PMDear:
Your question contains answer ... Please change "Change equipment NO SYNCHRONIZATION" into DIRECT SYNCHRONIZATION AFTER SAVING and also make sure that Synchronization button is on in AS02 for relevant assets in Allocation tab. Please do this and revert back. Please also refer to an excellent article about PM & AA synchronization. Hope it will help you solve your issue.
http://help.sap.com/saphelp_46c/helpdata/en/4f/71db54448011d189f00000e81ddfac/content.htm
Regards -
About the Hierarchy description change to chinese
Hi,
About the Hierarchy,
I want to display the Hierarchy description change to chinese,
I change the Hierarchy description to chinese in Discoverer Administrator,
But the Hierarchy description still show column name in Discoverer Viewer,
If I change the Hierarchy attribute name to chinese in Discoverer Administrator,
and the Hierarchy description still show column name in Discoverer Viewer,
It's important issue for my end user,
so anyone can help me ?
your sincerely,
YehHi Bernhard,
Answer to your Question:
The original setting :
ANLB-PERFY = 12.
T090NA-XDAILY= " "
some one changed the Dep Key with
T090NA-XDAILY= X
I made the below change:
T090NA-XDAILY= " ".
then there is no error for the Asset.
Please let me know how to identify all the assets that have this error. You have mentioned RAAFAR00 'Recalculate depreciation'.
so my understanding is if i run the program the warning for all the assets appear.
Does calculation of Depreciation AFAB report the assets with errors.
Thanks,
Raja. -
Crystal didn't show the BEx query Attributes description changes/Values
We experiencing the BEx query attributes/crystal report issue.
I create a crystal report using BW- BEx query. Bex query displays the attributes values. But in crystal report side it didn;t show up the values as well as description changes.
But If I change the display properties of attributes (different from one attribute to another) the crystal report reflect the values. But crystal report didn't show the Attribute description changes , the one i did it in BEx query side.
Example:
Bex has a Masterdata as well as attribute Field1, Field2 etc.. I changed the description like Field_Test1 and Field_Test2. Also I changed the display property for Field_Test1 is Key and text and long , Field_Test2 is Text & LOng text.
I got the attribute values is crystal report Xi R2. But crystal didn't reflect the description changes?
Suggestions Please?Post your question to the Business Object Integration Kits forum
-
Asset Description missing from Asset dropdown in AS03
Hi
I'm using fm BAPI_FIXEDASSET_CREATE1 to create assets and everything works fine except that those I've created don't have an Asset Description in the dropdown for AS03 - ie table ANLA field MCOA1 is blank. I can't find any way of filling this field in the import or tables parameters of the function module.
Does anyone have any suggestion as to how I can fill this field?
Thanks
BrigitteMCOA1 is automatically built from TXT50 with a TRANSLATE TO UPPER CASE, so fill GENERALDATA-DESCRIPT. (If your system is not up-to-date, look at [Note 1180614 - Creating from posting: Missing asset description in F4 help|https://service.sap.com/sap/support/notes/1180614] (june 2008), in this case you may call ZCORMCOA from old OSS [Note 83864 - Assets without description when using F4 help|https://service.sap.com/sap/support/notes/83864] to correct assets created before note correction)
Regards,
Raymond -
Service Master / Activity Master description change Issue
Dear Experts,
I am facing problem with Service master / Activity Master description change problem.
Steps in the problem -
1) Service Master / Activity Master created.
2) Long term purchase order (with large quantity) is created.
3) Service entry sheet and Invoice has been posted for the Purchase Order.
Due Service master / Activity master description change requirement from client, description of the
Services are changed.
But it is not updated in Purchase order. (As purchase order has been created before service master description change)
and when i am trying to post next service entry sheet with reference to the long term purchase order created,
it is not adopting the new one service description.
Thanks in AdvanceHi Kiran
The solution to your issue could be achieved as follows:
In the item level 'Service' tab for the corresponding PO line item, change the quantity to which you have already made Service Entry sheet. Then create a new line item with the Service number, once you enter the Service number you would see the new description here. Then when you create a Service Entry sheet with reference to PO, the system would ask you to select one of the two entries you have in PO. Here select the new entry which you have made.
Thanks
Prashanth -
Hi,
I am having some problem in debugging one error
Detail:Cannot calculate. Essbase Error(1200329): Error compiling formula for [Asset Description] (line 37): invalid assignment
I am just creating a Add asset script as my client does not have license to CapEx module.
Script Below- please let me know what can be an issue
VAR numAsset = [NumAsset];
VAR usFulLife=[UsefulLife];
FIX(@CHILDREN("Total New"), [Scenario], [Version], [Entity], [Department], [AssetClass],[Year],"BegBalance","Local", "HSP_InputValue")
"Asset Description" (
IF (numAsset > 0 AND @MAXS(SKIPMISSING, @CHILDREN("Asset Properties")) == #MISSING )
numAsset = numAsset - 1;
"Asset Status" = 0; /* flag to know this is a new asset*/
"Asset ID" = [AssetID];
"Asset Description" = [AssetDesc];
"CAR No." = [AssetCAR];
"Purchase Units" = [AssetUnits];
"Purchase Amount(per unit)" = [AssetRate];
"In Service Date" = [InserviceDate];
/* "Total Cost" = "Purchase Units" *"Purchase Amount(per unit)";*/
IF(usFulLife > 0)
"Useful Life (in Years)" = usFulLife;
ELSE
"Useful Life (in Years)" = "No Scenario"->"No Version"->"No Entity"->"No Department"->"No LineItem"->"Useful Life (in Years)";
ENDIF
ENDIF
ENDFIX
FIX([Scenario], [Version], [Entity], [Department], "Local", "HSP_InputValue")
CALC DIM ("TimePeriod");
@IANCESTORS("Line Item 1");
@ANCESTORS([AssetClass]);
ENDFIX
Note- "Asset Description" is a member of Text type and in this script [AssetDesc] is a global variable of StringAsNumber
Regards,
-KPThanks for responding but my issue resolved, it was a Space in the member name.
-KP -
Material description change not possible after MM12 &MM13
After unicode & patch upgrade , i am not able to change material description in BAsic DATA1 of material master .This changes are done by running MM12 & MM13 tCode. Can anubody help me why i am not able to change material description of material after running MM12 & MM13
Hi,
MM12 & MM13 are scheduled changes it will not change immediately , Pl.s scheduled the materials with proper chnages then check the changes after schedule date .
Could you explan me why you are using these codes for Description changes ? is there any specific requirement
Thanks
sekhar -
How to Control the Favorites T-code Description changed with the Logon La
Dear All,
I have a issue for this: user want to set Favorites Description changed with the Logon langue, For example: In EN Langue, The MM01 in Favorites is u2018Material createu2019, If user used the other Langue, he want the u2018Material createu2019 changed the logon langue.
If the t-code in SAP menu, the description can change with logon langue?
How to set?
Please help me!
Thanks
Sun
Edited by: sun on Dec 19, 2008 2:23 AMhi,
pls check this link
http://searchsap.techtarget.com/tip/0,289483,sid21_gci862499,00.html
use these FM
STREE_USER_FAVORITES_COPY
STREE_FAVORITES_MAINTAIN
thanks -
Material Master description change
Hi All,
I have a PO created for a material and the PO is released at all levels. Now i change the description of the material using MM02. Now if i check in the PO it is not showing the new description in the short text field.
I made changes to the Vendor name and i see the New name coming up in the PO when i open the PO
Question:
WIll the new description of the material gets displayed on the already existing PO for that material or this new description gets appended only for the Purchase orders which are created after the description change
Please let me know
regards
PavanHi,
PO created before Changes hence they are not comming in old documents.
We cna corelate with following example -
E.g.
u have original docuement (Matrial Master)
u have taken a Xerox copy of that ( Created PO )
now
u have changed the origional document (Material Master)
Changes will never reflect in Xerox Copy unless u get the new xerox or u need to change it manually
but yes u can one thing change it manually-
Remove the line item system will ask u about enter material number then add the same material number u will get the new desription
regards,
sujit -
Job description changes that include DPS
I am currently in a situation where I have been asked to rewrite my job description to incorporate everything I now do related to DPS. Are there any titles, job description changes or entirely new jobs that you've seen that incorporate DPS? Any new titles out there?
Please look into my profile at linked in https://in.linkedin.com/in/prashantpatel21 I m interested.
Regards,
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution. -
Adding asset description to maintenance workbench forecast result
Hello
After running the forecast in maintenance workbench(EAM) i would like to have asset description in the forecast result. is there any way to add it?Hi,
These are the properties and their values. I cannot find the Action Type property
WOResultsRG (*)
|--Column1
|--...
|--Column10 (*)
|-- ÀctionSwitcher (*)
|-- column Components
|---- columnheader
|------ sortableHeader10 (*)
Propeties "WOResultsRG"
ID = WOResultsRG
Region style = advancedtable
Controller class = oracle.apps.eam.workorder.webui.WOSearchResultsCO
Disable client side validation = False
View instance = WorkOrderResultsVO
Rendered = True
Record displayed = 10
Banding interval = 1
Banding type = noBanding
Admin personalization = True
User personalization = False
Personalization label = Work Order Results
Standalone = false
Properties "ActionSwitcher"
ID = ActionSwitcher
Region style = switcher
Extends = /oracle/apps/eam/workorder/webui/EAM_WO_RESULTS_ACTION
View Attribute = ActionCode
Rendered = True
Admin personalization = True
User personalization = False
Pesrsonalization level = EAM Work Order Actions
Scurity mode = standard
Properties "Colum10"
ID = column10
Rendered = True
Total value = False
No Wrap = False
Banding shade = none
Aligement = iconButtonFormat
Grid Displayed = true
Admin personalization = true
User personalization = false
Properties "sortableHeader10"
ID = sortableHeader10
Sort allowed = no
Initial sort sequence = none
Prompt = Work Order Completion
Rendered = True
No wrap = False
Required indicator = no
Admin personalization = true
User personalization = false -
Is there a standard report I can use to monitor specific asset master data fields? My customer updates the second description line in the asset master (ANLA-TXA50) for some business process they have. They would like to be able to have a report that compiles all the master data changes every month.
Alternatively, I remember that I can also use evaluation groups for user-defined fields but how do I report them?Hi Paul,
Thank you for the information. This is exactly what I needed.
Regards,
Roy -
Asset master change through LSMW
Hi,
I want change the location for 1250 Assets.i want to use LSMW.
Will you please explain first 4 steps of LSMW for this.
Thanks
RafiHi,
Please see below an example for XK01 transaction:
Obtained from : http://www.erpgreat.com/general/lsmw-steps-for-data-migration.htm
Let me know if you need details..
You can create lsmw for data migration as follows (using session method):
Example for xk01 (create vendor)
Initially there will be 20 steps but after processing 1 step it will reduced to 14 for session method.
1. TCode : LSMW.
2. Enter Project name, sub project name and object name.
Execute.
3. Maintain object attributes.
Execute
select Batch Input recording
goto->Recording overview
create
recording name.
enter transaction code.
start recording
do recording as per ur choice.
save + back.
enter recording name in lsmw screen.
save + back
Now there will be 14 steps.
2. MAINTAIN SOURCE STRUCTURES.
Here you have to enter the name of internal table.
display change
create
save + back
3. MAINTAIN SOURCE FIELDS.
display change
select structure
source_fields->copy fields.
a dialogue window will come .
select -> from data file
apply source fields
enter No. of fields
length of fields
attach file
save + back
4. MAINTAIN STRUCTURE RELATIONS
display change
save + back
5. MAINTAN FIELD MAPPING & CONVERSION RULE
display change
click on source field, select exact field from structue and enter
repeat these steps for all fields.
save+back
6. MAINTAIN FIXED VALUES, TRANSACTION, USER DEFINED
execute
save + back
7. SPECIFY FILES.
display change
click on legacy data
attah flat file
give description
select tabulatore
enter
save + back
8. ASSIGN FILE
execute
display change
save + back
9. IMPORT DATA.
execute
display change
save + back
10. DISPLAY IMPORTED DATA
enter ok, it willl show records only.
back
11. CONVERT DATA
execute
display change
save + back
12. DISPLAY CONVERTED DATA
execute
display change
save + back
13. CREATE BATCH INPUT SESSION
tick keep batch input folder
F8
back
14. RUN BATCH INPUT SESSION.
sm35 will come
Object name will be shown here
select object & process -
Hi Everybody!
I would like to enquire about how to edit a recording for a specific transaction.
I need to make a mass change for hundreds of fixed assets ( e.g. cost center / responsible cost center ) in SAP. In our old system version we had a t-code for this mass change called ZAMASS01. Point is, I cannot use it in the new SAP version so I have to upload this data via BDC manually,
I have tried to record the transaction ( AS02 ) in SHDB but after I saved the recording and tried to Edit it.
Apparently I do not have access for further actions. All I did was to export the .txt file but it's useless.
Can someone help me generate the BDC file?
Thank you in advance!In Oracle FA Descriptive flexfield information will be copied only if assets are being reclassified within the same major category. The descriptive flexfields should be set up with the same segments in both the old and the new category. Otherwise, descriptive flexfield information in the old category may be copied incorrectly into an incorrect segment in the new category. If a segment in the old category and a corresponding segment in the new category have different formats (for example, segment 1 in the old category is alphanumeric and segment 1 in the new category is in date format), the information will be copied, but you will need to correct the descriptive information in that segment.
Maybe you are looking for
-
hi all, I have an overflow error in alv total field. first i filled alv grid using et_table_for_first_display, again i changed itab data and use refresh_table_display to refresh data. the alv contains total fields in field catalog.... when i try to '
-
How do I add several discs as a single album to my iTunes library?
How do I add several discs as a single album to my iTunes library?
-
Java.sql: select decode...
Hi everybody, Suppose I have a database connection called conn. (The db is connected to mysql), (String binNumber) is the encrypted string, "pass" is the password: stmt = conn.createStatement(); String s = "select decode (" + binNumber + ",pass)"; rs
-
How to Configure Recurring post in OUtgoing payments
hi ,Plz help to configure recurring post for Post dated transactoin
-
MSS Forms Integration with T710
Hi All, We are implementing MSS Forms at our company and we are having an error when creating basic pay. When trying to save the employee with a salary (entry in T710) we get the error "no entry in T510". Is the hire form only referencing T510 for Pa