Asset didnt pick PC

what is the use of management data option in asset master data.what details does this option provide to us.
As we made a AUC setlled to asset using CJ8G a month ago,then it didnt pick profit center in the asset line item.However when i did it again now for same auc again sttled to asset the the asst a/c line item picked the profit center.please help why did this happen.No change in asset master data.But in menu one option of asset master data showed change by a user.What is this management data indicate.Pls help.

Generally PC comes from Cost center Master record assigned to Asset. You should probably check changes if any made to Cost center.
           Regarding Management data... Authorisation to Asset Master record is based on Asset views. Each User will be assigned to Asset view. When ever changes made to Asset, it gets updated in Management data in respective Asset view assigned to User. If you find some change here, then there should be some change to Asset, not sure if any expections exist.

Similar Messages

  • Payment run didnt pick the open items of Vendor(special G/L for downpmnt)

    Hi,
    Payment run didnt pick the open items of Vendor(special G/L for downpmnt). The line item is due on 2.11.2010.
    The payment run was done on 12.11.2010. Why this line was not picked?
    Edited by: Rudra Prasanna Mohapatra on Nov 14, 2010 11:11 AM

    Hi Rudra,
    In order for the special GL's to be selected for Payment run, you need to define them in your configuration.
    Go to FBZP, click on All company codes, and double click on your company code, and check whether special GL is entered in vendors>Sp. G/L transactions to be paid.
    Regards,
    SAPFICO

  • I found a wifi network called linksys and it let me connect to the network for a while but now it wont let me. it says that the ipad 2 is unable to connect and we have tried to connect to the home network and it didnt pick up the signal.

    but my laptop will. so my grandson restarted the home network and the ipad 2 still wont pick it up. but my laptop will pick the home network.

    Start here.
    http://www.apple.com/support/ipad/assistant/wifi/
    http://support.apple.com/kb/TS1398

  • New nano uploaded or has songs I didnt pick! How do i get rid of them???

    Just plugged in the Nano I got my husband for Christmas, and there's a library of HIDEOUS songs that we didn't buy, upload or otherwise ask for.
    I THOUGHT I got rid of them when I deleted the library in Itunes, but its still on the Nano and I want them to GO AWAY!
    I tried reading the online manual but I am still lost. Any ideas on how to get these things gone???
    And even better how to not get unwanted songs on there in the future?
    Bridget

    There are several methods of deleting songs from the iPod and/or iTunes, and the method you choose depends on the settings you have selected for your iPod.
    If you have the iPod set to automatically transfer songs, and you no longer want a copy of those songs on either the iPod or in iTunes, simply delete the songs in iTunes. Highlight the songs you no longer want then right click and select "clear", or from the edit menu select "clear". Next time you connect the iPod, the songs will be deleted from there also.
    Only do this if you no longer want the songs on both the iPod and your computer.
    You can also use the "only update checked songs" method in the iPod options (right click on the iPod in the source list in iTunes and select options, then select "only update checked songs"). With this preference checked, you can remove the check mark from the songs in iTunes that you no longer want on the iPod. The next time you connect the iPod, those unchecked songs will be removed from the iPod whilst still being retained in iTunes. You can check and uncheck songs as you change your mind about what songs you want to put on the iPod.
    If you have the iPod set to manually manage your songs, and you want to delete the song from the iPod only, then select the iPod in the source list of iTunes. Highlight the song(s) you no longer want on the iPod, right click and select "clear", or use the edit menu as previously mentioned.
    This method only deletes the songs from the iPod, so if you no longer want the song in iTunes also, you'll need to delete it from there separately using the method above.
    If you are using iTunes version 7 or later, these settings can be found in the summary screen.
    If you want to delete everything from the iPod and completely erase the hard drive and start from scratch, then you can restore the iPod to factory settings.
    Only do this if you have the songs in your iTunes library, or a back up somewhere other than the iPod itself.

  • MB1B is not picking up a subcontracted component

    Hey Gurus,
    We are using subcontracting and we have a material that has a BOM structure with one component that is purchase complete. the top level material is set up for subcontracting. When we go to move the inventory over to the vendor by using MB1B and movement type 541, it is giving us a error that says: "Purchase order 4600006535 has no items." If you go into the purchase order, you can click on the components and you will see the lower level component in the purchase order.
    The place we are having an issue is when we use the PO through MB1B to move this one component. If you manually try to move the component 60001391 using MB1B with a 541 without the PO, it seems to work just fine.
    I also checked out the PO. What I did was add components to the line item on the PO to see if it was an issue with the set up of the PO. When I added other components other than 60001391( that was failing), the system picked those materials up when I tried to use MB1B. But, it didnt' pick up the component 6001391. I am not sure why it would pick up the other components and not this one component do you have any suggestions?

    Hi Nina,
    Have you checked the BOM setting?
    You mentioned that manually added components were fine, but the one component that comes from the BOM is not.  So maybe something in the BOM that prohibits it from being issued.
    Are you creating a subcontract PO directly or is it from a PP or PM order?
    Phyllis.

  • MB1B is not picking up a component

    Hey Gurus,
    We are using subcontracting and we have a material that has a BOM structure with one component that is purchase complete. the top level material is set up for subcontracting. When we go to move the inventory over to the vendor by using MB1B and movement type 541, it is giving us a error that says: "Purchase order 4600006535 has no items." If you go into the purchase order, you can click on the components and you will see the lower level component in the purchase order.
    The place we are having an issue is when we use the PO through MB1B to move this one component. If you manually try to move the component 60001391 using MB1B with a 541 without the PO, it seems to work just fine.
    I also checked out the PO. What I did was add components to the line item on the PO to see if it was an issue with the set up of the PO. When I added other components other than 60001391( that was failing), the system picked those materials up when I tried to use MB1B. But, it didnt' pick up the component 6001391. I am not sure why it would pick up the other components and not this one component do you have any suggestions?

    Never got a sufficient answer to solve the issue

  • Depreciation run: Assets posted, FI not posted

    Dear All,
      User created an AUC with reference to an existing asset, thereby deriving depn key of that asset.
    Depr run gave error for acc. depn account determination for that AUC.
    Values of that AUC trf to other AUC with depn key 0000.
    Depn deactivated and thereafter original AUC deleted.
    First depn run has posted values in AA module without any reference document.
    We have analysed and found that Table ANLP has data of this original AUC.
    How can one by-pass this data which is being picked in the depn run?

    Dear Dattatray,
    Basically AUC should not be charged with depreciation. For that matter you should not even maintain depreciation accounts against AUC asset class.
    Also, asset gets picked up in depreciation run as it is getting capured thru any of the tables viz. ANLB, ANLC< ANLZ, ANLP, ANLQ etc.
    Still as I understand you should not charge depreciation to AUC.
    Regards,
    Ajay Gupte

  • Custom Pick Slip Report

    Hello All,
    I am developing a custom BI report for seeded Pick Slip report.
    Report is working fine when submitted manually.
    But when the report is submitted from pick release window, the PDF output is not generated.
    I noted the following,
    All the programs completed normally. No errors or warnings.
    Custom report says no output file generated while clicking the view output button.
    Layout is empty, report didnt pick the template file.
    Any ideas. Is this the normal functionality of Pick Slip report. Whn the report will produce ourput file. Any profile options or setups.
    Thanks,
    Kannan B

    PickSlips are run using document sets when launched thru Pick Release : (OM(R)> Setup> Shipping> Documents> Document Sets)
    In EBS 11i, document set are not integrated with XMLP without the following patch:
    Metalink note:
    NEW FUNCTIONALITY: Ability to Execute Document Sets in XML Output Format - Patch 5688014
    Doc ID: 413108.1
    regards,
    Rownald

  • Ipod touch wont pick up movement

    I had to buy a new screen and when I replaced it, It still didnt pick up movement. What do you think is wrong with it because i have no clue.

    What do you mean? That the screen does not rotate?
    Is the screen lock on?
    If the screen lock is off and if you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.

  • Office 2010 shows as beta in Assett Management

    I have installed the full version and correct version of office 2010 professional plus (14.0.4762.1000) but asset mgmt picks it up as beta?
    If I click the discovered product it lists 19 different versions of the product with all the language versions and the (beta) one at the top?
    Also it lists each product seperately like, word, excel, powerpoint etc rather than adding them to a software collection under office 2010?
    I know I can create a software collection but I shouldn't need to and when i try and create one called the full product version it says it already exists, so why isnt it using it?
    Im running zcm 10.3.2 and not sure wether its the way office has been installed or an issue with how asset mgmt is picking it up, does anyone have any ideas?

    pittga,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Multi-rendition folios and 108ppi resolution

    Experimentation with multi-rendition PDF folios is throwing out some interesting things. I am in a sharing mood.
    - A standard iPad 2 folio rendition resamples images to 72ppi. An iPad 3 folio rendition resamples image to 144ppi. A multi-rendition folio resamples images to 108ppi. As a result, images in a multi-rendition folio look worse on an iPad 3 than those in an iPad 3-specific folio. Sure, if the original images are not very good, readers won't notice any difference, but for top-quality photography, the jaggies and jpegging noise are noticeably harsher.
    - All raster MSOs in a multi-rendition folio will be resampled to 108ppi. If those MSOs contain text, that text will appear fuzzy/jaggy on an iPad 3 even without zooming in. MSOs must therefore be set to Vector format to preserve the text... but remember that any text incorporated into a raster graphic will still be resampled to 108ppi, then fuzzed up onthe fly to 144ppi on the iPad 3 screen. So if someone is supplying you with logotypes, for example, insist on vector illustration files.
    Clearly, the 108ppi resolution of multi-rendition PDF folios is a compromise. I'd be a little happier with this resolution compromise if it was possible to adjust JPEG compression settings for the images.
    Ali

    Hi Bob
    I've just created a large report and did what you suggested, duplicate the image, and turn it into an mso and then added the HD folder. Nothing looked different, so I tested on of the images in the HD folder by adding the word HD, tested on iPad 3 and it didnt pick it up. I've made sure the file names are exactly the same. The files are tiff's.
    Have I missed something? all my SD assets are in a Links folder, with all the other assets, and then I created the folder "HD" with the hi-res images in there, and thats it. The 1024x768 folio is linked to all the normal images, but retina version is not picking up the images from HD folder
    Anything obvious missing? oh and I'm on release 23
    Cheers
    Alistair

  • How do i use the griffin Imic with a headset?

    I recently got the iMic for my macbook pro running lion. when i plugged it in the microphone was muffled and headphones didnt pick up sound. what is wrong?
    I have already set it up in the system preferences to use the usb iMic
    I am using the yapster tm-yb100a http://www.amazon.com/Universal-Stereo-Gaming-Headset-TM-YB100A/dp/B001FY7LBQ

    Hi.
    I've used the iMic myself, and I don't believe it is capable of doing what you are attmepting.
    The iMic is designed to provide a USB input for an external microphone, and  USB output for external speakers for your Mac. It has a mic input port, and a speakers out port.
    Neither port is specified for use with a gaming headset (mic with headset on a single plug).
    You will need to look elsewhere for a USB gaming headset.
    I hope this is helpful.

  • HT1695 How can i connect to a wifi with my Iphone 4s when it searches for wifi but never finds any signals anywhere available?

    My Iphone 4s can not scan for wifi signals. My phone was jailbroken and it was working fine until one day, my phone began to have problems searching for wifi signals. It connected and took longer to do so, however the next day it didnt pick up any wifi what so ever. I tap settings>wifi>on> and its an endless search in places where there is wifi.I saddly lost my hard drive where i kept a back up for my iphone, so restoring it from a back up wont do. I plugged it in on another
    computer which i had to set restore as a new phone. I did and i still hasn't worked, i am open to suggestions and the following i am aware of:
    It hasnt been dropped
    condensation/humidity (which i dont want it to be because it has been raining a lot and its never been wet)
    Thank you in advance!

    - Reset the iPod. Nothing is lost
    Reset iPod: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Setting>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connection
    What encryption our you using? Try changing the encryption, icluding using no encryption for test perposes.

  • How can i sync my iPod 5S to iTunes?

    I recently got a new iPod 5S and had to update iTunes to version 11.0, but when i tried to sync the ipod to iTunes, it didnt pick it up on devises. How can i get my ipod synced to itunes? also, when i tried to sign into my itunes account on it, it would just go back to the homescreen without it logging me in.

    http://support.apple.com/kb/TS1538

  • Why does calendar app icon show current date, but weather app icon does not?

    i.e. At time of writing this post, the calendar app icon shows "Sunday 16" but the weather one always always always shows "23 degrees"
    Is there a way of fixing this inconsistency in the UI?

    I now realise that this has been asked previously, only the 'previously asked?' search didnt' pick it up for me.
    Yes I understand the issues about how 'live' it needs to be, but surely you should have the option of picking this? Most people are connected 'all the time' anyway, so so what if there is a tiny bit of weather data flying about?

Maybe you are looking for