Asset Download in Market has to wait until CC Complete Sync

Hello,
If I´m uploading a big PSD file to CC Files and try to download a Market Asset I have to wait until the big file upload to download a 2~3kb files. There´s another way? I sometimes pause the Sync and start again and that works but not always. You should fix that. Perhaps a parallel download pipe or something for Market assets.
Thanks in advance.

Similar Messages

File Adapter -- Picking has to wait untill it get fully loaded/write.

Hi All,
I need to pick the files from a folder and I need to pick the files only which has been written completely.
I should not pick the file in the middle while writing, I need to wait untill it finishes the writing completely.
Is there any setting I can put in Sender File adapter to do this?
Thanks
Seema

Nithya,
>> Try to increase the processing time in the sender communication channel, so that it allows you to completely load the file. Check the time which is needed to upload the file to the directory manually and correspondingly change the processing time.
We do not know exactly at what time the file will be placed in the folder. It may be at any time. So I cannot put the processing time accurately.
Aamir,
>> If you are picking from FTP,MSecs wont work there.the sender program which writes the file must write the file in some temporary format like .dat etc and once the file is complete it should change the filename to .txt,configure the sender file adapter to pick only *.txt files.
This is a good idea. But I don't think I can ask them to change at the other end as it is working previously with other middleware.
Guys,
Can you please advice which is the best thing we can do at this point of time.?
Thanks
Seema.

One thread has to wait until another is terminated?!

Hello, I need a little bit help! I have a client-server programm, the server is listening and the client can make connections via socket, the whole thing is multithreaded. What I actually wanna have is that the second client can connect to the server, but that the thread that is started waits till the first is terminated and than resumes!
How can I do this and at which part of my code (presumably when the new thread is created??!!).
excerpt from server code:
class SocketThrdServer {
ServerSocket server = null;
public void listenSocket(){
try{
server = new ServerSocket(4444);
} catch (IOException e) {
System.out.println("Could not listen on port 4444");
System.exit(-1);
while(true){
ClientWorker w;
try{
w = new ClientWorker(server.accept()); //
Thread t = new Thread(w);
t.start();
} catch (IOException e) {
System.out.println("Accept failed: 4444");
System.exit(-1);
Excerpt from Client code:
public void listenSocket(String hostname, String cs, String cr){
     //Create socket connection
     String host=hostname;
try {
socket = new Socket(host, 4444);
out = new PrintWriter(socket.getOutputStream(), true);
in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
sendToServer(cs, cr);
socket.close();
} catch (UnknownHostException e) {
System.out.println("Unknown host:"+host);
System.exit(1);
} catch (IOException e) {
System.out.println("No I/O");
System.exit(1);

import java.util.Random;
public class JoinTest extends Thread
     static Random r = new Random();
     String name;
     public JoinTest(String name){this.name=name;}
     public void run()
          try
               long start = System.currentTimeMillis();
               while(System.currentTimeMillis()-start < 5000)
                    System.out.print(name);
                    sleep(r.nextInt(500)+150);
          catch(Exception e){}
          System.out.println();
     public static void main(String [] arg) throws Exception
          JoinTest a = new JoinTest("a"), b = new JoinTest("b");
          JoinTest c = new JoinTest("c"), d = new JoinTest("d");
          // A followed by B
               a.start();
               a.join();
               b.start();
               b.join();
          // C run with D
               c.start();
               d.start();
               c.join();
               d.join();
}

My lightroom mobile says it has 500 pictures but doesn't sync?

HHaving issues with lightroom mobile. The cloud says I have 574 picture but most of those are blank unless I click on it. Mobile says it is syncing 3/ 574 but just keeps spinning. I have tried it multi able times but nothing! What is wrong?

Could you try to re-sign-in to Lr Mobile and let me know if that helps.
If not please try this:
First remove the sync.lrdata file and restart LrD. This would restart/refresh the sync (metadata only).
Removing the Sync.lrdata might fix whatever the issue is. Or, at least, might trigger it to occur again. So remove the Sync.lrdata, start Lr, and then wait until it either syncs or gets stuck again and create at this point a Lr Desktop diagnostic log which can hopefully provide some clues.
You can find the sync.lrdata file here:
On Mac it's at /Users/<user>/Library/Caches/Adobe/Lightroom/Sync Data/Sync.lrdata
On Win it would be at C:\Users\<user>\AppData\Local\Adobe\Lightroom\Caches\Sync Data\Sync.lrdata
Please send me the LR Desktop diagnostig log - best as a private message with a downloadable dropbox link.
You can trigger the log via LR Desktop preferences -> Lightroom Mobile and when you hold down the alt key you will notice a generate diagnostic log button
In addtition send me a Lr Mobile app log as well. This can be triggered when you open up the settings and long press the to LR Icon a diagnostic log will be generated and attached to your local mail client.
Guido

HT203167 I've tried to send a gift, yet sent to a email that does not have iTunes account , now it tell her that she has to wait 71days before she can try and download her gift ? iTunes say I could redeem it , yet it says it's been redeemed . How can I re

Good morning , I've tried to redeem my gift ? Yet told this has already been done.
All I want is to be able to send her the gift to her other email which she has iTunes account I've never had so much trouble trying to gift something . iTunes does not allow me to resend .
She hasn't lost it in spam it's iTunes account she has different email . And it says she has to wait for 71days before she can try to download ?? Can you cancel this gift for me and refund please.
Would like to know how to refund in iTunes , as been unable to. And what other service is out their that I could send gifts with.

JTMD wrote:
I gifted an album ... But still she haven't receive any redeem code or email from itunes until now. Tried to resend it many times already but still no luck, no email.
Can only offer you this... as you have tried to Re-Send. Perhaps try a Re-send once more.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

When I attempt to update to a new version of i-Tunes I am prompted That another version is currently being downloaded and to wait until this is comleted before downloading any new version.

When I attempt to download an up to date version of i-Tunes on my Windows Vista laptop I am prompted to wait until an earlier version has finished installing before installing a new version. I attemted to uninstall ALL traces of iTunes so that I could start with a 'clean sheet', however I was again informed that I had wait until the previous installation was completed. Can anyone help. ?

Hi there,
You may find the troubleshooting steps in the article below helpful.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

I am currently volunteering in Uganda, so data is precious. I can no longer afford unlimited data, I pay by MB/GB. All of a sudden Mail has stopped receiving. I wait until about 60meg, but no new mail. Using Gmail. Doctor says connected fine.

I am currently volunteering in Uganda, so data is precious. I can no longer afford unlimited data, I pay by MB/GB. All of a sudden Mail has stopped receiving. I wait until about 60meg, but no new mail. Using Gmail. Connectivity Doctor says connected fine. No probs there. And weirdly, when I want to send an email. I write it, it takes absolutely ages to try to send but as soon as I click disconnect it sends the email. Very odd. I would just love to be able to write all my emails offline and save to drafts/Outbox and then just connect to send and check emails then disconnect again.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

How can I wait until a Swing.Timer has finished?

I have a Swing.Timer runing which displays some animated text (more precisely it fades out a text with a delay of 50 until all characters are erased.
Afterwards a time consuming operation shall begin. How can I achieve that this operation waits to start until the text has been faded out? The time to fade out the text depends on the length of the text, of course.
So, how can I make the operation waiting until the Timer has finished its work?
Thanks,
Dirk

dirku wrote:
I have a Swing.Timer runing which displays some animated text (more precisely it fades out a text with a delay of 50 until all characters are erased.
Afterwards a time consuming operation shall begin. How can I achieve that this operation waits to start until the text has been faded out? The time to fade out the text depends on the length of the text, of course.
So, how can I make the operation waiting until the Timer has finished its work?I gave you an answer to this with sample code yesterday:
[http://forum.java.sun.com/thread.jspa?threadID=5294087&messageID=10244564#10244564|http://forum.java.sun.com/thread.jspa?threadID=5294087&messageID=10244564#10244564]
        public void actionPerformed(ActionEvent e)
            if (sb.length() > 0)
                sb.deleteCharAt(0);
                label.setText(sb.toString());
            else
                label.setForeground(color);
                label.setText(text);
                Timer timer = (Timer)e.getSource();
                timer.stop();
                // ***** start process here ***
        }The timer here continues until a condition is satisfied (here it's where the Stringbuffer that holds the text that is sent to the JLabel is empty). So all you have to do is place any code that needs to happen when the Timer ends in the else block. It's so simple as to be trivial.

I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

something other is dowloading somewhere on ipad

How to make a slide wait until user has answered a question correctly, even after activating a smartshape?

Background:
I have created a quiz in which the user must answer each question correctly before proceeding to the next slide. This is what I did:
Set preferences to Settings > Required > Answer All - The user must answer every question to continue
Set the number of attempts on the question level to Infinite
Made the Next button invisible and disabled the playbar
This way, the user can only proceed to the next question slide with the Submit process – and, since attempts are infinite, that means only after successfully answering the question.
Current goal:
I want the user to be able to click on a prompt for a hint. To set this up, I did the following:
Created a smartshape labeled “click_for_hint” displaying text that says, “Click here for a hint”
Created a smartshape labeled “hint” displaying text hint
Set “click_for_hint” to show “hint” on success
Now, when the user clicks on the text that says, “Click here for a hint,” the hint pops up. So, that works – awesome! However, once the hint is activated, I would like for the user to be able to continue infinite attempts until successfully answering the question… and only then, after answering correctly, proceed to the next slide.
The problem:
If the user has submitted one or more incorrect answers and then activates the hint, the slide no longer waits until the user has answered the question correctly. Instead, it automatically resumes playing, proceeding to the next slide. I tried setting the smartshape “hint” to pause on success, but that did not work.
Is there a way to make the slide wait until the question is answered correctly before proceeding to the next slide, even after the hint has been activated?

Are you aware of the fact that your Required setting can cause problems, blocking the user? It is also totally unnecessary, because you have infinite attempts on question level, and did hide the Next button (hope you don't need Review, otherwise I would recommend not to hide that button but to drag it under the Clear button: Question Question Slides in Captivate - Captivate blog)
The hint problem is linked with the fact that a simple action will release the playhead. I would like to see the timeline of the slide, to compare the pausing points of the shape button and the question slide. And maybe this blog post can also clarify difference between simple/advanced: Why choose Standard over Simple action? - Captivate blog
As for shape buttons on question slides: Buttons on Question/Score Slides in Captivate 6? - Captivate blog

Sand Box has stopped working error when using System Exec.vi with wait until completion is true

I get the following error message in Windows 7 "Sand Box has stopped working" when using System Exec.vi with wait until completion set to true, if I set it to false there is no error message.

Hello JJVerdi
mmm well System Exec.vi simulates a DOS command window, can you run the sandbox from the cmd window using the same commands without any errors?
you may take a look to this KB, it may be related to your issue:
http://digital.ni.com/public.nsf/websearch/2393462BD57B854186256C4F007B706A?OpenDocument
Regards
Mart G

Trying to download Lion and the store has me waiting and nothing will download

Trying to download Lion and the store has me waiting and nothing downloads for two days.

With it hung up like, you might want to cancel and start over...you don't get charged again.

"Please wait until your phone has been activated"

I got a refurbished phone from Asurion and it took a while to activate originally. I was able to connect to wifi, add a google account, start updating some apps. I restarted the phone and now its stuck on "Please wait until your phone has been activated" I used the sim card that was included with the phone from the larger red card. Is there any way to reset it or activate it now?

Snn5 speaks the truth, your sim will need to be activated. If you are the kind of person who prefers to do things on your own, though, there is one more option. If you've already created a myVerizon account, sign in to that, and there will be a box around the top middle that will ask you what it is that you want to do. In this box, type "activate or switch device" and it will lead you through the process.

I have to wait until a movie is fully downloaded until I watch it.

I have to wait until a rented movie is fully downloaded until I watch it. Yet my neighbour (bought ATV a year ago) can download and watch a rental after 5 minutes. Is this a setting that I must change?

Welcome to the Apple Community.
You don't need to wait until it's fully downloaded (unless you rented it from your computer). The Apple TV calculates when enough of the media is downloaded to play it without having to stop to wait for more to download, different internet speeds mean that the time getting to this point is different for everyone.
You probably have a slower internet connection than your neighbour.
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Launchin an application and waiting until it has quit

Hi,
I'm trying to use automator to swap different users settings before launching an application. This much is straight forward. What I would like to do is to save the settings when the application is closed.
But I can't work out how to launch the application and then have the workflow wait until it closes again before backing up the user settings. Is this possible just using automator or do I need to start using apple scripts?
Thanks
Nic

Well, yes, you could have a workflow wait until an application closes. The workflow would loop forever checking to see if the app is running, and if isn't then backup the settings and stop looping. Hmm, you'd want to use some AppleScript for that. I used "TextEdit" as the application to test this, so you'd want to change that to the name of the app you are checking. It pauses for 5 seconds, but feel free to adjust that to whatever.
repeat
if application "TextEdit" is not running then exit repeat
delay 5
end repeat
Add the action "Run AppleScript" (Utilities category, or Automator app) as the first action before your actions that backup the settings. Just delete everything in the "Run AppleScript" action and then add the above script. The default script in "Run AppleScript" is for passing stuff from a previous action to the next action, but since this is the first action you don't need the default script. (It shouldn't hurt to leave it, either, but you don't need it.)
When the workflow is run, it'll stay stuck in the first action waiting for TextEdit (or your app) to quit. When it finally does, the workflow will move to the next actions you've provided for backing up the settings.
Hmm. Thinking a bit...
One alternative to this would be to create a workflow to quit the application, and then have it backup the settings. You would have to use the workflow instead of quitting the app normally, that is you couldn't quit from the menu nor use Cmd-Q. There's an action called "Quit Application" in Utilities category (or Finder action). Use that as your first action, then possibly the "Pause" action (Utilities category, Automator app) set to 5 or 10 seconds to make sure the app has quit, and then
your actions to make the backup for the settings.
A couple of ideas there.

Asset Download in Market has to wait until CC Complete Sync

Similar Messages

Maybe you are looking for