Asset history report (AR02)

Hi
I have posted a query in ERP Financials Asset Accounting but i didnt got any response from there.
Thats why i am posted the same query in ABAP general. Please my query in the below link.
Asset history report (AR02)

No response.

Similar Messages

  • Asset History Report - Useful Life of the Asset

    HI Freinds,
    The users desire to have the useful life included in the Asset History Report generated using the T Code AR02. How can we have the useful life displayed in the Report?
    Thanks for the assistance.
    Regards

    See the wiki how to ad new fields
    https://wiki.sdn.sap.com/wiki/display/ERPFI/SAPListViewer+Basics
    https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • S_ALR_87011990 asset history  report  error

    Dear All
    We need to process S_ALR_87011990 asset history  report for year 2008 that  giving an error. System recommends to proceed AJRW but it is giving error. But we did not do any Year end closed processes for Asset & FI.
    We checked using OAAQ - it says 2006 last closed and tcode: OB52 says 2008 for Assets.
    Appreciate your help on this.
    Thanks
    Madhawa
    Edited by: Madhawa Jayalath on Jan 20, 2009 7:18 AM

    Hello Madhawa,
    ob52 controlls only the periods in the GL. It is possible to close the assets in ob52 but the AM-module is still open for this.
    OAAQ displays the last closed fiscal year in AM, start AJAB for 2007 then go on with AJRW for 2009.
    Best regards
       Horst

  • Asset history report for bunch of assets

    Hi,
    I have created an asset through the following steps
    Internal Order KO01
    Budgeting T Code KO22
    Release of Internal Order  KO02
    Creation of AUC  AS01
    Creation of PO  ME21N
    Now when I see the report AW01N for this asset, everything is available on the asset history sheet.  Likewise I need such a report where I can pull out for bunch of assets with the above history informtion like IO No, PO No etc against those assets.
    I have some 500 assets for which IO no and PO no I need against each asset.
    Please tell me the standard asset report for this.
    Regards,
    babjee

    Hi babjee,
    I think you have to use for this an internal order report (line item report?. On the internal orders all information is avaiable. I think this is the reason that you use internal orders!
    On the internal order you collect all the posting and the AUC is a cost collector for short term and when you settle it to the Final asset this is the endpoint.
    I don't have seen that the information  from KO22, KO02, ME21N are direct available in AW01N
    Paul

  • Reg Asset History Report in SAP BI

    Hi,
    I need to create the riplica of AR01 which is abap report in SAP BI.
    Do we have any standard Asset reports in SAP BI.
    -bjob

    Yes, there is business content for Fixed Assets. Please review the Fixed Assets section in the business content in RSA1.
    Here is a useful thread.
    Fixed assets from FI to BW
    It is important to note that SAP is theoretically planning on updating some of the business content, but they have not discussed which will be updated first. I suspect that Fixed Asset reporting will be low in the list of priorities. Most BW reporting is done for large numbers of users. Fixed Asset reporting is typically done by a small group of accountants, and many companies do not implement it.
    FWIW, it's never a good business practice to implement a BW reporting tool for only one or two users when there is a fully functional report in SAP that fits all of their needs. It's a waste of resources that can better serve a larger population of end users and present a better value to the business.

  • Assets transaction history Report

    Hi,
    I Need to Change in the Assets Transcation History Report ,
    I store Two Extra Field Information in Reclassfication,Transfer, Mass Changes
    i need That Information in Assets Transcation History Report but The Transcation
    id of Reclassfication,Transfer, Mass Changes in not Find from Assets Transcation
    Report or Form ,Can Any Body Help me to Find the Transaction id of Reclassfication,Transfer, Mass Changes in Assets History Report
    Thanks

    hi
    use T.code OARP  you can get the some reports, if it's not suitable then you can devalop your own reports through Report painter or Query.
    satish

  • Asset acquisition value is not updating in Asset history sheet & AW01N

    Hi,
    The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
    it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
    I have also checked the below link but still i am persisting the same problem.
    Asset acquisition value not updating
    Regards
    Amit

    Hi Amit,
    check note  366848.
    Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.                                                                               
    At first run the report RACORR110_B. Check the  field ANLC-ANSWL bevor and after running the report.                   
    The report RACORR110_B accumulates the values of the asset line items  and writes the result in the field ANLC-ANSWL.                                                                               
    After this, please start the report RACORR55. This report forwards the  values in the following year.
    (If this is not the reason (ANLC is correct), the report makes nothing.) 
    Regards Bernhard

  • S_ALR_87011990 - Asset History Sheet - Additional Fields

    Hi,
    in the Asset History report S_ALR_87011990 - Asset History Sheet, my client is asking to add some more fields, those fields are i check its from master data only. in this specified report we got the following fields as we required.
    Asset
    Sno.
    CoCd
    Asset Class
    Asset description
    Cap.date
    APC FY start
    Dep. FY start
    Bk.val.FY strt
    Acquisition
    Dep. for year
    Retirement
    Dep.retir.
    Transfer
    Dep.transfer
    Post-capital.
    Dep.post-cap.
    Invest.support
    Write-ups
    Current APC
    Accumul. dep.
    Curr.bk.val.
    in addition to that my client is asking in this report some of the master data filed as following
    Quantity
    Eval Grp 1
    Eval Grp 5
    Plnt
    Location
    Room
    deprec. Key
    deprec.Rate
    Cost Ctr
    i checked in OAVI , i can able to add 5 fileds only that also we are already using 0001 as sort variant.
    and i checked in Define asset history sheet version, here we can add the transaction data only not a master data ,
    so is it possible to add those fields in the same report itself ? kindly let me know if its possible .
    Thanks & Regards
    ILAVARASAN TD

    Also, one humble suggestion from my side
    When you raise a question in SCN and it is answered, please close the thread.. If you check your account, none of your Qs are closed (http://scn.sap.com/people/ilavarasan.td/content)
    When you close your questions, it acts as a reference point for others to refer in future, with confidence that the issue was resolved earlier
    You can close a thread in 2 ways
    1. Mark any of the answer as CORRECT ANSWER, if that has resolved your issue
    2. Mark "Assumed answered" incase there is no solution to your issue or you resolved it yourself... In this case, you can also share the solution
    Br. Ajay M

  • Asset history

    Hi all,
    I have to create a asset history report. I get error saying Fiscal year is not maintained for the company code.
    To solve this i need to proceed with transaction code AJRW to maintain fiscal year.
    I am currently working in the production system and the complete data is to be archived. so i am not getting authorization for this transaction as the client is not comfortable in giving me the access for any changes to be made t the system.
    can any one tell me how deal with this problem and get this report with out using the transaction AJRW.
    thanks in advance,

    Hi Anand,
    as far as i know,
    you have to execute the AJRW to solve the problem.
    otherwise you can not generate the report (all asset report) even for the previous year.
    hope this can help.

  • Create ar02 Asset history sheet FI report in BI

    Hi Expert,
    I have to create report same like ar02 Asset History Sheet (R3 side) in BI.
    Please tell me which datasource and infocube we can use so dat we can get all the fields that are used in ar02.
    User want same records dat are used in selection screen and dat r coming in report.
    Please tell how can we do it.
    Ankit

    Hi,
    Please check the below link.
    Which extractor should I use for Fixed Asset Acquisition Value.
    Hope it helps.
    Thanks & Regards,
    Ramnaresh.P.

  • Additional field in report S_ALR_87011990 - Asset History Sheet

    Hi
    This is with reference to report S_ALR_87011990 - Asset History Sheet .
    I want to add quantity, location etc in this report.
    can anybody guide me how to add these additional field in this report as in configuration no such option available.
    Regards
    DD

    Hi,
    this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
    That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
    Regards,
    Markus

  • Depreciation Values are apprearing in ASSET HISTORY SHEET Report

    Hi
    We have retired 2 assets during Feb-12 month and values are updated correctly in appropriate Tables & Asset Explorer aswell, but when we are executing Asset History Sheet Via T_Code S_ALR_87011990, depreciation values is not showing in depreciation for the period column (NAFAG) for one asset.
    please let us know what could be problem in extracting the values in the report
    Regards
    Sreenivasulu

    Hi,
    You can run the asset history sheet report with the indicator "Deprecation posted". This will show you the posted depreciation
    (NAFAG).
    Regards,
    Brigitte

  • Asset History Sheet giving Report date 31.03.2008 invalid for this report

    S_ALR_87011990 :Asset History Sheet.
    Report date 31.03.2008 is invalid for this report
    In the above report, if we give the Report Data, as any date other than the end month of the fiscal year, it gives the error " Report date 31.03.2008 is invalid for this report"  We require this report for tax purpose upto 31st Mar08
    What needs to be done ?
    Thanks
    amit

    Hi Amit,
    In AM you can only report on the dates you have set-up in period control. In the most cases this is the last day of the Month.  When you have 13 periods from 4 weeks you can't report on the calendar month end.
    Paul

  • Asset history sheet Report date wants to change as selectoption

    Hi All,
    I have Requirement in Asset history sheet transaction S_ALR_87011990. In this i need to change Report date as select option now this is parameter.The selection screen declaration has done in logical data base ADA.
    Can u please suggest me how can we do this.
    Regards
    Madhu

    Hi,
    Can you be more specific about your requirement ? Because as per your Q there are two scenarios.
    1) Standard Logical data base
    2) Custom i.e. the one you created.
    In case of standard logical data base, goto SLDB --> name of the LDB ---> Goto the source code tab and in the source code search for enhancements to modify the screen elements. This way you can get the select-options for the parameters (provided any enhancements exist)
    If its a custom LDB, GOTO SLDB--> name of the LDB --> Source code, check for the screen elements code, here
    declare a tables statment
    ex.
    TABLES : SPFLI
    SELECT-OPTIONS S_CARRID FOR SPFI-CARRID
    instead of
    PARAMETERS:
    P_CARRID TYPE SPFLI-CARRID.
    This way the parameters option can be changed to select-options
    Thanks
    Sharath

Maybe you are looking for