Asset History Report - Useful Life of the Asset

HI Freinds,
The users desire to have the useful life included in the Asset History Report generated using the T Code AR02. How can we have the useful life displayed in the Report?
Thanks for the assistance.
Regards

See the wiki how to ad new fields
https://wiki.sdn.sap.com/wiki/display/ERPFI/SAPListViewer+Basics
https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV

Similar Messages

  • Tcode for Useful life of the asset

    Hi Gurus,
    Is there any standard report or Tcode to know the "Useful life of the Assets" ?
    Madhu

    Hi
    Please check table ANLB
    Thanks & Regards
    Phaneendra

  • Problem in useful life of the asset?

    Hi,
    I don't know what and where it is going wrong so need your suggestion please:
    We have created one new asset class and trying to check dep. in testing server but system is calculated dep. with useful life as 10 years only for all the assets I have created.
    In OAYZ, I have just given the dep. key and the fields of useful life and period is blank for all the dep. areas. Also, tried with useful life 5 but result is same.
    In Asset Master, I have mentioned the useful life as 5 years for all the dep. area.
    The problem is system is system is showing the values based on useful life of 10 years, why I don't know what shall I do please suggest....
    I have checked it by creating some of other assets as well with different useful lives but the result is same.
    Please help!!!
    Thanks in advance....
    Regards
    Nitin

    Hi Nitin,
    If the depreciation is based on 10 years even if you have entered useful life 5 years then it means depreciation key is not configured as dep based on useful life.
    It seems depreciation is based on explicit percentage which must be 10% in your case.
    Check what dep key is assigned in Asset master and go to T code AFAMA, AFAMS for depreciation key settings.
    If you still have doubts of how to go about it then attach screenshots of AFAMA,AFAMS.
    Hope it solves.
    Regards,
    GSR

  • HOW TO CHANGE THE USEFUL LIFE FOR MORE ASSETS AT A TIME FOR ASSET CLASS

    Hi All,
    Asset which is under Asset Class Support system-B700. Here every thing is ok but the problem in USE FULL LIFE which is come by default. It must be 4 instead of  5.   So can any body help me out from this how to change the Useful life in that Asset class.  In that Asset Class we have the morethan 200 Assets. It was happend in Prdocution system so now the problem is where i can change the useful life for the asset class either in DEV or PRD.
           Also i want to know the information of How these assets are Uploaded into the system (Lsmw or etc). this is very urgent for me.
    Thanks in Advance,
    Regards,
    Siva.

    Hi Ashok,
         Can i know the reason how it was happend. i mean instead of 4 years the system showing is 5yesrs any reason is there behind that.
    Thanks in Advance.

  • Asset to get the assets in which useful life was chnged.

    Which Asset table will capture the changes made to the asset useful life in the asset master data.I mean i should be able to get assets in which the useful life was changed in any speciied period.

    Hi,
    change documents you can see as follows:
    Go tto asset master datta (AS03 or AW01N) - Environment - change document.
    regards Bernhard

  • Asset Report - for useful life of an asset

    Dear Friends,
    Is there any standard report which gives the following information --
    1.  Asset Number,
    2.  Asset Name
    3.  Account Determination,
    4.  Profit Center
    5.  Useful Life,
    6.  Depreciation in the current Year
    7.  Accumulated Depreciation
    8.  Acquisition Date
    I tried in Asset Balances Reports.  Most of the fields are coming except Useful Life.
    Can any one please suggest.
    Regards
    KVKR

    Hi
    There is no report with usefullife , either you can go with query or you can extract Asset standard report where you will find most of the details you mentioned and for usefullife please use table  ANLB and extract data from this table for useful life. You may copy  your asset nos extracted by the above standard Asset report and paste that in the asset field of table ANLB.
    Now you can insert the useful life in your main report.
    cheers
    Mukta

  • Error While Executing the Asset history report S_ALR_87011990

    Hi,
    I am getting the below error while executing the Asset History Report - S_ALR_87011990
    No data was selected
    Message no. AB064
    Kindly advice me

    Hi,
    Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

  • End of Useful life for an asset

    Hello,
    Does anyone know if there is any standard report which states when the asset's useful life is going to end? Even if there is no standard report, does anyone know if this information is stored in any tables from which it can be extracted. Basically, my user has a requirement to know when a certain chunk of his assets are going to fully depreciate. I know this information is available in the asset explorer (comparision tab) but there are some 500 assets and it would be helpful if there is some sort of list available.
    Thanks for your help
    Best Regards
    Keyur

    Thanks for your reply. My question is not to get a list of assets which are fully depreciating this year. I want to know the end of useful life for certain assets that I will select. What you told, would show the assets expiring this year.
    Let me know if I am missing something.
    Keyur

  • S_ALR_87011990 asset history  report  error

    Dear All
    We need to process S_ALR_87011990 asset history  report for year 2008 that  giving an error. System recommends to proceed AJRW but it is giving error. But we did not do any Year end closed processes for Asset & FI.
    We checked using OAAQ - it says 2006 last closed and tcode: OB52 says 2008 for Assets.
    Appreciate your help on this.
    Thanks
    Madhawa
    Edited by: Madhawa Jayalath on Jan 20, 2009 7:18 AM

    Hello Madhawa,
    ob52 controlls only the periods in the GL. It is possible to close the assets in ob52 but the AM-module is still open for this.
    OAAQ displays the last closed fiscal year in AM, start AJAB for 2007 then go on with AJRW for 2009.
    Best regards
       Horst

  • Depriciation key and useful life periods in asset master should in display mode only

    Hi all
    At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
    But
    When we click on Depreciation tab here the  Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
    Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
    User don’t have chance to modify this.

    Hi Anil,
    The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
    Regards
    Pankaj Pareek

  • Wrong depreciation calcualtion when we change useful life of an asset

    Hi,
    We change the useful life of an asset during the middle of the year.  The deprecaiton calculation is not effecting correctly for the remaining useful life of an asset.
    We are using stright line method of depreciaion. I will appreciate if any post some tips what is wrong .
    Example: 
    Current State: 
    Acquisition value: 300,000
    Acquisition date: 1/1/08
    Useful life: 3 years
    NBV 12/31/08: 200,000
    NBV 6/30/09: 150,000
    New life: 2 years, starting 7/1/2009
    Current methodology:
    NBV at 12/31/08 divided by new remaining life as of the beginning of the year (2009) $200,000 / 12 months = $16,667
    Depreciation expense in 7/31/09: $66,669 ([16,667 * 7 months = 116,669] minus depreciation at old method booked for first 6 months of 2009 [200,000/24 = 8,333 * 6 = $50,000]). $116,669 u2013 50,000 = $66,669
    Monthly Depreciation expense between 8/31/09-12/31/09: $16,667 / month
    Future State: 
    Requested methodology:
    NBV at 6/30/09 divided by remaining life as of the date of the change: (150,000/6mos) $25,000
    Can any one explain what is the issue

    Hi,
    By default, any change in depreciation parameters will recalculate depreciation from the beginning.  If you want to change depreciation terms on different phases, you may need to introduce a depreciation key which changes percentage in multi-level method.
    Best Regards,
    Madhu

  • Changing useful life of an asset

    Hi All,
    Client wants to change the asset's useful life from 4 years to 3 years. Also previous depreciations should not get affected due to this. The new recalculated value of the asset should be spread over the remaining useful life and depreciation amount should also be recalculated accordingly. Do we have such functionality in SAP version ECC4.6?? or we need to post the depreciation manually going forward?? I have tried smoothing method but this is also not helping me out.
    Please advice if we can do something in it.
    Many Thanks,
    Parul

    Hello Parul
    Sorry but this functionality is only available as of release 6.0 if you have the
    new depreciation engine activated. Note 965032 will provide you more details. In
    particular section 4. c) Managing time-dependent depreciation parameters:
    With the new depreciation calculation, you now have the option to 
    change depreciation terms during the fiscal year. This means that 
    the changed parameters are included in the calculation always     
    from the period for which the period is also valid.
      The following depreciation terms can be maintained   time-dependently on the   fixed asset:                 
      -  Depreciation Keys                                                                               
    -  Useful life                                       
      -  scrap value/scrap value percentage rate                                                      
      -  variable depreciation portion                     
    Regards
    Javier

  • Carryover of Expected Useful Life for an Asset

    When I create an asset in our system, in the first year carryover the system is not creating a count of 1 year and 2 months. Instead I receive 14 months in asset useful life. This example is based off an asset created on 11/1/10 with a carry forward to 2011. Anybody know why this is happening?

    Thanks for your reply. My question is not to get a list of assets which are fully depreciating this year. I want to know the end of useful life for certain assets that I will select. What you told, would show the assets expiring this year.
    Let me know if I am missing something.
    Keyur

  • Asset history report (AR02)

    Hi
    I have posted a query in ERP Financials Asset Accounting but i didnt got any response from there.
    Thats why i am posted the same query in ABAP general. Please my query in the below link.
    Asset history report (AR02)

    No response.

  • Associating a certain "useful life" for each "Asset Class" ?

    Hi All
    Could anyone tell me how to associate a certain "useful life" for each "Asset Class" ?
    Which's customizing navigation?
    Thanks
    Gandalf

    Hi Try this..
    If you go to IMG (Transaction SPRO) :-
    -> Financial Accounting
    -> Asset Accounting
    -> Master Data
    -> Screen Layout
    -> Define Screen Layout for Asset Depreciation Areas
    -> ScrnLayout XXXX
    -> Field group rules
    Here, you will find whether column 'Class' is activated -> it should be activated
    Hope it helps
    Zub

Maybe you are looking for