Asset inheritance from AUC

HI Experts
Can anybody tell me whither the asset can inherit data like description , manufacturer....   from the AUC asset that was distributed on it.
i also wanned to know , when and invoice is made on an assets the asset data is automatically updated by the vendor's name , is their any other action that may update the asset data (po , pr , receiving ......)
Thanx in advance

Your case may be one of the following:
           1.GL a/c is a B/S account and doc splitting active
                        Check:   DEFAULT Assignment FAGL3KEH
                  2.Asset transactions   -    Check : CO object specified in the asset master

Similar Messages

  • Writeup depreciation asset capitalised from AUC

    Hi
    There are couple of AUC's capitalised and depreciation carried out.
    But the AUC's wrongly capitalised.
    Now I need to writeup the depreciation and decapitalise the asset.
    The process I tried.
    I used t.code ABZU with transaction type "700" then I am getting the error "You cannot post write-ups", but When I am using other asset which is not created from AUC I am not facing this error and Accumulated dep is debited and Depreciation is credited
    Then I made setting and used t.code ABZU with transaction typr "400" then dep value is capitalised to main asset i.e. the entry generating was
    Asset Account              debited
    Decprecation account   credited
    With about Depreciation balance is fine when I look FS10N, But my Accumulated depreciation balance account still holding the balance, now how to reverse the Accumulated Dep account is netted of.
    Please let me know what is the configuration setting I need to carry so that system should generate
    Accumulated dep Account debited and
    Depreciation account is credited
    Regards
    Krishna

    Hi
    if the depreciaiton has been calculated just for open year, you should enter depreciation key 0000.
    Best Regards,
    Blaz.

  • Automate the current FA close-out from AUC to FA

    Hi Experts,
                    Guide me what is the process i should Lookin to Automate the Fixed Asset coseout from AUC to FA.  Any Information Regarding this is highly Appreciated.
    -JohnPeter

    Hi,
    please read the documentation on the Settlement of AuC+s.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71e7cd448011d189f00000e81ddfac/content.htm
    Best Regards,
    Blaz

  • Ko88 results in zero value - trying from AuC to Asset (full settlement)

    Hi everybody,
    I´m getting a zero value doing a settle by KO88 from AUC to a final asset.
    Previously i have made the settle for AUC from expense with no ploblem.
    The problem is that when i make the settle with KO88 (full settlement option) to pass the value from the AUC to the final asset, the AUC balance is zero and the final assets (2 of them) also show zero. So the money is lost.
    Please if anyone can help me, we will appreciate a lot.
    Best Regards!

    This is the error when i try to use the AIAB transaction:
    Line item settlement is not possible for asset IA01 38000816 0
    Message no. AW050
    Diagnosis
    You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
    However, line item settlement is not active in the asset class of asset 38000816 0 (company code IA01).
    If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
    Procedure
    Check the setting for 'status of AuC' in the definition of the asset class.

  • Transfer from AUC to Asset

    Hi
    I have small problem in settlement.
    1.We ran settlement using KO88 for single order and posted to AUC using "Automatic settlement".Then ran "Full setllement" and posted value from AUC to Asset successsfully.
    2.But we want to reverse the same.
    So went to KO88 again and selected "Full settlement" and reversed from Asset to AUC.The again selected "Automatic settlement" and reversed from AUC to Internal order successfully.
    Now we want to again run stellement and post to final asset with REGULAR PROCEDURE with KO88..But getting problem in step2 as mentioned below.
    Step1: ran KO88 with "Automatic settlement" and transfered value to AUC successfully.
    <b>Step2: ran KO88 with "Full settlemet".But getting the error "No transaction data posted since last settlement".</b>
    Now Internal order any way has no value(as per message) but AUC has the value.
    But under the same scenario original postings were successfull(i.e when ran "Full settlelemt"under KO88 even that time also value was not there in Internal order??)
    Tested couple of settlelements with some other orders.It works for original settlements BUT 2ND STEP WILL NOT WORK WHEN WE TRY TO REPOST AFTER REVERSALS.
    Can some please advise what is the reason for this?
    In precise I want to reverse some settlements from Asset-AUC-Internal order and repost to same asset or other asset.
    regards

    Hi
    Sorry, this problem got resolved.Only mistake I was doing  was checking the box "check transaction data" -
    hence the error.
    When I removed that it worked fine.

  • Transfer partial asset values from completed asset to AUC/other asset

    Hi All
    Is it possible to transfer partial asset values from completed asset to AUC/other asset.
    if yes please let me know how to do that?

    I already checked T code ABUMN
    But by using this code whole asset value is transferred ; I want to transfer only partial value.
    eg. If i postasset value of Rs. 1000 to a machine & capitalise it. But after posting i found that actual asset value is only Rs. 600 and balance is of another asset.
    then how can i transfer balance asset value of Rs. 400 to another asset card.

  • Track P.O.no.against Asset created via AUC settlement

    Hi Friends,
    We have a scenario wherein an AUC is populated in a P.O.as account assignment object. Goods Receipt entries are made for these P.O.s and the AUC gets values therefrom. This AUC is then settled to a Final Asset.
    We would like to know whether there is any way to track the P.O.no.against the Final Asset. This maybe through a report, or through some table entries.
    There's a t code AIAZ, but it tracks only the asset mentioned in the P.O., which in our case is the AUC. Table EKKN also tracks the account assignments for Purchase Orders.
    Let's say the AUC has 40 line items, whereas there are 5 Final Assets as settlement receivers.When the settlement entries are made from AUC to Final Asset, 5 entries will be generated in the foreground, but can we see the entries generated internally by the system, as in to see how the system has allocated values?
    Regards,
    Varun

    Hi Preeti,
    The t code FIAAIN_PO_TRACK mentioned above does not exist in our system. Does it need to be developed?
    Regards,
    Varun

  • Earmarked funds during goods receipt (GR) is not inherited from PO.

    Hi, Everybody u2026
    We are using Earmarked Funds relevant for FM updating, but, during goods receipt (GR) and invoice receipt (IR) it is not inherited from purchase order (PO).
    In ME21N the account assignment is F and the system ask us to enter the GL Account, Order and additional the Earmarked Funds. The system is deriving correctly the fund, the funds center and the commitment item from those entered in the Earmarked Funds.
    However, during goods receipt and invoice receipt, the Earmarked Funds is not inherited from purchase order (PO) besides the others account assignments (order, fund, funds center and commitment item ) in the coding block.
    Best regards,
    Thanks

    Hello,
    I will provide some hints:
    - If it is a service PO, please check the Note 972276 (Service Purchase orders only).
    - If the posting is related to Asset, please kindly check:
        a. Note 684659
        b. Check if you have a derivation rule in FMDERIVE with the function module FMDT_READ_MD_ASSET.
        c. Check in your FI-AA customizing if you have activated the account
          assignment element but you have not specified an account assignment type for
          account assignment object for APC balance sheet postings (see note 684659 for
          details).
    I hope it helps
    Best Regards,
    Vanessa Barth.

  • Asset transfer from One Business Area to another Business Area

    Hello,
    I am going to transfer my Asset from One Business area to another business area. So, I allready created a new asset and transfer through TCODE-ABUMN. But system gives me this error
    Posting with trans.type 320 not possible (No acquisition posted)
    Message no. AA324
    Diagnosis
    Transaction type 320 belongs to a transaction type group, which can only be used to post to assets to which posting has already been performed. However, no postings have been made to this asset.
    Procedure
    Use a transaction type from a transaction type group, which can be used for the first acquisition to an asset.
    can any one please tell me how I transfer my Asset from one business area to another Business area?

    Hi
    First make sure in your company code global setting in the OBY6 for company code wise ..Iin this screen  Indicator: Business area financial statements required if it is ticket
    Please  don't change business area for old asset . because it will effect the Business area balance sheet.  So create new asset and change business area at cost center level
    Finally transfer the balance from old asset to new assets in the ABUMN
                OR
    IF you want solution as per your issue ..Go to SPRO-> Financial Accounting-> Asset Accounting->Transactions-> Specify Default Transaction Types
    Here enter Default Transaction Types  300     Transfer of retir. old assets data from cap.asset
    in the filed of Transfer Between Areas
    I hope it will helps you
    Thanks and Regards
    sudharshana vamsi

  • Asset transfer from one plant to Another plant/Vendor

    Hello,
    Trasfer of asset from one location to another location/ vendor excise impact sholud flow without FI impact.
    Scenario is like this:
    we are creating Capital PO for AsSET procurment from Vendor with A/C  "A",  then in Item level of Delivery adress tab we check the "SC vendor" bcz our intention is to.
    Material directly sent to Different vendor and But stock is Shown in Our stock like "Material provided to vendor". After the GR
    Now this "material provided to vendor " asset we can send to Different plant/vendor with excise impact without FI Impact how to do this?
    Regards
    Mahesh

    Hi,
    Do a return to vendor from the first plant, modify the PO to include another line item to be received by the other plant and you can set the deletion flag for the first line item.
    This assuming that there is no invoice posting is done.. if yes.. then credit memos also come into picture.
    hope this helps

  • Asset Under Construction(AUC),During month end settlement run(via KO8G)

    Hi Guys ,
    please hlep on this AUC :
    During month end settlement run (via tcode KO8G), if there are -ve (credit) values to be settled to an Asset Under Construction (AUC) asset which does not have sufficient +ve value in the current FY, the settlement run will prompt an error message "Balance for transaction type group 10 negative for the area 01". The TT posted via the settlement run is TT115. To get around, user has to raise a manual journal (via doc type AT) to post the -ve value to the same AUC asset via TT101. TT 115 and 101 are configured differently (see attached).
    Since the Fixed Assets system does accept credit posting to AUC via a journal, is there a solution to make posting go through via the settlement run?
    Regards,
    Narra

    You can settle the AUC value in one period and posting can be made in another period. in the same you can give the different asset value date in KO88 screen. The only limitation is this possible only if the fiscal year is same.
    Give the asset value date as 15.07.2007 in KO88
    Hope this will work
    Radha

  • Creating Asset Lines from Projects

    Hi All,
    We have transactions recorded in Projects module which need to be sent to assets module for creation of assets
    However, the problem here is that they need to create many asset lines from one transaction (400-500 asset lines)
    Users have been manually completing information required to create asset lines from projects module and running the program to transfer to assets module
    In this case there are too many lines to create manually,
    Is there any workaround to this issue?
    Can the lines be transferred to assets module and then split on the prepare mass additions form? If so, can you please let me know the details, to transfer the line as a "multi-unit" line so it can be split on the mass additions form
    Thanks!

    I was thinking just that conroy, attached is a crop of the type of the black and white scan I'm working with, this was originally a trace, it is a very large document this is just one part of it.
    Thanks Noel I did mess around with your suggestions, not sure I achieved what I was after, it was either too strong removing everything or too weak.
    What I'm trying to do is get rid of the speckle (despeckle filter cleans it a little) and just have all the lines nicely redrawn and crisp. I've so far being doing it manually but it is 1) inaccurate and 2) taking me a very long time.

  • I have a generation 2 ipod which I inherited from my granddaughter, I want to copy the playlist from it to my PC, what do I do ?

    I have generation 2 ipod I have inherited from my granddaughter, I want to copy the playlist onto my PC, how do I do that ?

    After you have downloaded the 1.2.1 firmware, plug your iPod in and select it from under the Devices section in the left hand of iTunes.  Hold down the Alt key and press the Restore button. It should bring up a file browser/Windows Explorer window allowing to select an IPSW file. Browse out to where the file is stored on your PC and select it.  Then let the restore process complete.
    B-rock

  • Default File Permission not being inherited from parent Share folders

    I'm having some trouble with file permissions
    on one of my 10.4.7 file servers (running XServe).
    New folders under Shared folders are not getting their
    permissions from the parent folders.
    Share permission is owner:rw,group:rw,everyone:none
    but a new folder created below that becomes
    owner:r+w,group:r,everyone:r
    and the owner for the new folder is the user who
    created it and not the admin (for the machine).
    I have the default permission to set to inherit permission
    from parent but that doesn't seem to be working.
    I have couple other Xserve 10.4.7 file servers that
    is behaving the way I want, with default permission
    is being inherited from the parent folders, and I've compared them but cannot find any difference between
    the two in their settings.
    Thank you,
    Tadashi

    If you deny read and execute access for any parent folder, you've denied the ability to access its contents. The POSIX execute bit for folders is the switch that determines whether or not the folder's contents can be viewed, listed, or searched. If the contents are not enumerable, then it doesn't matter what their privileges are.
    But be careful. Just not allowing execute for the POSIX owner, POSIX group or POSIX everyone else field may not be sufficient if you're using Effective Permissions. In this case, you'd want to inspect your ACL entries for the parent to ensure that the following controls were not in relevant ACL Allow entries: readextattr, readattr, readsecurity, list, and search. You could also create an ACL Deny entry which denies these five controls for the group or user you want to block out; but don't block the Everyone or Authenticated Users group because ACL Deny rules are evaluated in such a manner that they "subtract from" ACL Allow and POSIX permissions:
    E <=> (P U A)\D
    Effective Permissions (E) are logically equivalent to the union of (U) applicable POSIX permissions (P) and applicable ACL Allow entries (A), taking away (\) applicable ACL Deny entries (D).
    Further, POSIX permissions, P are defined as P <=> (u xor g xor o); they are either the permissions of the owner (u), group (g), or everyone else (o) fields, but not any combination of the two or three.
    --Gerrit

  • Cost Center Inheritance from Org Unit

    Good day all,
    Can someone please advise regarding cost center inheritance from org units?
    I understand the inheritance concept, however simple need to know if the CCenter is added to the org unit via A011 relationship, does the system physically create a A011 relationship on the position inhertiting the cost center from the org or does the system simply pick up the realtionship from the org unit relationsip for use in IT0001 field KOSTL (cost center)?
    Thanks guys, have a lovely day!
    Christy

    Hi Christy,
    As we know cost centre(K) is an unusual object in OM.Two type of objects internal  whose master record are in database table beloging to sap erp hcm and eexternal object whose master data belong to other application areas.Cost centre is an external object that is used to represent origin of costs.Inheritance concept is on the basis of whoch cost centre are assigned in org plan.
    directly related cost centre is called master cost centre and they are made via A011 cost centre assignment relationsip.they can be made at org unit,position or work centre and nornmally its org unit that common.Org unit at the top are asisgned the cost centre as a best practise so that all the org units below or reporting will inherit the same.
    Similarly multiple cost centre assignments can also e made through 1018 infotype(cost centre distribution).Inheritance also applied to them aswell.
    Hope this helps.
    No Worries
    KG

Maybe you are looking for