Asset Intelligence Update Service Point fails to install

Hi,
I have one SCCM 2012 sp1 cu2 primary site running on Windows 2008 R2, and a separate SQL 2008 R2 database runnining in a cluster.
I installed the Asset Intelligence Service point using the default settings, but the component is critical.
When I look in AIUSMSI.log it tells me I do not have permissions to configure services - I am a local administrator on the primary server though and I can manuall stop and start services - error is:
Product: Asset Intelligence Update Service Point -- Error 1920. Service 'AI_Upate_Service_Point failed to start. Verify that you have sufficient privileges to start system services.
I ran the AIUS.msi and recieved the same error.
I went into services and stopped and restarted BITS, so my permissions seem fine. Has anyone else seen this problem?
Thanks
Jaz

I have created a Reddit in SCCM, describing my peoblem.
Please, can anyone take a look at it?
http://www.reddit.com/r/SCCM/comments/2jbkfr/asset_inteligence_update_service_installation_ai/
it goes like this:
I have came across an error entry in Monitoring node in SCCM console. Monitoring - System Status - Component Status, there was an entry about AI Update Service giving errors like this:
1) On 10/15/14 08:38:03, component SMS_SITE_COMPONENT_MANAGER on computer "SERVER FQDN" reported: Site Component Manager failed to reinstall this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the reinstallation in minutes. To force Site Component
Manager to immediately retry the reinstallation, stop and restart Site Component Manager using the Configuration Manager Service Manager.
2) Product: Asset Intelligence Update Service Point -- Error 1920. Service 'AI_UPDATE_SERVICE_POINT' (AI_UPDATE_SERVICE_POINT) failed to start. Verify that you have sufficient privileges to start
system services.
What I have tried to do: - Reinstall the role from ConfigMgr console
- Install the AI role manualy from .\ConfigMgr\bin\x64\AIUS.msi with elevated rights (domain admin rights) and from elevated CMD (domain admin rights) - Install the AIUS.msi with local administrator
account
Manual installation was both:
- During the time SCCM tries to reinstall the role by it self
- During the time the role isn't installed at all
- During the time the role was installed before it was uninstalled for the first time when I started troubleshooting this
Basically nothing can start the service during the installation, not even account with domain admin rights.
Do you have any idea what can I do next?
The IT guys from LukOIL

Similar Messages

Asset Intelligence Update Service Point fails to update

Hello,
as the titel says, for a couple of days now, the Site- and Component Status has been showing a critical error for the Asset Intelligence Synchronization Point, stating that the Update Service Point cannot be updated.
The system running is CM 2012 SP1 CU1 on a Server 2008 R2 SP1 Host with an SQL 2012 SP1 installation on the same machine. The AI Point syncs just fine and I can't "see" any errors in daily business tasks.
The AIUSSetup.log states that AIUS.msi could not be installed. Checking the AIUSMSI.log, I find the "error": AIUSDetectDowngrade_ErrorMessage = A newer version of the SCCM Asset Intelligence Update Service Point is already installed. Which
makes the MSI abort. Seems okay to me, but it retries every 60 minutes... is this a known behaviour/error? How could I fix this or turn the update off, if the whole thing's okay?
Cheers,
Fred

It's been a while since I posted this question and I've found a way to get this running.
The entire error message is a bit confusing, as the source was simple - the AI Update Service Point Service timed out when trying to start. Manually executing AIUS.msi, thus getting access to AI_UPDATE_SERVICE_POINT under services, which did not show up
earlier, then changing the startup type to delayed and changing the ServicesPipeTimeout value to 60 seconds in the registry (HKLM\SYSTEM\CurrentControlSet\Control) and then rebooting did the trick. Everything's working fine now.
Cheers,
Fred

Windows server update services installation failed the update could not be found

Hi everybody...
I have tried to install WSUS Role on windows 2008 r2 ent server. its says windows server update services installation failed.
actually the wsus role for SCCM 2007, asper the prerequesite i have finished all other steps, only wsus role is pending.. please help..

Thanks FinMaky,
The keys are:
(1) to delete WindowsUpdate registry keys, and then
(2) enable/restart Windows Update services.
(3) also to make sure there's no WSUS policy defining update server is in place
This resolves my issue.
BIG THANKS!
Tuesday, April 05, 2011 1:53 PM
Reply
|
Quote
|
Report
as abuse
FinMaky
---Pat

Acrobat Updater plug-in fails to install

I'm running Mac OS 10.4.11 on Mac G5 Quad, 6.5GB RAM, and whenever I run the Adobe Updater for my CS3 programs, I get a dialog box that says, "A new version of the Adobe Updater is available for installation. Click OK to install it now.", so I do, and it downloads and starts to mount a dmg or something, then I get an error message, "Adobe Acrobat Updater plug-in failed to install.", so I never know if it updated the rest of the Suite or not, can't find any info about this. Has anyone found the answer to this? Thanks! :)

Hi Meisha,
I have had the same problem for months now and cannot figure out how to solve this. I have seen another discussion with the same topic "Adobe Acrobat updater plug-in failed to install" but am unable to reply to the discussion for some reason. I'm new to using the forum.
Someone in that discussion (Donald Raymond) posted a command, but I don't understand how to effect the command nor how to reach him to ask him to clarify. The discussion link is here:
"http://www.adobeforums.com/webx?128@@.3bc4ba94"
I wish that Adobe would address this issue and give a valid solution. Otherwise, I'm unable to update my CS3 products on Mac OS. I also tried to install a download of a new Adobe update manager, but that didn't solve the issue.
I hope someone can help us!

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Reporting Services Point Role - Not installing

Hi,
I installed SCCM 2012 R2 and SQL Server Standard 2012 with Reporting Services. SCCM is running in secure (HTTPS) mode for both MP and DP. I have also configured SQL Reporting Services WEB URL for HTTPS (443)
Now I'm trying to install the Reporting Service Point Role but it wont install.
If I check Monitoring --> Reporting --> Reports its blank. Reporting Services on SQL Server is working properly.
I have the following errors reported
"Site Component Manager failed to configure site system "
Site Component Manager failed to configure site system
\\xxxx.xxx.xx to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager.
" to receive Configuration Manager Server Components.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager cannot install any Configuration Manager Server Components on this site system until the site system is configured successfully. Site Component
Manager will automatically retry this operation in 60 minutes. To force Site Component Manager to immediately retry this operation, stop and restart Site Component Manager using the Configuration Manager Service Manager."
"Site Component Manager could not find an NTFS partition on site system
\\xxxx.xxx.xx to hold the Configuration Manager Server Components' files.
Possible cause: The site system does not contain an NTFS partition.
Solution: Using the Windows Disk Administrator, create an NTFS partition on the site system, or convert an existing FAT partition to NTFS.
Possible cause: The site system is not exporting the default drive letter shares, such as "\\xxxx.xxx.xx\C$", "\\xxxx.xxx.xx\D$",
and so on.
Solution: You might have disabled the default drive letter shares for security purposes. Configuration Manager requires these shares. Please re-enable these shares using the Windows Disk Administrator.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site Component Manager does not have sufficient access rights to remotely administer the site system.
Solution: Verify that the accounts are properly configured to allow the site server to remotely administer the site system.
Possible cause: Network problems are preventing Site Component Manager from properly accessing the site system.
Solution: Investigate and correct any problems on your network."
I'm a bit perplexed because the admin shares can be accessed on the servers. Any help will be appreciated.
Thanks

I'm also seeing these in SMS_HIERARCHY_MANAGER
Hierarchy Monitoring detected that the SQL Server xxxx.xxx.xx Service Broker certificate has missed or is expired, and failed to remediate with Error Failed to read SQL SSB certificate..
Any ideas why this is happening?
I ran this query and looks like the cert is fine
"select s.name, c.name, c.start_date, c.expiry_date
from sys.services s
join sys.certificates c on s.principal_id = c.principal_id
where c.pvt_key_encryption_type = 'MK'
  and c.is_active_for_begin_dialog = 1
  and GETUTCDATE() BETWEEN c.start_date AND c.expiry_date
  and s.service_id > 2;"
http://schemas.microsoft.com/SQL/ServiceBroker/ServiceBroker
ConfigMgrEndpointCert
2009-01-01 00:00:00.000
2029-01-01 00:00:00.000
Why does it think my cert is near expired?

[Forum FAQ] Reporting Service Point cannot be installed on a Site System Server running SQL Server 2012 SP1

Symptom: When you install Reporting Service Point role on a Site System Server running SQL Server
2012 SP1, you may encounter an issue that the Reporting Service Point role cannot be installed. The error log “srsrpMSI.log” and “srsrpsetup.log” may throw the error as shown in Figure 1 and Figure 2.
03:32:03:764]:
MainEngineThread is returning 1618
Figure 1: Error -1
<03/03/14 03:32:03>
srsrp.msi exited with return code: 1618
Figure 2: Error -2
Reason: All the two logs indicate an error return code 1618. From the KB below you may know what
the return code means.
ERROR_INSTALL_ALREADY RUNNING
1618
Another installation is already in progress. Complete that installation before proceeding with this install.
KB link:
http://support.microsoft.com/kb/290158 “it is related to an Office Suite KB, anyway, the MSI return code is the same meaning”
You can look into Resource Manager and Event Viewer to find the other currently running MSI installation. You may get a warning in Event Log that means the MSI wants to install a SQL Server
related Component (Figure 3). The Resource Manager confirms this (Figure 4).
Event Log:
Event ID: 1004
Source: Msinstaller
Level: Warning
Detection of product '{A7037EB2-F953-4B12-B843-195F4D988DA1}',
feature 'SQL_Tools_ANS', component '{0CECE655-2A0F-4593-AF4B-EFC31D622982}' failed. The resource '' does not exist.
Figure 3: Event Log
Figure 4: Resource Manager
Resolution: the error is exactly what the following KB describes.
KB Link:
http://support.microsoft.com/kb/2793634
After we resolve the SQL Server 2012 issue, the Reporting Service Role is installed successfully.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.

ERROR: Update driver data failed (Cannot install any apps)

Error Code Summary
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: Updating driver data failed. Driver entry was notadded. ARP estimated size 0KB
Every time I try to install any form of apps this error pops up.
I’ve un-installed my entire suite due to the fact the desktop application wouldn’t let me update anything, as it claimed nothing was installed. Even when everything was installed.
So, at this point. I’m just sitting here, paying for something I can’t use, with a client waiting for the final product.
I’d appreciate any help I could get.
Thanks.
P.S. Yes, I restarted my system multiple times, used the Creative Cloud cleaner application to clean things up, and every one of the basic troubleshoot methods.

Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

Symbian Anna update 1/2 failed to install

The story so far. I did the first round Anna update (around 27 mb i think) OTA cos my Ovi Suite never able to update firmware on my n8 since trying to update it to PR 1.2, and I did try reinstalling, redownload, reboot PC, reg clean, ccleaner to fix the Suite but it still do not update my firmware at all. But that's another story.
So I installed the 1st round, n8 rebooted to white screen, rebooted into homesceen with Midnight theme. SW update then shows 4 more items: Anna update 1/2, 2/2, Store and Social. The 1/2 was showing around 20++ mb. So I selected all 4 and update. Halfway through the installing process of 1/2 update (note the download part of 1/2 was very fast), I did plug in the power pin, cos the installation process was damn slow for 1/2. I did not notice wheher it finised installing cos later i checked it was already on 2/2 (downloaded and installing). It then went to the last two items and installed ok.
Rebooted device, but SW update still showed Anna update 1/2 available (the only one left) and the download size is now 7166 kb. I proceed to update it, it failes with error but no error codes or any message what was the error about. I tried again and again, with fresh reboots, still failes. What gives?
Even more, split screen not here. I did the uninstalling Swype, activating qwerty mode in portrait, still no split screen. I do not have any Betalabs apps.
My Quickoffice & Reader is not here anymore (the app manager not showing them too). Heck I bought the full ver of Quickoffice 6 last time. Wat a waste of my money now that ver 7 is out!!
Anyone knows how to delete the "dowloaded cache" of SW updates? I want to force SW update to redownload this 1/2 item to try fix this issue.
Thanks for listening and please help. Cheers!!
Solved!
Go to Solution.

I got the same problem since this morning on both my N8 & just found out solution on a previous update error similar to this & completed the update on one of the N8. Re-trying on another one.
Working Solution for failed update was found on Flashism's website quoted & "touched up" per below:
Big thanks to user “Unick” on Nokia Support Forums, who posted a working solution to the problem, and there are couple of successful installs reported from the solution.
I just deleted folder E:\Private\20019119\. After that I ran SW update on the phone & it restarted download of Symbian Anna Update 1/2 & 2/2 as well as Social, they finished updates successfully.
To delete the mentioned folder, follow these simple steps:
• Connect your Nokia N8/C7 in Mass Storage mode to PC via USB cable
• Locate and delete folder named “20019119″ under \Private folder of Mass Storage
• Unplug the device from PC, and retry again. It should work.
However, I still got no popup split keyboard after completing the updates & restarted the phone.

Adobe Anchor Service CS3 fails to install

Trying to install Photoshop CS3, it always fails due to a component installation failure:
Adobe Anchor Service CS3
Skipping operation because required operation failed with code: 2
Followed a lot of forum suggestion, CS3Clean, uninstall this and that, the problem persists.
Both GUI and silent install have the same problem.
Tried installing AdobeALMAnchorServiceAll directly with
msiexec /i AdobeALMAnchorServiceAll.msi ADOBE_SETUP=1 UPGRADINGPRODUCTCODE=1 /qb

Dionysus_82 please see Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html for information on how to resolve your current error.

Security Update 2009-01 Fails to Install

Hey guys,
I've done some searching but haven't found anyone with any issues installing the Security Update 2009-01. Has anyone else had the install fail on them? My install.log shows:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Starting installation:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing volume "Macintosh HD" for installation
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Configuring volume "Macintosh HD"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing disk for local booted install.
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Free space on "Macintosh HD": 165 GB (178036584448 bytes).
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Create temporary directory "/private/tmp/SecUpd2009-001.pkg.278LCZ2ao"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Running install actions
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Processing SecUpd2009-001:
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Determining files to install
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/X11.app installed to /Applications/Utilities/X11.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/Podcast Capture.app installed to /Applications/Utilities/Podcast Capture.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Preview.app installed to /Applications/Preview.app
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: It took 0.91 seconds to create the install plan for SecUpd2009-001.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Removing obsolete languages
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: An exception was thrown from the install queue while running IFInstallElement. NSRangeException. * -[NSCFString substringFromIndex:]: Range or index out of bounds.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Install failed: The Installer encountered an unknown error that failed the install. Contact the software manufacturer for assistance.
Should I be asking here? I'm not sure if I'm eligible to talk to a Apple representative directly.
Thanks all!

I figured it out. I had sym-linked my /System/Library/Frameworks/Python.framework/Versions/2.5 to the macports version of Python. Restoring this back to the original 2.5.1 version fixed the problem.
If anyone else is having issues installing this update, make sure you restore anything you've modified (listed here http://support.apple.com/kb/HT3438) to the stock versions.
Cheers.

OSX Server 3 Failed to Update Services, Reboot Fails now

I upgraded my Mini Server to Mavericks, then installed the Server 3 upgrade (paid $19.99). The installation hangs during "Updating Services" and most windows become unresponsive. Remains in that state for hours. I lost patience and rebooted from a remote ssh session. Now the server doesn't reboot. I restored back to 10.8.5.
Has anyone encountered and resolved this condition?
To be precise, during the Update Services process, the gauge stops at the "d" in Updating... label.

I had the same problem. Finally found a solution that appears to work fine.
Using any free app uninstaller, remove "server" from your applications and remove it and all of its related files.
Empty the trash.
Restart your Mac holding down the 'shift' key. This puts you in safe mode.
Go to the Apple app store and re-download the "server" app.It will ,et you do this, becuase it cannot find a copy of the app anyplace on your computer.
After downloading and installation, configure the 'server' app following its commands.
Restart as usual .... presto ... works!
You can then re-configure as required.

ACR Update 6.5 fails to install

I have been trying to install ACR Update 6.5 on my MacBook Pro running 10.6.8 and CS5. I have tried running the updater from Photoshop and downloading the update and installing it and I get the same error every time.
Photoshop Camer Raw 6.5 Update
There was an error installing this update. Please quit and try again later.
The 3.5 upate for Lightroom installed without an issue.
Any ideas?
Thanks,
Doug

Go to the Camera Raw product page and download and install the update manually...Adobe Updater doesn't always do the right thing with regards to Camera Raw.

Security Update for exchange server 2013SP1 KB3011140 Stops all services and failes to install

Hi All,
Over the past 2 days this update has tried to run on the server in the evening but ends up failing. When it fails it is causing all of our exchange services to stop working and when we try to check e-mails the following day we find out the e-mail service
has been offline since the update.
Is there anything specific we need to do before running this update?
Cheers,

Hi,
As what Hotaka says, this update is available from
Windows Update. If it fails, we can also download and install the updates manually. The following stand-alone file is available for download from the Microsoft Download Center:
Download the security update for Exchange 2013 Service Pack 1 package now.
Download the security update for Exchange 2013 Cumulative Update 6 package now.
Regards,
Winnie Liang
TechNet Community Support

SharePoint 2013 March Update Installation Error: Failed to install application content files

Hi,
I've been trying to install SharePoint 2013 March Update. After installing when I ran the configuration wizard, I get the following error:
Task applicationcontent has failed with an unknown exception
Exception: System.NullReferenceException: Object reference not set to an instance of an object.
   at Microsoft.SharePoint.Administration.SPAspConfigurationFile.ApplyActionToXmlDocument(XmlDocument xdAction, XmlDocument xd, String sourceFileName, SupportedXmlDocutmentActions supportedActions)
   at Microsoft.SharePoint.Administration.SPAspConfigurationFile.MergeWebConfig(XmlDocument xdWebConfig, String fileMask)
   at Microsoft.SharePoint.Administration.SPWebService.ApplyApplicationContentToLocalServer()
   at Microsoft.SharePoint.PostSetupConfiguration.ApplicationContentTask.Run()
   at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
Has anyone found the issue?
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com

This is very painful situation .I was stuck on this till 2days and did goggling a lot.But didn't get the solution .I tried so many ways but no success .So finally I removed all the config and XML files from the C:\Program Files\Common Files\microsoft shared\Web
Server Extensions\15\CONFIG and run the PSConfig wizard again.This time got success finally .really unexpected.

Asset Intelligence Update Service Point fails to install

Similar Messages

Maybe you are looking for