Asset is dropped from subledger

Hi SAP gurus,
We have an issue here.
An asset is dropped off from subledger during P5 of 2009.(Mainledger figures are not matching with subledger). Till P4 of 2009 every thing looks good. During P5 we found that some thing has happend which in turn effected the balances of 2008 also.
We have checked history sheet of two years the APC and accumilated figures are not matching with each other and main ledger GL account. ANLC values for this asset has become "0".
When we ran ABST2 it is throwing error saing asset "XXXX"balances not uploaded properly. We have tried SAP not 104567 it is not wrokin.
My question is why ANLC values hae become "0"
Please advse.
Regards
Muralil

Hi,
I am not sure if this is the same issue I have faced. Basically I was able to locate which asset it was that was causing the problem. The problem I had was the asset did not carry over to the new fiscal year. Although everything was correct it was just stuck in the system. So i had to post a penny to the new peroid and then reverse it. By doing so I was able to get the values to come over properly, and thus the subledger was matching. Hope that helps
Thanks,
Rashad

Similar Messages

Why I can't drag and drop from lightroom?

Something I would expect from asset managment soft. Am I missing something?

dj_paige wrote:
While the programming of course could be done, the idea of a function that performs on original unprocessed images seems to violate the whole idea of what Lightroom was designed to be. At least that's my opinion. Of course, the idea that Adobe should do this programming for a relatively small number of people (you're one of a very few people to ask for this, that I have read) seems to be something that isn't going to happen.
I agree, I can't see much reason for drag-and-drop to drag the unprocessed image - in other words, an image that isn't the one that you see when you drag and drop. I can see that just filling this forum with "why the heck does it do that????????" posts. I could be wrong, but I suspect that Adobe won't do that.
But if you do want to drag-and-drop the original unprocessed image, you can do it very easily now. Right click the image, choose "show in Explorer", and then drag-and-drop from Explorer.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

Downloads dragged and dropped from Firefox download window into Outlook e-mail show as file location text.

I have a user who normally can drag files from Firefox's Download window into an e-mail in Outlook and it creates an attachment of that file in the e-mail. However, lately, the dragged .pdf or whatever file only shows up as a text file location like:
\\file:%Downloads%\randomfile.pdf
It's not a link either, it's just the text.
I've tried doing a repair of Outlook.
I've uninstalled and reinstalled Firefox 19.
I've tested dragging items from the desktop to the e-mail and it works fine.
I can't drag and drop from the Downloads window to the desktop.
I just wanted to add this user is using Windows XP Pro.

I can confirm that this is an issue with the newest release of Firefox. I just upgraded my Firefox, which was previously 18.02 to 19.0 and now I'm getting the same error. It's a bug.

HT4528 I have the 4s and i downloaded ios 8 but nowmy battery will drop from 100 to 0 in 30 mins without me using it. it has also happened to my sisters phone and our upgrade isnt until december. how can i get rid of ios8 for anyting else?

I have the 4s and i downloaded ios 8 but nowmy battery will drop from 100 to 0 in 30 mins without me using it. it has also happened to my sisters phone and our upgrade isnt until december. how can i get rid of ios8 for anyting else?

Downgrading the iOS is not supported. Basic troubleshooting steps are restart, reset, restore from backup, restore as new device

I can't drag and drop from a data CD I recorded

I recently burned some audiobooks files (in mp3 format) as data cd's in Toast 8.0.1. When I go to reload them back onto my 20" 2 Ghz Dual Core Intel I can't drag and drop the files directly into any folder while using the columns view in a finder window. I can do it if I drag onto the music folder and let it spring open down to the level of the folder. I also can drag the mp3's into iTunes and then into the folder. This is not CD related since I used several diff brands.
I constantly update, backup, repair permissions, and do other maintenance so everything is up to date. I have noticed this behavior just since I started to use the program called Audiobook Builder. I am (and have always used) a non-admin user account. When this started a few months ago it seemed to go away with a restart, permission repair, or a logout but now it seems permanant. I checked user permissions on my home folder - I have not added any software since adding Audiobook Builder. Any idea's? I read something about trashing a com.apple pref but didn't try that.
I suspect Audiobook Builder since it changes the permissions and filetype to the iTunes Audiobook filetype but have not seen anyone reference this.
wes

dj_paige wrote:
While the programming of course could be done, the idea of a function that performs on original unprocessed images seems to violate the whole idea of what Lightroom was designed to be. At least that's my opinion. Of course, the idea that Adobe should do this programming for a relatively small number of people (you're one of a very few people to ask for this, that I have read) seems to be something that isn't going to happen.
I agree, I can't see much reason for drag-and-drop to drag the unprocessed image - in other words, an image that isn't the one that you see when you drag and drop. I can see that just filling this forum with "why the heck does it do that????????" posts. I could be wrong, but I suspect that Adobe won't do that.
But if you do want to drag-and-drop the original unprocessed image, you can do it very easily now. Right click the image, choose "show in Explorer", and then drag-and-drop from Explorer.

I can't drag and drop from windows explorer into my ipod on itunes. Any suggestions?

Hi,
I manage my music/podcast library on my Vista PC using windows explorer because I don't like how iTunes does it. Then today I can no longer drag and drop from explorer onto my iPod in iTunes all I get is a circle with a line through it meaning "iTunes says no." Any suggestions?
Ta.

You will need to Sync your iPad and all Music/Albums Selected will transfer over from iTunes..
iOS: Syncing your data with iTunes
http://support.apple.com/kb/HT1386

User Exit - Create Asset Master Data from MIGO

Hi Experts,
I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
Cuold you help me?
Thank a lot.
Kind Regards
Giampaolo

Hi,
Why you want to create the Asset master at the time of MIGO.
Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
If it is that important in your business process then give the authorization of Asset Master data creation to User.
I personally feel this requirement is not feasible.
Regards,
Shayam

Asset Master Uploading from Legacy

Hi All SAP Gurus,
I am doing the Asset Master Uploading from the Legacy System. I am able to upload the data from transactions AS91, OASV. But I am facing a peculiar problem.
I want to uplad the balances in the middle of the year i.e. 1st Feb 09. My Fiscal year is from January to December. So whenever I am uploading the data & afterwards I am doing the Depreciation Run, the system is calculating the depreciation from January itself. I have maintained
The Date of the Legacy system transfer as 01.02.2009.
Last period of Posted Depreciation in Prv. System as 2009/01.
Can anyone tell me what is the problem? Whether this can be taken care by the shortened fiscal year?
Thanks in advance,

When you want that SAP calculates the depreciation for Januari the set-up is:
Take over date 31-12-2008 and last depreciation run old system per 12-2008
Whit this you have the option to run the depreciati for Januari or to do an uplanned depreciation that you post in Februari January and February
When not:
Take over date 31-01-2009 and last depreciation run old system per 01-2009 in that case you have to upload the depreciation from period 01 with AS91?
There are some other options to!

Drag and Drop from LR to other applications

There was a thread going on D&D from LR to explorer.
The other appliation problem I have is the apparent inability to drag and drop from lightroom into a file transfer window (e.g., file upload with SmugMug).
The quick collection is an awesome way to organize a storyline of images from a shoot, select only the images needed, and prepare a shoot for upload. However, short of exporting to a folder first, is there a way to just drag and drop the file set from a LR view (filmstrip or thumbs) to another app? This would just be providing file handles, and I would be satisfied if it only grabbed the original images (pre-"develop").
Anyone have any luck with this?
-- Jeff

No. And not likely anytime soon. Putting a Pointer/alias to SmugMug (if it is an uploader client app, not familiar with it) in the Export Actions Folder for Post Processing from Export is the best you can do at the monemt. To get LR rdits out of LR you have to Export. D&D just isn't going to do that for you.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

Message Mapping Error : "already dropped from buffer"

Hi,
today we have a new strange error in a simple message mapping File2IDoc thats results in SYSFAIL.
Maybe a buffer or memory error?
In short:
+/ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636+
In detail:
#2.#2010 08 18 10:49:51:619#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004B6000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
#2.#2010 08 18 10:52:45:149#+0200#Error#/Applications/ExchangeInfrastructure#
#BC-XI#com.sap.xi.util.misc#0026557C6A4004BA000000000000120D#229073650000000872#sap.com/com.sap.xi.services#com.sap.aii.ib.server.mapping.execution.JavaMapping#J2EE_GUEST#0#SAP J2EE Engine JTA Transaction : #0A1BAF81AA0111DF82D40026557C6A40#0a1baf81aa0111df82d40026557c6a40#0a1baf81aa0111df82d40026557c6a40#0#output#Java##
RuntimeException during appliction Java mapping com/sap/xi/tf/_xxxxx_Out_To_ARTMAS_ARTMAS05_A1_
Thrown:
com.sap.aii.mappingtool.tf7.MessageMappingException: Runtime exception when processing target-field mapping /ARTMAS05/IDOC/E1BPE1MARART[2]/DELN_DATE(suppressed field); root message: Index 2147483647 is already dropped from buffer. Cur offset is 2147483636
Thanks in advance,
André

Hi André, did you try to re-create de Message Mapping with the same source/target structures?
Regards,
Juan.

Flex 2 14 Battery Level Dropped from 57 to 7 in seconds

I've been using my Flex 2 14 for around 3 months. However, recently I've encounter a situation whereby my battery level had dropped from 57% to 7% in split second when I'm not plugged in. I was wondering could it be an manufacturing defect and what should I do to fix this problem?
Note: I use this laptop while plugging into the charger most of the time. The battery level is usually kept at around 55~60 only with the help of energy manager. Also, I had performed battery gauge reset once.
Any suggestions will be appreciated.

SOLUTION FOUND !
I just found a solution to my battery issue that is apparently due to a bug on the latest update of Snow leopard (10.6.8). Parallels desktop that was in the Dock was making the Dock taking 100% of the CPU activity (checked in the activity monitor) using battery and heating my computer.
After I checked for such cases on teh web (see: http://forums.macrumors.com/showthread.php?t=1181176 ), I removed Parallels Desktop and Windows Applications folder from the Dock and situation seems to be back to normal...
RF

Drag and drop from Lightroom into Premiere doesn't work in Windows

I recently switched from OSX to Windows and noticed that in Windows, I'm unable to drag and drop from LIghtroom into Premiere. In OSX, it worked fine.
I do this a lot because it's a time saver. I basically use lightroom to find the photo or video clip I need for my editing project and then just drag in right on to the Premiere timeline. Now I have to do the extra step in Lightroom of "show in explorer", then drag the file from explorer to Premiere. Not really a big deal but just curious why it works in OSX and not Windows.
I'm running latest Windows 8.1, Lightroom 5.4, Camera Raw 8.4, and Premiere Pro CC 7.2.2 (33)
-Pete

Hi Pete,
You can obtain scripts here:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrPlugins#MiscScripts
You'll have to edit lua code to adapt for Premiere. Not that hard really (e.g. clone, then change the script name and path to executable..), but may be too intimidating for some folks. If you are one of those folks, go for the plugin instead - it's usable via GUI - no lua code - can probably accomplish the same thing.
http://www.robcole.com/Rob/ProductsAndServices/OpenInWhateverLrPlugin
Let me know (outside the forum please) if problems - thanks,
Rob

Can't drag and drop from page view

Can't drag and drop from page view to desktop even though plus icon shows up for duplicating the page. On Mac 10.9.2 Acrobat XI. I don't want to extract through the menu and associated dialogues. Its slow and cumbersome.

Hi Peterbruce,
Acrobat for Windows will let you select pages in the Pages panel and drag them to your desktop, but that isn't an option in Acrobat for Mac OS. You can drag thumbnails from the Pages panel in one doc, to the Pages panel in another, however.
Best,
Sara

Can't drag and drop from Address Book to Mail?

Hi,
I have always used Address Book to store my email contact information in SL. When I wanted to send an email, I would drag and drop from Address Book to the "To:" field in Mail and it would add the contact information to Mail. I upgraded to Lion, and now when I try this, the address icon moves like it should, the little green circle with the + in it appears when I hover over the field, but when I release it does not add the address to Mail. The drag and drop does not work at all, but it looks like it should. I have searched all around but have not found any information about this. Does anyone know what's up with this? How can I fix it? Thanks in advance.

Are you dragging from the actual AddressBook application, or the Address icon you can add to the NewMail and Reply toolbars in Mail? (It ought to be there by default, but isn't).
Either should work, but if AB doesn't, try the icon method:

Asset is dropped from subledger

Similar Messages

Maybe you are looking for