Asset issue:AIST problem

Hi experts,
While doing entry in AIST,following error is coming:
Line item settlement is not possible for asset 9000 90014 0
Message no. AW050
Diagnosis
You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
However, line item settlement is not active in the asset class of asset 90014 0 (company code 9000).
If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
Procedure
Check the setting for 'status of AuC' in the definition of the asset class.
Pl advise.
Regards,
Samar

HI,
Go to OAOA, select the relevant asset class of the asset and under status of AUC, select line item settlement.
After doing the above, you will not get this error anymore.
Regards
Anuj Agarwal

Similar Messages

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

I've purchased an in-app purchase recently, which was a magazine issue, the problem is that I can't find it in the app! Any help about that?

I've purchased an in-app purchase recently on my iPad, which was a magazine issue, the problem is that I can't find it in the app! Any help about that? The app is called Forbes Middle East

Change your iTS password!!!!
Are these charges from Adobe or Apple?
Are these purchases from the App Store or iTunes Store?
Contact your credit card company and dispute the charges. Apple and Adobe will do nothing for you - it is your CC issuer that can help.
As noted these are user to user discussions. None of us here work for Apple or Adobe.
Contact iTS Customer Service via these links - http://www.apple.com/support/itunes/
MJ

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Is July 9 internet issue a problem for Mac Pro users?

Is the July 9 internet issue a problem for Mac Pro users or has Apple taken care of this issue in updates?

It is a only a problem for users affected by the malware that replaces their DNS IPs on their macs. They already have a serious problem which they should fix. Follow the url in sig's post to determine if you are infected and how to remove it.

Asset GR & GI Problem

Hi all
I have created an asset PO for 1 computer by assigning A as a Account assignment Category.
I have given the asset number and order number(single assignement) in accout assigment tab to which 1 computer is to be issued.
I made GR for 1 computer in MIGO with 101 mvmt type also captured excise invoice.
When I tried to post the excise invoice, I checked for Part 1 updation under part 1tab here I found that 1 computer Receipt is happened in 1st line, the same is issued in 2nd line AND THE PROBLEM IS AGAIN THE SAME 1 COMPUTER IS ISSUED IN 3RD AND 4TH LINE.
IN TOTAL
GR - 1 NO
GI - 3 NOS
SHORTAGE - 2 NOS
I posted it and while I see the updated RG23C regiter for part 1
I found 1 receipt qty, then 3 issue qty and finally in Total quantity in Stock i found 2.000- (that is -2). How it is happening and how to rectify this.
Pls help.
INFO: Only one material document is generated for the receipt and all issues. Also unable to track it in MM stock report as it is non-valuated material.
Regards
Srini

Hi
SAP PDF Document link.
Here u can get a doc related to Asset.
http://help.sap.com/printdocu/core/Print46c/en/Data/Index_en.htm
Regards
Ram

Asset Issue ?

Hi
I have a problem which says likes this at the time of a Down payment request creation:
Message no. F5378
The asset number assigned in the purchase document is different from the asset number entered manually
cannot be transferred, because the 'Asset number' field was hidden for the account in question
System Response
In the first instance a warning appears, drawing your attention to the different account assignments. In the second instance an error message appears, because the asset number must be transferred from the purchase order but the necessary field is hidden.
Procedure
If you receive the warning, check which asset number is the correct number for this down payment.
If you receive an error message, you must either choose another special G/L indicator for down payments so that it is possible to assign an asset number to the relevant general ledger account, or you must change or delete the the specified purchase document number. Only those purchase documents are allowed which are not assigned to assets
How can I solve this issue ?
Regards,
Pankaj.
Edited by: pankaj_ab on Nov 30, 2009 12:09 PM

Please either use transaction code F-47 or F-48. Have you done what the above notes specified? If not, please try it. Proceed as follows:
1. SM30
2. Enter T100S
3. Click on Maintain
4. Click on Position
5. Enter F5 for Area
6. Enter 378 for Message
7. If message 378 exists, change the standard message class from E to W.
8. If message 378 does not exists, click on new entries and make the following settings:
     - Application Area: 5
     - Message: 378
     - Allowed: EW
     - Standard: W
     - Save.
9.   Next, enter OBC4 and select your field status variant
10. Then double-click on Field Status Group
11. Select field status group: Reconciliation Accounts
12. Then, click on the magnifying glass " Edit field status"
13. Double-click on Asset Accounting
14. Change Asset number/subnumber to optional entry and save.
15. Next, enter OB41
16. Double click on Posting Key 39
17. Click on Maintain Field Status
18. Double click on Asset Accounting and then check off the radio button opt. entry. Repeat the same process for posting key 29.
19. Save
Go back and try the down-payment request using F-47.
Elias

Asset issue to vendor for jobwork

Dear Experts,
We want to issue an asset to vendor for some job work.We will receive the asset after completion of the work.
We want to charge depreciation for the asset as asset ownership is with us.
How to do the scenarioa in SAP.
Thanks and regards
Poonam

Hi Rob thanks for your response. I thought about doing an OSS note however; I would think I would need to get the problem in config corrected first as it contradicts each other. The problem I am talking about is how they are to return material to vendor....I have never even seen this as a process in my 10 years....
Process.....when the PO is a return to vendor PO they go to migo and choose the goods receipt and mvmt type 101 and the system will default the 161 in the item level....the two are inconsistent. If I try to change the top level to a 161 mvmt (as this is what I am used to seeing) it gives the error that the PO is not a stock transport order... Would you agree that I should correct that problem first before creating an OSS note?

Issue management problem

Hi all,
I am facing a problem in issue management in transaction solman_issue_mgmt transaction when i try to open a existing message i am getting a dump. the same dump occurs when i try to create a new issue using that transaction.
pls find the details of the dump .
I have applied not 1397754 also but still the problem persist.
kindly guide in this issue.
Error when processing your request
What has happened?
The URL http://ty-stfd0.ty-sap.os.itelligence.de:8002/sap/bc/webdynpro/sap/dswp_ci_issue_management/ was not called due to an error.
Note
The following error text was processed in the system TSD : View usage MAIN_USAGE_1 does not exist in window ISSUE of component DSWP_IM_ISSUE_VIEW
The error occurred on the application server ty-stfd0_TSD_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_EMBEDDED_VUSAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: IF_WDR_RR_VIEW_CNT_ASSIGNMENT~GET_DEFAULT_VIEW_USAGE of program SAPLWDR_RUNTIME_REPOSITORY
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT_CONTROLLER of program CL_WDR_INTERFACE_VIEW=========CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
Method: INIT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TSD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ty-stfd0_TSD_02 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ty-stfd0_TSD_02 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: SKRISHNAN -l: E -s: TSD -i: ty-stfd0_TSD_02 -w: 0 -d: 20100203 -t: 092939 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Regards,
Subhashini.

Hi Rajeev ,
Thanks for the reply.
i have checked the service, the specified service is active and tested also. the main screen apprears, the problem is with the next screen.
there is one more service dswp_im_issue_mgmt , the problem is coming with that service.
In our system, two service are active with the same name(dswp_im_issue_mgmt ) in that one is active and other is not active.
I tried to delete one but i got a message that the service is no more valid. is it because of this am getting the error
kindly clarify.
I tried to run the SIAC_LIST_UNPUBLISHED but it was not there in the system.
st22 details:
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WDR_RR_EXCEPTION
Date and Time          03.02.2010 08:11:33
What happened?
The exception 'CX_WDR_RR_EXCEPTION' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLWDR_RUNTIME_REPOSITORY'
has to be
terminated.
|Error analysis
|    An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WDR_RR_EXCEPTION', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
View usage MAIN_USAGE_1 does not exist in window ISSUE of component
DSWP_IM_ISSUE_VIEW

ICal Print List Hang / Font Issue / Sync Problems...

Okay, here's a couple issues all wrapped up into one thread/post - reason is cause I suspect they may all be tied together somehow, but am not sure.
Sync Problems...
Regarding the Syncing problems, you can find an ongoing thread about @ http://forums.markspace.com/viewtopic.php?t=1632
In short, some of us are having issues with events syncing to our Palm to the wrong timezone, causing them to be an hour off (usually within the new & old DST date change). Yes, all the usual fixes have been tried - pls read the thread noting "adairnet" and ymatto" postings.
Also, in addition to this time issue, I have iCal events that I've deleted in iCal still show up on the Palm after one-way syncing!
Print List Hang...
Every week I print a "list" of events from a certain calendar. The past couple weeks I noticed some lines in the notes field printing on top of each other. Twas odd indeed, but I hadn't had the time to look into the reason. Then this week I was going thru my usual printing proceedure and now iCal locks up, hangs up, crashes, forcing me to force-quit the program. It's usually after I extend the dates beyond 2 or 3 days, but I've not been able to find a consistency. I've redone events thinking they were corrupt with no success.
Font Problems...
After the Print List issue above, I opened my Console program to see if it was reporting anything. At first it indicated that it could not find Helvetica Neue and would substitute it for Helvetica. This put me in touch with some font corruption - so I got rid of those bad fonts and activated Helvetica Neue which got rid of that message. But made me wonder if there are more font problems causing the print hanging & syncing problems. I have FontAgent Pro and do have some font issues that I'm trying to work out.
But the Console is displaying another string of messages every time the Print List proceedure hangs up which I cannot figure out...
2007-04-24 16:24:54.151 iCal[28975] NSATSGlyphStorage inconsistency. Cannot find run storage for character range {138 67} for CTRun 0xDBE87D0. Ignoring the run...
2007-04-24 16:24:55.175 iCal[28975] -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:] called with out-of-bounds range. For apps linked on Tiger this will raise an exception. For earlier apps it will produce this one-time warning and continue with existing behavior (which is undefined).
2007-04-24 16:24:55.176 iCal[28975] * NSThread: ignoring exception '* -[NSMutableStringProxyForMutableAttributedString replaceOccurrencesOfString:withString:options:range:]: Range or index out of bounds' that raised during delayed perform of target 0xdde58d0 and selector 'renderPreview'
So, all of this is causing me to wonder if the iCal or SyncServices database is corrupt. Is there a way to dig into the iCal db and check for corruption &/or fix it?
Or does anybody have any further suggestions on any of these issues?
thanx.jason.

RedKamel,
The SyncServices folder should be avoided like "a swarm of bees". This article discusses some of the issues that can arise when the SyncServices folder is deleted or modified:
http://docs.info.apple.com/article.html?artnum=301920
Data loss and Data corruption can result from deleting or modifying the SyncServices folder, and that data loss or corruption can be propogated to devices, .Mac, and other applications that sync with SyncServices.
If you have isolated an issue with the other steps in your post, I would recomend speaking with AppleCare before removing that folder.
Hope this helps,
Nathan C.

Lenovo USB 2.0 Port Replicator Freezes Issues and Problems

Okay, I have THREE of these port replicators in my office, and ALL THREE have the exact same problem on various laptops(X1, T420, Edge 13) with various kayboard/mice. I've been through all stages of the port replicator drivers on the various systems, and the issue is always there. All laptop drivers are updated.
Here is the issue: working away, and then bam, mouse and keyboard don't work. I'm working in a external monitor only display setup. I go to the keyboard/touchpad on the laptop and they don't work...however ctrl+alt+delete works on the laptop keyboard(not the regular one). Then the touchpad works...but I can't click on any of the settings EXCEPT sleep. When I press a button to wake it up, everything works fine. Basic external keyboards/mice, no need for different drivers.
The other thing that fixes everything is unplugging the USB connection from the port replicator and plugging it back in to the laptop(or unplugging the power to the port replicator).
The weird thing is that I took the keyboard and mouse and they are plugged into the laptop itself, NOT the dock, and I still get the same issue with responsiveness. This happens on ALL the docks, so it's not a keyboard/mouse driver thing.
The one thing that's occuring to me is that maybe it's a weird display issue? I haven't tried actually using the external or laptop keyboard to run commands while it's frozen...and I also haven't tried unplugging things from the port replicator one by one (such as unplugging the display cable from the port replicator, then the printer, then the ethernet). I'll keep you updated if I get any further. It's been like this for months, and my users are just doing the workarounds. one thing is for sure...
I'M NEVER GOING TO SUBSTITUE THIS PORT REPLICATOR FOR A NORMAL DOCK AGAIN! (although i have no choice with the X1).

Hi skrasher, welcome to the forum,
could you please try the following to see if it changes the behaviour of the USB ports. In Device Manager, with the port rep attached, disable the ability on each of the USB Root Hubs for Windows to disable the device in order to save power, restart the system and see if the problem still occurs.
Let us know how you get on.
edit; for clarity
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Asset issue : profit center derivation in New GL

Hi,
I have configured & activated new GL Accounting in my system (ECC 6.0). All my splitting & derivation is working except for transactions related to assets. Whenever I try to do a posting against asset, I get following generic error.
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
Diagnosis
The field Profit Center marked as balancing is not filled with any value in line item 001, even after document splitting.
System Response
The document cannot be posted.
Procedure
First check your entries.
Additional causes could be:
No value can be derived for this field from the current document data.
You have entered a document type that is not designed for this business purpose.
I have done & checked the following :
1. given cost center in asset master which derives the business area. the profit center is given in the cost center master
2. checked the field status group for the asset recon. a/c, posting keys 70, 75 where PC is optional.
3. Confirmed that doc type AA and asset recon ac are characterised for splitting.
I am clueless why is the asset not taking the profit center during transactions.
any welcome would be deeply appreciated.
Regards,
Ryan

Hi,
Check for the Document splitting configuration as to whether you have assigned the Business Transaction and the Transaction variants to the Document type AA.
And in the step,Document splitting characteristics for general ledgers,whether the Profit center has been made manadatory and zero balance .
And also for the Field status groups related to Assets like G007 ,check whether the profit center is optional.
If still problem is there,revert back.

Asset Accounting implementastion problem

Hi sap Friends,
At the Time of create Asset master i have faced in the below problem.please help to my friends.
Customizing inconsistency - missing/incorrect entry in table T093B
Message no. AY159
Diagnosis
There is a Customizing inconsistency.
Chart of depreciation 1000 contains the real depreciation area 30.
In table T093B, the entry for company code 1001 and depreciation area 30 is missing or incorrect.
System Response
The transaction cannot be processed.
Procedure
Contact your system administrator.
Using transaction SE16, check table T093B for company code 1001 and depreciation area 30. See whether
1. there is no entry for them, or
2. there is an entry, in which the field ABGJA has the value '0000.'
In the second case, you can try to remove the assignment of company code 1001 / depreciation area 30, and then enter it again.

Hi.
Pls check note 872284:
Summary
Symptom
The following error message AY159 appears in user-defined transactions: Customizing inconsistency missing/incorrect entry in table T093B.
Reason and Prerequisites
This happens because depreciation areas can be maintained in the FIAA, which causes the above-mentioned inconsistency of the FIAA control table. The following happens when you maintain depreciation areas:
- at least 2 new areas are added, for example IAS and USGAAP
- the second area is added on the basis of the first area added (Copy button in the IMG)
As a result, the chart of depreciation is updated (Table T093), but only the first depreciation area (Table T093B) is updated for the company codes affected.
Solution
Implement the following workaround to save time: Remove the incorrect depreciation area (the second area, as described under Cause, for which there is then no entry in the control table T093B), save the change and add no more than one depreciation area
or
use the Copy button to add depreciation areas only on the basis of existing areas
or
copy the (in process) correction to the IMG.

Curve 9320 issue (hang problem)

Hello, i have purchased curve 9320 3G 1 month back but i couldn't use this more than 1 day, i use to freeze frequently, after inserting sim, it was running fine for 10-12 Hrs, after than when i received incoming call, it showed me the number and contact on screen but i could not received that, all the key got freeze that time and i had to hard boot that device by fetching the battery out, i also went to BB service center 2 times but they said its a normal antivirus problem, i m surprised how could a virus may get in to device as neither connected it to internet, BBM services nor to any PC through data cable.

Hello csamit2004
Welcome to BlackBerry Support Forums
Whenever you feel any problem always the first and best practice is to perform a Battery Pull Restart by removing the Battery while your Smartphone is Powered On , then wait for atleast a min. and reinsert it back .your device may take a long reboot . Rebooting in this manner fixes most issues within our BlackBerry Device , you won't loose any data while doing so .
Also be sure that you're closing all application correctly , If we press and hold the Menu for a few seconds, it will pop up a screen which will show all running programs in the background ,generally five will always there ( Home, BBM, Message,Phone , Browser ) you can always look if any other apps. are running in the background. Always try to Close Applications Correctly - Avoid using the End key to close applications as this simply minimizes the application and leaves it running in the background. Instead, press the Menu key, select the Close or Exit option to exit the application.Don't leave your Browser open on any active webpage when not in use.
If programs run in the background it may lead to device freezing and also quick battery drainage.Please have a look at this Article I am sure it will help you a lot in overcoming your problems :
KB14320 How to maximize battery life and free memory on the BlackBerry smartphone.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Importing Assets and Timeline problem

Hello I have just purchased and installed Encore DVD 2.0 (inside Production Studio), so I am a novice. I have several movies/ shows/ etc. I created by using the Record TV in the Media Center Edition 2005 software. I've converted the DVR-MS file type to Mpeg2 using Roxio Easy Media Creator 7.0/VideoWave 7.0.
Using Encore DVD 2.0 I tried Importing MPEG2 file using Import as --> Assets and Timeline. It looked like the importing was moving along the progress bar reaching approx. 3/4 point. Then it restarts the importing process again reaching the 3/4 point again stopping with a popup box appears with the text message, "Stream Requested Does Not Exist". When I click the "Ok" button the importing process stops. What can I do to get Encore DVD 2.0 to work properly? Am I doing anything wrong?
My Computer is a HP Digital Entertainment Center Z555 using XP Media Edition Center 2005.
Intel Pentium 4 processor 530j with HT technology
2.5 Giga PC3200 DDR Memory
NVIDIA GeForce 6600 PCI-Express graphics card
250GB 7200rpm Serial ATA hard drive

As far as I'm aware, Nero is just fine as long as you don't create DVD-Video with it, as there was a bug with this when it seemed to not set the correct start sectors for the IFO & BUP files.
It's just fine for burning from ISO images, and for all other tasks though.
And that bug may well have been squashed by now.
Lots of people use Nero with no troubles at all - it's not my personal choice, but that means nothing.
It's certainly far superior to Roxio.
I'm actually quite surprised that Roxio & Nero are actually playing nice on the same system!
The only possible other "Gotcha" with Nero is the packet writing utility. Do not install this - it can and does interfere with burning DVD, as Packet writing works by helpfully "looking" at your burner(s) on a regular basis to "see" if there is any blank media inserted, and it will offer to format this & use it as a drag n drop type writing utility. It's called "InCD", and if already present should be uninstalled.
There is a list of stuff that is known to cause problems - some occasional, some constant - with DVD authoring at
Neil Wilkes, "Things and Software to avoid when authoring for DVD-V" #, 13 Feb 2006 6:43 am
Additionally, the utilities included with Nero are generally of a much better standard than those with Roxio.
Nero Recode, for example, has been praised in many forums.
There are a lot of users who swear by Nero, whereas there are a lot who swear
i at
Roxio!
Hope this helps.

Asset issue:AIST problem

Similar Messages

Maybe you are looking for