Asset Linked to HR

hai,
Asset Master created in FICO.  MM purchased the Assets through purchase order and it will be updated in FICO.
In this case Laptob and mobile phone is purchased and handed over to the staffs.Is it possible to link that asset to the particular staff which was availbale in the HR Master. I am talking about the direct link to the HR module against the particular staff. Because the client want to know the asset under employee at the time of releiving the organisation.
There is option in HR in text form what are the assets given to the employee. But the client is asking at the time of asset creation itself it linked to HR employee master record  or HR to access the asset master in HR module regarding the particular asset.
Is it possible to link FICO to HR or HR to FICO. Expecting suggestions.
govind.

Hi,
I  have similar requirement to be configure to the client.
As per the above conversation, I have enabled  Personnel number HR field in the time dependent data.
But how to link this with Hr master data ?
Please help me how to use this and link with HR master data for employees.
Regards,
Chaitanya.

Similar Messages

  • It seems my asset links (mostly images) get placed in the WRONG location after exporting

    Hi There,
    I've been using the test version of Muse for the part 10 days and have really been enjoying it!  I'm about to launch my first site with it.
    But!  In my design mode, all the correct images are on the right page, and then often when I go to the "preview mode" or the "preview page in browser" or publish the website as a test, then it seems like the wrong photos (from other pages on my website) will then be displayed in another photo's spot.
    As if, some bug caused the assets link's to get mixed-up when I export the website to view it live.
    Here is my example.  (NOTE - for both these pages, scroll to the SIDE, not down).
    Here is one page on the website, notice this is the page for the WIRED store, all the images in here should be there
    http://imdefinitelyinnewyorkcityrightnow.businesscatalyst.com/wired-store.html
    Now look at this different page for a different entry, but, some of the images from the WIRED store page (above) are now placed into this entry?????
    http://imdefinitelyinnewyorkcityrightnow.businesscatalyst.com/muddguts.html
    Note, there should be OTHER images in the place where the image that says "WIRED" in blue is, same goes for the bottom half of that first image, in design mode, there is another image there.
    As mentioned, in my "design" mode the photos are all in the correct places, it's only when I get to the preview/export modes where it seems the links to the assets gets mixed up.
    Anybody have any idea about this bug or what I can do to change it? 
    Thanks in Advance,
    _Winston Struye
    www.winstonstruye.com

    I am having the same issue.  I have three layered elements as three columns in the body of the page.  When I add the farthest right element it pushes the other left elements to the bottom of the page.  There are aren't any other elements on the page.
    Is this a CSS issue?  I thought about exporting to Dreamweaver and fixing it there but would like to take the easy route first.

  • Does any one know how Fixed Assets links to the Purchasing ledger?

    Hi,
    Does any one know how Fixed Assets links to the Purchasing ledger? As I have looked high and low and can't find any table mappings or anyway the ledgers link, this is a problem as I am struggling to track an asset back to a Purchase Order.
    I have looked at http://etrm.oracle.com with no joy and any help with this would be great.

    You would want to try this forum as well:
    General EBS Discussion

  • Asset Link to Equipment

    Hello Experts
    I have gone through lot of material about Asset and Equipment Link but still have question if you can help.
    Can I assign more then one Equipement to Asset?
    Can I assign more then one Asset to Equipment?
    Thanks in Advance.

    Hello Friends
    Thanks for all the inputs. I am closing this issues and also providing feedback which I have received from forum members and friends.
    Can I assign more then one Equipement to Asset? - Yes this is possible and you can see all the equipment in asset master under allocation tab. You will be only able to see equipment no. under allocation tab once settings are activated. I was trying to look for equipment no in asset master but couldn't find because settings were not activated. Hope this will help.
    Can I assign more then one Asset to Equipment? - This is not possible.
    Thank you.

  • Assets linked to Custom Objects

    Hi All,
    I'm trying to find a way to represent the link between a Custom Object and an Asset. I know I can create an Asset under a Custom Object as a related record, but if I look at the details for that Asset, there is no field I can locate that will indicate the link between the Asset and the Custom Object record.
    I'd appreciate any advice on how I can overcome this problem.
    Cheers,
    Cameron

    Thanks for your post Prakash.
    Unfortunately though I can't really use the vehicles record type as I'm somewhat restricted by my current system design.
    So does this mean that there is no field on the main Asset record type that can link to any of the Custom Object record types?

  • Where is the Assets link for Dreamweaver?

    The beginning users tutorial for Dreamweaver tells the user at 1:30 to download the Assets from a link at the top of the page, however there is no link.  Please advise.

    The link is highlighted in the following screenshot:

  • Always assets links are missing when changing the location.

    Hi community: Can you share your ideas with me?
    Since adobe muse older versions, asssets files are missing when changing the location or computer. For example develop some project on "desktop" when it move to another location( ex: Another partition or folder with different name), assets says links are missing, we have to relink all assest, is there are any way to fix it? why is that keep happenings? when i design muse templates to sell, it is serious problems to me .
    Can you help me, thank you community!

    Hi,
    Oracle have a tool for precompiling JSP's it's called ojspc
    You can then turn JSP compilation off on the server.
    Here's a batch file that I use.
    Brenden
    @echo off
    set ORACLE_HOME=C:\[Jdev_install]\jdevstudio10133
    if not exist %ORACLE_HOME%\j2ee\home\ojspc.jar goto error
    java -Djava.compiler=NONE -Doracle.home=%ORACLE_HOME%  -jar %ORACLE_HOME%\j2ee\home\ojspc.jar -extend com.orionserver.http.OrionHttpJspPage yourapp.war
    goto end
    :error
    @echo ERROR: %%ORACLE_HOME%%\j2ee\home\ojspc.jar not found.  Please set ORACLE_HOME to point to an OC4J or OracleAS instance and retry.
    :end
    if "%OS%" == "Windows_NT" endlocal

  • Browser Compatibility Error in DW CS5 assets link Please help New to Dreamweaver

    Please can anyone help? Using DW CS5  -.Using Spry Menu Bar 2.0 - have it all formatted - ran Browser Compatibility -Shows my Spry link reference has error. Here is the code
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
           <link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
           <style type="text/css">
           body {
    Error is underlined at:  <link href="SpryAssets/SpryMenuBarHorizontal.css"
    It is located in the page head just below the banner
    I am new to dreamweaver..I do not know how to fix this code..
    Running Win XP. Thank you in advance for any help you can provide.

    In case you need it the link to this page is:
    http://www.bountifulspinweave.com/aboutus.htm
    It is  spry menubar 2.0

  • Is it possible to have an asset link to the previous page?

    Hello!
    Okay so I my website have over 200 pages and I wanted to make a single button that functions as a web browsers back button.
    Is this possible or am I going to have to put an asset on each individual page telling it to go back to the specific page that it was just on?

    Hi,
    There is html code for back to the previous page.
    Google it to be sure to get the one that works for you.

  • Error while Asset retirement by scrapping.

    Hi ,
    We are getting following error while doing asset retirement by scrapping using transaction ABAVN.
    "Transaction in area 10 contradicts the net book value rule." Message no. AA660.
    Following are the asset values.
    Area 01   : Acq. value 64578.00,  Ord depre 12806.92 ,  Net book value: 51771.08.
    Area 10   : Acq. value 64578.00,  Ord depre  29970.80,  Net book value: 34607.20.
    Pl. help
    Shripad

    Hi,
    when trying to retire an asset linked to  a group asset, please carefully check the  values on your group asset.
    Sometimes the error occurs if a dep. area is assigned to a group asset and the transactions on this area amount to zero.                                                                               
    May I invite you to review below notes also. You may find, that certain constellations with your situation could    
    be valid, too.                                                                               
    136634 AA660 Credit memo in subsequent year                            
    32901  General information on the memo value                           
    14028  Error message AA660 or 632 during retirement/transfer           
    141656 Negative net book value, neg. APC, below zero depreciation      
    327088 Definition of the delivered transfer variants 
    regards Bernhard

  • How can I auto-update all book file links after making a new copy of my project?

    Using Indesign CC 2014,
    Windows 7x64.
    I've created a catalog, using a book file (.indb) which connects 20 Indesign files (.indd) together (so page numbering is continuous, etc).
    Each of the 20 Indesign files all have numerous art asset links and cross references. In total, ~200 files are involved.
    Once finished with the whole thing, I made a copy of the entire folder structure and placed it elsewhere, because I now need to create a modified version of this catalog project for a different company.
    In the end I need to wind up with 2 different, but very similar catalogs.
    Here's my problem: when I made the copy of the entire project and opened the copied over book file, I've found that it's still referencing the older 20 Indesign files back in the first folder structure.
    It's not using the new stuff.
    Same goes for all the art asset links inside each Indesign file.
    Looks like absolute paths only.
    What's the standard operation procedure here? What can I do to avoid having to manually re-link numerous art assets, etc?
    Surely, this is a common need among Indesign users.

    Hey, Peter!
    I've delayed my response here.
    Been dinking around, trying things.
    That's a smart suggestion, but the Package command will round up all assets into a nice compact folder structure ready for production. It's not really what I need.
    I need to keep things as they are, fully editable and unaltered - my folder structure is carefully crafted as is, and I definitely don't need all the fonts dumped into a folder.
    Here's what I'm doing now - I make a complete new copy of the folder structure in question. It includes all InDesign files and linked artwork, etc. Everything.
    I then CHANGE the name of root folder of the folder structure I initially copied. This breaks all the absolute paths of the copy.
    Then I open each InDesign file and the CORRECT links are still automatically found because it looks inside the new folder structure I just made by creating the copy. So all links get "fixed".
    Thank goodness InDesign is far more intelligent about finding missing links than Illustrator.
    This is the best solution I've found. It's not perfect, but nothing ever is.

  • Asset is incomplete and has to be completed

    Dear experts
    while closing the asset year 2008 im getting the error "Asset is incomplete and has to be completed "
    I opened the transaction code AUVA
    I got incomplete assets list with depreciation start date for 15 depreciation area.Please find the below asset details which i got from AUVA transaction code.   
    Asetcomplete.ind ;States Of Completeness,    layout,   FG,   feild name,       Deparea,   View,     Views,
    600658,         1,     Red color,                       1000 ,       03,   ANLB-AFABG,      15,           1,           13,
    But im unable to enter the depreciation start date in the asset master data for 15 depreciation area as it is display mode
    Could you please any one tell me how can I change the  asset depreciation start date in display mode or complete the asset from incomplete asset status
    Now my year end  activites are pending due to this incomplete asset statues.
    I can not nopt delete the asset as already capitalaized the same.
    Thanks in advance
    Suneetha

    AS23 group asset already maintained depreciation area.
    depreciation start date is not maintained for main asset 15 depreciation area not for group asset
    for main asset we are maintaining 01 and 15 depreciation areas.for 01 depreciation start date has been given for 15 area deprecition start date has been given
    main asset linked group asset already maintained depreciation start date for 15 area.

  • Linked Smart Objects - File Size Question

    Hey guys,
    first time using linked smart objects and I was pretty excited about it at first. I have a large photoshop file with 1920x1080 image assets. The file size is about 1GB and everytime I make a minor change the entire file has to be re-uploaded to my Dropbox.
    So I figured that I could make all these image assets linked smart objects so that I can keep the master file down in file size since most of the actual assets don't change. However, even the PSD that contains nothing by linked smart layer objects is already 400MB large. And that's in addition to the external PSD's it is now linking to.
    Even if I duplicate a linked smart layer object in this PSD file it increased the file size by an additional 10MB per duplicate. Is this supposed to happen? Why does it take so much space to just link to external objects? I was super excited about using linked smart layer objects but this doesn't look like it would be helping much to decrease file size.
    Any thoughts would be much appreciated!
    Thanks,
    Philipp

    Hey Chris,
    thanks again! I guess I just had different expectations. In my mind I was going to see a parent file around 10MB or something with all of the content being dynamically loaded from the linked smart objects.
    Maybe that could be a feature requests for future versions.

  • Linked Images : Automatic Folder Creation for linked images?

    Best Rgards
    Mac OSX 10.9.3
    InDesign CC (9.2.1)
    Presently: 120 page Blurb publishing with 190 images
    I have created a large number of INDD documents that I piece together from many sources,
    such as file folders, internet searches, external drives, emails...kind of grabbing things
    from all over the place. usually I publish this as a PDF for local and archival use. Sometimes
    using this also for newsletters and other ways to distribute documents as pdf and epub.
    I never really paid to much attention to LINKED FILES and where they might
    be located, as my intent was PDF and you can publish a very
    serviceable Pdf without verifying or correcting MISSING LINKS...
    NOW, I am working on a higher end 120 page Photo BOOK to have printed on paper.
    I did not organise my image assets into a folder, i should have first. Now as I go to
    upload to the publisher I find I have to many missing links to images. So I am going
    back through the whole project and organising the assets and re-linking...what a lot of work this is.
    I was wondering if InDesign supports automatic creation of assets folder?
    As you place images, with their links, the program creates a folder and puts a copy of the file there?
    I don't see anything about this subject.
    I am wondering why not? It would sure make the work flow speed up. Options for
    the format, size, pip etc. Does this exist in InDesign and if not
    wtf not?
    Sure would appreciate anyone's thoughts on this. It is to late now to save this
    relinking 190 images, but I realise I need to be better prepared with my assets in the
    future. I work on a number of publications, some spontaneously and others
    more carefully planned...some sort of auto process for asset-linked-folders
    seems a simple enough coding issue. It is 2014 already.
    ???....best rgards, Thanks for any input on this issue.
    WF Posey
    Pantelleria Italy

    Thanks to everyone for these answers. I guess the real answer is "no", Adobe software engineers see no reason to create a script which
    will place linked files into a folder. To bad. A really serious and lazy oversight in my view. The package function is helpful if one has already
    organised their assetts.
    As great as these programs are, this is an oversight of some frustration. As I said in my comments above, it seems an easy enough routine to program
    into the app. Why should a user have to worry about collecting details of resources/links for a document?
    Even after all these years?
    Best regards, thanks to everyone who contributed some thoughts.
    WFP

  • No links is available from CQ 5 welcome page

    From the CQ welcome page ("http://localhost:4502/libs/cq/core/content/welcome.html") none of the links are accessible. For example if  I click on "Digital Assets" link it will be redirected back to the welcome page.
    I have tried direct link of site admin "http://localhost:4502/libs/wcm/core/content/siteadmin.html" Its also redirecting to the Welcome page
    I've checked error log. Didn't see any errors logged
    I'm using CQ5.3
    Can somebody help me on this.

    Hi,
    Its pretty wierd but i will suggest you to do below
    1. Check the server.log, stderror.log, error.log at start of server (CQ 5.3).
    2. Also access http://<host>:<port>/system/console to check the health of system
         - Check all the bundles activated propertly - these will be used by above mentioned applications
         - optionally also check http://localhost:4502/system/console/repositorycheck (health of your system) sometime may help to understand the issue.
         - Also collect thread dump http://localhost:4502/system/console/profiler which can also help to track issue.
    Thanks,
    Pawan

Maybe you are looking for