Asset master creation (run time error)
Dear all
I am facing problem with asset accounting at that time creation of asset master getting to run time error message
Error message: GETWA_NOT_ASSIGNED
Fields symbol not yet been assigned(segment 32770)
Thanks & Regards
suresh
Edited by: prasad y on Jul 5, 2011 3:23 PM
Dear:
Please check notes, they have to be implemented in the system
992846
988238
Regards
Similar Messages
-
Run time error while running BDC for production order creation and confirmation:
Dear Gurus,
We have a situation, where the users are trying to do the entries creation of order or confirmation (through manual and BDC). But, if there is any kind of a deficit quantities in consumption or GR quantity, then it is going to run time error and Dumps are coming in program SAPLCORB
and the transaction code is coming for CO11N.
How to avoid this error to run the production system in smoothing way...Any flash lights on this will be great full
Regards,
Madhu.GHi Madhu,
Expert Caetano has rightly point out. Refer Note 1840705 - RAISE_EXCEPTION short dump if running CO11N in background
Cause
The short dump is triggered because SAP transaction CO11N contains new GUI elements that cannot always be dealt with in a background process,
such as the confirmation texts.
Resolution
SAP recommends that the standard production order BAPIs, such as BAPI_PRODORDCONF_CREATE_TT, should be used to post a confirmation in background.
If this is not feasible, the following workaround may be uses:
Define a confirmation profile in transaction OPK0;
In the detail areas, remove the area "Confirmation text";
Set this profile as standard, so that it is chosen automatically by the system when a batch-job
is started;
Assign this confirmation profile to the batch user with transaction SU3 using parameter CORUPROF.
Also see Note 429432 - CO11N: Batch input in background dumps if long text is maintained
Refer to note 1154692 - Endless loop during confirmation in background if you doing Auto GR during confirmations
Thanks & Regards,
Ramagiri -
Run time error while create Vendor master via MK01
Dear Experts,
when i try to create vendor master by MK01.....system throws run time error as below:
"The exception 'CX_BADI_MULTIPLY_IMPLEMENTED' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program
'CVI_MAP_TITLE=================CP' has to be
terminated."
My current system is ECC 6 along with DBM. Business partner configuration is activated in the current system. I am getting this error after BP configuration. Could you please help me to fix this issue?.......Is it due to configuration or a dump from abap program?
Regards
VetrivelanHii,
please search sdn before posting the threads.
check these links, it may help u............
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
Short Dump - CX_BADI_MULTIPLY_IMPLEMENTED - BADI Q1SR1
CX_BADI_NOT_IMPLEMENTED
thanks. -
Error in Asset Master Creation
In Asset Master Creation an error occured that is
CUSTOMIZING INCONSISTENCY MISSING/INCORRECT IN TABLE NO T093B
Waiting for u r early reply
venky
Edited by: venky venky on Jul 11, 2008 2:53 PMI suppose you need to check your configuration of Low Value Assets for each
depreciation area.
But before that, please tell me which class of Assets you are using ......Is
it the *LVA Class 5000 ( individual management )* or* 5001 ( collective
management)*. Either way, you need to assign a maximum value / maximum value
over quantity, as the case may be. Unless and until you furnish a value cap,
the asset class does not permit you to create asset master records.
Please look into your IMG under the path:
*IMG -> Financial Accounting -> Asset Accounting -> Valuation ->Amount
Specifications(Company Code / Depreciation Area) ->
Specify Maximum Amount for LVA + Asset Classes*
You would see two activities listed.
Under *Activity 1*, you need to select and assign value check (*represented
by number 1*) if you are using *LVA Class 5000* ; alternatively, you need
to select and assign Check Maximum Amount with Quantity (*represented by
number 2*) if you are using *LVA class 5001*.
You need to do this for each depreciation area you wish to apply this value
cap to and save (using the floppy icon and look out for the confirmatory
message at the bottom left of your screen).
Under *Activity 2,* You need to furnish a value cap ( a ceiling in monetary
units, currency-specifically) for each depreciation area ( a column for
document value and another for Purchase order value ( possibly to
accommodate any tax, as applicable). Please make sure that you do it for
your company code and for each depreciation area wherein you want to control
using a value cap.
Save and look for the confirmatory message at the bottom left of the screen.
Regards,
Bharti -
Run time error when trying to complete a build
Hi,
I'm running a copy of CS5 Master Collection on a Windows 7 64 bit PC and using Encore to build an interactive DVD. I have been using the program for about a year and had no problems however this week I have been unable to complete a build.
When I set the program to run a build, it spends a long time (over an hour) building motion menus, then moves on to 'Transcoding' and at some point in this process I will get a "C++ Run Time" error message and I am forced to shut down the program and start again.
I have tried building both a DVD Disk and a DVD image but both have the same result. I have also set the assets files to 'Dont transcode' in the project bin however this does not make any difference.
Can anyone suggest anything else I could do?
Thanks
ChrisHi,
Many thanks for the advice. I wanted to give you a bit more information.
I have just attempted another build using 'Run as Administrator' ( to rule it out) however it has come up with the same message at the same point.
The message is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:\...
This application has requested the Runtime to terminate it in an unusual way
Please contact the application's support team for more information.
To answer your questions: I am not using Dynamic Link or Premiere Pro for this project. The video files I have imported were created in either 3D Max or Aftereffects. These files were rendered as lossless AVI's and then we used Sorensen Squeeze to convert them all into DVD native MPEG2 files. The audio files we are using were converted to DVD native audio files (MPEG2 audio) in Aftereffects.
We did this in an effort to ensure a high standard of quality.
Regarding the kind of files - we are giving encore the MPEG2 video files, MPEG2 audio files and PSD menus.
One other thing to mention - the error comes up at the same point each time I try a build. The progress screen on encore says 'Transcoding' however we have set all of the files to 'Don't Transcode' - this seemed strange to me however I could be wrong.
We do have some long file names in the project so I may have to amend these however I wanted to see if you could suggest anything else first.
Thanks again,
Chris -
Run time Error while Creating Expense request
Dear Friends ,
In E-Payment ( Expense Claim ) creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "LR_CONTEXT_ELEMENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
"CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
"PRESET"
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
in "PRESET".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 60
of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
in the RAISING clause of its signature.
The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
code begins in line
1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath -
While creating a student through piqstc getting abap run time error
Hi Experts,
I am new to SLCM,
By following Micheal Fan's Basic configuration document,
I have done the basic configuration required for creating a student & maintaining the student file,
But while trying to create a student through PIQST00/PIQSTC getting abap run time error,
Attaching the txt file for complete view of abap error.
Please guide how to resolve this error.
Regards,
Prashanti SwainHi Rob,
Thanks a ton, for your quick reply,
But I have not understood the reason of the issue.
As i said I followed Micheal Fan's Document for configuration,
in that document there is no configuration step is defined for Vendor master data.
Could you please explain it in a more detail way.
Regards,
Prashanti Swain -
Run Time Error in Account Determination
Dear Friends
In my system using std one for account det then it posting to FI.
Now I created my own Table, Access Seq, Condition Type and Procedures after all assignment when I assign my procedures to F2 .
Then I done sales cycle upto billing, but when I am trying to save it it shows Run time Error. if assigning the Std Procedure KOFI00 to F2 then it is ok.
give me solution
Thanking You
ArunDear Arun,
Can you provide in detail !!
What is the error you are getting when you save the invoice
Check the settings at all these steps with compare to the standard setings.
SPRO>IMG>Sales and Distribution>Basic Functions>Account Assignment/Costing-->Revenue Account Determination.
-->Check Master Data Relevant For Account Assignment
-->Define Dependencies Of Revenue Account Determination
-->Define Access Sequences And Account Determination Types
-->Define And Assign Account Determination Procedures
-->Define And Assign Account Keys
-->Assign G/L Accounts.
I hope this will help you,
Regards,
Murali. -
ABAP run time error in Plant Maintenanace
hi experts,
i am creating order for external service with control key PM03,
I've done all required configuration and 12 orders were created also,but now ABAP run time error occurs,
Short text
with short text description
Exception condition "RECORD_NOT_FOUND_TCK01" raised.
i called up ABAP consultant,he told me to check all field and configuration,and am not able to pin point sources of error,
please guide for this,
thanks
Edited by: Pravin on Oct 20, 2008 11:58 AMDear Praveen,
I think your problem may be space of hard disk.11 records created succesfully and 12 record was creation problem.in thease reasons may be problem is table space in hard disk.
you ask first basis guys to check the data storage space and kindly run the sgen
Hope this may helps you
Prem. -
Run Time Error "CALL_FUNCTION_NOT_FOUND"
Hi Friends,
I am not able to create Material Master Record in Material Master Table due to Run time Error " CALL_FUNCTION_NOT_FOUND"
The Following information found in the error screen,
Short text :
"CRM_GET_TRANSFER_STRUCNT" not found.
what happend:
The Function Module "CRM_GET_TRANSFER_STRUCNT" is called,but cannot be found in the library.
Error in the ABAP Application program
The Current ABAP Program "SAPLCRMO" had to be terminated because it has come across a statement that unfortunately cannot be excuted.
Thanks
Anveropen SAPLCRMO with SE38 find the place where the "CRM_GET_TRANSFER_STRUCNT" is called.
Check then this program part if it was modified in your company or if it is standard SAP coding.
then either talk to the modifier, or open a message a SAP.
(I dont find "CRM_GET_TRANSFER_STRUCNT" as function module in my system, and I dont have a call of this FM in my SAPLCRMO program) -
Help with Run Time Error Please....
I got this Run Time error when I tried to execute a Swing program I was trying to run and I was wondering if anyone could explain what it meant and how I could go about fixing the situation. The program ran with no problem when I executed it yesterday but this morning, It failed for some reason .
My Classes name is GUIcheck.java
Exception in thread "main" java.lang.UnsupportedClassVersionError: GUIcheck (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(Unknown Source)
at java.security.SecureClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.defineClass(Unknown Source)
at java.net.URLClassLoader.access$100(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
I have posted the program below for your viewing ..
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class GUIcheck
public static void main(String args[])
JFrame.setDefaultLookAndFeelDecorated(true);
JFrame frame = new JFrame ("Student Data Sheet");
//Frame.setDefaultLookAndFeelDecorated(true);
//Create the top panel. This panel will use the grid layout and
//will contain two labels (name and Social Security Number) and
//two text boxes (nameTextField and ssTextField)
JPanel topPanel = new JPanel(new GridLayout (2, 2, 5, 5));
JLabel nameLabel = new JLabel ("Name:");
topPanel.add(nameLabel);
JTextField nameTextField = new JTextField(10);
topPanel.add(nameTextField);
JLabel ssLabel = new JLabel ("Social Security Number:");
topPanel.add(ssLabel);
JPasswordField ssTextField = new JPasswordField(10);
topPanel.add(ssTextField);
//Place the topPanel on the North side of the frame
Container contentPane = frame.getContentPane();
contentPane.add (topPanel, BorderLayout.NORTH);
//Create the center panel. It will be placed in the center of the
//frame. It will contain two sub panels. One sub panel will contain
//labels (Select sources of news and information and Classification).
//The second sub panel will contain check boxes and radio buttons)
JPanel centerPanel = new JPanel (new BorderLayout ());
JPanel centerTopPanel = new JPanel (new GridLayout (1, 2, 5, 5));
JLabel sourceLabel = new JLabel
("Select sources of news and information");
centerTopPanel.add (sourceLabel);
JLabel classLabel = new JLabel ("Classification");
centerTopPanel.add (classLabel);
centerPanel.add (centerTopPanel, BorderLayout.NORTH);
JPanel centerBottomPanel = new JPanel (new GridLayout (1, 2, 5, 5));
JPanel checkBoxPanel = new JPanel (new GridLayout (3, 1, 5, 1));
JCheckBox newspaperCheckBox = new JCheckBox ("Newspaper");
checkBoxPanel.add (newspaperCheckBox);
JCheckBox tvCheckBox = new JCheckBox ("TV");
checkBoxPanel.add (tvCheckBox);
JCheckBox friendsCheckBox = new JCheckBox ("Friends");
checkBoxPanel.add (friendsCheckBox);
centerBottomPanel.add (checkBoxPanel);
JPanel radioButtonPanel = new JPanel (new GridLayout (4, 1, 5, 1));
JRadioButton freshmanRadioButton = new JRadioButton ("Freshman");
radioButtonPanel.add (freshmanRadioButton);
JRadioButton sophomoreRadioButton = new JRadioButton ("Sophomore");
radioButtonPanel.add (sophomoreRadioButton);
JRadioButton juniorRadioButton = new JRadioButton ("Junior");
radioButtonPanel.add (juniorRadioButton);
JRadioButton seniorRadioButton = new JRadioButton ("Senior");
radioButtonPanel.add (seniorRadioButton);
centerBottomPanel.add (radioButtonPanel);
centerPanel.add (centerBottomPanel, BorderLayout.SOUTH);
contentPane.add (centerPanel, BorderLayout.CENTER);
//creation of button group deleted
//buttonPanel will contain buttons and will be placed at south side
//of the frame
JPanel buttonPanel = new JPanel(new GridLayout (1, 2, 5, 5));
JButton submitButton = new JButton ("Submit");
buttonPanel.add (submitButton);
JButton exitButton = new JButton ("Exit");
buttonPanel.add (exitButton);
contentPane.add (buttonPanel, BorderLayout.SOUTH);
}//end main
}I do have the 1.5 at the moment and I still get the same error. I have removed other instances of JRE from my computer and retried but it still persists... What else can I do?
Java Newbie -
DTW 2007B PL:7 - DTW always showing run time error on record key no. 1377
Hi,
I've encountered a strange problem while transferring Customer Master.
Firstly, the DTW throws error randomly asking for 'Ship To' Address along with given 'Bill To' Address.
Also, at Record Key No. 1377, DTW shows run time error & asks for debugging.
Once the debugging is started, it goes on & on with any probable end of debugging.
And if the debugging option is not chosen DTW crashes & the corresponding error file is blank.
If anyone had encountered similar problem, pls respond ASAP.
Thanks,
PrashantHi Kapil,
did you use a template for importing the BPMaster and BPAddress data ? Such error normally causes by wrong LineNum and wrong signs for type of addresses.
Please reffer to SAP note 899093 and 979116. This would be helpful.
Regards Steffen
PS. templates are located in <program folder>\SAP\Data Transfer...\Template\Template\oBusinessPartners -
Getting run time error while calling smartform
hi,
i am getting run time error of "maintain output device in your master data" while calling smart form.
p_output_options-xsfcmode = 'X' .
p_output_options-xsf = space .
p_output_options-xdfcmode = 'X' .
p_output_options-xdf = space .
p_output_options-tddest = 'LP01'.
p_output_options-tdnewid = 'X'.
p_output_options-tddelete = SPACE.
p_control_parameters-no_dialog = 'X' .
p_control_parameters-getotf = 'X' .
p_control_parameters-DEVICE = 'PRINTER'.Hi Neha
Your program looks out for the default printer configured against your user (Check SU01 : Constant tab ). You dont seem to have maintained it properly as a result of which you get this message. You will have to configure your printer device to overcome this error.
Choose menu: System -> User Profile -> Own data.
On the Defaults tab, give LOCL code for the output device.
You can also check the output device setting in transaction SPAD.
Regards,
Uday -
Herarchial alv gives run time error
Hello experts
this is chitta ranjan mahato new to sap abap try to write a herarchial alv but it gives run time error my code is as follows.
thnaks in advance
REPORT ZCR_TEST_004.
TYPE-POOLS: SLIS.
TABLES: VBAK,VBAP.
TYPES : BEGIN OF TY_VBAK,
VBELN TYPE VBAK-VBELN,
ERDAT TYPE VBAK-ERDAT,
ERZET TYPE VBAK-ERZET,
ERNAM TYPE VBAK-ERNAM,
ANGDT TYPE VBAK-ANGDT,
EXPAND TYPE XFELD,
END OF TY_VBAK.
TYPES : BEGIN OF TY_VBAP,
VBELN TYPE VBAP-VBELN,
POSNR TYPE VBAP-POSNR,
MATNR TYPE VBAP-MATNR,
MATWA TYPE VBAP-MATWA,
END OF TY_VBAP.
DATA : IT_VBAK TYPE TABLE OF TY_VBAK,
WA_VBAK TYPE TY_VBAK.
DATA : IT_VBAP TYPE TABLE OF TY_VBAP,
WA_VBAP TYPE TY_VBAP.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA : WA_KEYINFO TYPE SLIS_KEYINFO_ALV.
DATA : I_PROGRAM TYPE SY-REPID.
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
PARAMETERS: P_VBELN TYPE VBAK-VBELN.
SELECTION-SCREEN: SKIP.
PARAMETERS:P_EXPAND AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK B1.
start-of-selection.
PERFORM SELECT_DATA.
PERFORM BUILD_LAYOUT.
PERFORM BULID_FIELDCATLOG.
PERFORM SHOW_DATA.
FORM SELECT_DATA .
SELECT VBELN
ERDAT
ERZET
ERNAM
ANGDT
INTO TABLE IT_VBAK FROM VBAK WHERE VBELN = P_VBELN .
IF NOT IT_VBAK IS INITIAL.
SELECT VBELN
POSNR
MATNR
MATWA
FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
FOR ALL ENTRIES IN IT_VBAK
WHERE VBELN = IT_VBAK-VBELN.
ENDIF.
ENDFORM. " SELECT_DATA
Edited by: chitto123 on Oct 11, 2010 7:11 PMFORM BUILD_LAYOUT .
IF P_EXPAND = 'X'.
IT_LAYOUT-expand_fieldname = 'X'.
ENDIF.
WA_KEYINFO-HEADER01 = 'VBAK'.
WA_KEYINFO-ITEM01 = 'VBAP'.
ENDFORM. " BUILD_LAYOUT
FORM BULID_FIELDCATLOG .
WA_FIELDCAT-col_pos = '1'.
WA_FIELDCAT-fieldname = 'VBELN'.
WA_FIELDCAT-tabname = 'VBAK'.
WA_FIELDCAT-seltext_m = 'SALES DOCUMENT'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '2'.
WA_FIELDCAT-fieldname = 'ERDAT'.
WA_FIELDCAT-tabname = 'VBAK'.
WA_FIELDCAT-seltext_m = 'RECORD CREATION DATE'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '3'.
WA_FIELDCAT-fieldname = 'ERZET'.
WA_FIELDCAT-tabname = 'VBAK'.
WA_FIELDCAT-seltext_m = 'ENTRY TIME'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '4'.
WA_FIELDCAT-fieldname = 'ERNAM'.
WA_FIELDCAT-tabname = 'VBAK'.
WA_FIELDCAT-seltext_m = 'PERSON CREATED'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '5'.
WA_FIELDCAT-fieldname = 'ANGDT'.
WA_FIELDCAT-tabname = 'VBAK'.
WA_FIELDCAT-seltext_m = 'QUOTATION FORM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '6'.
WA_FIELDCAT-fieldname = 'VBELN'.
WA_FIELDCAT-tabname = 'VBAP'.
WA_FIELDCAT-seltext_m = 'SALES DOCUMENT'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '7'.
WA_FIELDCAT-fieldname = 'POSNR'.
WA_FIELDCAT-tabname = 'VBAP'.
WA_FIELDCAT-seltext_m = 'SALES DOCUMENT ITEM'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '8'.
WA_FIELDCAT-fieldname = 'MATNR'.
WA_FIELDCAT-tabname = 'VBAP'.
WA_FIELDCAT-seltext_m = 'MATERIAL NO'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-col_pos = '9'.
WA_FIELDCAT-fieldname = 'MATWA'.
WA_FIELDCAT-tabname = 'VBAP'.
WA_FIELDCAT-seltext_m = 'MATERIAL ENTERED'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. " BULID_FIELDCATLOG
FORM SHOW_DATA .
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = I_PROGRAM
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
IS_LAYOUT = IT_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_DEFAULT = 'X'
* I_SAVE = ' '
* IS_VARIANT =
* IT_EVENTS =
* IT_EVENT_EXIT =
I_TABNAME_HEADER = 'VBAK'
I_TABNAME_ITEM = 'VBAP'
* I_STRUCTURE_NAME_HEADER =
* I_STRUCTURE_NAME_ITEM =
IS_KEYINFO = WA_KEYINFO
* IS_PRINT =
* IS_REPREP_ID =
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB_HEADER = IT_VBAK
T_OUTTAB_ITEM = IT_VBAP
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " SHOW_DATA -
Run-time error for the chart - TBUtilities
Hello,
I'm trying to create a report template with the BI Publisher desktop plugin. The load of the xml file, the Table creation and PDF export work fine. When I want to add a chart to the template (Insert -> Chart...), I have a Microsoft Visual Basic Error:
Run-Time error '-2147024894(80070002)':
File or assembly name TBUtilities, or one of its dependencies, was not found.
I use Word 2000 (9.0.8950 - SP3), .Net framework 2.0 and Java JRE 1.5.0_05.
I checked the other topic about this type of error but I didn't find any solutions...
Is there a patch to fix this error ???
ThanksHas anybody got an answer for this one, as it has just happened to me
Gus
Maybe you are looking for
-
Image with foreign characters in name won't display
I have an image on my drive whose name has foreign characters ("c�pia de frente.jpg"). To display the image my JSP reads the image name from the database and generates the following html: <img src="../pictures/c�pia de frente.jpg">The page then displ
-
Remote Desktop Connection (RDC) iMac to PC server with fixed IP
I have setup my first imac and as part of this process downloaded Remote Desktop Connection for macs so that I can log onto my server at work. Problem is when I attempt to connect to my remote pc the following message appears "Remote Desktop Connecti
-
Planned order to PR conversion in MD04
Hi Gurus, We see planned orders in MD04 for a material. Please explain me how and when the system will convert this planned order to PR. The material is externally procured. please exaplain me about the MRP elements and and their relationship in MD04
-
Help - this is dumb.
-
Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D I checked in RSA2 (data source repository in BI) and it exits. Now that