Asset master data no "Expired useful life".
Hi expert.
Today our user tell me ,system need her that to enter the filed (ANLC-NDABJ/NDABP) of * expired useful life in year /period * in depreciation area tab . otherwise not allow to save the data.
And i found, all of asset capitalized period on 2011.12 and the start depreciation period on :2012.01 ,the Expired useful life year/period is null and requirement to input the value.
when we enrty the expired useful period.
Expired useful life 000 000 calculated by system (Check)
Message no. AA910
My question:
What's reason and how to fix it ?
Thanks,
Regards,Alex
Hi,
Usually Expired life will be displayed in Asset master once the acquisition. If your capitalization date is in the previous fiscal year (in your case: 2011.12) and in the next period you will able to see asset expired period as 01 period(assume next fiscal year is starting from 2012-01).
I guess you should maintain your capitalization and ordinary depreciation date one and the same
Similar Messages
-
Useful life is asking mandatory field in asset master data
while asset master creation useful life is asking mandatory field in dep.key : ZSLU. actually i have to give "ZERO" in useful life field. i have set screen layout in AO21 also.again asking mandatory field. I got the one point, I think this is the problem,
Note: Base method 0011 (Ordinary: percentage from useful life) already assigned in dep. Key ZSLU. If we assigned in dep. key ZSLU, we should give positive values for useful life in asset master data.
I changed base method 0002 instead of 0011, it was accepted, If i change base method(0011),
i want base method instead of 0011?
which base method i have to give? please give suggestion?
Thanks
induHi ,
i have changed optional field also. it's asking mandatory, i have tested base method 0002 instead of 0011. if i give 0002 or other base method, it is accepting.
Note: if we mention base method 0011, we must give passitive values in useful life.
what i have to do? please tell me? -
Function module to read the expired useful life of asset
Hi,
Is there a function module to read the expired useful life of asset. We are using the depriciation start date to calculate the expired useful life of asset, but the fiscal year shift and matching the calendar year with fiscal is causing the logic to give a month difference between the calculated value and the value in the asset.
Please let me know if there is a Function module or BAPI for getting the values. Kindly provide example for the function module call too.
Regards,
Prabaharan.GHi,
Check the following function modules.
AISC_CALC_EXPIRED_USEFUL_LIFE.
Check the following link it might be of some help to you.
Re: asset useful life
Regards,
Ram. -
How to include depreciation are in asset master data
I have already activated depreciation area in the asset class but it did not appear inn asset master data.
How to include it there?
Tks,
NaejHi,
There are 2 aspect which you need to consider.
1) For exisiting asset as used AFBN as suggested by Srinivasa to activate the depreciation area.
2) For new asset OAYZ configuation would populate the dep key and life.
Thanks
Vaibhav
Edited by: vaibhav patil on Apr 22, 2010 10:40 PM -
Fixed asset Master Data import
Please can anyone help me resolve this error messages when importing Fixed asset master data
"Net book value of asset must be greater or equals to zero"
Am using SAP Business one version 9.0 pl9Hi Bright,
Please check below link.
Error message during Import of Fixed Assets after Upgrade of SAP 9.0 to PL10
Hope this help
Regards::::
Atul Chakraborty -
DI API to import fixed asset master data and acquisition.
Hi,
Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
Have been used to add fixed assets, and would like to perform using the API to import fixed asset master data and acquisition.
The commands to access the table of fixed assets related to the API that is available?
Thanks.I have the same problem...
Is there anyone who have tried these things? -
Modify fixed asset master data thru migo
Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
RubenHi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne -
How to activate fields under origin tab in the asset master data
Hello Gururs,
While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new. 2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
regds
RamachandraHello Markus ,
Thanks for your reply. I checked through Group box info then system is showing the following message .
status - DISPLAY
Reason - Authorization for asset view used
In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
regds
ramachandra -
Custom Field in Asset Master Data
Dear Experts,
I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
I'm using a new installed SAP GUI 7.3 .
The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
Thank you.Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George -
Changes of asset master data - S_ALR_87012037
Hi Colleagues,
Could please help me by settings in order to see changes of asset master data ?
I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
is there any another option to get request display of data ?
Thanks a lot for your responseHI Gora,
Standard report is the best option, but you can also use Table CDPOS:
S_ALR_87012037 Output:
You can also use Table CDPOS/CDHDR, in se16n.
Regards
Javed -
User Exit - Create Asset Master Data from MIGO
Hi Experts,
I want to create an asset master data from Good Receipt Purchase Order, when the user saves the document, but I didn't find none user exit, BADI or BAPI that I can use.
Cuold you help me?
Thank a lot.
Kind Regards
GiampaoloHi,
Why you want to create the Asset master at the time of MIGO.
Posting MIGO is end user activities and Creation of Asset is of Super User, he have to assign cost center plant etc in master which will not be known by the end user and can create lot of problem in later stage.
If we create Asset it MIGO or PO level how user know that he have to post to new asset or to existing asset. This decision is of Finance person.
If it is that important in your business process then give the authorization of Asset Master data creation to User.
I personally feel this requirement is not feasible.
Regards,
Shayam -
How to display field Functional Location Field in Asset Master Data
Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
FransDear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard -
Validation user exit at asset master data
hi all,
at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
Regards,
RobHope the below user exits are useful:
AAPM0001 |Integration of asset accounting and plant maintenance
AINT0001 |Extended checks when posting an asset
AIST0002 |Customer fields in asset master
Pls assign points as wa to say thanks -
Add field group to Asset Master Data Screen Layout
Hi Gurus !!
Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
Thanks a lot,
SashaI don't think you can add a funds center to the Time dependent tab.
Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center. -
Asset master data synchronization with HR Master data
Dear Experts:
I am FI consultant and i am doing Research on Synchronization of asset master data with HR master data. Our management wants that if company gives any thing which is regarded as an asset e.g Laptop, expensive tools e.t.c to its employee then beside opening its asset master data in FI it should also be updated in HR Employee master data. For this from FI side there are 3 asset classes for which we want that if any asset is opened in these classes then the data should be updated in HR. I have turned on Personnel number in screen layouts and have fetched this field in asset reports. We want
1...Asset Description
2...Cost Center
to be updated in HR master data. Now my question is that how this can be achieved. Is it possible? What configuration will need to be done for it.
RegardsHi
FOr assets created in FI and reflect them in HR use the feature ANLAC and it will take care.
This feature determines whether or not the system checks the fields Asset number in infotype 0040 (Internal Control) and Loan object number in infotype 0040 (Objects on Loan) against database ANLA.
R K
Maybe you are looking for
-
Please help!! photo in wineglass in Photoshop elements 9
I am new to photoshop (or any other editing for that matter). I would love to make a picture effect of a photo in a wine glass and am about to pull my hair out trying to figure this out. I have found some instructions on the internet but am having a
-
Need some sample for parameters in used in default Reports of SCOM
Hi , I am running Performance report for 2008 Servers from the Reporting Server Link (http:\\reportserver\reports), instead of SCOM console. I see below fields for which there are no documentation and i am not sure what data to provide in those , and
-
Theme Editor, changing size of all elements
Hi all, I'd like to enlarge the font size of all elements in my WebDynpro ABAP application. I made a copy of sap_tradeshow in the stand-alone Theme Editor and set the parameter "Base Font Size" for "Text" in "Global Styles Content Area" to xx-large.
-
I'm trying to update my phone to ios5 but it say that i have network error
i was trying to update my phone to the ios5 but it say that i have a network error
-
LV 8.5 just released - the list of most important features
It seems LabVIEW 8.5 has just been released. I went trough the upgrade notes and listed the most important new features for LabVIEW power users in my ExpressionFlow blog. Read the blog post... Tomi Tomi Maila