Asset master uplode
Hi can any one tell me the Asset Master Uplode throw LSMW step by step this id deleted
Thanks & regards
Kumar
Delhi
better use longtext than modifying sap-standard
A.
Similar Messages
-
Error while creating asset master on a new company code
Hi there,
While trying to create a new asset master - Asset class XXX cannot be used in company code XXXX
Message no. AA130
Diagnosis
When you create an asset, the system determines the chart of
depreciation from the company code definition. In order for a chart of
depreciation to be available for an asset class during asset
maintenance, the chart of depreciation has to be entered for that asset
class (Determine class valuation). Chart of depreciation YYYY that was
determined is not entered for asset class 123
System Response
You cannot create any assets in your company code for this class.
Please revert if you have any details regarding this. I am sure I am getting this error because of a missing entry in v_ankbv. But i am not sure on what is the config step i m missing.
Thanks,You need to configure the node 'Determine Depreciation Areas in the Asset Class' T Code-OAYZ.
Path : Financial Accounting (New) > Asset Accounting > Valuation > Determine Depreciation Areas in the Asset Class.
Assuming you have already done the other prior config steps involved like., Assign Chart of Depreciation to Company Code, Asset Classes etc.,
You can also refer to the Best Practices Configuration guide (Link Below) for further details:
http://help.sap.com/bp_bblibrary/600/html/N72_EN_DE.htm
Regards
Sreenivas
Pls close the post if satisfied. -
Dear All
A very good morning.
My problem is that when I create the asset master through AS0, in the Depreciation Area tab all the fields viz.Book depreciation, dummy 1 etc appear in white ie they are changeable by the user.
I want to select a sreen layout in which these fields turn grey & cannot be changed by the user.
Can you please help me on this.
Thanks
Saurabh BagriHi Pushkaraj,
Thnx for ur reply.
In the screen layout, the depreciation key is specified to be a madantory one with no check box for display.What should be done in such a case.
More so when i try to come out of this screen the system gives a message "Specify maintanence level" & dosnt allows me to quit. Can you explain this to me .
Regards,
Saurabh Bagri -
Fixed asset Master Data import
Please can anyone help me resolve this error messages when importing Fixed asset master data
"Net book value of asset must be greater or equals to zero"
Am using SAP Business one version 9.0 pl9Hi Bright,
Please check below link.
Error message during Import of Fixed Assets after Upgrade of SAP 9.0 to PL10
Hope this help
Regards::::
Atul Chakraborty -
DI API to import fixed asset master data and acquisition.
Hi,
Environment : SAP B1 8.8 PL18 & Fixed Assets Add-on 880.236.00.18
Have been used to add fixed assets, and would like to perform using the API to import fixed asset master data and acquisition.
The commands to access the table of fixed assets related to the API that is available?
Thanks.I have the same problem...
Is there anyone who have tried these things? -
How to import Fixed Asset Master File
Hi all expert,
I used BAMasterDataImportFile to import the Fixed Asset. But the message as below appear :
"Import end;Number of successfully imported assets: 0;Number of processed assets:2"
After complete import the fixed asset master files still empty. May i know anybody can advise me for import fixed asset files?
Thank for help.
From:
Eric TanHi Eric,
Please refer your error with the possible reasons below (from SAP notes):
Error message: "Import End; Number of imported assets:0; Number of processed asset:2"
Reason: Note that there is no error. It is usually because of the conflict of Depr. Start Date , Use Life and Remaining Life.
The following is a list of possible errors:
1. Fixed Asset in Production Mode -- Make sure Fixed Asset is in Transfer mode before importing.
2. The number of semicolons for each line is not 66 -- For each line, each field must be separated by a semicolon(, the number of separators( should be 66. Number( = 66.
3. Wrong Date Format DD-MM-YYYY or MM-DD-YYYY -- The correct date formats should be : YYYYMMDD, YYYY-MM-DD, YYYY.MM.DD or YYYY/MM/DD
4. Asset Class unavailable -- The asset class in your csv file does not exist in Fixed Assets; make sure the used asset classes are defined in Fixed Assets before importing.
5. Depr. Type unavailable -- The given depreciation type does not exist in Fixed Assets, make sure the used depreciation type is defined in Fixed Assets before importing.
6. Depr. Area unavailable -- You entered data for a depreciation area that does not exist. If there are only 2 depreciation areas in Fixed Assets do not enter data for area 3 or 4.
7. Depr. Area is inactive for asset class -- You entered data in the csv file for an area that is not active for the given class in Fixed Assets.
8. Life parameter is negative or the remaining life is greater than planned life -- All life parameters should be positive, the remaining life should be less than the planned life
Life Parameters(Depr. Start Date, Useful Life and Remaining Life) are mathematically incorrect for one of the areas in csv. Remaining life = Useful life - (the difference between the first date of import year and depreciation start date). Note that it is not the difference between import date(the date you import Fixed Asset Master Data) and depreciation start date. You must calculate the remaining life correctly. For example, you want to import an asset in 2005, you import it on 2005-09-01 ,then the first date of the import year is 2005-01-01, Depr. Start Date = 2003-06-01, Useful Life = 60 months, then
Remaining Life = 60 - (2005-01-01 - 2003-06-01) = 60 - 19 = 41 months.
The following calculation is wrong:
Remaining Life = 60 - (2005-09-01 - 2003-06-01) = 60 - 27 = 33 months
Import Fixed Asset for the current fiscal year -- The fixed asset master data import function is designed for legacy data importing. We recommend you to import fixed asset master in the past years. If you insist on importing an asset for the current fiscal year, make sure the depreciation start date is the first date of current fiscal year and the Remaining Life is the same as the Useful Life.
Year Values -- the sum of the accumulated depreciation (planned, unplanned and special depreciation) in the csv file is greater than the acquistion and production costs.
Also, don't forget to change the fixed asset mode to transfer. Administration>System initialization>Company Details> Basic initialization tab.
Hope this helps.
Rogelio Elicor Jr. -
Import fixed asset master data
When I try to import fixed asset master data from an excel file to the Sap Business, a problem that I cannot identify occurs, and as a result, data is not imported. The process runs normally, data is processed but at the end an informational message says that zero data was imported. I would like to have help on this to solve this issue.
Hi all
Message was edited by: JEAN PIERRE LANCEAU
Problem resolved : see the addon logfile in %temp%/sap business one logs/addonlog.txt to show errors -
Getting Segment in the Asset Master ( Using SEGMENT Badi and not Prt Ctrs)
Hi,
We need the field Segment to be populated in the Asset Master to get the correct P&L Statements ( The depreciation run, retirements etc to post to the Segments) . We are using the segment Badi: FAGL_DERIVE_SEGMENT to derive Segments and NOT the Profit Centers
However, the field Segment missing in Asset Master (Class). The field segment is missing the Time Dependent view while creating the Asset Master Data. This is so because in the Configuration of Asset Accounting --> Integration with GL --> Additional Account
Assignment Objects is not showing the Segment field.
According to SAP help, I CAN DO THIS as mentioned
http://help.sap.com/erp2005_ehp_05/helpdata/en/94/f13167dbae436a85a4a1d3ad75f274/frameset.htm
But, as mentioned in the SAP help link above, I am not able to find " Activate segment reporting in
Customizing for Asset Accounting under Integration with General
Ledger --> Accounting Segment Reporting --> Activate Segment Reporting"
Also, from another SAP Help link
http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/fb/84a48d665e4fa9a2dc7b60adeb7c7d/frameset.htm
I found that activation of Business Function FIN_GL_REORG_1
or FIN_REP_SIMPL_3 could also get us the Segment Field in the Asset
Master Data's Time Dependent Field
However, when I goto Transaction SFW5 - Change Business Function Statuswe are not able to find these Business Functions (FIN_GL_REORG_1
or FIN_REP_SIMPL_3 )
Regards
KSHi, Activate segment reporting is available only in EHP5.
If you'renot using EHP5, then you can't to update segment as well as profit center in asset master data.
The only way is to put co objects in asset master data, and derive PC,segment based on this co objects -
Hi
I have an issue in which the Dep start date for Dep area tab for a particular dep area 15 is shown in display mode for asset master. How can i make it modifiable
Regards
Sanil BhandariHello Sanil,
Please check this SAP doc. Keep me posted.
Period Control Method
Use
For determining the depreciation start and end date for asset transactions, you can set an appropriate period control in the period control method for the four transaction categories:
Acquisitions
Subsequent acquisitions/post-capitalization
Intracompany transfers
Retirements
This enables you to set the depreciation start date for all acquisitions within the same year to the beginning of the year, for example. You can also set the depreciation start date for retirements to the first or last day of each period. Using the asset value date of a transaction (acquisition or retirement), the system determines the start date or end date of depreciation calculation using the period control.
Features
Standard Period Control
When you set up an asset company code, the system automatically generates period control rules. The most important of these include:
Pro rata at period start date
Depreciation start/end is always at the beginning of the period in which the acquisition or retirement takes place.
Pro rata upto mid-period per period start date
For transactions up to the middle of the period, the depreciation start or end date is dated from the beginning of the period. Transactions after mid-period, however, are dated from the beginning of the next period.
Pro rata at mid-period
This rule corresponds to the first rule. However it is intended for depreciation calculation based on half periods.
First year convention of a half year
(See example.)
Year start date/mid-year/year-end
For transactions on the first day of a fiscal year, the system calculates a whole year's depreciation, for transactions up to the middle of the year, half a year's depreciation and for transactions after mid-year, no depreciation.
At the start of the year
At mid-year
At the end of the year (start in the following year)
At mid-quarter
(see the "pro rata at mid-period" rule)
At the first quarter
At the following quarter/following month
At the following half-year
Transactions up to the middle of the fiscal year have a depreciation start date on the middle of the year. Transactions after the middle of the fiscal year have a depreciation start date in the following year.
When you specify the fiscal year variant for the company code, the system automatically assigns calendar dates to the posting periods for these period control rules. However, the fiscal year variant has to be set up with either 12 or 24 posting periods.
You can modify these standard rules yourself, allowing you to flexibly define the relationship between the calendar date and the posting periods.
First year convention:
To 06/30
depreciation start date/end in period 0
From 06/30 to 12/31
depreciation start date/end in period 6
The system interprets period 0 as the start of the fiscal year (January 1), not period 1. Period 6 represents July 1.
Half-Periods
The number of posting periods in Asset Accounting generally corresponds to the number of posting periods in Financial Accounting. You can, however, double the number of depreciation periods if the basic number of posting periods corresponds to the number of calendar months (12). By setting a control indicator when defining the company code, you can specify the use of half-periods. By specifying the calendar date, on which the second half of a period begins (for example the 16th of the month) you can have the depreciation calculation start and end at the middle of a period. For more information, see Mid-Quarter Convention (USA) .
In order to use this option, you have to set a special indicator in the allocation rules of the period controls.
It is not possible to use half periods when you are using non-calendar fiscal months.
Variable Period Control
Using an indicator when defining the individual depreciation keys, you can specify that a key does not use the period control of its assigned period control method. Instead it uses period controls you define for the company code and fiscal year.
This may be necessary, for example, when depreciating according to US law, if you only apply the mid-quarter convention to acquisitions in specific company codes or fiscal years.
If you change the period control of assets, in which the depreciation start date was already set, you have to then change their depreciation start date manually.
The above doc is from below link.
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71dde0448011d189f00000e81ddfac/frameset.htm
reg
assign points if useful -
About settlement, asset master data's amount column value
Dear Experts,
I build an aseet master data : A (the amount column's value is 0 in asset master data)
Then, I build an asset purchase order assign to A , after I do GR, A's amount column's value change to 1.
But if as follows,
I build two asset master data : B and C ,
B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
I do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
but the asset value certainly has transfer from B to C......
why B's amount column's value doesn't be changed?
I can't figured out.
Thanks a lot in advance.
Best Regards,
Yacoa
Edited by: Yacoa Chen on Mar 15, 2011 9:14 AMHi
If B is still showing value - It means values are not settled
After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
Br, Ajay M -
About Create Asset Master Record
hi expert,
when use the tcode as01 to create an asset master record.
there is a location filed and the location relative to an address number .
my concerns that how can we maitian the address number or do we just pick
one from the table adrc?
thanks in advanceHi,
Check whether the asset class is locked in for your depreciation area in T Code AM05. If so, remove the lock.
Regards,
A.Saravanan. -
Depriciation key and useful life periods in asset master should in display mode only
Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek -
Equipment master record updation in Asset master record
Dear Friends,
I have a query with regard to Equipment master record updation in asset master record. Here we have created equipment in Plant maintenance module and we have created asset in AS01 tcode. When we give the asset number to PM module guys, they can easily update the asset number in their equipment master by changing the equipment master record.
But when we enter the same in asset master record in 3rd tab allocations tab, initially it is accepting the equipment details like equipment number, category, object and tech description, but the same is not available after saving.
Please let me know whether I have to do any customization in asset settings inorder to get the equipment number populated in asset master record.
Thanks,
Dwarak.Hi,
Thanks a lot for your reply.
I did both these customization, but still it is not working. Any other customization to be done? Please let me know.
And also in asset master record in allocations tab, do we need to select sync and workflow checkbox?
Thanks
Dwarak. -
Vendor name in Asset Master Table
Hi all,
If i open any asset master with Tcode AS02, i am able to see the vendor code and vendor name in the origin tab in the asset master.
And the fileds filled in asset master will be stored in table called ANLA, when i open the said table for the respective asset, there i am able to see only the vendor code only not the vendor name field.
the vendor name field ANLA-LIEFE was showing blank, as it was showing data in the asset master.
I think there might a technical issue in this regard.
Please suggest me to fix this bug.
Thanks,
SrinuHi
It is not a bug,
This field is currently for informational purposes only.
You can only use this field to define sort versions.
SAP-Definition of Sort version."A means of defining groups and group totals in asset reports. All fields of the asset master record can be used as group and/or sort criteria for defining a sort version. You enter the sort version key when starting a report."
regards -
Error in Asset Master record creation
I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
I have filled all account determination, screenlayout, etc.
When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
Error shown is:
Chart of depreciation IN00 that was determined is not entered for asset class 3001.
_How to rectify the problem ?_
Help with Tcode or menu path.
Further to rectify,
I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
But error shown is:
Chart-of-depreciation-dependent assignment to asset class not possible
(Message no. AC012)
Solution given is:
In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
1. Defined at least two active charts of depreciation
2. Assigned asset class 1001 to more than one chart of depreciation
However, at the moment this asset class is only assigned to chart of depreciation 1.
I m unable to understand the solution
Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM
Maybe you are looking for
-
GRC AC 10.0 - Customize Menu
Hello! Does anyone know if there is any documentation how to customize the GRC AC Menu? I have achieved to create a launchpad called "Special Transactions" next to the standard launchpads "MyHome", "Setup", "Access Management" and "Reports and Analyt
-
Need Total of a Measure Constantly without aggregation
Hallo Experts, I Need to show Total of a Measure Constantly without aggregation in Webi in one column. The requirement is to show following Supplier Name No. Deliveries Total Deliveries A 1 43 B 2 43 C 2 43 D 4 43 E 3 43 F 6 43 G 0 43 H 8 43 I 6 43 J
-
2 select in Package???
I need to get 2 tables from on package? I need to add this sql to the package.. SELECT distinct FeatureType FROM Common.V_Keyword where upper(Keyword) like '%' || isearchVal || '%' order by FeatureType Here is the package: AS TYPE t_cursor IS REF CUR
-
Panasonic FZ30 and LX1 RAW files with iPhoto 6?
I can't get an answer anywhere on this one so far, including from Apple. Can I download RAW files from a Panasonic FZ30 and LX1 using iPhoto 6? The list of supported cameras doesn't include either camera but does include the LC1. Have any of you had
-
Hi people, I was wondering if the difference between the macbook pro 15" i7 and the retina one is toomuch, because I´m gonna buy a new one and in order to make my budget, bieng specific is because I work with photoshop, ilustrator an indesign all day