Asset No. of the scrapped asset not appearing in the GL Line item display

Hi Friends,
As a part of the year end process the users have written of some of the assets thru T Code "ABAVN" - Asset Scrapping without revenue. The losses arising were posted to the particular GL Account as was defined in the config. However, when viewing the GL line item display we are not able to see the Asset No. against each of the line representing the loss arising from the scrapping of the asset. We tried changing the layout but still the asset no. does not get populated in the Asset column. Would need the help of freinds as to how can we change the settings so that against line item in GL we are able to see the Asset No. as well.
Thanks!
Regards,

Haven't tried it before but perhaps you could try using asset no. sort keys in the 'retirement loss' gl account.
Think the asset no. appears only on the asset cost and acc.depreciation line items ie. offsetting accounts don't have such.

Similar Messages

  • Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

    Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
    Interestingly they both appear in the System Profiler, but just not working the same as before
    I have tried other USB ports, but the same responce,

    yes I did reset the PRAM, but no benefit, still the same problem
    my usb devices are:  keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
    the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
    here is a cut and paste of the current  "System Profiler>Hardware>USB"   (usb device tree)
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x18
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    Hub in Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x1002
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    HL-1270N series:
      Version:          1.00
      Bus Power (mA):          100
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Brother
      Product ID:          0x0008
      Serial Number:          L9J286292
      Vendor ID:          0x04f9
    Basic Optical Mouse:
      Version:          0.00
      Bus Power (mA):          100
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Microsoft
      Product ID:          0x0084
      Vendor ID:          0x045e
    Apple Pro Keyboard:
      Version:          1.22
      Bus Power (mA):          250
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Mitsumi Electric
      Product ID:          0x0204
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    SuperDisk USB 120MB drive:
      Version:          0.0e
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Imation
      Product ID:          0x0002
      Vendor ID:          0x0718
    USB Bus:
      Host Controller Location:          Built In USB
      Host Controller Driver:          AppleUSBOHCI
      PCI Device ID:          0x0026
      PCI Revision ID:          0x0000
      PCI Vendor ID:          0x106b
      Bus Number:          0x19
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f
    LaCie d2 DVDRW USB:
      Capacity:          451.76 MB
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk2
      Version:          0.00
      Bus Power (mA):          500
      Speed:          Up to 12 Mb/sec
      Manufacturer:          LaCie
      OS9 Drivers:          No
      Product ID:          0x1011
      Serial Number:          FFFFFFFFFFFF
      S.M.A.R.T. status:          Not Supported
      Vendor ID:          0x059f

  • Some contacts appear in the search but not appear in the contacts

    Some contacts appear in the search but not appear in the contacts and same not appear in iCloud. Using iPhone 4 iOS 5.1

    See if either of these help:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_The_list_of
    http://helpx.adobe.com/photoshop-elements/kb/scroll-bar-missing-font-list.html

  • HT204306 my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    my kids enter wronge passwords several times until the ipad says"connect to iTune" but the ipad does not appear on the iTune.I know the correct password.

    You've connected the iPad via cable to your computer, and your computer's iTunes is up-to-date ? If it's icon isn't showing then try one of these troubleshooting pages :
    PC : iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Mac : If you don't see your connected device in iTunes for Mac - Apple Support
    If the iPad is disabled then you'll need to reset the iPad back to factory defaults, after which you can restore to your backup

  • Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is down loading at the app store and when complete, I can not open it or reinstall it.  Help Please   o,

    Recently when I install apps, the icon does not appear on the menu screen, also, it shows that it is downloading at the app store and when complete, I can not open it or reinstall it. Has happened on the last 4 free apps. Help Please

    Reset your iPad. Press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till you iPad starts on it's own. Now try and download an app.

  • After installing an App, the icon does not appear on the desktop?

    After installing an App, the icon does not appear on the desktop? Where would I find it?

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • The device does not appear in the application find my iphone

    The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5

    Try
    iCloud.com from a computer
          Select the Find My iPhone green circle
               Top center select All Devices
    Note is it shows here you can remove it from here too.
    If it's not there it's linked to a different Apple ID

  • Ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    ipod restore failed  can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this

    To get iTunes to see your iPod try:
    - Placing the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Placing it in recovery DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Sometimes this program will get th iPod in recovery mode:
    RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage

  • Why does the airplay symbol not appear on the top left of my imac i bout this computer this august and i bought the apple tv yesterday?? what can i do to make the airplay work??

    why does the airplay symbol not appear on the top left of my imac i bout this computer this august and i bought the apple tv yesterday?? what can i do to make the airplay work??

    Open  > About this Mac and see Version. If it's 10.7.x, read > http://www.apple.com/osx/uptodate

  • PO no not reflecting in GL/ Vendor line item display

    Hi Guys,
    Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

    Hi Amit,
    You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in  Assignment field. What may be the reason and how I get the data (PO no.) in this field?

  • You are not authorized to call up line item display (FB03)

    Hi,
    actually; I am facing a problem; one user is getting error message "You are not authorized to call up line item display" when he is trying to view the payment usage of document no in FB03 transaction code.
    I have checked and found that user is already having display access for the company code which he is putting under company code field.
    Also as per the SU53 screen shot; it is showing
    Authorization check failed for S_CTS_ADMI
    Field - CTS_ADMFCT
    for -  TABL
    I have not run the trace yet..
    Kindly advice on what could be the problem and solution for that...
    Many thanks in advance for your help.
    Regards,
    Anuj

    > Also as per the SU53 screen shot; it is showing
    >
    > Authorization check failed for S_CTS_ADMI
    > Field - CTS_ADMFCT
    > for -  TABL
    Total Questions:      8 (6 unresolved)
    Good match! 

  • Name of the attachment is not appearing in the mail!

    Hi group,
    I am using the FM SO_DOCUMENT_SEND_API1 to send the mail with an XSL attachment, it is working fine but the problem is the name of the XSL attachment is not appearing, please see the below code how i am using
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          document_data              = gi_doc_data
          put_in_outbox              = 'X'
          sender_address             = lv_sender_address
          sender_address_type        = lv_sender_address_type
          commit_work                = 'X'
        IMPORTING
          sent_to_all                = v_sent_all
        TABLES
          packing_list               = gi_packing_list
          contents_bin               = gi_attachment
          contents_txt               = gi_message
          receivers                  = gi_receivers
    I am passing the gi_packing_list-obj_name as XXX_<date>_<Time> and gi_packing_list-format as XLS. After executing the program the mail has been successfully sent and the attachment too, but the name of the attachment is not appearing. it just showing .xls
    Any input regarding this is highly appreciated.
    Thanks in advance

    hi , suresh
    in gi_packing_list
    do like this,
    gi_packing_list-obj_descr = XXX_<date>_<Time> .
    for file name pass parameter in obj_descr.
    Regards,
    Arpit

  • After installing FF 6.02 on Windows 7, the icon does not appear on the desktop and the program does not appear in the All Programs menu

    I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.

    Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

  • I have iTunes ver 10 on a PC with Playlists which do not sync to ITouch or Nano (6th Gen). All the music does not appear and the playlists do not appear at all. I have selected to manually manage music on the sum tab

    I have iTunes ver 10 on a PC with Playlists which do not sync to an Itouch or Nano (6th Gen). Also, all the music does not appear when I check entire library and there is enough memory on the device. When I select to manually manage music on the summary tab and selected playlists on the music tab nothing changes. Either way all the music isn't on either device and the playlists are not on either device. Please advise next steps. Thank you.

    Connect the device to the computer.
    In iTunes, select the content desired to sync.
    Sync.
    This is all described in the User's Guide, reading it may be a good place to start.

  • The firmware was upgraded on my ipod touch 4g and now the artwork does not appear for the various albums. What to do about this?

    After the firmware was upgraded the artwork does not appear on my ipod? How do I fix this?

    Try looking at the previous discussions with your same problem.  Like the ones on the right-hand side of this page under the heading "More Like This".

  • I downloaded a TV/computer program both as an mp3 (audio) and mp4 (A&V).  But the download did not appear in the download drop-down or in itunes.  Does that mean I cannot burn that mp3 or mp4 to a CD or DVD?

    I download a TV/computer program both as an mp3 (audio) and as a mp4 (A&V) I could play them directly using the URLs but neither appeared in the download dropdown or in i tunes.  Does that mean that these files cannot be burned to a CD or DVD?

    I download a TV/computer program both as an mp3 (audio) and as a mp4 (A&V) I could play them directly using the URLs but neither appeared in the download dropdown or in i tunes.  Does that mean that these files cannot be burned to a CD or DVD?

Maybe you are looking for