Asset not in Asset History Sheet

When I run that asset history sheet tcode S_ALR_87011990 for a particular asset with a correct key date, the report produces no results.  When I look at at the asset in AW01N, there are values in the same fiscal year as the key date I ran the AHS for.
Can anybody give me a reason why?
The asset is an AUC and has been marked for deletion.  Is the deleiton flag the reason why?  Can this flag be removed/reversed?
Thanks in advance
This is in R/3 4.70

Hey Steve,
I'm not familiar with the deletion flag, but try to uncheck using transaction AS02. 
If you can't, find out what screen layout rule your AUC asset class is assigned to using transaction OAOA.  Then, see if you can identify the deletion flag field and make it modifiable using the following path in the IMG (transaction SPRO):
Financial Accounting -> Asset Accounting -> Master Data -> Screen Layout -> Define Screen Layout for Asset Master Data
Hope this helps.
Thanks,
Chad

Similar Messages

  • Revaluation values in Asset History Sheet

    Hi,
    I have a doubt about asset history sheet. I dont know how to do to see Revaluation values on Asset History sheet. Is it possible? I'm comparing one asset in AR02 and S_ALR_87012018 (Dep and interest) and the difference is the "Revaluation values". Actually those are not showed in History sheet and it makes it working wrong.
    Is there any functional definitio why it is not showed there? or, is there any possibility to include Revaluation values ?
    I reviewed the History sheet groups and I didn't found anything related torevaluations.
    Thanks a lot for your help.
    Adela.

    Hi
    I have not done it, but you can create a History sheet version in customising.  Copy 1 and add the column.  Also look at a Sort version.  You may want other information there.
    When you run the History Sheet version, select your History sheet version and sort version.  Select ALV format, once the report is run, you can select and deselect columns in layout and then save that layout.  I am sure that using the ALV format it will prove very useful.
    Kind regards
    Dawn

  • Extra-ordinary depreciation is not shown on the Asset History Sheet

    Hi,
    When doing a disposal of assets via transaction ABAVN, the extra-ordinary depreciation is not shown on the asset history sheet in the "Deprec for the year" column.
    How can I show it on the asset history sheet?
    Thank you for your feedback.
    Kind regards,
    Linda

    Hi,
    of course it can. The Asset History sheet output can be defined absolute flexible. Good source of information of how to define asset history sheet versions can be found in the SDN Wiki articles [Asset History Sheet (Detail) |https://wiki.sdn.sap.com/wiki/display/ERPFI/AssetHistorySheet%28Detail%29] and [Asset History Sheet |https://wiki.sdn.sap.com/wiki/display/ERPFI/AssetHistory+Sheet].
    Feel free to create your own history sheet versions according to your needs. But you should avoid to change standard delivered history sheet versions.
    Regards,
    Markus

  • Asset class does not show any results on the asset history sheet

    I have an asset that was acquired on 31.03.10. When I run the asset history sheet for all asset classes, it shows up(under the acquisition column). However, when I run the Asset History Sheet for only that one asset class, there are no results.
    Am I missing some config or is this a bug?
    Fixed Assets addon. SBO 2007A SP0, PL48.
    Financials >Fixed Assets > Asset History Sheet.
    Enter Asset class and Date: March 2010.Click OK.
    The report is empty.

    The problem was the asset class name. The character ' is not allowed and was not recognized by the asset history sheet report.

  • Asset acquisition value is not updating in Asset history sheet & AW01N

    Hi,
    The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
    it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
    I have also checked the below link but still i am persisting the same problem.
    Asset acquisition value not updating
    Regards
    Amit

    Hi Amit,
    check note  366848.
    Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.                                                                               
    At first run the report RACORR110_B. Check the  field ANLC-ANSWL bevor and after running the report.                   
    The report RACORR110_B accumulates the values of the asset line items  and writes the result in the field ANLC-ANSWL.                                                                               
    After this, please start the report RACORR55. This report forwards the  values in the following year.
    (If this is not the reason (ANLC is correct), the report makes nothing.) 
    Regards Bernhard

  • Asset history sheet not picking Aw01n data

    Dear SAP experts,
    Would anybody know any reasons why report S_ALR_87011990 (Depreciation Area 15 - Revaluation) is not bringing expected data?
    Output is showing Zero but if you click in the lines, it will call up AW01N view correctly. Problem is in the output of 87011990 History sheet.
    However, if you run Asset list via S_ALR_87011964, data comes up correclty and if you click in each line, it will also  call up AW01N asset explorer view.
    Any help is welcome
    Thank you

    Hi
    For Reports Goto T.code SAP1
    Anil

  • Asset history sheet version is not complete

    Hi Guru,
    I have implemented a new Asset history sheet version. When I run the Completion check I have the message "Asset history sheet version is not complete".
    This message I see it when I run the transaction code S_ALR_87011990 - Asset History Sheet.
    Do you have any suggestion?
    (I have checked the sap note 658890, but the activity is done.)
    Thanks in advance for all your help.
    Best Regards
    Giampaolo

    Hi Bernhard
    I checked the sap note. The sap note is implemented, but I don't understand becouse when I insert the "." in the Line 02 column 00 position group 50 and in position 75, when I click enter,the system inserts black in automatically. If I insert the "X" in Line 02 column 00 position "50" and "75" the Asset History Sheet is completed.
    Do you know the possible reason?
    Thanks in advance
    Best Regards
    Giampaolo

  • Asset created via AS91 not visible in Asset history sheet

    HI,
    I have transferred an asset from legacy system . Created teh same via AS91. But the same is not visible in Asset History Sheet
    S_ALR_87012048 . Please let me know why.
    Regards
    SR

    Hi SR,
    S_ALR_87012048 is an Asset transaction report which is updated only when transaction like (acquisition, retirement, etc) is performed. Values of this report are fetched from ANEP table.
    For Asset history sheet, you can check S_ALR_87011964.
    Thanks,
    Mayank

  • Asset history sheet (S_ALR_87011990) is not working ok

    Hello,
         I have problems with the asset history sheet (S_ALR_87011990) because it doesen't shows the right amount for the totals. I chose the "Lisst assets or group totals only" check mark and the totals amounts for one asset class are not equal with the same totals of that asset class when I enter in that asset class (when I enter in a asset class I get all the assets from that class and in the end of the page are the totals). These totals should be the same, I doesn't metter if see the assets classes in general or in detail.
         Can somebody how can I modify theis report, or how does this report read these totals. How is this report made?
    Best Regards
    Sorin

    Hi sorin,
    Try S_ALR_87011961.
    Regards,
    Sreekanth....

  • Asset history sheet, assets do not come to a list for a spesific user

    Hi SAP gurus,
    we run AR02 (asset history sheet) report for two users. for one of them, the whole list come to screen however for other user some assets do not come to the list.
    i think this is an authorization issue, but do not find authorization object (probably related with query)
    any suggestions?

    Hi,
    For the second user, for whom you thought that there is an authorisdation issue, ask him to type transaction /nsu53 immidiatly after getting the output.
    Then system will show if there is any authorisatrion issue for his user profile.
    And kindly make sure that, both users are having same authorisation roles in their profiles.
    Thanks,
    Srinu

  • Asset History Sheet S_ALR_87011990 - totals not correct

    Hello,
    When running report S_ALR_87011990, and excluding the advance payments, the report still includes the amount of the advance payments in the total.
    How can this be prevented?
    Thank you.
    Kind regards,
    Linda

    The history sheet referred to the data of 2 years ago.
    Since then, the issue was solved.
    Kind regards,
    Linda

  • Additional field in report S_ALR_87011990 - Asset History Sheet

    Hi
    This is with reference to report S_ALR_87011990 - Asset History Sheet .
    I want to add quantity, location etc in this report.
    can anybody guide me how to add these additional field in this report as in configuration no such option available.
    Regards
    DD

    Hi,
    this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
    That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
    Regards,
    Markus

  • Transaction Type in Asset History Sheet

    Hi Friends,
    After copying the asset history sheet program,
    I added transaction type field (BWASL) to new asset history sheet (z_alr_87011990), but when the report is executed it is not picking the value.
    Can any of you help out in solving this problem.
    Regards

    Did you ever figure out a solution to this problem.  I am having a similar issue and would appreciate some assistance
    Thank You

  • Asset shift factor not updating assets in the asset history list

    Recently we had updated the Asset shift factor for June 2011, but the factor has not been updated in the assets.
    If we check through OA02 then the factor is updated there , but if checked in AS03 after executing and releasing the worklists generated by S_ALR_87011990 then these are not updated and displaying the old factors.
    please guide.

    Hi,
    the asset history sheet shows what is defined in the  "history sheet version"
    -> Tr. OA79.                           
    Here you can define the columns.                                               
    Double click on the column. Here you ca see which history sheet group are assigned. The assigned transaction types are displayed in the asset history sheet.
    History sheet groups you can check in (TABW-GITTGR and TABW-BWASL).  
    regards Bernhard

  • Depreciation Values are apprearing in ASSET HISTORY SHEET Report

    Hi
    We have retired 2 assets during Feb-12 month and values are updated correctly in appropriate Tables & Asset Explorer aswell, but when we are executing Asset History Sheet Via T_Code S_ALR_87011990, depreciation values is not showing in depreciation for the period column (NAFAG) for one asset.
    please let us know what could be problem in extracting the values in the report
    Regards
    Sreenivasulu

    Hi,
    You can run the asset history sheet report with the indicator "Deprecation posted". This will show you the posted depreciation
    (NAFAG).
    Regards,
    Brigitte

Maybe you are looking for

  • Service Module is failed

    when i show service-module ids-sensor 1/0 status i have the following output Service Module is Cisco IDS-Sensor1/0 Service Module supports session via TTY Service Module is failed Service Module status is not available what is the problem and how can

  • BOM Recursive logic

    Hello All, I need a logic for re-cursive call.I am drilling down the BOM components.Example as below. If I have A as header with B as component and again B may have C as component again C may have D and E as components in it. Now if I pass A i should

  • FYI - icon/ logo in address bar

    If you have this question, then the answer is to check out: http://www.favicon.com/ Catching up on reading the forum and I can't even remember now how many times this has been asked just in the space of 1-2 days :-) Nadia Adobe® Community Expert : Dr

  • ABAP : Screen Painter - Graphical layout

    Hi Experts , I am doing an assignment for the screen painter. but when i click on the layout of it , I am not getting the graphical input. kindly advise. is there some new setting to made. thanks & regards , M.S

  • SOS!!!!!......MY PHOTOSHOP DID NOT INSTALL!!!!!!

    I downloaded a trial version of Adobe  Photoshop CS4 Extended however when the installation was complete I clicked on the Adobe Extractor,the installation went to 100percent and on this file ,"AdobeCS4\Extensions\DeviceCentral2LP-fr_CA\DeviceCentral2