Asset number already exists in AS01

Hi all,
I am creating a new asset in AS01. The problem is that I am getting the error saying that the asset number already exists. Typically SAP continues on from the last old number, but now it is restarting from 30000. The number is being generated automatically.
Does anyone have any ideas on how to fix this numbering issue? I have looked in config but have failed to find anything.
Thanks,

Hi.
Run Tcode AS08. Choose company code and click on status. Change the number range to match your current number range.
This issue may be becaue someone might have resetted the number range using the path given above.
Regards

Similar Messages

  • "File with specified name and version number already exists. Result code= -48."   ...????

    Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48."  WHAT IS THE PROBLEM?????? It's making me furious!

    Hi
    As the message says, there is a file at the recording directory that has the same name:
    http://support.apple.com/kb/ht1618
    Try changing the name of the track (this sets the filename in later versions of Logic 9
    CCT

  • "Sequence number already exists in table" maintining Data Sources

    Hi fellows, i am seting up a new connector in GRC 10.0, but when configuring the connector for the User detailed Data sources i get the same error; "Sequence number already exists in table".
    I have tried with over 200 numbers which I know for sure are available and still get the same error. Where can I find the table with this information?
    Can the information be removed to clean up table space?
    Thanks for your help!!!

    Hi Gabriela
    I recall getting this error a lot and it seemed to be a buffering/memory problem where it was remember the old value was getting remember. I had to exit out of the IMG navigation and reenter it again. It'd happen if I deleted one entry and then went to add another (even after saving). Not sure if you are getting this
    Other thing is to check the backed tables to see if any orphaned values on the primary key
    Regards
    Colleen

  • The VAT registration number already exist while extending the CMR

    Hi All,
    We are already having a customer master record for two sales area(one for spain and another one for Netherland). Now we are extending the customer to a new sales area for the country Romania.
    But while extending  the customer we are getting the error message "The VAT registration number already exist".
    Awiting your reply.
    Thanks in advance.
    Sushanta

    Hi,
    Just make sure that your customer  basic country belong to the European Union. You need to select the OTHER Tab of the Vat Registration number . Enter Romania and its respective VAT number.
    Just try this and let me know if it working or Not.
    Regards
    Balachandar

  • Error:  Msg1: This Supplier Number already exists

    Hi All,
    I have created a procedure which search for a vendor and if the vendor or supplier doesn't exist then it will create that Vendor or Supplier using the API AP_VENDOR_PUB_PKG.Create_Vendor. I am using it as an concurrent program. Everything is working fine but I am getting the error
    Msg1: This Supplier Number already exists.
    But the neither the supplier or the Supplier number exits .
    Any Suggestions why I am getting this error. Please reply ASAP as it urgent. By the way I am in the R12 Env. with 11g Database.
    Thanks in Advance
    Edited by: 843564 on Apr 11, 2011 10:05 AM

    Hello,
    This error may be because of the setup of "Payable system Setup" for Supplier Number is "Manual".
    Can you check it @ > Payables > Setup > Options > Payables System Setup
    Vikram

  • HT1349 I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    I have registered my serial number but cannot continue the download because it says that the number already exists. This happened when I previously entered the number bt had to exit the program. How do I resolve this?

    Leigh...
    but cannot do this because I cannot access Mac App Store
    If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
    It's ok to do this even you are already running v10.6.8.
    Plants vs. Zombies, and that is all for additional software on here
    FYI:  Some third party software can cause issues with the App Store >   Mac App Store: Sign in sheet does not appear, or does not accept typed text
    Apple is not responsible for incompatibility isssues with third party software.

  • Need help with Sharepoint foundation web application stuck on "STOPPING" error job-service-instance-GUID Number already exists

    Hi All,
         I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
    I have tried the following:
    reset IIS
    restarted the Timer Service
    When I try to use powershell command to stop I get the following error:
    Can anyone who went through this help PLEASE
    Stop-SPServiceInstance : An object of the type
    Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
    "job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
    under the parent Microsoft.SharePoint.Administration.SPTimerService named
    "SPTimerV4". Rename your object or delete the existing object.
    At line:1 char:127
    + ... pplication"} | Stop-SPServiceInstance
    + ~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
    SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
    ception
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
    iceInstance

    Hi,
    It seems that the issue is in the timer job definition for executing this operation.
    My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
    This might be helpful:
    http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job 
    I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
    As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm. 
    BR,
    Ivan

  • MIRO- Document number already exists on Subsequent Debit/Credit for 3rd pty

    We have problem in invoicing a third party Purchase order, we get the message as " Document -<SD invoice> already assigned".
    Error: F5152
    Our Flow is: SO created-- PO Created--MIGO MIRO VF01.
    Now the Vendor sends a Debit/Credit for the same PO.
    While posting a vendor invoice in MIRO for subsequent Dr/Cr, the system(FI_DOCUMENT_NUMBER_CHECK) checks the number range of already invoiced SD document# and we get the error message " Document -<SD invoice> already assigned".
    I checked the other question posted for this but did not see the solution.
    Nimit

    Please dont cross post in different forums per forum rules.
    As mentioned in the other forum check OSS Note 414742 - Error F5 512 during the billing document update.
    Regards,

  • Error during creating a Vendor:"Vendor Already Exists- Error Message- 2007"

    Hi,
    During creating a Vendor I am facing a problem, I get message as "Vendor XXX(number) Already Exists". I have checked the number ranges for vendor and found that current number in the system for the vendors exceeds the number XXX, mentioned above.
    I dont understand why this is happening.
    Thanks in advance.
    Regards,
    Prasad A. Wathare.

    Go to SE16 , enter the table name as LFA1 .
    Enter the vendor number for which you are getting the error .
    Execute and view the record for which you are getting the error , you will come to know who has created the vendor and when , check the corresponding entry in LFB1 for more details .
    Else , execute the T code FK03 and enter the vendor number and check the vendor details .
    Cheers ,
    Dewang

  • Purchase order already exists error for change Idoc 860

    Hi all
    I am getting an error that purchase order number already exists, when i try to post change inbound IDoc 860. How can I fix this issue?
    Thanks in advance

    This can be b'coz of Check purch.order no is active (A - Check whether the purchase order number already exists) in your sales doc type (TCode VOV8) used for the transaction.
    So, if for your business process, one PO number can be mention in more than one sales orders. Then maintain Check purch.order no should mention as <Blank>  - No Check under your sales doc type used for transaction's General Control. Or else use diff. PO Number.
    Hope this can assist you.
    Thanks & Regards
    JP

  • Inbound IDoc must trigger a workflow if shipment already exists

    Hi friends, my requirement is that:
    I will be getting shipment details via an Inbound IDoc into my SAP system. (IDOC_INPUT_SHPMNT) If the shipment number already exists in the system a workflow error must occur. Also the delivery number in the shipment should be validated for the shipment, if not a workflow notice should generate.
    Could someone please help me in doing this.
    All helpful answers will be appreciated.
    Thank You

    This report might help you
    RSEIDOCM
    Otherwise maybe in ALE customising you could create an event in a user program and use FM SAP_WAPI_START_WORKFLOW to launch your workflow.
    You will have the IDOC message types coming in and the process codes which are executed so you should be able to monitor the process and take whatever action you need during the process..
    (Customising -- use transaction SALE) 
    cheers
    jimbo

  • RFCFILE7: Different Error messages on the same error: BP already exists...

    Hi,
    migrating Business Partners with the RKCFILE7 Direct input program gives 3 different error messages in case that the BP already exists:
    1.  BP & already exists in role BCA010
    2. BP with external number & already exists
    3. Data record to be created is alrady available in table BUT000
    The strange issue is, that migrating same BPs twice the error log gives for each BP one of these 3 error messages.
    However all 3 messages are valid for all BPs (they all exist).
    Any idea?
    Thanks
    Thomas

    does not matter anymore

  • Legacy data transfer for new depreciation area for already existing assets

    Hi all,
    I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
    I like to give Ordinay depreciation posted amount  for the current FY for these assets in AS92, but i find this field is not editable inAS92.
    Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
    Regards,
    Srinivas

    HI,
    I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
    Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
    Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
    Where in AS92, i am able to update Opeing APC Cost and Opeing  Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
    Please guide me how to update posted deprecation for new deprecaition area  in AS92 or some other way for already existing assets.
    REgards,
    Srinivas

  • Asset Number in As01

    Dear Expert,
        Can I generate asset number externally in AS01?
    Please confirm.
    Regards,
    David

    Hi
    Goto AS08 - Select Ext
    Thanks
    P J Anil Kumar

  • Adobe workbench errors on checkin:  Asset already exists / file already exists

    Adobe workbench for Myserver checkin gives errors:  "Could not create the asset because the asset already exists" and/or "File already exists in global store with that name".  How does one fix this? 
    This seems to especially happen when I change login to workbench user/configuration/"mode" etc.

    If worst comes to worst:
    Save relevant directories in completely separate windows backup directory path.
    Remove all sub-folders from LC workbench (everything below the /1.0 leaf).
    Restore directories from backup path.
    This seems to ALWAYS work.

Maybe you are looking for