Asset Off Line Splash Screen burnt to DVD

I had the Red 'asset off line' splash screen burnt to a DVD earlier today, what I had done was accidentally deleted a slideshow folder from my hard disk believing it was unused.
In Encore the slideshow was already built, I assume, and you could preview it and play it in the monitor window. Check project ran without errors as did the Build DVD, but when I went to play the DVD the slideshow soundtrack played ok but the slides were replace by a red 'asset offline' slash screen similar to the one in PP that zoomed in and out on the screen.
My mistake in the first place, I hold my hands up to that one. But shouldn't Encore have warned me about the mistake I was making in some way ?
Kevin

Joe,
No I opened Encore and this project after the slides were deleted,
I had no warnings when I opened the project, or at anytime during the build process.
After I noticed the problem on the DVD, I restored the deleted folder and all was ok from then on.
Kevin

Similar Messages

GXine 0.4.4: How do I turn off the splash screen?

Argh... I know I did this before, in version 0.4.1, but now I can't find the option... :oops: Does anyone know how to turn the damn ugly splash screen off?

gxine -S
for plain xine:
xine --no-splash

Method to build a logo splash screen at the start of the DVD

We are attempting to place a logo splash screen on a DVD. We want the logo screen to be viewed at the beginning, when the disc is first inserted into the DVD player. We want the logo to be seen only one time before the main menu appears, and not seen again while the user navigates around the DVD. Right now our logo screen comes up at the beginning followed by the DVD’s main menu. That’s the first part of what we are trying to accomplish. However, when the “DVD Menu” button on the remote is selected, the disc goes all the way back to the logo splash screen. The viewer has to sit through the logo presentation again before moving on to the main menu. What we want is for the main menu to appear when the menu button is selected on the remote, and not the logo screen. I could not find the answer in the manual. I’m not sure what this process (or menu) with the logo is called for an index search. Commercial movies on DVD have this function. Any ideas?
PowerMac G5 Mac OS X (10.4)
Dual 800 PowerMac G4 Mac OS X (10.2.x)

hey Ralph, also make very sure your connections tab's disc "menu" option is NOT set as the splash scrren.
so what you have to do to see it is:
click on your connections tab. then click on any grey area in your connections window.
then the discs connections will appear on the conection tab.
the 'title menu" connection should be visible, if that says "splash scrren (or whatever you named the splash scrren" change it to "main menu 1" and that should do it.
also, amke sure you follow the above instructions as well!
hope that helps
Mikey

Splash screen on Creme Emulator

Hello,
Attempting to create splash screen on Creme Emulator for Pocket Pc. I'm using JSR-62. I've been able to use this splash screen on J2SE using JDK 1.3. However, in the emulator the frame of the splash screen is shown but the window w/ the image is not shown until the splash screen is being disposed. That is, the Splash screen is a frame that contains a window and the window has the image.
Here's the code I'm using:
import java.awt.event.*;
import java.awt.*;
import java.net.URL;
public final class SplashScreen extends Frame {
private final String fImageId;
private MediaTracker fMediaTracker;
private Image fImage;
public SplashScreen(String aImageId) {
    /* Implementation Note
    * Args.checkForContent is not called here, in an attempt to minimize
    * class loading.
    if ( aImageId == null || aImageId.trim().length() == 0 ){
      throw new IllegalArgumentException("Image Id does not have content.");
    fImageId = aImageId;
public void splash(){
    initImageAndTracker();
    setSize(fImage.getWidth(null), fImage.getHeight(null));
    center();
    fMediaTracker.addImage(fImage, 0);
    try {
      fMediaTracker.waitForID(0);
    catch(InterruptedException ie){
      System.out.println("Cannot track image load.");
    SplashWindow splashWindow = new SplashWindow(this,fImage);
private void initImageAndTracker(){
    fMediaTracker = new MediaTracker(this);
    URL imageURL = SplashScreen.class.getResource(fImageId);
    fImage = Toolkit.getDefaultToolkit().getImage(imageURL);
private void center(){
    Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
    Rectangle frame = getBounds();
    setLocation((screen.width - frame.width)/2, (screen.height - frame.height)/2);
private class SplashWindow extends Window {
    private Image fImage;
    SplashWindow(Frame aParent, Image aImage) {
       super(aParent);
       fImage = aImage;
       setSize(fImage.getWidth(null), fImage.getHeight(null));
       Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();
       Rectangle window = getBounds();
       setLocation((screen.width - window.width) / 2, (screen.height - window.height) / 2);
       setVisible(true);
    public void paint(Graphics graphics) {
      if (fImage != null) {
        graphics.drawImage(fImage,0,0,this);
* Developer test harness shows the splash screen for a fixed length of
* time, without launching the full application.
private static void main(String[] args){
    SplashScreen splashScreen = new SplashScreen("images/StocksMonitor.gif");
    splashScreen.splash();
    try {
      Thread.sleep(2000);
    catch(InterruptedException ex) {
      System.out.println(ex);
    splashScreen.dispose();
//Here is an example of a class which launches an application using the above SplashScreen
public static void main(String args[]) {
fSplashScreen = new SplashScreen("images/MyImage.gif");
fSplashScreen.splash();
try
Thread.sleep(2000);
catch(.....){ }
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
fSplashScreen.dispose()
});So, the frame is shown and then image flashes and go away as the frame is being disposed.
any help is appreciated
Edited by: wrappingduke on Mar 19, 2008 5:49 PM

ANNOUNCEMENT! Our monitor team has considered your request and agrees with you! Future monitors will include the option to turn off the splash screen. Here is how the settings will work....
"Quick Start Mode" :
Is set "On" to speed up the time of the splash display.
                                        On:
Acer Logo shows for 1 sec.
Does not display the Energy Star logo.
                                  Off: (Default)
Normal display. (with both Acer logo and Energy Star logo splash)
Thank you for your suggestion, and to all who commented on the issue as well! Good Thinking, Folks!

Whatdoes it mean when the project I open has a red screen with different languages,media off line?

I finished my movied. and then tried to move everything into a new file labeled TAJE files. Now when I try to open the last version of the movie, I get nothing but 2 of the title clips and then every clip is a red one with different languages saying something about media off line? I deleted old copies but thought that was ok?
Pam

Yes, if you have a completed DVD and just want to copy it then use disk burning software, not PRE. I use Nero and ImgBurn as my main burning applications - Nero is commercial, ImgBurn is free.
If you want to make extra copies over time you would be better to copy the VIDEO_TS folder from your DVD to your Hard Disk and then point ImgBurn at the folder.
For new projects requiring multiple DVDs to be burnt you would be better during Share to burn it to disk. Again, once it's there you can just point ImgBurn at it.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Custom splash screen only shows up when command line is used...

Hi,
Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
Thanks...
My jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="6.0+" href="AcSent.jnlp">
<information>
    <title>AcSent : Commande de repas</title>
    <description>AcSent - Commande de repas</description>
    <vendor>AcSent</vendor>
    <homepage href="http://www.xxx.eu" />
    <icon href="acSentIconBiseau.png" />
    <icon href="splashAcSentRC.png" kind="splash" />
    <shortcut online="true">
      <desktop />
      <menu submenu="AcSent" />
    </shortcut>
</information>
<security>
    <all-permissions />
</security>
<resources>
    <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
    <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
    <jar href="AcSentJnlp.jar" main="true" version="1.0" />
    <property name="jnlp.packEnabled" value="true" />
    <property name="jnlp.versionEnabled" value="true" />
</resources>
<application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
     progress-class="eu.acsent.jnlp.progressindicator.CustomProgress">
</application-desc>
</jnlp>

Hi again,
I made some researches :
- The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
- This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
Thanks again...

HT1369 An update(newer version) was taking place for my iPod touch and I was knocked off line, Now, my iPod won't turn on or off and the screen only shows the Apple insignia and an empty oblong circle where it would have filled when the update was succ

A newer verion update for my iPod touch was taking place when I got knocked off line,Now,I have no connection to be able to use my iPod.Just a Black screen with the Apple insignia and an oblong circle that would have filled when the update was finished appears and the iPod won't turn on or off. What can I do to remedy the situation.?

Try putting the iPad into recovery mode and see if that fixes it : http://support.apple.com/kb/ht4097

LR Off-line DVD Storage - Any Thoughts on How to do

After time passes, I like to move raw files from my hard drive to a DVD. I want to continue to keep these raw files that have been moved to the DVD as part of my LR catalog, including their thumbnail image. This way I can easily locate raw files stored off-line on a DVD. So far my solution is to take all of the files that I will be moving to a DVD, add them to a child-collection called for example DVD-32 (parent collection is called DVDs-RAW Files). I also, select all of the files and add the keyword, in this example 32. Then I copy these files to the DVD-32, delete them from the hard drive. The folder(s) shows as red in the LR library folders. Each files thumbnail is still retained. When I select a file, I know what DVD it is stored on by looking at the keyword. The reason I created the collection of files on a DVD is to provide an easy way to know what files are on a particular DVD. This is a more cumbersome process than what I did using IMatch, which was designed to catalog off-line files. I wonder if there is a simpler way to do this in LR.
Thanks for any thoughts on this.

Also there are some pretty worrying reports about DVD and CD reliability unless you use the Gold Archive disks [that I use, but I no longer archive to DVD or CD].
I now use a grandfather, father, son backup/archive method with grandfather,father in my safe deposit box. When I feel enough changes have been made, I put son in SD box and bring out GF, reformat, check for errors, and do a backup to set the new baseline.
I check my HDs for errors frequently.
I only lost data once, that was when I was replicating deletes and my main HD got corrupted and I transferred those deletes to my backup. I like being able to "look" at my backup/archive files.
People may say that I should still archive to optical media, but to me it is no more safe than my method. I would have to constantly re-read my optical disks to make sure they were not failing.
Also, I expect to pass the 20,000 file mark this year and that is about 25 DVDs [expect 95 GB or so] and making sure they are good looks daunting. Maybe when/if the blue ray technology arrives with appropriate archive/validation s/w I will change my mind.
Meanwhile, I am looking at ads for 500 GB HDs :-)
Mel

How do I connect to computers that are being used in the lab, but have no address listed on the "all computers" screen and say "off line" while they are being used?

Thanks for any help I can get. I'm the new guy here at school, and did not set up the system, so I'm not familiar with any of the individual steps for correcting problems. My question is listed in the window up top.
Jim

Thanks for the response. I tried to find out what you asked. For example:
1. Computer #35 is listed on the "all computers" screen but says "access denied", "not authorized", right click for " get info" has no administrators listed, and I don't know how to add my computer as one.
2. "Scanner" screen # 35 is not listed either in "Bonjour", or "Local Network" (ethernet interface)
3. "Scanner 2" screen - same.
4. "Scanner 3" screen - same.
5. "Computer Lab" screen #35 is listed, but says "off line", "access denied"
I hope this gives us somewhere to start and go from there. Thanks.
Jim

DVD Authoring: How to Make a Menu/Home/Splash Screen

I searched for "DVD menu" and "DVD authoring" but came up empty for what I am trying to do.
I am a newbie to InDesign (CS3), using mostly Premiere Pro. I am a teacher at a High School and for our 4th quarter project we are making a Senior year video. Anyway, one of the groups have the task of designing the cover art, liner notes, DV-disc cover, as well as the menu screens for the DVD itself.
I clearly see that InDesign has some nice templates for most of this stuff, but is this the proper software to be using to create a menu screen to load the chapters, view additional content and things of that sort?
Thanks for the guidance. I'm looking forward to this project but want to make sure I understand the general process first. I'm a quick learner but want to make sure I am studying the right software this weekend!

InDesign is excellent for the printed material, but almost wholly useless for DVD menus. At best, you could create some graphic backgrounds by exporting the layout to JPEG - and that might be an approach to make your printed materials and menus match - but it has no features for creating or editing the menus themselves.
What you want is a DVD authoring tool. There are quite a few around, most of which have flexible titling and menuing functions. Some very limited packages only work with a canned menu; others have some support for user-created menus and titles; others are full-function design and layout tools for those purposes.
I find that Adobe Encore handles most of my needs, but you may be looking for a less expensive alternative. (Encore is about $200 with an academic license, if I remember rightly.)
A general web search for "DVD Authoring" should turn up a selection of tools in all price ranges and with a spectrum of capabilities.

Turn off splash screen, tune and beeps?

How can I turn off:
-- the initial splash screen video of shaking hands
-- the the initial little tune that plays
-- the little beeps that play with every button press
I am using an N93.
Thanks for your help.
John

The keypad tone:
Menu -> Tools -> Profiles -> General (or the profile, which is currently set) -> Options -> Personalise. Then go to Keypad tones and set to Off.
The initial tune:
In order to have this off, the Warning Tones option in the given profile should also be Off.
The grasping hands:
Go to Menu -> Tools -> Settings -> Phone settings -> General -> Welcome note/logo. Now set to Text and enter some text or choose Image and select a picture. This will be the startup animation/text. If you simply want blank screen, draw a white image in Paint, save as JPG and put for logo
Ericsson T10i -> Nokia 7110 -> Siemens C45, C55, M55, M65 -> Nokia 6131, N73, N82 -> HTC Wildfire, Desire HD -> Nokia Lumia 800 -> HTC Desire X -> Lumia 820 -> Sony Xperia SP -> Lumia 925 + Sennheiser CX 500
If I've helped, use the Kudos button to thank

LabView 8.5.1 crashes at splash screen "appentrypoint.cpp, line 74 error"

Been using it for a while. Updated to lv2011 but need to be able to still use 8.5.1. After upgrading found out the earlier version is not compatible with the fieldpoint 6.0.10 drivers that updated my 6.0.1 version. So, I uninstalled the 2011 LV and 6.0.10 fieldpoint drivers. I reinstalled the fp 6.0.1 drives from an original CD. When I ran LV8.5.1 the above error occurs during the splash screen and LV ends. I uninstalled 8.5.1 and did a new installation from the original CD and I still get the same error. Would really like to get LV8.5.1 working again with fieldpoint. Thanks.
Attachments:
lv error code.JPG ‏103 KB

Hi jmw50290,
I see that you've tried uninstalling and reinstalling LabVIEW 8.5.1, but have you tried doing a repair installation?
Here are the steps to do so:
http://digital.ni.com/public.nsf/allkb/fe6b641e86e55af2862576de00038001?OpenDocument
Repair does things that regular uninstall/reinstall do not do, so it's worth a shot.
Sincerely,
Bogdan Buricea
Applications Engineering
National Instruments
Bogdan Buricea
Applications Engineer
National Instruments

One off splash screen

I'm just finishing some customer specific documentation and
we want to plaster their name all over it for the 'feel good
factor'.
A splash screen would be nice, but I only want it coming up
the first time the user opens the Help file - is there way to do
this?
Alternatively, is there a way of using a redirect to show a
welcome message when you first start the help file, then not have
that initial 'redirect' topic show in the TOC?

Hi Peter,
You were right about being able to exclude the Welcome topic
from the search. The thread about how to do it is here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=65&catid=449&threadid =1219416
The welcome message will come up each time the help file is
opened, so I'm thinking of geting the redirect to kick in after
just 1 or 1.5 seconds, so it's quick to disappear.
(It's really about making sure the customer thinks he's got
his money's worth - he's just paid for a week of my time!)

"media off-line" screen

When I opened my file (project) all of the audio and video clips were replaced with "Media Off-Line" clip. What's up?

L3101
Details, especially version of Premiere Elements, computer operating system, and etc are important.
Pending more information, you probably moved or deleted the source media that went into your project after you saved closed the project.
Another explanation is that you stored the project media on an external hard drive and, after you saved closed the project, something happened to the external hard drive (one example, drive letter changed).
Please check out the merits of the Project Archiver found under File Menu/Project Archiver with its Archiver and Copy options.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html
Thanks.
ATR

Z77A-GD65 Multiple BIOS Issues - B4 Hang, Splash Screen Blinking

Back in November 2012, I built a home server with a Z77A-GD65. Lately, I've noticed some strange things happening that I've been trying to research but to no avail.
First off, I get the B4 code hang-up whenever I'm booting. This doesn't matter if it's a cold boot or a reboot, it hangs on B4 for about 10-15 seconds, flashes 92 really quick, and then goes to A2 which it stays for another 5 or so seconds. After that I get the MSI splash screen for about 1 second, then it blinks 5 times. After that it goes into Windows just fine.
The blinking is a new issue, the B4 hang is not. I've read from multiple posts that this is a USB issue. When I disable USB legacy support, the issue goes away, but of course then I can't have legacy support. I have yet to figure out what exact device is causing it. In the process of trying to figure this out, I updated BIOS to A.A0. After updating to this version of BIOS the splash screen blinks 5 times before going to the "Starting Windows" splash screen. This is a more difficult issue to figure out why it's doing this because if you search for "BIOS" and "flash" or "flashes" or "flashing", you typically get results for flashing your BIOS. Hence, why I'm using the term "blinking". But even then I can't really find a solution out there.
I also happened to see that the website for the Z77A-GD65 is showing a newer BIOS version, but I'm unable to flash this (at least using M-Flash). I threw it on a USB, re-enabled USB legacy and whenever I click on it to install, the BIOS screen hard locks. The screen just freezes exactly where it's at in the BIOS and the mouse is dead. However, I can CTRL+ALT+DEL on the keyboard and it will reboot the system so I don't need to power cycle the computer. Not sure why this is happening either. Perhaps I need to flash this a different way? Maybe I don't need to flash this at all?
I could really use some input here on why this is happening.
As for the specs on my system, they're as follows:
i7-3770K overclocked to 4.2 Ghz by using the Turbo Mode in BIOS
32GB Komputerbay DDR3 PC3-12800 1600MHz DIMM with Low Profile Blue Heatspreaders Quad Channel RAM | 9-9-9-24 XMP ready
AMD PowerColor 7870 Myst Edition GPU - currently not overclocked although overclocking this doesn't seem to affect any issues
2 - 128 GB Corsair SATA III SSD - one runs the OS, the other I use to load games from
2 - 500 GB Seagate Barracuda 7200 RPM Sata II HDD's mirrored via Windows 7
1 - 750 GB Seagate Barracude 7200 RPM Sata II HDD
1 - 1 TB Western Digital MyBook USB 2.0 external
2 - 3 TB Seagate USB 3.0 external
ASUS DVD Burner - not sure which one, it's a cheapy $20 from Newegg
1 - PCI USB 3.0 expansion card
Antec TruePower New TP-550 Modular 550W Continuous Power ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS BRONZE Certified Active PFC "compatible with Core i7/Core i5" Power Supply
NZXT Switch 810 gunmetal - currently have 4 fans running but plan on more, also the Switch 810 has the multi-card reader in the front with 1x SD Card, 2x USB 2.0, 2x USB 3.0
for peripherals
1 - Microsoft 360 Wireless controller adapter (legit one, not the knockoff although I had a knockoff prior to getting the real deal)
1 - Logitech Wireless USB Keyboard with Touchpad
I tried to be thorough. Thanks in advance for any help!

Quote from: PirateDog on 26-August-13, 12:45:18
Probably a USB device problem.
This is a candidate, as well as mouse and keyboard. Disconnect USB devices one at a time to find the culprit.
A lot of devices running. PSU a +12V single rail or is it multi rail? A rail going to the graphics or components may not be enough amps. My best guess is the card reader.
For UEFI/BIOS flashing, select your mainboard here and use the forum flash method;
I'll definitely try unplugging some of these USB devices to see if that helps with the B4 hang issue.
As for the PSU, according to the description for it on Newegg: "Four industry-leading independent +12v rails are provided for more stable and safer power output." It has two rails going to the GPU. The GPU is a new addition to the system and so I wasn't running it until recently. The issues were occurring beforehand, but you're right that this PSU is underpowered for the rig considering PowerColor recommends a minimum of 500w. I'm going to be buying a larger capacity one sometime in the very near future. Any recommendations on good modular PSU's? What's a good way to tell what wattage to get?
Thanks for letting me know about the forum flash method. I'll be back later when I have some results.

Asset Off Line Splash Screen burnt to DVD

Similar Messages

Maybe you are looking for