Asset opening for two years

hi
i have opened the asset financial year for 2010. i have not closed the year 2009. When i try to see the asset information system than the last year than still the system response is
(Fiscal year change not yet made for company code XXXX
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code XXXX, although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code XXXX.
Proceed)
please guide how can i know that the 2010 year is opened or not and how to solve this issue.
Thanks

I have not done any entry for fiscal year 2010. But the problem is that i want to see the reports of information system for the fiscal year 2009. I opened the year 2010 in AJRW but still when i run the report , it is showing the error that the new year is not opened.
Thanks for the Reply

Similar Messages

How to create a calendar for two years in GL

how to create a calendar for two years in GL

Hi,
- Login into Oracle EBS and select a responsiblity with GL Superuser drants (e.g. General Ledger Super User)
- Navigate to Setup + Financials + Calendars and open the GUI Accounting (Navigation for R12)
- Query the used calendard (used from jour Set of Books/ Ledger via the GUI
- Enter for each Period (= Period Type 13, 16, 18,...) one Record, have a look to the existing data, used the same logic.
In the GUI, defined the calendar for 2 Years
Dirk

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

My Apple ID is valid but My icloud account does recognize it. I've had iPod touch for two years

I've had I iPod touch for two years and have find my iPhone on it. I've lost it and now when I try to look for it it says my Apple ID is valid but does not have an icloud account. Like I said I set it all up when I first got it and use it a few times why won't it work now and is there some way to reassociate it with my ID. Is there somewhere my info is stored?

Do you another Apple device that is eligible for an iCloud account and is using that iCloud account?
http://support.apple.com/kb/HT4759
I suspect not and that the iPod has been restored and thus your account removed for the iPod. Then you iCloud account was deleted since you not longer have a device using it.

HT1391 Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one.

Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do? This one kid reported to them that his was stolen and they gave him a new one. Will they do the same for me? Is there any other way I can get all my pictures from my iPod without iCloud set up? Would Apple be able to lock up my iPod so they cant use it at all? Please help me, thanks (:

ipod touch lover wrote:
Recently my iPod touch 4th gen. was stolen. I have had it for two years, so I don't have a warranty on it anymore. I reported it to the police, but what will apple do?
Nothing... why would they do anything?
Apple does not provide insurance and they are not law enforcement.

I have had an iPod Touch 3rd Gen for two years and the apps have worked fine in the past. Suddenly the apps will not launch, they appear to start then just exit. Is there a reason why it is doing this?

I have had an iPod Touch 3rd Gen for two years pretty much and the apps have worked fine. Suddenly when I go on an app it appears to launch then just exits. I tried turning the iPod off and on again, but that made all my apps behave like that. Settings and those things work fine still. Should this suddenly happen? I dont want to lose all 204 apps.

- First try resetting the iPod. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try downloading/installing a new app
- Restore from backup
- Last, resore to factory defaults/new iPod. this is last result since you will lose app data.

Getting error while Year end closing in asset accounting for the year ...

Hi,
i am getting error while doing Year end closing in asset accounting for the year 2004. It is giving few assets and saying that "Depreciation not posted completely"
Can any body help in this reagards.
With regards,

Dear Shree,
Do u have the list of all such assets for which no depreciation has been posted. If yes, then go to AFAB, upload the list all these assets & then select the radio button as 'repeat'.
This will post you depreciation for all the assets. then close the year.
regards,
Ajay

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help

I have been using CS6 for two years without incident. Suddenly the Media Encoder stops working, showing APPCRASH and displaying error message about WatchFolder.dll - I tried uninstalling and re-installing to no avail - can anyone help?

Hi Mylenium,
Thanks for your response.
Here is the error information showing up:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Media Encoder.exe
Application Version: 6.0.0.382
Application Timestamp: 4f62fcf1
Fault Module Name: WatchFolder.dll
Fault Module Version: 6.0.0.382
Fault Module Timestamp: 4f62f37f
Exception Code: c0000005
Exception Offset: 0000000000007899
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105
Additional Information 1: 9a62
Additional Information 2: 9a620826d8ae4a2fa8b984b39290a503
Additional Information 3: 1fb3
Additional Information 4: 1fb304eee594288faeefbf1271b70d37
I am using a PC Windows 7

I've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i've had a 4s for two years and today when i turned it on it told me my phone could not be activated becasue the activation server could not be reached. what should i do? i'm lost.

i do not know what this means. I purchased the phone brand new two years ago and have never had any problems with it. The message i am getting reads:
"your iphone could not be activated because the activation server cannot be reached. try connecting your iphone to itunes (which i don't have) to activate it, or try again over cellular connection in a couple minutes. (which i have tried several times with no success) you can also try to activate using wi-fi connection (which i do not have). if this problem persists, contact apple support at apple.com/support."

HT1212 After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub. I have tried everything I can think of to get it working again but to no avail. My desktop computer still works through the same hub

After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub although my desktop computer still connects. I have tried everything I can think of, including suggestions off Google/You Tube but nothing makes any difference. Any ideas. Surely it is not fit for the scrap heap after two years, but is clearly no use as it is.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Signed up for two years two months ago and now they are taking away my Music Channels!!

I signed up for the triple play back in December for two years, HD ultimate. I received an E-mail yesterday that all of my Music channels 1800 to 1845 will be gone unless I pay another $35 a month!!
I called up and Verizon says our provider is changing their plan. I indicated I signed a two year contract with Verison and I can care less about their provider isssues.
So what are my options? Anybody else dealing with this **bleep**?
Thanks

I wouldn't assume because you or others may not have receive notice as an indication that this isn't possible. For example, I have yet to receive any notice from Verizon about the removal of the Bridge TV & Funimation channels like many other customers. Verizon is dropping the ball with exisiting customers and their own customer service reps based on conversations I had with them. I'm not sure if it is conscious tatic or effort of not informing exisiting customers of programming changes. But it seems to be an ongoing issue by just the posts you see on this forum.

Distribution certificate lasts for two years now?

According to the Apple developer documentation, each distribution certificate only lasts for one year:
"A distribution certificate is valid for one year from date of issue."
http://developer.apple.com/library/ios/#documentation/ToolsLanguages/Conceptual/ DevPortalGuide/ManaginganiOSDistributionCertificate/ManaginganiOSDistributionCer tificate.html
I just created a new distribution certificate today (in an Enterprise portal), and it seems to be valid for two years? Has Apple changed something recently?

Why don't you ask this in the Developer's forum?

We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years) and the screens has gone black and wont turn on. Phone is charged. We have tried force quit- home screen and top button. help pls

We have iPhone 4 and I plugged phone into after market hardwired plug in car (that we have used successfully for two years). The screen has gone black and wont turn on. Phone was charged. I have tried force quit- home screen and top button. iTunes is not recognizing phone when I plug into computer. help pls

FIRST charge with an Apple charger for at least 15 minutes. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. Hold for up to 30 seconds. If nothing happens the phone hardware has failed.

TS1722 Have lost ability to open Boot Camp on start up or restart. Only Mac icon shows up. Worked perfectly for two years and now it implodes. Any hope of re-opening Boot Camp?of recapturing data in

Have lost ability to open Boot Camp on start or restart. Icon does not show up. Had been working for 2 years, then nothing. Recently had problems with Kodak Easy Share in PC partition. Any connection? Any hope of reopening Boogt Camp without losing data already there?

Can you see there is a partition?
Can you boot Windows 7 DVD?
Did you think you would never need a backup image?
So no Safe Boot, no F8, possible?
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions. During testing it was available free, but now costs US$19.95. MR user Rodus reports that it damaged their OS X partiton and a reinstall was required, so heed the warning and have a backup.
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section

Firefox will not open. I have used it for two years.

For 2 years, until yesterday, Firefox worked well. I opened it, using the "Internet" button on the keyboard, or from the start menu. Now, nothing responds. Yesterday, when Mozilla was running, the top part of the screen display disappeared. The "search" message filled the whole screen. I tried clicking on Mozilla in the Start tableau, and the "All Programs" tableau. Nothing. According to the Control Panel, Mozilla, all 26.97 megabytes, is still there.

For some things you can try see [[Firefox will not start]].
I would start by seeing if a new profile works. See [http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows creating a new Firefox profile on Windows - MozillaZine Knowledge Base]
If the new profile does work, you can transfer selected data such as bookmarks and passwords to the new profile. I would not copy preferences or extensions, instead re-install the extensions. See [http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox Transferring data to a new profile - Firefox - MozillaZine Knowledge Base]

Asset opening for two years

Similar Messages

Maybe you are looking for