Asset PO - Assets Masters Quantity Discrepancy?

Hello Experts Fi-AA,
We are facing problems with Assets POs. Observed a discrepancy in updation of quantity in asset masters
when an asset was procured through PO.
Case1 :
While creating asset masters if we left the quantity field blank, even when MIRO happened Quantity not updated.
Case2:
While creating asset masters if quantity was maintained in asset masters ,same was doubled when MIRO completed.
request kindly help in giving solution
thanks & regards
Srihari

Hi Srihari
If you create the Asset Master Leaving the Qty Field Blank, but updating the Unit of Measure (UOM) Field as EA, it always updates the Qty upon F-90 or MIGO/MIRO....
If UoM is not appearing in your Asset Master, then include the same from Screen Layout...
Br, Ajay M

Similar Messages

Changing useful life of assets during asset to asset transfer

Hi All,
We need to transfer some assets to new assets changing its useful life. Below is my scenario.
Old Asset "A" has an useful life of 5 years and depreciation start date is 01.01.2006. Where this asset would be fully depreciated by the end of year 2011. The depreciation runs have been completed for November 2009.
Before using transaction ABUMN, I created a new asset "B" in a different asset class with the exact details of the old asset ONLY changing the useful life to 3 Years. (even the dep start date is 01.01.2006 - same as the old asset)
In Tcode ABUMN, I entered the old asset, doc date as 30.11.2009, posting date as 30.11.2009 and asset value date as 30.11.2009. Transfer variant 4 is been used in this case. The transaction went through successfully. The main idea behind this process was to depreciate the entire new asset "B" by the end of 2009, which should be the case as if 01.01.2006 is the dep start date with useful life of 3 years.
But this is not happenning. The entire depreciation is not been shown under plannned values for DEC 2009. Only a small value is shown. I need this asset to be fully depreciated by 31.12.2009 in variably absorbing the enire balance depreciation for the month of Dec 2009.
Please help me resolve this asap or please suggest me a different way of doing this if I am not doing it the right way.
Thanks & Regards,
Maleeq

Hi Kishore,
I need to change the asset class as well and thats why I need to to do the asset to asset transfer.
Thanks,
Maleeq

Forgot to create Goodwill asset during asset migration

Hi
In the migration process ,w eforgot to create a goodwill as an asset in asset accounting,but we migrated the balances into the respective GL accounts
now we need to create this asset because for local balances we have to post the depreciation
please kinldy advice
thanks
jvn

1. Upload it by using AS91
2. Rest your Asset Reconciliation Accounts to Non-Reconciliation Accounts OAMK
3. Post Journal Vourches in FI thorugh F-02 (Make sure that balances in Step1 and Step3 are matching by asset class wise)
4. Again reset back the asset reconciliation accounts (Refer Step 2)
Regards,
Ravi

Digital pictures of assets in asset master record

Hi,
I would like to know if it's possible to include digital pictures of assets in asset master record in ERP.
We are using ECC 5.0.
Thanks!
Regards,
Diego

I can think of 2 ways , 1st is using the Services of Object where u can attach a link or assign a picture linked to the Asset how to do it is usually u go to AS02 then specify the asset to edit then click at System ->services for object-> create external document(URL) and assign the path and name to be attached.
2nd way is using GUIxt which is an external party tools integrated to SAP, which u can design the layout of your maintenance screen and assign a sub routine to link to a picture file by way of asset no.

DAM Asset Share / Asset Editor

I created DAM Asset Share / Asset Editor pages and customizied metadata on editor. I created them in dam admin - New - New Asset Share .... That created both asset editor and asset share pages and I customized them. I configured query builder of that asset share to point to the new asset editor.
But how can I change the asset editor assigned by default to the DAM Assets? For e.g. When I log into damadmin, any asset I open under Geometrix Outdoors or Geometrix is opened with the default asset editor. If I create any asset in a site for e.g. myWebsite, then the asset is opened via default asset editor. How can I modify that editor or override that editor with a custom one?

As far as i know asset share and asset editor are form based application which allows to edit/view shared resources available at paths configured in asset shares (in application itself). To edit any of listed resource in asset share you can use "edit metadata" link under "action" in left column after selecting the asset.
If you want to apply the asset editor globaly on applications you should override it from "/libs/dam/content/asseteditors" to "/apps" (i hope this may work)
you can also refer http://dev.day.com/docs/en/cq/current/dam/creating_and_configuringdamfinderandasseteditorp ages.html

How to change the group asset in asset master

Dear ALL,
If i want to change the group asset in asset master it is appearing in disable mode.Kindly suggest how to make in enable mode. I check the configuration settings and group asset make it is an optional filedl But still it shows in disable mode.Please suggest.
Regards
Maruthi

Hi
Thanks for all,
Problem i wrote to sap, Once transaction happend, it is not possible to change the group asset. I convienced my client no issue.
Regards
Maruthi.

Useful Life for Assets and Asset Sub Numbers

I am just learning about SAP Asset Accounting, for an implementation project, and I have a question about the Useful life of an Asset Sub Number when setting up Assets with Asset Sub numbers.
Does the useful life of the Asset Sub number have to be the same as the useful life of the Asset Main number?
I would like to know if I can set up an Asset, such as a building, with the asset main number, that has a useful life of say 40 years, then create asset sub numbers for things like the HVAC system that has a useful life of say 15 years.
I am not sure if it would be better to use a group asset for this situation or not.
Thank you in advance for any help you can give me with this!
Amy Hay

Amy,
"Does the useful life of the Asset Sub number have to be the same as the useful life of the Asset Main number?"
No. A sub number can have completely different attributes from it's main asset (cost center, order, keys, UL...).
The situation you're describing is possible and from a design perspective it <i>can</i> be a good idea. Yes, you can create a main asset "Building" with a 40 year UL, but then have sub-assets for other major components (HVAC, Elevator, Security). This is one of the two types of design techniques for sub assets (a component based design). The other is based on the year of capital improvements. For instance, you could create a subasset "2007" and settle all projects related to capital improvements to that subasset. That way you would get visibility into capital acquisitions in FIAA reporting without having to goto CO or PS.
I would definitely <b>not</b> recommend using group assets. Group assets are used for composite depreciation scenarios and do more than just "group" similar records together.
-nathan

How to remove deletion of asset from Asset Histrory

Hi Experts
In my project there are some assets created and some transcations are posted and reversed back
since those assets are created by mistake, they should not come into asset history
can you please tell me how to remove those assets from asset histroy
Regards
Sreenivasulu

Hi,
this should be possible by using AS06 and deletinge these assets. Please note you need to set deactivation date in AS02 first.
Hope this helps,
Luana

How to modify select query for retrieve assets from assets tab and assets in merchandising in 10.1.2?

Hi All,
      I need to modify the SQL for retrieving assets from assets tab and assets in merchandising in 10.1.2. I found the class for SQLQuery builder, but I want to change the SQL.
      Could you anyone please how to solve this.
Thanks & Regards,
Bala

Hi All,
      I need to modify the SQL for retrieving assets from assets tab and assets in merchandising in 10.1.2. I found the class for SQLQuery builder, but I want to change the SQL.
      Could you anyone please how to solve this.
Thanks & Regards,
Bala

Create asset through asset mass additions backend

Hello all,
I am going to create asset through asset mass additions backend.
which table am I need to upload the asset information...
what are the mandatory field that I need to update...
Please help me to achieve this task..
Thanks and Regards,
Muthu
Edited by: Muthu on Feb 8, 2013 12:55 PM

Hi
For commitment ans Actual Cost Updation please check you cutomization settings.
AUC (Asset Under Construction) gets created once WBSE Element is Released provided that Investment Profile is defined in Project Profile configuration.
Asset number get created after Full settlement of WBSE and Asset Completed.
Please check.
Swapnil Kharul

Group asset in asset masters

Dear all
For assets automatically created under asset class AUC,through Project system module,Group asset is not getting attached .
So while carrying out year end closing system is throwing an error "Asset is incomplete".Should i change the asset masters, i mean add group asset for these assets.is there any mass change option available?
Thanks in advance
Madhavi

Dear Madavi,
Please create an LSMW for group asset maintenance.
Steps
1 please find the assets where group assets are missing.For this purpose please check at table leve ANLB.
2 once you find the assets please create an LSMW for T code AS02 and Update group asset field.
3 Once the updation is over please do the year end process.
Thanks
Manu

Advice on asset/asset subnumber/asset quantity

Hello
When I buy 50 computers from a vendor, all identical, I receive the computers and the related invoice from the vendor over a period of 18 months for example 15 on 1.1.2010, 10 on 1.3.2010 and 25 on 1.9.2010
Should I
create 50 separate assets and when entering the invoices enter 15 or 10 or 25 lines for each asset?
or create 1 asset with 50 subnumbers and when entering the invoices enter 15 or 10 or 25 lines for each assetnumber?
or create 1 asset with quantity 50 and when entering the invoice post to the same asset?
or create 1 asset with in the description field "50 computers"?
Please advise the pros and cons of each technical possibility.
Thanks
Arjan

Hi,
Normally a fixed asset can be represented in the system using several master records, that is in the form of sub-numbers. Assets may be divided using sub-numbers if:
-Managing the values for subsequent acquisitions in following years (i.e., buildings) separately.
-Managing the values for individual parts of assets separately,
-Dividing the asset according to various technical aspects.
In your case you have purchased 50 computers but you received invoice in 3 periods.
For each period when you are booking invoice (one invoice for several computers) give the Number of similar asset field with that many number of computers for the invoice you have received.
For example in period 1 you might have received invoice for 10 computers then enter Number of similar assets with 10. with this single asset master creation transaction your can create the asset master with similar parameters but the description and inventory/serial number for each computer may differ.
Why because in future if you want to have any special kind of transactions for indidual computers(assets) it is not possible if you create it as a single asset for each invoice.
Regards,
Krishna Kishore.

Asset Procurement & Asset Goods Movement

Dear Experts,
Please Explain the Asset Procurement Scenario in details.
1] Asset Material type - whether it should be copied from Raw Material type or Directly Raw Material type
                                   can be used and what about quantity and value update check box
2] Purchase Order - PO creation with account assignment category A and the Asset number of the asset
                             material.
3] Goods Receipt - GR for Asset Purchase Order. Asset material will be posted directly to Consumption?
                            whether Accounting document will be posted? How the inventory of Asset material will
                            be managed?
4] Goods Issue - How to manage goods issue or withdrawal of Asset material? after goods receipt
5] Invoice verification for Asset Purchase Order?
Thanks in Advance

Hi,
1)   Asset Material type: You can use the non-valuated material type or normal valuated material type (subject to how you are going to manage your stock as per your inventory management strategy).
2)   Purchase Order: The PO shall be raised with the "A" Account Assignment Category where the Asset No, Internal Order number shall be entered.
3)   Goods Receipt - Upon GR posting, subject to how your material type is defined, it can either increase your stock quantity (in case of non-valuated material type) or for direct consumption. This GR posting will generate the accounting document in background automatically.
4)   Goods Issue - It is very much again subject to how your material type is defined. If it is set as non-valuated material type, then you can make further goods issue after GR. Otherwise, no goods issue is required as the items are to be consumed directly upon GR posting.
5)   Invoice receipt - The LIV process will be used in this particular case.
Cheers,
HT

Payments and Debts about an ASSET (APC ASSET)

Dear sap colleages
I need to know these information about an ASSET:
Purchased orders,
Items from purchase orders,
which of these items i've received, i've paid (also date), i've not paid ( amount of debt related to asset)
payments in advanced (date),
wich of these payments have been cleared (clearing date) and wich not,
who is the vendor,
other expenses (such as delivery)
the amount of taxes,
invoices related and NOT RELATED TO purchase order
payments without invoice
Which transactions do i need to follow?
or
Which document flow?
or
Which tables? Wich keys?
or
Is there a standard report that can give me such information?
Any documentation and/or code will be appreciated.
I need to program a report to integrate all these information.
Thanks and Kind Regards

This request needed a deep analysis. There were not any standard function.
Thanks

Asset Retirement: Asset Sale without customer (ABAON)

Hi Experts,
While posting Asset Retirement in ABAON, error occurs as "SYST: You can not determine the period for rule 02 to 23.03.11".
Here we are retiring 3 assets. One from one asset class & other 2 from another asset class.
for the 1st Asset Class- period ctrl. method is 006 and in T-code AFAMP, in retirement column rule for 006 is defined as 11, which means "Next Month". AND...........
for 2nd Asset class- period ctrl. method is 003 and in T-code AFAMP, in retirement column rule for 003 is defined as 02, which means "Pro Rata upto mid-period at period start date."
Now I think problem is there for 2nd asset class as rule 02 can not determine the period according to error.
Please explain the logic? What axactly system is saying? and how can I solve this issue?
Regards,
Nilesh
Edited by: NileshSB on Mar 31, 2011 6:36 AM

Hi Nilesh
Nice to know the issue has been resolved.
OAVH is used to determine the relationship between posting intervals and periods in the given fiscal year version. The assignment entries in OAVH have to be changed in the following cases:
u2022 You use period control rules you defined yourself.
u2022 You change the definition of the periods in the fiscal year version in Financial Accounting.
As you noticed, case you use a year-dependent fiscal year variant, then you have to perform OA84 to generate period controls properly.
For more information, you can refer to IMG documentation in following IMG menu path:
IMG: Asset Accounting -> Depreciation -> Valuation Methods -> Period Control -> Define Calender Assignments (OAVH) / Generate Period Controls (OA84)
Regards
George

Asset PO - Assets Masters Quantity Discrepancy?

Similar Messages

Maybe you are looking for