Asset PO Storage location

Hi All,
        we have created a Asset PO with meterial code.
Material Type for Material is FHMI (Tools). & At Plant level price & quanlity updated is avilabe for this metarial type.
Now i am not able to enter Storage location while doing G.R.
what setting we have to do for this.
or any checks required for this.
Regards
Pavan

hi
we cant enter storage loc for asset PO as the material wil go for direct consumption agianst thet ASSET no
regards
kunal

Similar Messages

  • Consmption to asset without storage location

    Dear all,
    I have created a Intercompany PO with accoutn assignment? When i see at the good receipt done- its without the storage location.
    So the problem is now i want to do the consupmtion for asset using 241 moveemnt type. But this movement doesnt work as it requires a storage location and i am stuck. Please can somebody help. thanks to all.
    Cheers
    Jasmeet

    I have created a Intercompany PO with accoutn assignment? When i see at the good receipt done- its without the storage location.
    You already goods receipted with account assignment.So it is alredy consumed against account assignment.
    So the problem is now i want to do the consupmtion for asset using 241 moveemnt type. But this movement doesnt work as it requires a storage location and i am stuck. Please can somebody help. thanks to all.
    You can not use consumed material again with 241 mvt type.You need to choose materials which are in stock and it will allows you post
    Edited by: Sridhar Jayavarapu on Feb 9, 2010 5:09 PM

  • System asking for storage location in case of Asset GR,

    dear all,
    In our case  system is asking for Storage Location in case of Asset GR, though PO was account assigned.
    I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
    Pls guide,
    Regards.

    Hi,
    Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
    Reg
    dheeraj

  • Storage location in QA32 not appearing

    HI GURUS
    IN QA32 , STORAGE LOCATION IS NOT APPEARING FOR FEW MATERIALS . IN PURCHASE ORDER WE HAVE CONSIDERED ASSET ACCOUNT ASSIGNMENT CATEGORY , WITH VALUE & QUANTITY UPDATION . BUT DURING GRN STORAGE LOCATION IS NOT TAKEN INTO ACCOUNT SO IN QA32 ALSO STORAGE LOCATION IS NOT APPEARING. IS THERE ANY OPTION WHERE STORAGE LOCATION SHOULD APPEAR IF IN GOODS RECEIPT IT IS THERE OR NOT.

    hi AK Marwadi ,
    Thanks for your response, they need storage location for reference in QA32 to keep a track otherwise they are not checking those documents at all . they should go to purchasing document for storage location . Please let me know apart from development anything can be done in standard.
    Regards,
    Sowmya

  • Creating vendor as a storage location

    Hi all,
    My client want to know in any time what is the stock lying with his vendor by provding access to his system (as a user)
    The vendor has to update his stock in a storage location directly ,I know vendor stock will become current asset to my client,
    still I want to know what all the implication will be if I create a legal entity like vendor  as a storage location.
    Regards
    Kantha

    Hi
    You can define a consignment process to fulfill your requirement.
    You can create a consignment procurement process
    You create a Consignment PO on the vendor and then do GR, only when vendor brings stock into his storage ( here you create a virtual storage) here no accounting documents will be created. The stocks are still on Vendor books.
    When ever you want to take the stocks into your account do a consignment GI from the virtual storage location and then you can do the settlement to the vendor.
    I think this is right option and a standard one.
    Cheers
    Kris

  • How do i configure Storage location

    Hi
    Can any body give me suggesition
    i need to configure my org Structure like this
    My office treating as plant. across india we are having around 50 sites are there. the site given by our client. where we are placing our assets.
    My question is can i map these sites as my storage locations.from one site to another site material transfer is also happens.
    can any body give suggesitions.
    Regards
    Sitaram

    Hello
    Yes.
    You may treating office as plant and sites as storage locations.
    But ask your question here:
    SAP ERP - Logistics Materials Management (SAP MM)

  • Opening and closing stock at storage location level

    Dear all
    I need a std report which will give the opening and closing stock at storage location level, Or should I go for dev. if yes please guide me.
    Regards
    Samuel

    Hi,
    check if you can use S_P00_07000139 report, select "Display stock movement by plant (with amount) and further select Sloc from layout.
    Regards,
    Vikas

  • Report including open purchase order quantity for one storage location

    Hello gurus,
    I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
    I.e. like this:
    Plant 0001, storage loc. 01
    Material        stock        open purchase order quantity
    100000        200 pcs.   50pcs.
    Is there such a report in SAP standard?
    Thanks
    Alicia

    hI
    U want the report like this ,
    MAterial stock availablein storage location and with Open PO quantity for the same material.???
    This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
    One is for materil stock in storage location is MB52 or MB5B
    THen ME2N for open PO quantity for that material.

  • Date Wise and Storage Location Wise Stock Qty & Value Report......

    Hi Experts,
    We want a report Date Wise(As on 31.03.2008) and Storage Location Wise Quantity & Value Report for only Finish Materials. Is there any report ?
    From Mb5b we canot get storage location wise report as we get only plant level qty and value.
    Pl. guide us.
    Regards,
    Yusuf

    Hi Yusuf,
        Try the Tcode: MC.9 there enter the site and article and executeYou will get details of the article
    stock, value. if you double click the article you will get the details of storage location.
    Hope it will be help for you
    Regards
    GK

  • Stock on posting date -storage location and batch wise

    Dear All
    I need to developa report exactly same as MB5B but with storage location and batch wise.
    We need  storage location wise opening stock, total receipts, total issues and closing stock, and values for given time period.
    I have gone through some history tables like MCHBH and MBEWH.
    But all the history tables are having fileds for period wise but not date wise.
    Any focus on this?

    You have to read the coding of MB5B to see how SAP is doing it.
    The stock per date is calculated, starting from a month end, adding or reducing quantities based on movements until the date in question is reached.

  • Storage location wise Opening/Closing Stock on posting date (mb5b)

    Hi,
    Report mb5b gives opening stock and closing stock as on date. In the selection screen, if we do not enter specific storage location then the opening/closing stock is displayed as sum of all storage location stocks for a given material.
    Where as if we enter storage location, it gives storage location specific output. (with Storage loc/batch stock radio button)
    My requirement is - without entering storage location in the initial screen, the system should display storage location specific opening/closing stock.
    To get this, presently I need to execute mb5b transaction individually for every storage location.
    Warm regards,
    MS

    Hi Madhavi
    This report you can have in T code MC.6 and another t code for opening and closing stock in t code MC.9
    Regards
    Vivek
    -- Reward if helpful
    Edited by: Supergene on Feb 28, 2008 3:17 PM

  • Opening and closing Stock report at Storage location level- date wise

    Dear all
    Is there any standard report to view opening and closing stock at storage location level? ( we have MB5B which resets the entry screen if we enter SLOC details).
    Thanks
    Sam

    Do  I have the option of  selecting Storage Location wise opening and closing stock on a particular date or period, that is what I have requested? Is it possible, evenafter selecting storageloc/batch stock and entering all the SLOCs in the selection creen, the report output does not contain any SLOC, and using ctrl+F8 or display variant does not have SLOC as a field also.
    pls gudie
    sam

  • MC.9  drill down at storage location level

    In mc.9  report  stock against plant xxxx  at storage location drilldown
    I see
    In total  valuated stock is 0
    But
    at storage location 0040 I see  423.686 as valuated stock
    and at storage location 5M06 I see  minus 423.686  as valuated stock
    Client need to have not stock at plant level.
    In total I see 0
    But client is bothering about valuate stock he is getting at storage location level.
    Thanks,
    Kiran

    Hi Jurgen,
    For plant xxxx there is nil stock in mc.9 report. only I see sloc  to sloc transfer of qty. for example sloc 0001 has qty + 100 & sloc 0002 has qty -100.
    Finance is asking to user that this + - qty should not show in mc.9 and asking him to get it removed.
    What should I suggest to user and finance.
    Thanks,
    Kiran

  • Mc.9 Multiple storage location issues

    Hi,
    I am fetching data from mc.9 in my program but if the use enter multiple storage  in selection only 1st value is printed following is code and how will i come to know which material is for which storage location since mc.9 data is not getting stored anywhere
    SELECT-OPTIONS : SLOC LIKE S031-LGORT.
    SUBMIT RMCB0300 WITH SL_WERKS-LOW = PLNT
                        WITH SL_LGORT IN SLOC
                      WITH SL_MTART = 'HALB' WITH SL_MTART = 'VERP'
                        WITH SL_MTART = 'ROH' WITH SL_MTART = 'FERT'
                        WITH SL_SPMON-LOW = FPERIOD
                        WITH SLV_NO = 'STK'
                        WITH SL_SPMON-HIGH = FPERIOD EXPORTING LIST TO MEMORY AND RETURN.
    while append to internal table  even if i specify both high and low value it prints low and high incorrectly how will this problem will solved
    itab-lgort = sloc-low.
    Help required for same.
    Thanks
    Shruti

    Hi Shruti,
    I simulated the code given by you and all the storage locations are being populated in the backed.
    You can check this by putting a breakpoint at the below code in RMCB0300 and checking the value of sl_lgort[]. You will receive the number of SLOC inputs provided.
    AT SELECTION-SCREEN OUTPUT.
      FLG_FOUND = FALSE.
      PERFORM SPEZIAL_AT_SELECTION_SCREEN_O IN PROGRAM (LIS_PROGNAME)
                                            CHANGING FLG_FOUND
                                            IF FOUND.
    This is a data issue and you may not have any records for the selected input.
    Regards,
    Jovito.
    Edited by: dsouzajovito on Dec 29, 2010 5:56 AM

  • Report for material documents with storage location

    Hi gurus,
    I would like to know if there is a report to display material documents but in the same screen display storage location from and storage location dest.
    Thanks for your help.
    Regards.

    Hi,
    You can use MB51 or MB59 with customised layout selection for your requirement.
    With regards,
    Ajay.

Maybe you are looking for

  • Can't connect to wireless network

    I have a wireless set-up that I've been able to connect to the past, but now I can't. Number 3 port light is on, as well as wireless, internet  and power. No light on above the WI-FI protected set-up button.

  • Why are images not displaying at correct resolution in emails?

    I've just upgraded to Windows 7 (64bit). Thunderbird is not displaying images at the correct resolution: images that I insert into the body of an email and images used in my signature. The images appear larger than they should and pixelated. It seems

  • Please tell me how can  declare an array of object.

    how to create a two dimentional array object of a class. let, class abc{ abc(){ is it posible-- abc ss=new abc[10][10] please tell me how can declare an array object.

  • Firefox freezes after turning sync on

    Hello I have a strange problem that is driving me crazy for some time now (from firefox 5) I am using firefox on two computers (pc and a mac(both windows and mac os)) which I guess makes 3 sync devices. I have a standard setup on all of those, no sup

  • Log file handling in BDC

    Hi All, I want to store the log message into a folder on aplication server of BDC process (either success or error msg). Folder path is taken from the user, n i want to store these success n error msg logs into different folder(1 for success n 2nd fo