Asset Report - for useful life of an asset

Dear Friends,
Is there any standard report which gives the following information --
1.  Asset Number,
2.  Asset Name
3.  Account Determination,
4.  Profit Center
5.  Useful Life,
6.  Depreciation in the current Year
7.  Accumulated Depreciation
8.  Acquisition Date
I tried in Asset Balances Reports.  Most of the fields are coming except Useful Life.
Can any one please suggest.
Regards
KVKR

Hi
There is no report with usefullife , either you can go with query or you can extract Asset standard report where you will find most of the details you mentioned and for usefullife please use table  ANLB and extract data from this table for useful life. You may copy  your asset nos extracted by the above standard Asset report and paste that in the asset field of table ANLB.
Now you can insert the useful life in your main report.
cheers
Mukta

Similar Messages

  • Tcode for Useful life of the asset

    Hi Gurus,
    Is there any standard report or Tcode to know the "Useful life of the Assets" ?
    Madhu

    Hi
    Please check table ANLB
    Thanks & Regards
    Phaneendra

  • Report for Useful life by G/L and Asset Class

    Hello SAP Gurus'.
    Is there a standard SAP report we can use that gives Useful Life by G/L and shows Asset class?
    Thank you!!

    Dear,
    You can add more than five fields in this variant that was created?
    Because I am not able to include more lines.
    Thanks already
    SSS.

  • Wrong depreciation calcualtion when we change useful life of an asset

    Hi,
    We change the useful life of an asset during the middle of the year.  The deprecaiton calculation is not effecting correctly for the remaining useful life of an asset.
    We are using stright line method of depreciaion. I will appreciate if any post some tips what is wrong .
    Example: 
    Current State: 
    Acquisition value: 300,000
    Acquisition date: 1/1/08
    Useful life: 3 years
    NBV 12/31/08: 200,000
    NBV 6/30/09: 150,000
    New life: 2 years, starting 7/1/2009
    Current methodology:
    NBV at 12/31/08 divided by new remaining life as of the beginning of the year (2009) $200,000 / 12 months = $16,667
    Depreciation expense in 7/31/09: $66,669 ([16,667 * 7 months = 116,669] minus depreciation at old method booked for first 6 months of 2009 [200,000/24 = 8,333 * 6 = $50,000]). $116,669 u2013 50,000 = $66,669
    Monthly Depreciation expense between 8/31/09-12/31/09: $16,667 / month
    Future State: 
    Requested methodology:
    NBV at 6/30/09 divided by remaining life as of the date of the change: (150,000/6mos) $25,000
    Can any one explain what is the issue

    Hi,
    By default, any change in depreciation parameters will recalculate depreciation from the beginning.  If you want to change depreciation terms on different phases, you may need to introduce a depreciation key which changes percentage in multi-level method.
    Best Regards,
    Madhu

  • Changing useful life of an asset

    Hi All,
    Client wants to change the asset's useful life from 4 years to 3 years. Also previous depreciations should not get affected due to this. The new recalculated value of the asset should be spread over the remaining useful life and depreciation amount should also be recalculated accordingly. Do we have such functionality in SAP version ECC4.6?? or we need to post the depreciation manually going forward?? I have tried smoothing method but this is also not helping me out.
    Please advice if we can do something in it.
    Many Thanks,
    Parul

    Hello Parul
    Sorry but this functionality is only available as of release 6.0 if you have the
    new depreciation engine activated. Note 965032 will provide you more details. In
    particular section 4. c) Managing time-dependent depreciation parameters:
    With the new depreciation calculation, you now have the option to 
    change depreciation terms during the fiscal year. This means that 
    the changed parameters are included in the calculation always     
    from the period for which the period is also valid.
      The following depreciation terms can be maintained   time-dependently on the   fixed asset:                 
      -  Depreciation Keys                                                                               
    -  Useful life                                       
      -  scrap value/scrap value percentage rate                                                      
      -  variable depreciation portion                     
    Regards
    Javier

  • Asset to get the assets in which useful life was chnged.

    Which Asset table will capture the changes made to the asset useful life in the asset master data.I mean i should be able to get assets in which the useful life was changed in any speciied period.

    Hi,
    change documents you can see as follows:
    Go tto asset master datta (AS03 or AW01N) - Environment - change document.
    regards Bernhard

  • Asset History Report - Useful Life of the Asset

    HI Freinds,
    The users desire to have the useful life included in the Asset History Report generated using the T Code AR02. How can we have the useful life displayed in the Report?
    Thanks for the assistance.
    Regards

    See the wiki how to ad new fields
    https://wiki.sdn.sap.com/wiki/display/ERPFI/SAPListViewer+Basics
    https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV

  • Depriciation key and useful life periods in asset master should in display mode only

    Hi all
    At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
    But
    When we click on Depreciation tab here the  Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
    Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
    User don’t have chance to modify this.

    Hi Anil,
    The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
    Regards
    Pankaj Pareek

  • Correcting useful life of an asset in previous year

    Hi, We have implemented SAP last year in April at one of our sites. At the time of initial upload of assets, we made a mistake and some of the assets were uploaded with incorrect useful life. Till date every month we were running depreciation based on incorrect useful life. F.Year was closed in Dec 2005. Now auditors have detected this mistake. How do we fix this? Any suggestions...

    hi sourabh
    u can reset the closed fiscal year through "Asset acountingperiod end closingreverse" using this function u can reopen the fiscal yera either for selected depriciation areas or for all dep.Be careful you should reopen a fiscal year only for certain depreciation areaas, and do adjustment postings in those only. u cannot use standard transaction types post to all depriciation areas. u have to define ur own transaction types.
    Change the field in asset master in last closed fiscal year. And start the depriciation program run in repeat run mode

  • Change the useful life of an asset

    Hi everyone,
    I'm using Oracle 11i Asset module. currently I have an asset whose useful life is 4 years. But we realise that this asset can only last for 3.5 years (3 years and 6 months).
    I tried to go into the Book of this asset and changed the life to 3.5 years. The system allows me to change the life year from 4 to 3 years but when want to change the life months from 0 to 6 months, the system doesn't allow.
    Can anyone of you help me?
    Thanks in advance

    Please check the Depreciation method setup.
    (Navigation: Setup-->Depreciation-->Methods)
    There should be an entry for life in years=3 and life in months=6 for that depreciation method.
    If it is not there, then system will not allow you to change the asset life.
    You need to make an entry in the depreciation methods screen (Navigation: Setup-->Depreciation-->Methods) before trying to change the asset life.
    Let me know if this helps.
    Thanks,
    Siva.

  • Asset report S_ALR_87011963 is not showing the asset values for perion 08

    Hi,
         The internal order number is 400011.The amount 38,300 were booked on this order. I have settled  38,050 into 7 assets hence the balance is 250 in this internal order (Work in progress 100050).
    When i check the Asset expolorer, there it is showing me this remaining value. But when i run any asset report, say Transaction code - S_ALR_87011963(Asset balances) with report date as 30/05/2008 for period 8, the asset 100050 is showing as NIL Value. But if i run it with date as 30/09/2008 for period 12, then it is showing the balance amount.Our fiscal year is frorm Oct- Sep.
    I don't understand why this difference is coming. It should show the balance 250 at the end of period 8.
    The last input on this internal order was in March 08 when I transfered most of the costs to the assets.So no reason to have a difference depending on the date of the report.
    The internal order 400011 is having status as Released at present.
    Can anyboday help me on this. Points will awarded.
    Earliest reply will be highly appreciated.
    Regards,
    Shree.j

    Hi Rau,
    Could you please me How to Upload the GL or Open Item Balances on Month to Month Basis? for this we still use FB01 for Initial Upload?
    My Client is giving the balance for last year Monthly with daily Transactions with past Posting dates obviously,do I need to Upload with same Posting dates or with Current Posting date?
    For reporting Purpose My Client would like to see Monthly Balances of Open items for Initial Upload,"is this same as Month to Month Upload you advised above"?
    What is the Difference b/w Month to Month ORr Just one Amount as total balance uploaded to SAP? which is Best Practice before Initial Upload?
    Thank you ,
    Paarthaa...

  • Problem in useful life of the asset?

    Hi,
    I don't know what and where it is going wrong so need your suggestion please:
    We have created one new asset class and trying to check dep. in testing server but system is calculated dep. with useful life as 10 years only for all the assets I have created.
    In OAYZ, I have just given the dep. key and the fields of useful life and period is blank for all the dep. areas. Also, tried with useful life 5 but result is same.
    In Asset Master, I have mentioned the useful life as 5 years for all the dep. area.
    The problem is system is system is showing the values based on useful life of 10 years, why I don't know what shall I do please suggest....
    I have checked it by creating some of other assets as well with different useful lives but the result is same.
    Please help!!!
    Thanks in advance....
    Regards
    Nitin

    Hi Nitin,
    If the depreciation is based on 10 years even if you have entered useful life 5 years then it means depreciation key is not configured as dep based on useful life.
    It seems depreciation is based on explicit percentage which must be 10% in your case.
    Check what dep key is assigned in Asset master and go to T code AFAMA, AFAMS for depreciation key settings.
    If you still have doubts of how to go about it then attach screenshots of AFAMA,AFAMS.
    Hope it solves.
    Regards,
    GSR

  • Dep .not calculating for useful life 3 years

    Hi all,
    I have created one dep.kep with 33.333% (For 3 years).
    when ian running AFAB the whole depreciation calculated in 3 moths not in 3 years.
    Eg:
    Cost- 120,000
    Legacy Dep:   34,740
    Net Value- 85,260
    Aquisation -19-May-09
    The system showing in aw01n -
    Planned amount 1    32876.00
    Planned amount 2    33973.00
    Planned amount 3    18411.00
    it is cleared in 3 months only but it should be clear in 3 years.
    please help me out.
    Krishna

    Hi Markus,
    I Have maintained this parameters in dep.key C09-33.333%
    Base method   -
    0014 (Ordinary: explicit Percentage (after end of life))
    Decl.-bal. method -
    001  (0.00x / 0.0000% / 0.0000%)
    Prd cont----
    001  (01/01/02/02)
    Multilev.meth.----
    C9  (33.333333% as per Co. Act - SLM)
    Here my client requirement is they are maintaining two business for  Asset Class (Office requiremnt) .
    The dep. rates are differ from each business i.e 16.21, and 33.33% with in the asset class.
    When iam created asset master under this asset class iam giving deferent rates.
    the problem is i have uploded my legacy data with 16.21(C03 Key). now iam going to find and update business wise rates in each asset master with in the asse class .
    before changing the dep.key it shows correct amount for each month , when iam changing this key this problem will occured.
    Regards,.
    Krishna
    Edited by: krishna reddy on Jul 23, 2010 11:13 AM
    Edited by: krishna reddy on Jul 23, 2010 11:15 AM

  • How i can take a field of report for use it in query?

    i hve a table where bills of customer are ready i simply take it on report by select statement.all bills are ready for print.now problem is that i need history of bills for every customer at it's own bill.when i give self join for history, it also add other customer history .there is any possible way that take customer id(report field) from report and search it's records . plzzzzzzzzzzzzzz

    i hve a table where bills of customer are ready i
    simply take it on report by select statement.all
    bills are ready for print.now problem is that i need
    history of bills for every customer at it's own
    bill.when i give self join for history, it also add
    other customer history .there is any possible way
    that take customer id(report field) from report and
    search it's records . plzzzzzzzzzzzzzzmay be you can use a child query and create a data link between
    the original query and child query on customer id column.
    I mean write a child query for searching records on customer id and then link
    this customer id with your already existing query. I think this will solve your problem

  • Fixed Assets Report on Acquisitions & Disposals

    Hi,
    Dear Friends could you please advise as to how can we generate the Fixed Assets Report for acquisitions and disposals of assets? Also we need to generate a report on Fixed Assets giving the complete details on opening balance, depreciation, acquisitions, disposals and closing balances.
    Your help would be much appreciated.
    Thanks in advance.
    Regards

    Hi,
    The following reports should meet your needs:
    Asset History Sheet - Tcode AR02 - opening balance, depreciation, acquisitions, disposals and closing balances
    Asset Acquisitions - Tcode AR05 - acquisitions
    Asset Retirements - Tcode AR06 - disposals
    Thanks,
    Chad

Maybe you are looking for