Asset reversal in AB08 ?

Dear All.
Experts.
My asset value date is 15.06.2009 and i want to reverse it for 30.06.2009 so which reversal reason should I take ?
Thanks in advance !
Regards ,
Sharvari.

Hi,
Will.
15.06.2009 is my asset value date and I want to reverse for after 15 to 30 June but when I am trying for 30the June with 01
reason the system says It is allowed only for date 16.06.2009 and when I am taking posting date 16.06.2009 I am getting
a following error :-
Balance for transaction type group 10 negative for the area 01.
And the explanation for error is as follows :-
Balance for transaction type group 10 negative for the area 01
Message no. AA629
Asset affected: 000700001117-0000
Diagnosis
With the transaction entered, the balance for the transactions in group
10 in area 01 will be negative in this fiscal year. However, the balance
of transaction type group 10, according to its definition, must be
positive in each fiscal year.
System Response
The system rejects this posting.
Procedure
Check the transaction type, the amount and the fiscal year in your
posting. If you want to post a credit memo to an acquisition from the
previous year, then use a transaction type for a retirement. If
necessary, you can change balance rules after talking with your SAP
consultant.
Can any one please tell me where do I need to configure ?
Thanks in advance !
Regards,
Sharvari.

Similar Messages

Problem in Asset reversal using AB08

Hi
We have a process where by all assets purchased are first put in CWIP account and later when put to use we capitalise. At that time i settle the cwip asset to normal asset.
In one case I need to reverse the settlement T code AB08. When I try to do this I get an error. The message says negative values not allowed in dep area 15.Message No AA617.
In the group asset used for Tax Dep the values are less than the revarsal I need to do.
I have not yet run depriciation for that period.
How do I reverse the asset ?
regards
sameer

Hi,
Could you please active 'allow negative value' setting in the dep. area cofiguration or in the relevant asset master data? Please also take a look at Note 141656 as additional information.
Regards
Ravinagh Boni
Rewards me if it useful

Asset Reversal AB08 and Issue in Dep run

Hi folks,
I have done an inter company asset transfer Using ABT1N -Asset got successfully transferred and after posting 2 depreciations runs, i have cancelled the asset transfer via AB08. The asset posted values tab is showing me a reversal of previous depreciations in the 3rd month but the depreciation run is throwing me an error for the same asset.
The error is as follows.
113 User is not authorised to post to company in nominal Message no. Z1144
(But I have the full authorization no issues found in su53)
Can someone please help..!
Regards,
KB

Hi,
Message is not a Standared one,
Please Check with ABAPer, There is any validations exist
Regards
Viswa

Asset reversal using FB08

I use ab01 to create some asset retirement, five assets sucessfully retired, now I use fb08 to reverse the documents.
is it the right procedure? I know we should use ab08, but Since we already use fb08 to reverse in production server.
any impact or any inconsistency it will create between asset and GL if using fb08 ? thanks

Hi,
There shouldn`t be any inconsistencies between your G/l and assets, but i remember that there was an issue with reversal of asset transactions from closed fiscal year - i think you are not able to do that from FB08.
In general it is recommended to carry out asset reversals from AB08.
KR,
Severina

Asset reversing and deletion

hii all,
i have uploaded asset through AS91 transfer date was 31.03.2007 . entry not posted to g/l.
Now i want to reverse the asset and delete.
but whenever i am reversing with T. code AB08 . its showing error
No asset line items exist for year 2007
Message no. AA042
please help me .
Search the forums

Hi,
write-up is used in R/3 to correct accumulated depreciation from former fiscal years. This can not be done when the depreciation was posted in the current fiscal year.
If you want to do a write-up, you could post an additional capitalisation, which is the write-up of the APC (see doumentation);    transaction type 400
Unplanned depreciation from the current year can not be reversed with write-up
The simplest way is to reverse with AB08 (the RAPOST2000 will post it) and to post the correct values;
Please review online documentation for further information (via the site help.sap.com, FI-AA - Other transactions during life of   an asset - Write-ups)
Regards Bernhard

Mass reversal using AB08 - BDC

Hi,
I had done a BDC for Mass reversal of fixed assets using transaction AB08 using sessions method.It gets processed succesfully in foreground,but return with errors when processed in background.
When done an analysis with logs,the sequence of screens thru foreground and background modes are different.
Could not find how the screen sequences goes in background mode.
Please reply.
Regards,
kavitha

Hi
pls make use of suitable BAPI
BAPI_ACC_BILLING_REV_CHECK
BAPI_ACC_BILLING_REV_POST
BAPI_ACC_GL_POSTING_REV_CHEC
BAPI_ACC_GL_POSTING_REV_POST
BAPI_ACC_GOODS_MOV_REV_CHECK
BAPI_ACC_GOODS_MOV_REV_POST
BAPI_ACC_INVOICE_REV_CHECK
BAPI_ACC_INVOICE_REV_POST

Asset Reversal

Hi Experts,
We are trying to reverse an asset in AB08 but the error below appeared:
Line item settlement is not possible for asset XXXX 7100002311 0
Message no. AW050
Diagnosis
You want to carry out line item settlement of an asset under construction. This transaction can only be carried out for assets with active line item management.
However, line item settlement is not active in the asset class of asset 7100002311 0 (company code XXXX).
If the asset is an asset under construction belonging to an investment measure, then you should carry out the settlement using order or project settlement.
Procedure
Check the setting for 'status of AuC' in the definition of the asset class.
Kidnly advise on what to do.
Thanks in advance.
Edited by: Ellicec on Jul 7, 2010 6:57 AM

Hi,
I have a similar problem to the ones described above. The asset settlement has already taken place, but to the AuC class, I need to get it to the correct class. The WBS elements are correct and I haven't had this problem before. After trying the reversal transaction AIST, I still get the same error mentioned above:
Line item settlement is not possible for asset 118 90000161 0
     Message no. AW050
Diagnosis
     You want to carry out line item settlement of an asset under
     construction. This transaction can only be carried out for assets with
     active line item management.
     However, line item settlement is not active in the asset class of asset
     90000161 0 (company code 118).
     If the asset is an asset under construction belonging to an investment
     measure, then you should carry out the settlement using order or project
     settlement.
Procedure
     Check the setting for 'status of AuC' in the definition of the asset
     class.
Have you any ideas?
Thanks,
edson32

Input Tax Reversal in AB08

Hi
I Created the Lease Master in ASO1 and then i did the Acquisition of this Lease. then i made the payment to this Lease assets vendor.
Now, due to reason i want to reverse the Asset( AB08).But i dont want to reverse the input tax entry.
So how can i prevent to Reversal of tax entry, that was created by system at the time of acquistion of assets.
Please help me.

Hi
Use TCode F-02 to post a new document to set a side the effect.
Srinivas

Asset Reverse

Dear All Experts,
I want to reverse my Posted Asset Document.
I am trying to reverse with Tcode AIST, After giving all inputs and executing it , givens error message ,
"Line item settlement is not possible for asset RI01 9900047 0 , Message No. Aw050".
I i use Tcode AB08 , Pressed on Reverse Document TAB , Suddenly it opens Actual Settelment Order screen. i.e KO88.
So i could not reverse Asset.
What can be the problem . How to reverse the document.
Where shall i check for this problem
Pl help me
Regards
Swati Shah

Hello Venkat,
Thanx
I tried ABSO with TType 105 and given other inputs . Now it's giving error
"Asset is investment measure, transaction type not allowed , Message No. Ak005"
Also tried with TType 160 , it's giving error,
":Acquisition value negative in area 01., Message No. AA617"
Pl suggest me something to solve this problem as i have another Asset Document also to reverse it.
Regards
Swati

WIP Asset reversal

Hello all,
I have query about Asset - WIP. I created one WIP asset in year 2006 and now I want to reverse the WIP asset due to the deal is cancelled. I yet not capitalised it.
what is the steps.
its urgent, Please.
Thanks

use MIGO ,
select return delivery . select material documnt and enter material document
select movement type and post the document
to issue sub contractor
go to MB1B, select movement type: 541
enter other details and post the document.

Unablet to revers the AUC Asset T.Cose AB08

Hi Team,
I went to Tcode AB08 and I filed the parameters and click on Reversal tab system shown CJ88 screen, I was test mode executed by processing type Automatic.
System gives message "Either the sender is already settled, or there is nothing to settle"
If i go and check WBS Element system status "SETC Settlement rule created"
Please suggest me how to reveres the AUC Settlement.
Regards,
Surendra

Hi
Go to CJ88 - Menu Settlement > Reverse
Br, Ajay M

Assets Reversal

Hi Experts,
We captilized a Assets in March 2011 and in April 2011 user reverse the asset transfer document on the march . Now in books Only depriciation amount of the March is there in AW01N. How i write off this depreciation and what is the impact of this. Please guide me.
Thanx in Advance

Hi Severina ,
Thanx for your quick Reply . After reversal assets document in April, user run the dep of April, may & june. now for the ordinary Depriciation amount shows in AW01n in unplanned is 157. now we have to write off this dep amount in the july. Now as per your guidence we use the T code ABZU and write off the amount in August.
what is the impact of this.
Edited by: Aadi sharma on Sep 12, 2011 2:35 PM

Reversal of asset document in different fiscal year

Hi Friends,
An asset was acquired in period 12, 2008 through t-code ABZO. No depreciation was charged in 2008 because the dep start date was 01.01.2009 in the asset master. Then depreciation was charged and posted for the asset in period 1 and 2 in 2009. Now we want to reverse the asset acquisition posting which was posted in 2008. While making the reversal through AB08, the error message is - Reversal not allowed in different fiscal year.
(1) Is there any way that the reversal can be done without opening FY 2008?
(2) What would be the impact on the dep which is posted in per 1 and 2 of 2009?
Thanks in advance for your much needed help !!!!

Hi,
Before doing this I would like to Understand the following:-
1. Where you have credited when you have debited the Asset ?
2. Reversal May be possible if you do the following;-
1. You will have to change the depreciation key as "000"
2. Repeat run for AFAB.
3. Reverse the Same Asset by ABZO by different Transaction type.
4. Otherwise Scrap the Asset.
regards
N. Kumar

Reset Manual depreciation for an asset

Hi Friends,
I have posted manual depreciation to an asset for the previous period and i closed the period.
Now i realized i have posted wrong amount for the the previous month. Now i want to make it Zero and i want to post it again.
Please suggest me the possible solutions to meet this requirement ASAP.
If you feel ABZU is the solution, please let me know how to post ABZU and required configuration for it.
Thanks
Kanna

Hi Srinivas,
I tried reverse through AB08 and getting the following error. (I posted unplanned depreciation for March period using Tran type 641, which i want to reverse)
No unique header information transferred into Accounting
Message no. RW001
Diagnosis
The interface into Accounting requires:
Header data
Item data
Currency data
The header data is missing, or several items were transferred.
System Response
Processing of the data in the Accounting interface is not possible.
Procedure
This is a system error of the application which was called up.
Please help .
Thanks
Kanna

Asset Posting date different in Book depreciation and IFRS depreciation.

Hi SAP gurus,
i have a problem in Asset Accounting.
The posting date of the asset is taken as 05.05.2008 in Book depreciation and it is taken as 28.02.2008 in IFRS books..
How do I change the posting date to 05.05.2008 from 28.02.2008 in IFRS books.
I have tried to reverse the transaction in IFRS but these transactions have no effect on Fixed assets register.
Please help me.
Thanks
Hari

Hi Hari
Did u try to reverse thru FB08 or AB08
All Asset accounting documents posted which needs to be reversed should be reversed with AB08 not FB08.
Secondly I believe IFRS is one of your dep area. Did you do a transfer or acqusition and what is the relation of IFRS dep area to Book dep area?
Sanjeev

Asset reversal in AB08 ?

Similar Messages

Maybe you are looking for