Asset Scrapping ..Defalut CO Account Assignment

Dear All,
1 ) When scrapping an Asset using "Tr Code ABAVN",  i want the Cost Center assigned in the Asset Master to be chosen as the Additional CO Account Assignment for the Scrap Account(this account is created as a Cost Element).
2 ) When Cost Center in the Asset master is picked automatically during Depreciation run for Posting Depreciation, why is the same logic not working during Scrapping. Is there any further customizing setting required to achieve  this.
Regards
NMR

Dear Bernhard,
Thank you very much. The Note you have suggested was very helpful.
Best Regards
NMR

Similar Messages

  • Asset PO with Multiple account assignment..!!!

    Hi all ,
    i am creating asset PO with multiple account assignment and having pricing condition 5.5% Octroi..
    While doing the MIRO , system should distrubuted octorie amount  to all the assets ( load to asset value )
    But system is not capture the octorie amount in MIRO...
    Any customization required for multiple account assignment in case of Asset PO ..??
    Please help.

    Hi,
    In MIRO, item detail screen, you check for a button which allows apportionment of the value.
    Regards
    Aloysius

  • Account assignment for group asset is different from that in asset

    Dear experts,
    I have creted one main asset . and i have created group asset. and my main asset class and group asset class are both are different.If i continue that error assets are shoud be craeted .but the depreciation key and usefull life and ordinary depreciation will going and it's showing grey.
    My question at the time of assighning the group asset for the particular assets the below error is comming.
    Account assignment for group asset is different from that in asset
    Message no. AA810
    Diagnosis
    The account allocation 14000 of the group asset 140000001 0 is different from account allocation 1000 of the asset.
    System Response
    This error needs to be corrected for balance sheet valuation (usually determined in depreciation area 01). For all other depreciation areas, this is only a warning you should check.
    Procedure
    Check your entry. When an individual asset has a different account assignment than the group asset, it is not possible to reconcile the individual asset to the group asset in reporting by means of accounts.
    kindly help on this issue
    regards
    venkataswamy

    Hi sudhakar
    Thanks for your reply
    1) for example i have buliding asset class and i have one group asset class.under the building asset account determination i have assighned the gl a/c for both b/s and book deprecitaion
    In groups asset class also i have done same things. i have craeted asset under building asset class and created one asset under group assets.
    then assighned the group asset to main assets. the error is comming like this Account assignment for group asset is different from that in asset
    I have serched in sdn forum and service .sap.com . they are saying you can use same gl a/c for both asset class.for depreciation .i have tried this scenario. still i am getting the same error and same problem.
    The most important thing is we are working on ECC 6 versions
    sap note 76186.
    Kindly help me
    Regards
    venkataswamy
    Edited by: venkataswamy bathini on Jul 6, 2009 9:22 AM

  • Exchange rate problem between GR&IR for PO with account assignment category

    ear SAP experts.
    We have used expense puchase order through account assignment category.
    the cost object include cost center,sale order,order.because we don’t use Fixed assets module in SAP,when purchase fixed assets,we also use account assignment category but no need to fill assets number(Not use account assignment category A).
    the processing in current system when there is exchange rate difference between GR&IR  as follows.
    purchase order Currency :USD  company code currency:HKD
    example 1-- when something purchased into expense account,
    Good receipt  (1USD=7.75HKD)
    Dr :expense account  100USD    775HKD
      Cr: GR/IR        100USD    775HKD
    Invoice receipt
    Dr : GR/IR         100USD    775HKD
        Expense account            25HKD
    CR: Vendor        100USD    800HKD
    Example 2-- when something purchased into Fixed assets account,
    purchase order :USD  company code currency:HKD
    Good receipt on Oct .01. 2007  (1USD=7.75HKD)
    Dr :Fixed assets account  100USD    775HKD
      Cr: GR/IR           100USD    775HKD
    Invoice receipt on Dec.01.2007  (1USD= 8HKD)
    Dr: GR/IR              100USD     775HKD
       Fixed assets account                25HKD
      Cr: Vendor            100USD     780HKD     
    The fixed assets is depreciated from Nov,2007.
    There is one problem that after the fixed assets is depreciated, the value for the fixed assets is added , the finance clerk have to adjust the added value from fixed assets account to Exchange Difference-Gain/Loss account by manual.
    Our problem is
    How to configure in order to make  the exchage rate difference into Exchange Difference-Gain/Loss account for purchase order with account assignment category,not the original assigned account in purchase order item.
    Many thanks
    Fanny

    Hi Fanny
    Even though the question is bit unclear, I guess you are looking for the T-Code OBYC. Use transaction key KDM for configuring the exchange gain/loss
    S Jayaram

  • SRM - creation of new account assignment

    Hello,
    I just created a new account assignment that combines an asset and a cost center.
    My client wants to be able to purchase products as a asset and use the cost center to the workflow approval of the shopping cart.
    The customizing I did in MM was:
    The same customizing was done for item category O, G and P.
    The customizing I did in SRM was:
    I also added the attribute Asset/Cost center in account assignment in PPOMA for my user.
    Two questions:
    1 - When using this new account assignment, the button to create a new asset is not showing. Is it only possible to create new assets if you choose account assignment asset?
    2 - When using this new account assignment, no documents were created(purchase order). I got the error message Process schema not found.
    Did I miss any step in the customizing?
    Do I need to do something else when creating a new account assignment?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin,
    Did you do the following set up / security role assignment Assigning to Assets - Account Assignment - SAP Library as mentioned in the above link.
    Please do the same you should able to see Create Asset button.
    Thank you
    Ritesh

  • Valuated GR not allowed in case of multiple account assignment

    Hi Friends,
    While creating Asset PO with multiple account assignment categories from SC
    i received the following error message in RZ20.
    PO 0030065837: No instance of object type PurchaseOrder has been created. External reference:
    PurchOrder 0030065837: Purchase order still contains faulty items
    PO 0030065837: Valuated GR not allowed in case of multiple accoun t assignment
    PurchOrder 0030065837: Transfer failed
    Now the PO status is error in process
    Can any one help on this issue...
    Thank You
    Shrinivas

    Hi shrinivas,
    When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is the standard feature of SAP
    can you tell me whether you have that option of selecting or deselecting the GR nonvaluated in PO creation(EBP).If it is there falg it and reprocess the Sc
    hope this will help
    regards
    subbu

  • Account assignment not updated in SRM's shopping cart when changes are made in ERP's PO - Classic Scenario

    Hello!
    A customer has classic scenario and creates shopping carts using only cost center as account assignments in SRM.
    When the PO is created in ERP's backend, sometimes a purchaser changes the account assignment to Asset("A").
    The account assignment changed in ERP is not reflecting in the shopping cart and the result is that the requester can not make a goods receipt in SRM because the account assignment does not match the PO.
    Does anybody knows what shall be done so the account assignment in SRM is updated according to ERP?
    Shall I use BBP_DOC_CHANGE_BADI?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin,
    As Mithun rightly said, the changes made to the PO will not be reflected in the SC not just in Classic but in Extended Classic Scenario as well.
    We create a Confirmation against a PO and not against SC, so it is not necessary that the SC needs to be updated.
    Is the system allowing the creation of the Confirmation or is the error coming up when the confirmation is being posted on the backend system?
    Can you check the SLG1 in SRM for the error that it is triggering when the PO is changed?
    Regards

  • ZEXKN - Sequence number of account assignment

    Hi,
    I am creating assets through ME21N when account assignment cat is 'A'.
    I had line item 01 with quantity 1000. And I need to create 1000 assets means each quantity will have 1 asset.
    But here the ZEXKN sequence number limit is 00 to 99 means field length is 2.
    How can I create 1000 assets and link them to PO and PO item.
    Is there any alternate solutions for this scenarion. Please advice.
    Thanks,
    Deepak.
    Edited by: KDeepak on Apr 15, 2010 1:04 PM

    Sorry, but there is no alternatives in standard. You would need to create a modification!
    Blaz

  • ERROR WHILE POSTING MIRO FOR MULTIPLE ACCOUNT ASSIGNMENT (ASSET)

    Hi Guys,
    We created  a PO for asset with multiple account assignment. And we immediately do IR instead of GR.
    While doing IR it is giving error
    1) Quantity delivered is zero - Warning message
    2) Account 245350 requires a Transaction Type or is Invalid - Error message
    what may be the problem. how can we eliminate and post it
    Regards
    palani

    Hi,
    I would assume the G/L account you used was not properly set up.  Did you get the same problem if you try to change to another G/L account?  Perhaps, get your FI specialist to look into this G/L account-related error and verify it.
    Cheers,
    HT

  • Account assignment not possible (Asset not assigned to a business area)

    HI
    While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
    I have correctly created asset master and assigned Business area and Cost centre.
    And i am not getting any problem in another company code for same asset class.
    Please suggest
    Bhanu Prakash

    Hello
    Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
    Check the info on the link please
    Reg
    assign points if useful

  • ASSET CODE FOR ACCOUNT ASSIGNMENT CATEGORY IN PURCHASE ORDER.

    Sir,
    greetings!!!
    here is a procedure we follow...
    We create asset code(AS01) for capital items. when createing Capital purchase order for the item, we give A as asset for assignment category which then asks for asset code in acc assignment cat tab. this is a general process.
    Now problem is that I want the field of account assignment category in PO item tab to be automatically populated with the asset code at the time when I put the material and plant i.e capital item.
    Is it possible.
    What is happening is that the user while creating PO is not at all selecting correct asset code with reference to capital item, that has a huge effect on asset accounting..
    please provide

    Hello,
    As such there is no standard thing available, but there is one thing that you can do, that is
    Create a PO document type for Assets and for that document type allow only account assignment A and delete rest including standard account assignment that is blank.
    This way, once a person choose the document type for Assets, he will have to give the account assignment A.
    Regards
    Prabhjot Singh

  • Add field 'asset' in sales order line item account assignment tab

    Hi,
    I would like to add the following field: 'asset' in sales order line item account assignment tab.
    I can enter order, or wbs, but not Asset.
    How can I make this field visable?
    Anybody?
    thanks,
    klundert
    Edited by: Eric Van Zundert on Oct 30, 2010 8:43 AM

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • Cost center not committed on shopping cart,  for account assign cat "Asset"

    Hello,
    We are implementing extended classic scenario in SRM 5.0 with ECC 6.0 backend.
    While creating a shopping cart in SRM, in the cost assignment tab when we select an account assignment category as “Asset", and then try to enter a value in the cost center in the basic details of cost assignment, it is not getting committed to shopping cart screen. The cost center field value is lost when we move to the next screen for ordering the shopping cart. For the asset related purchases, we are using main account assignment category as "asset" and it also requires cost center, because while the asset master record is being created in R/3 for these items,it requires the cost center. We also using internal order. So for the account assignment category "Asset", the other account assignment fields that can be entered are cost center, internal order and one custom field called "project code".
    We have created this user-defined field in the cost assignment tab in the shopping cart, purchase order and confirmation documents in SRM in accordance with the OSS note 672960. We have implemented BBP_CUF_BADI_2 & BBP_DOC_CHANGE_BADI, BBP_DOC_CHECK_BADI for the shopping cart object.
    Can someone please help me with this issue?
    Thanks,
    Krupa

    thanks Ramakrishna and Yann for your prompt reply..
    Ramakrisha,
      I know that for assets, SC requires asset number and G/L is automatically derived from the corresponding asset class from the backend. In our case, we are putting dummy asset number in shopping cart and this asset number exists in R/3. But we are not generating asset creation during shopping cart creation but we are doing it during the PO creation in doc change badi. During this asset generation you also need cost center on the asset record. So we have added cost center field for Asset account assignment category and I can see it in the details of account assignment. But when I enter this cost center on shopping cart, it doesnot get committed, it disappears when I order the shopping cart.
    Does anybody have any clue why this might be happening?
    Thanks,
    Krupa

  • How to link Purchase Order using account assignment category "F"* to asset

    Hello,
    I'd like to know how to link Purchase Order, using account assignment category "F" to asset .
    When I enter asset no. in my ANEK table, po no(ebeln) and po item(ebelp) field is blank.
    whether every line item in a Purchase order have differrent asset.
    can anybody give me the link between asset and materal no?
    Regards,
    Rachel

    Hi Rachel,
    Your message is a little bit confusing. There is no link between the asset and material number. If you want to post your purchase order, using account assignment F - that is internal order - you may do it. Futher, you can settle the postings from this order to asset.
    You can read more here:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/4f/71e7cd448011d189f00000e81ddfac/frameset.htm
    Regards,
    Eli

  • Purchase order of a service with account assignment to fixed asset

    We entry a service PO with asset accounting. When we select  PO in Ml81n, does not working.
    Anybody nows if there is something to configure to use in that way.?
    Thanks

    hi
    check with account assignment network and settle to WBS and then from WBS to AUC and create final asset and post the value to fixed asset

Maybe you are looking for

  • Empty report with pagination,  rows not displayed

    Dear HTML DB Team, We have in our reports the next error: An empty report with pagination appears , no rows not displayed The test case to reproduce the error: 1. Create "SQL report" with next report attributes in "Layout and Pagination"      a. Row

  • Can we build equity and acquire assets without banks while rebuilding credit??

    Hi.Thank you for taking a look at my post.  I hope we can help each other.  I have 3 goals for this post. 1 - to reach out to this community for opinions, leads, and hopefully contact info for private lenders who really do lend based on the asset and

  • Program not responding

    I started having problems recently with Photoshop Elements 8. It would freeze up, and lately, when I try to change the font, it says 'Photoshop not responding'. Today. I purchased Elements 10, installed, and have the same problems. Any ideas would be

  • PDF names on IPad

    Can I change the name of a PDF saved on my IPad?

  • Messages that I delete keep being re-downloaded. How do I make them go away for good?

    I just started using Thunderbird. No problem with downloading and installing the program, setting up my 2 email accounts to be viewed as a unified folder - all went well. Then messages were downloaded dating back more than a year. OK - I sifted throu