Asset Settlement You cannot use this transaction type to post to this asset

Hi All,
A CAPEX is created. An Asset is created. The asset is assigned to CAPEX under settlement rule. Out of several purchases made against the CAPEX, settlement for 2 months are carried out and the value of CAPEX was transferred to Asset.
However, during the current month, while doing the settlement, the system is giving the following error :-
"You cannot use this transaction type to post to this asset"
Message no. AA 834
The details diagnosis of the error message is
"The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class PM-501 (chart of depreciation DEIL). You cannot post to this asset class using the transaction type entered"
Request to please let me know what could be the possible reasons for system giving such message adn how to rectify it.
Regards
Santosh

Hi Santosh,
I would suggest that you Check the <b>asset number</b> you entered. You may want to allow posting to this asset class using this transaction type group. If this is not the case, then, you may have to ask the business to reverse the initial posting causing this error and re-post with the correct transaction type that is allowed for this asset class.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Similar Messages

You cannot use this transaction type to post to this asset Message no. AA83

< MODERATOR: Message locked. Please post this message in the [Asset Accounting forum|SAP ERP Financials - Asset Accounting;. >
Hi,
I am settling credit values [-ve values] from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
These assets belongs to Investment Measure. For few assets I am getting below error and
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
I know normally we do this way
During charging
Dr Exp A/c WBS name
Cr B.S A/c
During settlement
Cr Exp A/c WBS name
Dr AuC GL A/c
But we have situation that during settlement, we are doing reverse
ie., Cr AuC GL A/c
Dr Exp A/c WBS Name
These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
Regards,
Sridhar

Hi,
Please check the SAP note 1091728 for this.
Regards

You cannot use this transaction type to post to this asset Message no.AA834

Hi,
I am settling credit values -ve values from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
These assets belongs to Investment Measure. For few assets I am getting below error and
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
I know normally we do this way
During charging
Dr Exp A/c WBS name
Cr B.S A/c
During settlement
Cr Exp A/c WBS name
Dr AuC GL A/c
But we have situation that during settlement, we are doing reverse
ie., Cr AuC GL A/c
Dr Exp A/c WBS Name
These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
Regards,
Sridhar

When you have an investment order/WBS create from there the AUC. You collect the cost on the AUC. Final you fill in the settlement rule the final asset in (from a normal asset class) and then you transfer the costs to the final asset.
In the IO or WBS should be assigened a investment profile and the asset class AUC should be set-up correct
Search on this forum for more information or read the SAP help

ERROR: You cannot use this transaction type to post to this asset M.NO.AA83

Dear Team,
I am encountering a problem regarding the downpayment request.While doing the downpayment request with the main asset instead of AUC. System is showing the above mentioned error.For this i have done the configuration changes in OAYB.It is working fine with DEV server.When i am testeing the same in QAS i am facing the problem.Tables of asset accounting and configuration everything is same for the both .But I am unable to trace out y this has happend.Please advise me how to proceed further.Thanks for the considertion.
Regards,
Suma.

Hello,
Please see if the following note helps you out.
Note 1091728 - Down payment posted to fixed asset despite message AA 834
Regards,
Ravi

You cannot use approp. request type 1 without a project profile

Dear All,
What should i do. I tried to create appropriation request. Error message appears
You cannot use approp. request type 1 without a project profile
Message no. AO257
Please help.
Cheers,
Nies

You create Apr request which can either get replaced with Internal Order or Project/WBS after approving the request.
For this to happen, you need to have assigned either order type/project profile in the Apr request type.
Config Node where you maintain this is below:
Investment Management>Appropriation Requests>Master Data>Control Data>Maintain Appropriation Request Types
Maintain the profile and set the indicator WBS element as Allowed measure.
Better refer the Best Practice Configuration Guide available for Investment Management on SAP help portal.
Regards
Sreenivas

10.5.2: You cannot use the application "System preferences.app" with...

Hello
after (successfully) updating from 10.5.1 to 10.5.2, the System Preferences.app cannot be started. Either the application does not start (a silent error) or there is a message "You cannot use the application "System preferences.app" with this version of MacOS X." The version is 10.5.2, according to "About this Mac", while the application version is 3.5. The same happens when I attempt to open "Time machine preferences" using the new menu/icon on the bar.
Any help is appreciated.
Thanks in advance,
Marinho.

Thanks, I did that, but it didn't solve the problem.
By the way, the application version (of System preferences.app) remained the same (old one). Then I removed the application to Trash (meaning to restore it later if required) and applied the update again (and a third time), but then a new System preferences.app was not installed and the older one has disappeared from the trash! What a mess this update turns out to be...
Marinho.

GB won't open- This is what I get... Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser

Path does not exist: /Library/Audio/Apple Loops Index st: /Library/Audio/Apple Loops Index w/out this directory you cannot use the Loop Browser. Then I get this message...
Instrument Library Invalid
GarageBand Ecpects a valid instrument foledr in /Libraty/Application Support/GarageBand
Please choose a valid instrument Library folder or quit and re-install GB
Any solutions?

Is this a new installation of GarageBand or has it worked before on the same computer?
Or have you transferrred your GarageBand from a different computer?
The error message is saying, that your GarageBand installation is incomplete. There are essential foldrs missing in your system library.
Check, if indeed both folders are missing or if only the permissions are set incorrectly.
Your system library (the folder "System" directly on your system drive) should have the following folders inside the folder "Audio", and they need to be readable by the system and by administrators.
And in the folder /Library/Application Support there should be the Instrument Library.
If these folders do not exist (or no longer exist), restore them from your backup- If your GarageBand version is a new installation, the application may not hve been downloaded or installed completely, then reinstall GarageBand.
What is your GarageBAnd version, and how did you install it originally?
Regards
Léonie

"You cannot use this version of the application Mail with this version...

I recently needed to replace my hard drive and now when I try to open the Mail application I get the following message: "You cannot use this version of the application Mail with this version of Mac OS X."
Any help is appreciated.

ANSWERING MY OWN POST:
I have tried reinstalling Mail from my Snow Leopard upgrade disk directly and tried it using Pacifist. Neither worked because both simply reinstalled version 4.0. Fortunately, I have a MacBook Pro and it has version 4.1. I copied this directly, which was not ideal (it was quite confused about my mailboxes), but it worked.
The problem is that +Software Update+ did not detect the old version of Mail and Apple does not provide a direct way (that I could find) of downloading the latest version. Each time I downloaded Mail from Apple, it was version 4.0.

Trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this pro

trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.

Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem.

Acrobat 9 Pro Error 148:3 You cannot use this product at this time

Am running XP Pro SP3 with Acrobat 9.0 Pro Extended. Until I installed Comodo antivirus software yesterday, Acrobat worked fine. Now when I open Acrobat I get an error message similar to this: “You cannot use this product at this time. You must repair this problem by uninstalling and then reinstalling this product or contact your IT . . . (148:3).” Then when I click OK, Acrobat shuts down.
I’ve tried the Licensing fixes found at http://kb2.adobe.com/cps/405/kb405970.html but fixes didn’t work. I uninstalled and reinstalled. Now when I try to install updates, it looks like it’s installing but at the end the installation says it failed.
Any ideas on how to resolve my problem? Thank-you.

Bill, you're correct and thanks for your help. In my particular case, Acrobat Pro was working fine until I upgraded Comodo (from the green/white shield to the red shield). Thnking it was an Acrobat problem, I uninstalled Acrobat Pro and reinstalled Acrobat Pro with Comodo turned off. Still got the "148:3" error msg. Solution, I uninstalled Comodo and restarted the computer. Then updated Acrobat Pro, there were two updates. Restarted computer. Then installed Comodo. Everything now works fine.

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 20

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?

Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

You cannot use this version of the application iCa with this version of Mac OS x

Bought a macbook pro from a friend- running 10.5.8. Could not find iCal in the Apps folder. Researched on line and it sounded like I needed to reinstall it from the disk. I did from the original os x disk and when I tried to open it, received the following message:
you cannot use this version of the application iCa with this version of Mac OS x
I have two disk for version 10.2. Neither disk offers "optional installs" but the second has "AdditionalApplications.pkg" but doen not install iCal at all. Any help would be greatly appreciated.

Thanks. That brings up a whole new question- can I run 10.6 on my macbook? The specs are below:
Model Name:
MacBook Pro 15"
Model Identifier:
MacBookPro1,1
Processor Name:
Intel Core Duo
Processor Speed:
2 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
2 MB
Memory:
2 GB
Was told at Apple Store that it would run terribly slow.

Error on ALL CS3 Products: "You cannot use this product at this time..."

Hello all,
I woke up this morning and attempted to launch Adobe Photoshop CS3. I received the following error:
"You cannot use this product at this time. You must repair the problem by uninstalling..."
At the same time I tried opening Photoshop, my Antivirus application (ESET NOD 32 Antivirus) indicated that it found a "threat" named AdobeLM_libFNP.dll.
I then tried opening DreamWeaver CS3. Same issue. Also got another threat notification from ESET NOD 32.
Non CS3 products (Photoshop CS2, Illustrator 10) do not appear to be affected.
I've already referred to the TechNote for this issue. I've tried all of the solutions, except for uninstalling and reinstalling the software.
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
I really don't have the time today to uninstall and reinstall all of my Adobe apps. I'm hoping there is another solution.
I'm running a complete system/virus scan right now and its coming up with threats left and right... all of them are Adobe-related w/file names like "AdobeDeviceCentralAll1.cab"
Can anyone help?

>At the same time I tried opening Photoshop, my Antivirus application (ESET NOD 32 Antivirus) indicated that it found a "threat" named AdobeLM_libFNP.dll.
if you're SURE that's a virus, you'll have to reinstall the full app. my guess is you AV app is a little too aggressive in it's scanning and it stopping the adobe license manager (AdobeLM) from running so you can't run your apps.
having heard of adobe, but never heard of est nod, i'd trust adobe 1st... try another virus scanner. for example avg (free or paid) or kaspersky, panda, mcaffe, symantec, etc.
hmm googling i found a pcweek review. they say it's great at catching "unknown" viruses (proactive protection) but "less than stellar" at stopping and disenfecting lots of other malware. so it may be thinking because of the behaviour of the ALM, nod32 thinks it's caught an unknown virus.
http://www.pcworld.com/article/id,130906/article.html
>When it comes to proactive protection, Eset's NOD32 was the hands-down winner in "Virus Stoppers," our eight-program antivirus roundup. In our tests, it caught 79 percent of unknown malware samples when using one-month-old signature files. The next-closest program, BitDefender Antivirus 10, came in with a distant 61 percent
>NOD32's overall malware detection rate wasn't stellar, however. When pitted against AV-Test.org's nearly 900,000-strong "zoo" of Trojans, viruses, and other malware, NOD32 caught only 90 percent, compared to the 96 percent rate of top performers Kaspersky Anti-Virus 6, Symantec Norton AntiVirus 2007, and BitDefender Antivirus 10. It fared surprisingly poorly with 32-bit Windows viruses (approximately 1 in 11 samples in the zoo), catching only 73 percent.

"You cannot use this version of the application Mail..."

"You cannot use this version of the application Mail with this version of Mac OS X"
I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you

Dummerkopf wrote:
"You cannot use this version of the application Mail with this version of Mac OS X"
I recently updated to 10.5.8 because my iTunes needed the new Safari and that needed 10.5.8
After doing this, my mail no longer works and gives me the message above. What I don't understand is why is there an update that is required for one this but doesn't allow you to run another? Am I missing a Mail update to allow it to run on 10.5.8???
I've already went through apple care and they walked me through running an Archival Install to get my computer back to its original settings, but that means I can't use Safari 4 and iTunes 9...
Is there a way to have it all, Mail, 10.5.8, Safari 4 and iTunes 9? Please help, my mail is the only way I can check my work e-mail and it's not something I can just go without. Thank you
See this thread from someone with a similar problem:
http://discussions.apple.com/message.jspa?messageID=10327281
Since you've restored your computer you won't be able to check the version number of your Mail application, but the question about moving Mail may still apply.

Asset Settlement You cannot use this transaction type to post to this asset

Similar Messages

Maybe you are looking for