Asset tr date error coming again

HI all
when iam trying to create a legacy asset using tcode as91, error message displaying like----
Current fiscal year 2005 has to be after transfer date 31.03.2007
Message no. AY252
even i tried tcodes OAAQ/OAAR/AJAB/AJRW----still i am getting the same error message
so what i need to do now, help me regarding ASAP

The capitalisation date entered in you legacy asset can only be before and up to this date enterd in (Specify Transfer Date/Last Closed Fiscal Year) and cannnot be later than this date.
As for values if you are taking on historical values i.e. APC, Accumulated Depreciation, and Ordinary Depreciation Posted then follow logic:
APC = Historical Cost
Accumulated Depreciation = Up 31 Dec 2006 (End of prior year)
Ordinary Depreciation posted = 1. Either Let SAP caclulate and post the depreciation for the year it will do a lump sum catch up in your next deprection run. or Enter the deprectaion posted in your legacy system in the field in AS91 - Takeover values up to the last period but then make a setting in:
Asset Accounting-> Asset Data Transfer->Parameters for Data Transfer-> Date Specifications->Specify Last Period Posted in Prv.System (Transf.During FY)
and enter the last period depreciation was run in your legacy system and SAP will post only the depreciation for the next period based on you depreciation key config
Hope this helps
Siva

Similar Messages

Error when importing Asset Legacy Data

Hi Gurus,
I get an error when I use LSMW and T.Code AS91 to import Asset Legacy Data...
"AS91 S 00 347 Field ANW1-KNAFA . is not an input field".
Is there a way to change that field to input? Currently that field is greyed... If I do manual upload in the foreground, then it gives an warning but creates the Asset, but if we do it automatic in the background it fails.
Can you help me on this.
Thanks for you time.
regards,
Raj

Hi Linda,
Thanks for your reply.
We are doing a mid year take over and the last depreciation was done in Dec 2006.
I am using LSMW with T.code AS91. Can you let me know where is this "transactional date" that we have to enter.
I have seen that the master data gets uploaded, but with error in the last screen where the deprecitation is inputed, the error that I have explained in my post. Can you help me on that?
Thanks.
regards,
Raj

Import fixed asset data, error occur.

Dear all,
I imported fixed asset master data as following:
FA21600111;602;Dell电脑;OPTIPLEX 380DT ;2010-03-26;;;;G300662098;非生产设备;104;;3179;1;3179;100;2010-04-01;60;60;LINP;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
SB1 prompted system message: Import end; Number of successfully imported:0; Number of processed assets:1
and I open the log file, it says:
2010-05-06 12:12:43.420 0 BA ER CBAMasterDataTransfer::CBAMasterDataTransfer Life Parameter: FA21600111;602;Dell电脑;OPTIPLEX 380DT ;2010-03-26;;;;G300662098;非生产设备;104;;3179;1;3179;100;2010-04-01;60;60;LINP;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
what's that means?
and I found that if the asset's Capitalization Date is current year, It can't be imported and show the message in the log file, why?

Hi,
You may check this thread first:
How can we import Fixed asset of the current year ?
Thanks,
Gordon

Upgrade the DB from 2007A to 8.8 PL 10- Error in Fixed Assets Master Data

Dear Expert,
we r using smoothly Fixed Assets Add-on in 2007A environment, Now we are upgrade to SAP B1 8.8 SP00 PL10. When i view the Fixed Assets Master Data by choosing from List Its shows all of my master data list, but when i select any of them system shown nothing in FA Master Data form , please guide
Tahir

Hi,
I think the addon is corrupted. have you reinstall B1 addon ? if you have reinstalled but it is still as same, I suggest to upgrade the B1 version and the addon to the latest i.e. SAp B1 8.8 SP00 PL16. You can also log a message to SAP support but test this case first in the SAP B1 8.8 SP00 PL16 environment.
JimM

Creation of asset master data

hi sap gurus,
i have a problem regarding saving of asset master data.
while creating asset master data,-in time dependent tab the cost center it is comming correctly.but when i am saving it is giving ,the following error:
you cannot save the asset(correct depreciation error)
Diagnosis: you have choosen the function save.the system found an
internal problem when calculating depreciation for a check document.
sys responce:The asset cannot be created
procedure:1 check the error from depreciation calculation by
performing the function "Test doc.'again.
2 if you cannot correct the error ,contact your sys specialist.you
must then cancel your current processing.
please help me regarding the problem......

hi
check your depreciation area settings for the asset class

Date Transformation - "Unparseable date error"

Hi,
I am getting an "Unparseable date error", my source date format (from IDOC) is 27102006, in the target format it should be along with the time stamp like 27102006132010. I tried using the date transformation function and I am getting the following error:
RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /SiebelMessage/ListOfAssetManagement/ListOfAssetMgmt-Asset/AssetMgmt-Asset/InstallDate. The message is: Unparseable date: "27102006" .
solicit ur inputs!!!
Thanks & Regards
Viji

Hi,
Check your java code in Message Mapping, Check out whether you have declared the data typr exactly and again import the java code and activate the objects.
Regards
Agasthuri Doss

Internal Server error coming when accessing MSDN forum

Hi.
I keep getting below error when accessing forum or refreshing forum pages. I can see from
this thread that such issue was there couple of years back
This error is coming again. And is very frequent but when same page is refreshed couple of times page loads properly.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I am getting Internal Server Error very frequently since the last two days. Almost 1 refresh on 2 ends with the Internal Server Error message.
I am using Google Chrome (Up-to-date) and I am connecting from France. Hope that helps.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Data error (cyclic redundancy check) when installing windows xp..

hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!

I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?

Fixed asset Master Data import

Please can anyone help me resolve this error messages when importing Fixed asset master data
"Net book value of asset must be greater or equals to zero"
Am using SAP Business one version 9.0 pl9

Hi Bright,
Please check below link.
Error message during Import of Fixed Assets after Upgrade of SAP 9.0 to PL10
Hope this help
Regards::::
Atul Chakraborty

Data not coming in cube...

Hi,
I have loaded data in ODS but when loading the data from this ODS to cube it is not fetching any data in the cube. I have created the DTP to transfer data from ODS. but no data is coming in cube.
Any mistake I have to correct? or any setting I have to check?
Please let me know.
Thanks,
Jeetu

Hi Ravi,
I presed execute button from DTP in schedule tab.
It is showing DTP as green , no error is there.
But no records are loaded from ODS through DTP.
Thanks,
jeetu

Stale data error while submitting the form(before that opening the popup )

I am using OAURL to open a pop-up in my oaf page
passing my page to this class.And at the time of loading the base page
the pop up window url is like this
OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=10
now i click on the link to open the pop-up
its opening the pop-up.
Closing that pop-up.
Saving the details entered in the base page.
Now it is executing again from the processRequest() of base page
now the URL like this...
OA.jsp?page=/myfolder/webui/NumberColumnsPG&retainAM=Y&"+"fndOAJSPinEmbeddedMode=Y&addBreadCrumb=S&_ti=55514227&oapc=11
Now i am getting stale data error
The number of displayed records, 2, exceeds the actual number of records, 1, in view object SampleAM.SampleVO1. Some of the displayed records may have been deleted.
Here i am observing that the parameter OAPC is different in these two URLs.
can you please tell me how to come out of this error while i am submitting the base page.
Thanks

Hi Pratap,
Thanks for your information.But there i didn't get any information related to my issue. can you please tell me a way to proceed further in order to solve this issue.
Thanks
Satya

Delivery schedule dates are coming in Past dates

Hi Friends,
In the Scheduling Agreements the delivery schedule dates are coming in the past dates even tough the scheduling agreements are having new schedules. There is also open quantities there for the scheduling agreements.
please kindly explain me what is the delivery schedule date in Scheduling Agreement.
Thanks in advance.
Regards,
Kannan M

Hi Khan,
Just check this thease might be the reasons to get correct the delivery schedule.
To access a delivery schedule, mark a scheduling agreement item and choose Goto ® Item ® .
The following data is displayed in the delivery schedule tabstrip:
·        Delivery schedule number and date
·        A wide range of standard cumulative quantities
·        Delivery information
To display deliveries for the delivery schedule, choose Deliveries on the delivery schedule tabstrip.
In scheduling agreements involving external agents, the system displays deliveries made to the customer by external agents as consignment issues.
·        Correction delivery information
To display or create correction deliveries, choose Corr. delivery on the delivery schedule tabstrip.
·        An analysis function
·        Information at a glance
To display a summary of delivery schedule data, choose Short disp. on the delivery schedule tabstrip.
·        Schedule lines
Choose DlvSch.Hdr on the delivery schedule tabstrip to access the delivery schedule header. The following data is displayed here:
·        Information on quantities received by the customer
·        Information on the customer fiscal year and cumulative quantities reset due to a year change
·        A wide range of cumulative go-ahead quantities
·        Notes on the delivery schedule
Correcting Cumulative Delivered Quantities
Prerequisites
You correct cumulative quantities in scheduling agreements:
·        In case of returns
·        When there has been a processing error
·        When there has been a year change
·        When you are transferring initial quantities from a legacy system into the SAP System
To do this, you create a correction delivery within the delivery schedule itself. This delivery is not relevant for requirements planning, shipping, goods issue, or billing.
Correct cumulative quantities only when the customer has not posted goods receipt.
Procedure
To create a correction delivery (document type LFKO):
       1.      Choose Corr. delivery on the delivery scheduletabstrip.
The system displays a dialog box in which you enter a:
-         Correction delivery date
For help on deciding where you want to position the correction delivery, choose Display. The system lists delivery dates in chronological order.
-         Correction quantity
Enter a negative correction quantity by placing a minus sign after the quantity.
       2.      Choose Enter and save the scheduling agreement.
Result
When you save the correction delivery, the system updates the cumulative quantities in the delivery schedule.
To display correction deliveries, choose Deliveries on the delivery schedule tabstrip, or Environment ® Display document flow.
Example
Your customer returns 200 pieces of material from a delivery made on 7/10 because of damage during transport. Several other deliveries have been made before you prepare the correction delivery, so you view a list and choose an appropriate date. In this case you decide on 7/14 because it occurs after the delivery on 7/10 and before the delivery on 7/15.
Regards,
Murthy V.N

Stale data error while updating record

Hi,
While updating page getting below error.
++++++++++++++++++
Error
Unable to perform transaction on the record.
Cause: The record contains stale data. The record has been modified by another user.
Action: Cancel the transaction and re-query the record to get the new data.
++++++++++++++++++
- In page navigation, the setForwardURL is done without retaining the AM
- There is no other user trying to change the values that are just created.
- Doing pageContext.releaseRootApplicationModule(); before commit.
- ObjectVersionNumber attribute of entity object, check the Change Indicator checkbox for this attribute.
Still it is NOT working getting same error.
Any idea, why this error coming.
Thanks,
Srikanth

OA Framework updates the ObjectVersionNumber attribute in the generic OAEntityImpl Java class. That is, the createObjectVersionNumber(), and updateObjectVersionNumber() methods perform automatic initialization and update of these values.
Read more in Dev Guide
Thanks
--Anil

Stale Data Error - iProcurement Receiving Page

Hi,
I created a button on the Standard iProc Receving Page result table region. When user hit on button it popup window using javascript:window.open(<Page info & Properties>). I am using popwindow to capture some details, and saving into database. But when i am closing and coming back to my main page(Recieiving Page) and navigating to next page it is giving me the Stale Data Error.
Interstingly this error does not come when the search is done using reqeustor or if i dont click on button for popup window. All other cases gives me this error. One info about this page is the VO which is showing in error should not execute all the time. There are lot of VO's which execute based on search fields entered. The VO belowi s one of them when reqeustor info is given in search fields.
Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example).
Cause:
The number of displayed records, 25, exceeds the actual number of records, 0, in view object ReceiveItemsAM.ReceiveMyItemsVO. Some of the displayed records may have been deleted.
Any pointers will be appreciated.
Thanks & Regards,
Venkata.

Hi
Generally Oracle provide a global variable hr_general.g_data_migrator_mode and passing this as 'Y' should update who columns and object version number. But I am not sure it is available for vacancy APIs or not. I remember a similar kind of bug logged long time back.
Regards
Gaurav

AUC Asset and depreciation error in Area 20

Hi All,
I have a problem with AUC settlement, there is negative values in my AUC (Area 01, no values in Area 20) and when I am settle that to Asset master I got the error message Negative values not allowed in Area 01. So I have selected negative values allowed check box for Area 1 and Area 20 in AUC asset master data, now the settlement is fine and have settled that.
Now the main problem I am facing is, here am seeing the balance of negative value on AUC asset under the Area 20 and also the total negative value is picking as Accumulated depreciation.
Could you one provide the ideas how the nagative balace went in Area 20 and why it caluculated depreciation even though the depreciation key is 0000.
Thanks
Sreenivas

Hai Qian,
You can maintain the Net book value and special depreciationall values allowed in OADB t.code or whtever fields u want the maintain the All values allowed
Regards
Madhu I

Asset tr date error coming again

Similar Messages

Maybe you are looking for