Asset Transfer - problems with incorrect depreciation values/period

Hi,
I'm trying to do an asset transfer between two company codes with transaction ABT1N using the gross method.
My problem is that when the asset is transferred the number of depreciation periods restart in the receiving company but with the net value from the sending company.
Example:
Company 1100:
Asset 1:
Aquired: january 2005
Value: 10 000 $
Depreciation time: 5 year x 12 months = 60 periods
Transfer to company 1200 on july 2007...
Depreciation in 1100 so far = 5 000 $
Net value to be transferred to CoCode 1200: 5 000 $
Here comes the problem, when I look at the depreciation time in company 1200 after the transfer, I see that the system now wants to depreciate the net value of 5 000 $ on another 60 periods period. This means that the asset will have a lifetime of 7,5 years in total instead of 5 years.
What I want to do is that after the transfer the depreciation should only by the the number of periods that is left from the original depreciation start in company 1100. This means that after the transfer there should only be 30 depreciation periods left in company 1200 on the transferred asset.
Thanks for response! I will add a lot of points to thoose that provides me with solution solving info.
Best regards
Carl-Johan

Carl,
This is where you can influence the fileds to be transfered in the transfer variant [1-Gross in your case].
Asset Accounting>Transactions>Intercompany Asset Transfers>Automatic Intercompany Asset Transfers>Define Transfer Variants-->Specify Transfer of Fields (for New Asset in Target CoCd)
Select the variant 1-Gross method and then click on the Depreciation area on the left bar. The system will display the all the Depreciation area for the Chart of Depr in question. Here for each depreciation area you can dictate what values from the old asset need to be trf to the new asset.
In your case, the system is not transfering the remaining useful life. Precisely you need to transfer the field group 19-Expired useful life and 20-Expired life in periods.
That should do the needful for you.
Have a nice day.
Vishal Thakur.

Similar Messages

Asset transfer .. Special depreciation values

Hello friends,
I was doing an asset transfer from one company code to another company code.. both belong to same Chart of depr. everything looks fine all APC, ordinary depr values got transfered to the new asset but the special depreciation values for the depreciation area ( 10 federal tax acrs macrs) is not getting transfered. Is there any setting that I am missing in the config.
Any help is appreciated
Thanks

Can Any one help me regarding this issue

Asset Transfer Report with matching new asset number

Hi,
During the past week, our company transferred over 2000 assets from several companies to one company. As a result of the transfer, the tax depreciation keys and tax depreciation life weren't carried over to the new assets. I am wondering if anyone here know how can I generate a asset transfer report with one column listing all transferred out assets and another column listing matching transferred in assets? I used ZFI_INTERCOASTR- Intercompany Asset Transfer, it gave me a transfer report with all the transfer in and transfer out in one column.
Edited by: Peggy Wang on Nov 24, 2009 3:40 PM

Hi,
you can create yourself an ABAP Query on logical database ADA. In node ANEK you have per each (transfer) transaction the information from which asset the transfer was done. With the ABAP Query you can configure your output list completely flexible.
Regards,
Markus

Feature NUMAP was called with incorrect parameter value PME15

hi
i am getting following error while running transaction pb10.
Feature NUMAP was called with incorrect parameter value PME15
please help me out.
regards
archana

this might be occur in case there is mismatch of the fields of decision being used in feature maintenance.
check the feature and the return value , wether the return value is correct or not
goto PE03->NUMAP check the return value and check wether the return was configured in number ranges
eg: if the return value is 01 go to your config and check the number range has been set for "01"
you gave return value as "01" and the number range has not been set in configuaration for "01" this kind of error s may occur.
Edited by: Piscian . on Jul 18, 2011 11:54 AM

I have a problem with Incorrect payment Who Can I Turn to off this payment

I have a problem with Incorrect payment Who Can I Turn to off this payment
about receipt No.111032735561

These are the steps I performed on my own system many months ago. I could not view PDF files in Firefox with both Adobe Reader and Foxit installed.
#Close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#If you have not already done so, uninstall Adobe Reader 9.4.5 using Windows Start > Settings > Control Panel > Add or Remove Programs, click on the item, click Remove. You may need to restart your system.
#Open Foxit in your programs list Windows Start > Programs
#*on the Foxit menu, click Tools > Preferences
#*click File Associations and be sure "Display PDF in browser" is checked then click "Make Default PDF Viewer" then click OK
#*close Foxit Reader (File > Exit)
#Start Firefox
#*Open the Applications panel (Tools > Options > Applications '''''OR''''' Firefox button > Options > Options > Applications)
#*type '''pdf''' in the search box; you should see "Foxit Reader PDF document"
#*in Action column, click the down arrow at the far right end
#*choose "Use Foxit Reader plugin for Mozilla (in Firefox)'
#**if the full name does not display, place the cursor over the item to see the full name in a tooltip box
#Test on a pdf file from the internet
#*If there is no toolbar at the top of the PDF display in the tab (just a blue strip), tap the F8 key to get the Basic toolbar, or right-click the blue strip at the top to display/not display other toolbars by clicking on them (checked=display; un-checked=do not display)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Problem with Posted Depreciation

Hi All...!
I am having a little doubt regarding the posted depreciation.
My company used one asset #1000 and its Gross book value is Rs.27,000 (Asset Value Date 18-04-2006) and on the basis of the useful life time, the depreciation comes around Rs.5400 for one year.
Now we want to transfer the value of asset #1000 to new asset #2000 (Asset Value Date 18-04-2006).
When we tried to use T-code ABUMN and simulate the transaction
the system shows the value of the new asset is Rs.27,450( Rs.27000+one month depreciation Rs.450 of the asset#1000)
I request you that can you help me to resolve the issue that we want to keep the Gross book Value of new asset# 2000 as $ 27,000 and write up the old asset posted depreciation amount.
Thanks with Regd,
Bala

Hi Andreas Mann
Thank you for your information and could you please advise me how to do
because the old asset detail- Asset#1000
Gross Book value: 27,000
Asset Value Date: 18.04.2006
How can we do the changes the Asset Value Date - Asset# 2000
can you kindly assist me?
Thanks with regards,
Bala

Overdrive transfer problems with new ipad and old ipod

installed overdrive for ipad on pc (win 7) and ipad2 app. downloaded book from library site and it allows 3 transfers to devices.
hit "transfer" and get error message that overdrive is not able to connect to my device(s) yet itunes shows my device and syncs my other items.
tried the manually manage idea in the help threads. i use firefox. i have installed all of the many itunes/ipad/ipod updates, tried reinstalls, reboots and new attitude...but not getting anywhere.
help needed -thanks

Quote
Originally posted by Wonkanoby
1 the board will not accept nor load a drive with old chipsets drivers on it
do a clean install or over install
2 you have to set fsb to 166 with the xp 2500 in the bios
3 if your using an old psu i dout its going to be good enough
I am having a simular problem with system hanging up and getting blue screen from time to time.Running msi K7N2 Delta- L board with corsair value select VS1GBKIT400 PC3200 1024MB 2x64Mx64 2x184 DIMM,Leaktek winfast A250 ti4600 video card,antec 350w ps,xp home loaded on 30 gig wd 7200 drive and clean install.Not looking to overclock just want stable setup as about all I do is play with PSP7 and run driving games.Think I do not have bios settings correct as I am still a beginner.Any help or thoughts appriciated.
Thanks Bruce

.MSG files. Problem with getting requested values from crawled properites

Hi
I have a lot of msg files on my file server. I use SharePoint Enterprise Serach engine to crawl all these MSGs.
I would like to get extra managed properties out of these files. I am most interested in getting Mail:5(text) / Mail:12(Date and Time) / Mail:53(Date and Time) from MAIL category in Managed Properties.
This thread is very similar to one already posted by SpinnerUp:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/82d69df0-5cb2-4e51-a485-34209e111f4b/problem-with-crawling-msg-files-doesnt-seem-to-return-requested-values-from-crawled-property
Please be aware that I do not use Public Folders. These MSGs are exproted from Outlook and are stored on File Server not Exchange.
I tried to link Crawled Properties to new property however I cannot get any results back.
Thank you for you help.
Regards, Marcin (Please mark as helpful or answered if it helps)

Thank you for your replay.
However I am not keen to write custom connector at this stage.
Is it possible to simply get "Subject", "Sent", "Received" info from msg file and then map it to managed properties.
Does SharePoint create any crawled properties which contain information about let's say "Subject" which then can be used to create managed properties?
I tried playing with "MAIL" properties however I cannot get them to work. I guess this is because the file is a msg file rather than mail which is stored in Exchange Public Folder.
Regards, Marcin (Please mark as helpful or answered if it helps)

Problem with mouse-over value on a column chart (by Series)

Hi.
First of all thanks for any offered tip.
I am having a problem with a column chart.
When I move the mouse over a column it should show a small pop-up (or tip) with the column name (series name) and the value (series value). The problem is that it displays an extra '1' just like the following:
SeriesName
1
X.XXX
How can I remove the extra '1' and only show the name and the value ?
The data is populated by series (manually added).
Mihai.

Hi,
Thanks for the tip Shanthakumar KA.
Yes. It looks like the '1' is coming from the X Axis labels. The chart that I have built does not require any labels on the X Axis, so this was not set (X-Axis labels: Empty). I tried setting this to an empty cell, but the '1' still appears in the mouse-over tip.
It is very weird. If I leave the X-Axis labels empty, I still get the '1' displayed which is very annoing.
Are there any solutions for this except the re-building the tip with a label a.k.a. '[customize the mouse over values|http://xcelsiusandme.blogspot.com/2009/07/xm-sample-7-customizing-mouse-over.html].'
Regards,
Mihai.

Problem with getting actual value in Row row=iter.getCurrentRow();

hi,
the use case is as follows:
in master-details, on detail table there are 2 columns with checkbox and username.
when user clicks checks, the username text item is populated with current user value in respective row.
<af:column sortProperty="#{bindings.DcaRegisterLinesV1.hints.Selected.name}" filterable="true"
sortable="true" headerText="#{bindings.DcaRegisterLinesV1.hints.Selected.label}" id="c1"
width="30">
<af:selectBooleanCheckbox value="#{row.bindings.Selected.inputValue}"
label="#{row.bindings.Selected.label}" autoSubmit="true"
valueChangeListener="#{registerBean.socSelectedChangeListener}"
shortDesc="#{bindings.DcaRegisterLinesV1.hints.Selected.tooltip}" id="sbc1">

</af:selectBooleanCheckbox>
</af:column>
<af:column headerText="#{bindings.DcaRegisterLinesV1.hints.ProcessedUser.label}" id="c17" width="80"
sortProperty="#{bindings.DcaRegisterLinesV1.hints.ProcessedUser.name}" filterable="true"
sortable="true">
<af:outputText value="#{row.ProcessedUser}" id="ot17"/>
</af:column>
the bean's code is below:
public void socSelectedChangeListener(ValueChangeEvent valueChangeEvent) {
BindingContainer dcbindings = getBindings();
AttributeBinding at;
DCBindingContainer dc=(DCBindingContainer) dcbindings;
DCIteratorBinding iter=dc.findIteratorBinding("DcaRegisterLinesV1Iterator");
BindingContext bindingctx = BindingContext.getCurrent();
BindingContainer bindings = (BindingContainer)bindingctx.getCurrentBindingsEntry();
Row row=iter.getCurrentRow();
String AgreementId=row.getAttribute("AgreementId").toString();
System.out.println(" AgreementId="+AgreementId);
it always prints the first row's values.
even though i click on different rows on the table prior clicking checkbox.
what's wrong? seems like the model is not refreshed because what? autosubmit=true ?..
how can i get the actual row values?
please help
the

Hi,
lets clean up your code first:
public void socSelectedChangeListener(ValueChangeEvent valueChangeEvent) {
BindingContainer dcbindings = getBindings();
//AttributeBinding at;
DCBindingContainer dc=(DCBindingContainer) dcbindings;
DCIteratorBinding iter=dc.findIteratorBinding("DcaRegisterLinesV1Iterator");
//BindingContext bindingctx = BindingContext.getCurrent();
//BindingContainer bindings = (BindingContainer)bindingctx.getCurrentBindingsEntry();
Row row=iter.getCurrentRow();
String AgreementId=row.getAttribute("AgreementId").toString();
System.out.println(" AgreementId="+AgreementId);No to the possible problem. Check if the table SelectListener is set. It should have an EL string that ends with ".makeCurrent". This however makes only sense for single row select cases.
Frank

Problem with field-symbol values not updating

H i ,
      I have following piece of code :
Assigning Dynamic Table to Field Symbol
    ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
*   Creating Structure for dynamic table
    CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
*   Creating line type for the Dynamic Values
    ASSIGN gs_dyn_line->* TO <gs_line>.
*   Populating values in the dynamic table
    LOOP AT ist_pwcl_main INTO wa_pwcl_main.
      ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
   1   IF sy-subrc EQ 0.
   2        <gs_field> = wa_pwcl_main-werks.
   3      ENDIF.
   5 IF <gs_field> IS ASSIGNED.
   6     <gs_field> = wa_pwcl_main-vbeln.
      ENDIF.
7 IF <gs_field> IS ASSIGNED.
8 <gs_field> = wa_pwcl_main-posnr.
      ENDIF.
   IF <gs_field> IS ASSIGNED.
        <gs_field> = wa_pwcl_main-quant.
      ENDIF.
on debugging at line 2 <gs_filed> contains the value of werks .
but at line 6 <gs_field> contains value of vbeln as 0 and at 8 of posnr as 0 .
What can be the problem ? Other values are getting assigned properly .
Plz help ...
Regards .

Hi,
Assigning Dynamic Table to Field Symbol
    ASSIGN ist_dyn_table->* TO <gs_dyn_table>.
Creating Structure for dynamic table
    CREATE DATA gs_dyn_line LIKE LINE OF <gs_dyn_table>.
Creating line type for the Dynamic Values
    ASSIGN gs_dyn_line->* TO <gs_line>.
Populating values in the dynamic table
    LOOP AT ist_pwcl_main INTO wa_pwcl_main.
      ASSIGN COMPONENT gc_fld_werks OF STRUCTURE <gs_line> TO <gs_field>.
   1   IF sy-subrc EQ 0.
   2        <gs_field> = wa_pwcl_main-werks.
   3      ENDIF.
   5 IF <gs_field> IS ASSIGNED.
   6     <gs_field> = wa_pwcl_main-vbeln.
      ENDIF.
7 IF <gs_field> IS ASSIGNED.
8 <gs_field> = wa_pwcl_main-posnr.
      ENDIF.
   IF <gs_field> IS ASSIGNED.
        <gs_field> = wa_pwcl_main-quant.
      ENDIF.
Based on your coding above, <gs_field> has been assigned with data type 'WERKS' (i'd assume component gc_fld_werks found from structure <gs_line> is a plant typed), which is a CHAR(4) data type.
Meaning, if <gs_field> is assigned with Plant type value, e.g. <gs_field> = '1000', field symbol <gs_field> will contain 4 character only.
At line 6, if wa_pwcl_main-vbeln = '0000201000', <gs_field> is only capturing '0000' only. This is also happened to line 8.
However, it looks like that <gs_field> is getting over-write if ASSIGNED statement returns SY-SUBRC = 0.
Hope this helps.
Regards,
Patrick

Bluetooth File Transfer Problem with Video Clips -...

Hello!
I am posting this problem even though a similar one is claimed to be solved ...
I have a similar Problem with BT video clip file transfer in my E5-00 as someone had earlier with music files (SW up to date). Except that in this case the files are unique video clips received from one of the latest Samsung Android phones via Bluetooth (don't ask me which format).
Tried the obvious first, using Windows File Manager over USB. Even Windows Search could not locate the files, not even using wildcards.
Also tried using Ovi Suite Syncronisation, but the files did not appear in either Photos/Videos or Messages (even though the files are in the SMS Inbox - does not make sense why).
The problem in applying the solution approach presented here for Music seems to be that the files cannot be played at all in my E5-00's. Therefore I don't get as far as to the menu where the E5 would ask whether or not the files should be saved or not.
So far I have not been able to connect to an old bluetooth laptop (Windows XP) so that the Bluetooth Exchange would connect let alone seen whether the BTexchange works in this case or not.
Is there any other chance of getting to the files through the directory structure? If so, please give me the (Windows) directory path? Any other advice than switching to Android?

Unfortunately I have reached an impasse. If I touch a video clip (in organizer) the system crashes. I mean locked up cold. I'm not sure what has caused this but I do know that I will not be able to communicate correctly or sufficiently with you in order for you to help me out.
I've found PS and Premier to be very difficult to work with. Very, very frustrating. Photography, both still and video, is not as enjoyable as it once was.
Again, I very much appreciate your initial help and if I get to a point where I've improved my situation ... I'll reach out again. Thanks

Problem with cheking a # value in IF statement

Hi ,
        I have to check value of
val_tab = node->get_value( ).
     do .
end do .
if my val_tab contains '#' or '##' a DO statement below it shoul not get executed . i tried IF with string operations but
its not working . it does not check it for '#' value . Plz help how can i check it .

I told you this is because this # mark only appreas to be so, if you write
data: my_char type string value '#'.
if my_char = value_tab(1).
endif.
and debug the code you would see that it my-char has different hex representation than your val_tab(1) .
It is happening if SAP can't encode this char correctly (as this is one of special character) and presents you with the replacement, which is #. Nevetherless the real value behind it is not what we can see on the screen, it is determined by its hex(binary) representation.
Use my above code replacing
do 31 times.
xstr = x = sy-index. "convert to hex value and then to xstring
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
    EXPORTING
     in_xstring          = xstr
   IMPORTING
     OUT_STRING          = out_str. "here you have string representation of # with correct hex value behind it
if out_str = val_tab(1) . "now only compare these two characters
   "....here # was found it means it is one of a special character
endif.
enddo.
Regards
Marcin

Problem with Selection screen values of an authorization variable

hi Gurus,
I have an authorization variable for Division in my queries....Now whenever a user tries to run the query...a list of divisions is available to him....All divisions for which he/she has proper roles assigned.
Now the problem is that these values are not restricted to the ones relevant to that query (namely the multi provider)
Eg. for a Flowers Query (divisions relevant to Flowers only) all the divisions (including the ones for Vegetables, Crops etc.) are also visible only because these roles are also assigned to the same user. This needs to be avoided.
In a nutshell....
Is their any way by which i can restrict the number of values popping up for an authorization variable in the selection screen, to only those values which are relevant to the info-provider on which the queries are based ???

hi Deepu,
I did go through that SAP note. I just have one concern regarding that. The check at the Info provider level is clear enough and i already have that in place. Now there are 2 more checks required a) at the info object level and b) at the BEX designer level.
Are all three checks required???
and also how do you place the check at the BEX level??? i could not quite figure that one out...
Any inputs would be welcome.
Thanks,
Nikhil

Apple ID Problem with Incorrect username/password setup

Hello all,
I'm trying to help my sister-in-law with a problem with her Login details for Apple Store. She has no skills in this department, so she asked a friend (?!) to help her. Somehow things were done that allowed her to establish an account, altho frankly I am not sure how it was activated. She used her old email address at that time, which she has in the meantime replaced with a new address from another ISP. I managed to establish an ID using the new address, but she has an iPad registered under her old Apple ID.
Nothing was written down, and nowhere can I find an 8 letter password with the Capital Letter and Number system as required by Apple. The help questions which were established when compiling the old address can't be answered, because she didn't write down either the data, or the answer. From all this, you can judge that I'm frustrated at trying to do more for her.
I can't understand how, or if, one could cancel the old details in favor of the new. Or whether it might work if I "Restore" the iPad according to the instructions in iTunes when the iPad is attached, and try to register it under the new user/password I established.
We live very remotely, so popping into a local store for help is not possible. I've tried, with my limited knowledge, everything I can, but I've got nowhere. So, can any kind soul who might have had to go done this route, or who might have a possible clue to what I could do, perhaps help me out? I'll bet its staring me in the face, but as an old guy, my instincts aren't as sharp as they were.
Very many thanks to anyome reading this post, who might be able to give me some assistance.
Barrie

Hi barrie,
Well, sounds like you have half the problem fixed. But for the original account, even though you can't remember the answers to the original security questions, you CAN contact Apple Support to have them reset them for you. Once they are reset, also reset the password to whatever the password on the new account is so they are seamless.
Also, on both accounts be sure to set up a RESCUE EMAIL ADDRESS with the Security Questions. This will prevent any issues down the road with forgotton passwords/security questions, and will allow you to recover in a much easier way than this has been.
But again, for the original account. You need to do the following:
1. Contact Apple Support, provide them with the Original Apple ID, and let them know that you need to have the Security Questions reset.
2. Once that is done, set up new Security Questions for that old Apple ID as well as a RESCUE EMAIL ADDRESS with those new Secuity Questions
3. Reset the Password on that Old ID to be the same as the one on the new ID (and keep it consistent - any time you change the new one, change the old one)
4. Sign into iTunes one last time with that old ID and use up your $15
Now, forget the old ID altogether except when you need to update the password to match the new one. Once you have done your final redemption, only the new Apple ID should exist for you. All apps and music purchased in the same iTunes Library with either ID will be able to be loaded onto the iPad. When one of the apps needs to be updated, it may display the old ID, or it may display the new ID - if the password is the same, it won't matter which is displayed for the update. Put in the password, and it will update.
Whatever you do - Don't delete the apps purchased with the old ID. Once you get it squared away it will just be like a "phantom" id in the backround. Not really used, but still associated with the apps purchased under it. As long as they all live in the same iTunes Library, the ID they were purchased under is irrelevant. The only thing that matters after that is the password (as explained above) for any updates.
For the iPads themselves, make sure that the new Apple ID is showing for the iCloud account. This is what ties the Apple ID being used to do purchases via the iPad.
I hope the info I have provided has helped, and that your trip to Canberra will be a success. Sounds like an all-around nightmare, and you have been a very patient and sweet brother-in-law to stick with this whole thing.
Best of luck, and do let me know how it all turns out! I would love a line from you as the adventure progresses!!!
Cheers,
GB

Asset Transfer - problems with incorrect depreciation values/period

Similar Messages

Maybe you are looking for