Asset Under Construction Functional Inputs

Hello,
I need some inputs in Asset flow.
I need to moel a planning cube on an existing Asset cube.
I only need to load asset numbers which are still under construction to the planning cube not the ones which are settled.
So, can anyone help how to identify Asset numbers which are still under construction?
I read somewhere, it depends on the Transaction types. But I am not very sure.
Any help would be appreciated.
Thanks.

Hi,
Try to compare and analyse the data for distinction between asset under construction and assets settled.
Try to analyse the characteristics use in provider and compare 2 set of data(under construction and settled).Hope this helps
https://help.sap.com/saphelp_46c/helpdata/en/4f/71e7cd448011d189f00000e81ddfac/content.htm
Regards,
Akshay

Similar Messages

Capitalize borrowing costs to asset under construction u2013 IAS23

Dear experts,
According to IAS 23 we are required to calculate interest on capital invested in an asset under construction.
Borrowing costs that are directly attributable to the acquisition, construction or production of a qualifying asset form part of the cost of that asset. Where funds are borrowed specifically, costs eligible for capitalization are the actual costs incurred less any income earned on the temporary investment of such borrowings. Where funds are part of a general pool, the eligible amount is determined by applying a capitalization rate to the expenditure on that asset. The capitalization rate will be the weighted average of the borrowing costs applicable to the general pool. The amount of borrowing costs that an entity capitalizes during a period shall not exceed the amount of borrowing costs it incurred during that period.
Detail scenario
The construction of a qualifying asset is controlled by an investment measures that are managed as projects - WBS elements and settled to an asset under construction periodically. The calculated interest shall update only the determine depreciation area set on the interest profile (OPIB).
The borrowing operations are managed by money market transaction on TRM (Prod. Category 550 Interest rate instrument).
Using the interest calculation function (CJZ2 - Individual Processing or CJZ1 - Collective Processing) we encountered several problems/ restrictions.
1 u2013 When funds are borrowed specifically to a qualifying asset for example, an interest rate instrument as a money market transaction on TRM should be capitalized according to the actual incurred borrowing cost and not by a capitalization rate. How to assign the value to the WBS element?
2 u2013 When funds are part of a general pool, although we can calculate and update the effective interest rate for each borrowing transaction (TMEZ) how to determine the weighted average capitalization rate by company code and define it on the Reference Interest Rates (OBAC) to be used in the interest calculation?
3 u2013 Even if the capitalization rate is defined and updated manually in the reference interest rate for the interest calculation, how to limit the amount of borrowing costs that will be capitalized during the period? The calculated interest in period shall not exceed the amount of borrowing costs it incurred during that period.
Is there any other functionality to support interest calculation and capitalization of borrowing costs to asset under construction according to IAS23 requirements?
Please advice.

Hi,
The interest rates for capitalization and for appropriation can be collected in separate cost centers and apportioned to WBS . If you incur interests at the group level,then using accrual apportion the relevant portion to the respective C/Codes.
For arriving the weighted average i assume you take the planned interest.For restricting the planned to the actual ones use the " Budget Manager" functionality,give the actual value,set zero tolerance.This will help restricting to the actuals.
Hope this helps.
Regards
Ramesh

Settlement of an Internal Order to Asset Under Construction

We are running SAP 4.7 and Iam trying to settle an Internal order to AUC and I get the following error
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 18000 (chart of depreciation SEEF). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
**Please take note that the costs which have come on the internal oder are through GR( Goods receipt) and not down payment. Also note that last month, the order settled without any problems!**

Hi,
thanks for your answer.
I want to do that because of some french tax rules.
These rules say that goods, hours or services produced internally for the contruction of an asset can be "delivered" to itself.
So you can register output tax based on the value produced but you have also to register input tax for the same amount.
Finally the balance for VAT amount is 0.
I was interested to know if that was possible to automize. If not, there is still the possibility to make a separate postings at month end or year end.
Best Regards

Steps for completing Asset under Construction

hi,
i have created the AUC asset class with line settlement checked.
will somebody be kind enough to show me the futher steps involved in customization along with postings and settlement procedure....
regards
sayeed

Hi,
You can manage the asset under construction in the system in two different ways, depending on the types of functions that you need. The asset under construction can be either a normal asset record, or a master record with line item management. As a result, the transfer from the asset under construction to completed fixed assets can be handled in one of two ways:
·        Summary transfer from a normal asset master record to the receiver assets (transaction type 348/349)
·        Line item settlement of an asset under construction that has line item management
The Investment Management (IM) component is recommended for handling large-scale capital investments. Using the IM component, you can manage a capital investment in parallel: for financial accounting purposes as an asset under construction, and for controlling purposes as an internal order or project. For more information, see the documentation for the Investment Management component.
Assets under Construction Without Line Item Management
The procedure corresponds to the procedure for the transfer between two assets within the same company code (see Posting the Splitting or Moving of an Asset). Before carrying out a full transfer of an asset under construction, you have to reverse any down payments that were posted in the current fiscal year. Down payments are ignored for a partial transfer.
Special transaction types for the transfer of assets under construction allow for transfers to be displayed in the asset history sheet as acquisitions to fixed assets.
Assets under Construction with Line Item Management
In the FI-AA component, you can accumulate costs under purely technical aspects in an asset under construction. You do not need to consider the later creation of fixed assets at this point. During the construction phase, you can accumulate all acquisitions for an investment in a single asset. These acquisitions include
·        External activity (acquisition from vendor)
·        Internal activity (internal order)
·        Stock material (withdrawal from warehouse)
in a single asset. When using this 'collective management' of assets under construction, it is possible to manage the individual acquisitions as open items over the course of several fiscal years. At completion, the line items must be cleared and then distributed to the various receivers. The system activates open item management when an asset under construction is created, if you set the corresponding indicator in the asset class. In addition, you have to assign a settlement profile to the company codes involved, in Customizing for Asset Accounting, in order for the line item settlement to work (see Define Settlement Profile in the Implementation Guide). The main function of the settlement profile is to specify the allowed receivers (such as, assets or cost centers).
Hope this helps you. Let me know if you need any other information.
Rgds
Manish

Assign value to asset under construction

Hi Sirs,
I would like to know what i have to do to solve the problem with value for asset under construction. When I create asset with tr. AS91 in area for Takeover values, the field for ***.acquis.val. is not active.
Thank you in advance.
Regards,
Dani

Hi Dani
I assume that you have maintained the takeover date and period for last depreciation posted in the old system. Apart from this you have to make sure that the capitalisation date in asset master should be prior to takeover date, In order for system to recognize that asset is a takeover asset this is very important. when all the input fields are greyed , this means system does not determine it to be an old asset which it derives from cap date.
Rgds,
Zub

Gather all cost for asset under construction

Hi everybody
Please tell me the way to gather all cost for asset under construction. You can detail as good as possible.
Thanks so much
Ngocpt

Dear Ngocpt,
Internal order is functionality from CO. U can use it for the purpose of collating all the cost. U can also do cost planning in internal orders. This helps u to analyse bet planned & actual cost.
Create IO thru KO01. Once created use it in ur transactions. In your case u can use it in posting any document to AUC.
Also as I mentioned in my previous post that IO can posted with real values and statis tical values. If you want to post statistical vales only then check the box statis tical order in control data.
Whenever passing an entry put ur IO number in "order" field.
Hope this is of use to u.
Regards,
Ajay

Steps to create Asset under construction

Hi All,
Can any one pls explain me whats diff b/w normal asset class and AUC, and even provide me the steps to create AUC. (what are the GL acc assignments to be done)
It's urgent. pls help me...
thanks,
sravanthi

Dear sravanthi
For Normal Asset, We create an Asset in AS01 and we assign Depreciation area and depreciation is calculated.
For Asset under construction, SAP Provides a Seperate Asset class in As01 and no depreciation is calculated on this asset.
Fixed asset that is in the process of being completed at the time the balance sheet is being produced.
Assets under construction are shown as a separate balance sheet item for the enterprise. Assets under construction can be managed for bookkeeping purposes in the FI-AA component using asset master records in special asset classes.
To also benefit from management accounting functions that go beyond the asset accounting level, you can use capital investment measures in the Investment Management (IM) component. Investment measures can be managed in the form of internal orders or projects
For Steps to create AUC Refer to SAP Best Practices
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
Please let me know if you need more information.
Assign points if useful.
Regards
MSReddy

Asset under construction-urgent

Dear all,
When I create a asset under construction, the following error is coming;
Make an entry in all required fields
Message no. 00055
Diagnosis
You have attempted to update data or start an action. However, not all required information was specified.
System response
The system could not execute the action.
Procedure
Enter all required information. Fields in which you must enter data are prefilled with a question mark ("?") by the system. If the current screen contains tabs, check all tabs to make sure you have filled in all required fields. Then restart the action.
Please help me solve this problem
will award good points
Thanks in advance
Regards,
A.Anandarajan

Hi,
That error exist if you don't input the mandatory fields.
When you save the asset, the error "Fill in all required fields" will appear and system will tell you what field that you have to fill. Find the active cursor then you will know what field you need to input.
Hope this helps.

Settlement of WBS element down payments to an asset under constructions

The down payment (of the transactions tcode F-47 and tcode F-110), are
always settlement wbs element (tcode CJ88), we do not want to post down
payments to the receiving asset under construction (transaction type
180 or 181).
In the down payments are always taken into account in the settlement to
an asset. The settlement of the down payment is the actual reason for
the previous update of down payments in FI (Transaction type group
15). Furthermore, the settlement of down payments to assets should
not be capitalize.

When you search on this forum try to put Date range "ALL" to get more results. Please read below threads and you will get the solution.
MIRO:Transaction in area 15 contradicts the net book value rule
Transaction in area 01 contradicts the NBV
Looks like you have a negative balance in your WBS which you are trying to settle to FA.

Creation of internal order (investment order- asset under construction)

I want to capture the cost of asset under construction through internal order (controlling) not throgh Investment Measure module. How i can do this.

Hi
It is the same flow as explained by AP above
If Investment management module is active, then on settlement i believe the AUC asset is automatically generated. Therefore you have to define an asset master and then include this asset in the settlement rule of the IO. Thus on settlement the cost in the IO would flow to the asset
Thank You,

Error in dep run - Asset under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!
with regards,
Prabhakar

Hi,
I had the similar situation couple of months back. I followed below mentioned process and it worked out well.
1) Maintain GL account for depreciation in AO90
2) restart depreciation run for the relevant period
3) change the depreciation key to 0000
4) repeat depreciation run for the same period (It will post a reverse entry in the same month itself. So the net impact of depreciation in the same month is zero).
By the way I have a suggestion to prevent this issue in future.
You may not be able to detect this issue on test run if you execute on foreground mode because the test run execution is restricted to 1000 assets. If the error is on 1001th asset, you will not know.
Hence, always execute depreciation test run on background mode, check for any errors and execute production run only if there are no errors.
Hope this helps....
Best Regards,
Madhu

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

New Depreciation Area in Asset Master Data, for assets under construction.

Hi,
The issue is relating to New Depreciation area. We have created new Depreciation area as 80=IFRS. We had followed three steps
1. Create Depreciation area via OADB.
2. Activate Depreciation area via OAYZ.
3. Automatic opening of new depreciation are via AFBN and program RAFABNEW :-
3.1 u2013 Indicator: Leave values initial = ticked. Set this indicator if you want to open the newly created depreciation area without any values i.e. blank.
In this we have find that the old assets value has been copied. But when we are doing internal order settlement through KO88 i.e. from pre-cap to AUC we are not finding new Depreciation area 80=IFRS in AUC. We had checked in AW01N.
Letu2019s assume that creating a new deprecation area is normally not required since these assets are not depreciated. But During the final settlement, the new depreciation area should also automatically supplied with values from the reference depreciation area from the AUC(assets under construction) in the completed assets. But we doesnu2019t find any values of in Dep Key = 80 IFRS for final assets.
In Assets Class of AUC we had used Investmnet Measure as Status of AUC.
Kindly provide solution for the same.
Nikhil

Check Transfer Variant 5 (under Transactions->Intercompany Asset Transfers->Automatic Intercompany Asset Transfers->Define Transfer Variants):
5     Investment measure settlement
Your Transfer Method is most likely 1 now (without transfer to dependant areas), change it to:
4     Gross method with transfer of values to dependent areas
This should help.

Asset under construction-IM module

Hi,
I am planning to manage the asset under construction (AUC) by the PS module. This means to create the AUC through the WBS element, and finally settle to the final asset. For doing that I understand that the asset under construction class should be created as an investment measure.
I am asking if it is necessary to implement the IM module to manage the AUC by PS module.
If it is not necessary which is the difference of having IM implemented?
Regards,
Cecilia

Hi Cecillia,
To answer your questions:
You need to define specific asset class for AuC (status of AuC "investment measure" in OAOA)
You do not need to "implement" IM by creating investment programs but what technically make a internal order or WBS element an investment measure is the presence of an "investment profile" in their master record that will pilot the creation of the AuC. Investment profiles are defined in transaction code OITA that can be found of the IM part of the IMG
I second Ajay comment regarding the use of WBS elements (PS) vs. internal orders (CO) as investment measures: PS offers a lot more possibilities and options than CO but the set up, maintenance and daily use is much more complex. Take the time to consider both options.
Good luck and best regards
Thomas

WBS Elements and Asset Under Constructions have different Cost Centers

Hello Experts,
We have created a WBS element in one of the projects.
As per standard process, when we create the WBS Element the Asset under construction is also getting created through the settlement rule within the WBS.
These assets should have the same Cost Center as the WBS has. However we are in a situation wherein the Cost Center in the asset under construction is different than the Cost Center in the WBS.
I have checked the settings like automatic account assignment, etc but all settings look correct.
Can you please explain first what could be the reason for such a difference between Cost Centers in WBS and AuC's and what is the solution to avoid it in future?
Thanks in advance
Leena

Thanks for your replies...
@ Alex - There is no Investment Programme ID maintained for this WBS in question since there is no IM for this project.
@ Abdul - Please elaborate more on Validation and Substitution.
Regards,
Leena.

Asset Under Construction Functional Inputs

Similar Messages

Maybe you are looking for