Asset upload: Deactivation Date not available in the standard program(LSMW)

Hi,
I am trying to use the standard program for Assets upload,RAALTD01. But, the field de-activation date (ANLA-DEAKT) is not available for mapping. This is the only field am missing out of more than 200 fields involved in the upload. What would be the best approach inorder that I can use LSMW and at the same time map this deactivation date field ; provided we are not using the Recording method.
Looking forward to your replies.
Regards,
Sophia Xavier

It is not possible to do this in the transaction AS91. When you are doing the take over during a fiscal year you have to go from the tab Asset values to Transactions and fill in there the ttype for deactivation.
Other wise you have to create a LSMW that is doing this deactivation after the upload

Similar Messages

Assets upload: Deactivation Date is not available in the Standard Program

Hi,
I am trying to use the standard program for Assets upload,RAALTD01. But, the field de-activation date (ANLA-DEAKT) is not available for mapping. This is the only field am missing out of more than 200 fields involved in the upload. What would be the best approach inorder that I can use LSMW and at the same time map this deactivation date field ; provided we are not using the Recording method.
Looking forward to your replies.
Regards,
Sophia Xavier

you can use ABAP program with BAPI
call function 'BAPI_FIXEDASSET_OVRTAKE_CREATE'

Disk quota data not available.

I've got quotas enabled for my home dir volume, quotas set for all my users, and they appear to be working (logged-in users show the appropriate amount of space remaining in their home dirs).
But clicking on the Quotas section of Server Admin nets me a blank log page with "Data not available" at the top.
I've seen the quota chart on this machine before in earlier test builds, so I know what I should be expecting, but can't figure out why it's not showing up. Any ideas?
How do I rebuild or reindex the quota system, if that's what I need to do?
Thanks!

We are having the same issue since upgrading to 10.4.11. Currently we are investigating the possibility of accessing this information through the terminal using the 'quota' tools. I do not have ready access to the server though so progress is slow.
As far as I can make out if you can run 'fsck' this will the ASCII files that the user and group quotas are stored in and may effect a repair. I haven't yet been able to try this to see if it will work.
Anyone else got any suggestions?

Position 1000001 not available for the start date of the infotype record

Dear Experts/Gurus,
I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
Please let me know how to sort out this issue asap.
Rgds,
Vikrant

Dear Friend,
Use PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
Regards,
Aks

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

I've upgraded to Yosemite. Iphoto is out of date and won't open. I'm being directed to the app store for a free upgrade but there is nothing there. being told 'upgrade is not available in the US'

iPhoto is no longer available from the Mac App Store. Update to 10.10.3 and use Photos.
(125792)

"Finnish with street names" not available in the p...

Hi all! I just bought a Nokia 5230. I used the Nokia Ovi Suite to upload one additional voice to the phone: Finnish with street names (Suomi katujen nimillä). The upload was successful ( I even checked the memory card). However this voice option is not available on the phone in the Ovi Maps Settings (not for walking or driving). Help!
Solved!
Go to Solution.

I got it working by accident. I have the maps 3.0.4 beta and the finnish voices with street names work with it. I don't if it needs 3.0.4 beta or if the maps needs some kind of reset.
I had speeding camera problems with maps and installed the maps several times, see
/t5/Maps-Navigation-and-GPS/Nokia-5230-Safety-Cameras/td-p/679555
I checked the cities/diskcache/voices directory and the finnish_tts directory had contents, but I was unable choose it from the menus. There is some kind reset problem, when new data is downloaded.
I can't test if following works, but try it. If it does not work try reinstalling the software after you have deleted the cities-directory and qf file as described in the other post with link above.
Turn off the driving and walking guidance. Close the map application. Start the map application and use the navigation with a target. Close the navigation and maps application and restart the maps and see I you can find the driving navigation language finnish with street names (suomi - katujen nimillä).
If that does not help then try the delete/install procedure. I don't know if it works with 3.0.3 or if you need the 3.0.4 beta.
I think the maps application needs some kind of refresh or reset or factory settings function.
BTW, the swedish location names pronounced in finnish (like in motorway exits) are sometimes funny, Mikko's (the voice) swedish is even worse than mine.

While asset upload dep is not calculated

Hi,
When asset uploaded dep is not calculated can i calculate it now
please help me
thanks
Radha

Check the dates for Legacy Asset Data Transfer
Asset AccountingAsset Data TransferParameters for Data TransferDate SpecificationsSpecify Transfer Date/Last Closed Fiscal Year
Note down the year that is mentioned.
Then go to Asset AccountingAsset Data TransferParameters for Data TransferDate SpecificationsSpecify Last Period Posted in Prv.System (Transf.During FY)
Check the period upto which the depeciation is posted in legacy system.
Chek the freequency of depreciation posting in OAYR.
Go to asset explorer AW01N and see in the posted values tab the status.
IF the settigns are in sync and the depreciation was not calculated at the time of giving the data for cutover now you can run this basing on the settings in OAYR. All the depreciation will be posted in the current period. This will have an effect on costing if product costing is in place.

My app store wont let me download apps, says they are not available in the uk please help??

my app store wont let me download apps, says there not available in the uk?? please help??

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Data not available in infocube

hi all,
I havae an Infocube for which data is coming from the ods.
yesterday i found the data is not available for an info object in ods for which data is there in source system.
then I manually enter the data in the ods and today morning when i check the data in the cube it is still displaying blank but data is there in ods.
thanks in advance
sridath
Edited by: sridath on Nov 19, 2008 7:31 AM

Hi,
There could be many reason for that data not coming to the cube.
are you able to see the the data in the DSO for this object??
Are there any routine written in the cube and the records getting deleted or changed in that?
If the value of this object is getting populated through some routine??
Are you checking the values in the report or in the cube??
The value for this object may be in the after image record in the cube....so check all the records in the cube for the same value of the key fields of the DSO which has values missing.
Delete the data from the cube through a selective deletion for this record which you want to get changed and then do a full repair from the DSO for same selections.
Indexes and compression will not affect this process in any way but once request is compressed it ccannot be deleted and you will have to delete the value from the cube through seletive deletion.
Thanks
Ajeet

Data not available in cube

Hi all,
I have just loaded the data from PSA to DSO, and then from DSO to Cube.
New requests enter in the Cube. When tried to check the contents of this new request, there is no data at all.
But if i check the contents of the requests of DSO , there is data in it. i have used this request to transfer the data to Cube , but in the cube i cannot find the data at all.
I have tried checking the contents of this cube by running a query in the Query Designer, but there also i could not find any data , it gives "no data found".
can any one please help me regarding this issue?
Thanks in advance..
Regds,
Maddy

Hi Maddy.
Please verify that there is no data in the cube from TA LISTCUBE.
You might have choosen some chars and KF that is not available in the cube in the query designer.
The records could also happen to not be updated in the cube because of update rules etc.
Hope it helps (assign points if helpfull!).
BR
Stefan

On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do? Please don't tell me I have to buy a new Mac to be up to date.

On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

The pool managing the instance is not available or the location monitoring object cannot be found - discovery progress

Hi,
I have installed scom 2012 with integrated SP1 on windows server 2008 R2 with integrated SP1 and SQL 2008 R2 SP2.
The Problem I have is when trying to discovery I´m getting this error:
The pool managing the instance is not available or the location monitoring object cannot be found
Date: 05.03.2013 14:44:22
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
   at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
How can I solve this? Thank you.
gruss Daniel Ovadia MBSS - Microsoft Dynamics CRM MCNPS

See the article I wrote/posted here about monitoring Domain Controllers: http://adinermie.wordpress.com/2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/.
And to add an account to Local Administrators role on a Domain Controller, follow this:
Open a command promt using the "Run as administrator" function and then run the following command.
net localgroup Administrators /add {domain}\{user}

Today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet

today at 8am est my card was charged but when checking order status it saids expected ship date not available at this time and it also saids we received your order and it is in process . payment not taken yet
but card was charged full amount and i havent gotten anything else been checking for update all day and got nothing i did order iphone 6 plus at 3:01am and everything went through and i was finsihed at 3:06am

chriss2633,
I know how exciting it is to have all the information on the new phone. I did send you a Direct Message. Can you please respond back to that message? Looking forward to hearing back from you.
KevinR_VZW
Follow us on Twitter @VZWSupport

0repmode "Restatement" value is not available in the BEx query

Dear SEM-BCS experts,
We need to select 0repmode "Restatement" value in a BEx query, but it is not available (only # and Standard). The query is based on the SEM-BCS virtual cube. We use SEM-BCS version 6.02.
I would be grateful if you could help us to resolve this problem.
Mila

Dear Mila,
Report mode. "Restatement" availability purely depends on the settings made for
the transaction data transfer ; between Transaction cube (BCS cube) to Reporting cube (BW cube).
Please check in the info package created for Transaction cube(BCS Cube) where in you can see the available options. If the data transfer is happening with reporting mode "Restatement" then it should be available.
Most of the people use one Standard (S), Purchase (P).. but Restatement (R) option also available.
Hope this will give you clarity.
Thanks
kamal

"Expected Ship Date: Not available at this time." Please help.

I ordered an iphone 6 plus gold at 12:01 AM PST. My email confirmation says "Deliver By: 09/19/2014". However, when I go to check the status of my order it says: "Expected Ship Date: Not available at this time." Please help. Thanks!
Please PM with details if possible. Thanks in advance!
Subject was edited by: Verizon Moderator

Hello JFull14. Making sure that your order is still on track is very important. By chance, has there been an update to your order status screen? http://vz.to/Ulymw6
If not, I have sent you a DM so we may help look into this.
NicandroN_VZW
Follow us on twitter @VZWSupport

Asset upload: Deactivation Date not available in the standard program(LSMW)

Similar Messages

Maybe you are looking for