Asset value for Credit memo

Hi Experts,
I'm new to this forum, Need some help on how the Ordinary depreciation calculated for credit memo.
It is Valuated Goods receipt, asset capitalized before the IR. However, there was a difference in value between GR/IR and the different value automatically got adjusted in APC transaction and also credit memo passed for the difference.
My question here is credit memo value is 2.46 but corresponding depreciation value is 22.14.
Note: It's a Low value asset, useful life is 1 Month. Entire depreciation already posted for GR Value which means more than APC value.
GR value           : 1192.20 -----
APC value         : 1189.74------
Ordinary dep     :   1192.20---
(posted value)
Thanks,

Hi Mukthar,
Thanks for your reply.
However, the credit memo value is only 2.46 USD, depreciation getting reversed each month 2.46 USD and total depreciation reversal value is 22.14 (USD).
Just want to understand the logic behind it.
Thanks,

Similar Messages

Implement the following scenario for credit memo

Dear experts!
Thank you for your attention!
how to implement the following scenario for credit memo??????
1.Credit memo requests are usually blocked for billing (that is, credit) upon creation until the
employee responsible releases this block.
2.Within our company, we want make the definition of the point at which the check is carried out and
the employee responsible dependent upon the value of the credit memo request.
3.If the value of the credit memo request is below a certain minimum limit, then it can be released
automatically by the system.
4.The workflow within the framework of credit memo processing now guarantees that the employee
responsible is automatically determined and informed when a credit memo request is created,
depending on the value involved.
waiting for your help!!!!!
Best regard!
Tangdark

Hi,
Hope so you know all the setting regarding credit memo customizing.
Otherwise use the standard one.
Regarding authorization go to PFCG and create a new role.
In that you can maintain the authorization regarding the minimum credit limit.
Please check out this setting.
And update me also if I was wrong.
Regards
Raj.

Value Dated Credit Memo

Hi,
Can anybody explain me the concept of value dated credit memo with example as I am not able to find out its example.....can anybody explain me with example

as I am not able to find out
Surprising !!!!!!!!
Below is the explanation given by SAP
Credit memos that do not have a value date will be immediately due for payment on the billing date. This means that the receivables and payables will not be reconciled.
When maintaining the billing types, you can choose the function u2018set value date for credit memosu2019.
If this function has been selected in the billing type, the reference billing date has not been cleared, and the baseline date for payment in the base billing document is after the billing date in the credit memo, then the field:
- VALDT (fixed value date) is fillied with the baseline date for payment from the base billing document, and the field
- REBZG (document number) is filled with the FI document number
If the base billing document has been reconciled and/or the baseline payment date is before the billing date in the credit memo, then the FI document number is copied into the REBZG field.
thanks
G. Lakshmipathi

Value dated credit memo field

Hello Gurus,
there is a paragraph following, please tell me what does it mean? what is "reconcile" and "concile"?
" If the Value dated credit memo field is set in the billing type, then the referenced billing document is
not reconciled if the baseline payment date for the originating billing document comes after the
billing date in the credit memo: then the field VALDT (value date) in the credit memo request is
filled with the baseline payment date from the originating billing document."
thanks very much!

hi friend ,,
you can use this when you are giving the goods to the customer which is based on some agreement .
eg. you will bill the customer @10% no matter what is the present trend in the market .
hence the bill will be calculated at 10% .
these condition totally depends upon companies need and you can configure them according to you need .
reward if it helps
regards
Aditya.

How add EMPST for Credit memo with segment E1EDP01_IDOC

Hi experts,
Do you have any ideas for add data in EMPST for segment E1EDP01 (receiving point, in Shipping view) for credit memo ?
I can add this data for standard order but not for credit memo..
My segment E1EDP01 (exemple of WE19) :
If i try to create an credit memo with these data that doesnt add value for EMPST in my order. But if i change the type of document for an standard order that's work and add the value for EMPST ( i change type of document in E1EDK14).
I haven't any ideas for add EMPST for credit memo, did you have ideas ?
Thank's a lot.
Umti

Hi
while creating credit memo
in item level enter the material number and material type or g/l account number if you want to post such costs.
hope it helps

Terms of Payment for credit memo

Dear Friends:
I have created terms of payment (Z12). This has to be used in credit memo in customer - T.code F-27 .But in customer master, there is a different terms of payment.How can i use the newly created terms of payment(Z12) in T.code F-27.
The New Terms of Payment should be in the credit memo by default. Is there configuration settings by which the new terms of payment are selected by default?
Please advise.
Regards
MSReddy

Hi MSReddy,
There should be a field in the customer master/company code data/payment transactions tab to enter the payment terms for credit memos.
If this is not displayed for your customer group check screen layout settings for customers.It might be supressed.
Regards
Nadini

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Standard Process for Credit Memo & Debit Memos in CRM

Dear all,
What is the standard process for Credit Memo and Credit Memo Creation within CRM Complaint Transaction?
We can successfully replicate Return Items and Replacement Items in ECC Return Order
But I don't know how to process Credit Memo and Debit Memo in ECC.
What are the Accounting Implications takes place once we create and release the credit memo / Debit memo in CRM Complaint Transaction?
How to see the entire document flow?
I can create Credit Memo for a Returned Line Item in CRM without any errors. But I could not see any follow-up transaction or process either in CRM or ECC.
Kindly educate me in this regard. Your suggestions are highly appreciated
Best regards
Raghu ram
Edited by: Raghu Ram on Jun 23, 2010 6:29 PM
Edited by: Raghu Ram on Jun 25, 2010 8:30 AM

Hi suchi,
The following would be very useful to you.
To reduce implementation time for print forms development, SAP has created a set of the most commonly used forms - Preconfigured Smart Forms:
SD: Invoice, Quotation, Contract, Delivery Note, Order Confirmation, Scheduling Agreement, Inquiry, Cash Sales, Picking List
MM: Purchase Order, Request for Quotation, Contract, Delivery Schedule, Good Issue (3 scenarios), Good Receipt (3 scenarios)
FI: Dunning Notice
All can easily adapt these forms to their requirements, saving time and money.
Hope this information has been useful to you.
if you would like to have a smartform of your own i.e a Z or a Y then there is an option to get a sap script copied onto a smartform.
the sap script for the same is -> F140_DOCU_EXC_01
Go to Txn SMARTFORMS and just put the required smart form name in FORM field and then go to the menu bar: Utilities-> Migrate SAPScriptForm and juts type in the Script name which is given above(i.e F140_DOCU_EXC_01 )
I hope this will be an amicable solution.
if helpful pls reward.
Thanks
Venugopal

I am having problem while doing vf01 for credit memo

I have done va01 for credit memo.
but when i m doing vf01 for credit memo it is showing account detemination error.
pls help me.

Hi suchinder
Go to t.code VKOA and check wheather for the credit memo billing document type your account determination procedure KOFI00 has been assigned or not. If not assigned assign it and then save the billing document again then it will be forwarded to FI .
Regards
Srinath

Problem while doing invoice for Credit memo request

Hi all
I very well known that Out boud Delivery is not needed for Credit memo request but after saving the CMR and when i raise the Credit Memo (VF01) system is showing a error message saying "PGI not done for Outbound Delivery 30047402"
In CMR document type i have set the order related billing and i have removed the billing block also
I have raised the CMR based on Invoice
Kindly help me in this regard
Regards
BMS

Hi Raj Aryan Malhotra, Thanks for ur reply
The setting which u said are already there
The second one that is, change the copying requirement of header to 11. i did this but this time the message was different "The document is not relevant for billing" . After checking the log i could the follwoing info
Client                                                   240
Group Number
Sales Document Number
Item Number of the SD Document         000000
Schedule Line Number                         0016
Counter in Control Tables                     00
Message Identification                         VF
System Message Number                    016
Output Type                                        I
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group Type                                         F
Kindly help me to resolve this also
Regards
BMS

Regarding rate, sales tax and discounts for credit memo request and returns

Dear ALL,
Rate column is not displaying for credit memo request. suppose credit memo should be given due price diifererence
with referance to billing documnet credit memo request to rised. but if i want to edit rate column is not available.
how vat and discount has to be captured in case of rate diifferance for credit memo.
In case of returns will taxes applicable for returns credit memo
Gl accounts for credit memo same as billing or different GL accounts to be maintained or not
client has the scenario that if credit memo request has been rised for with referance to billing due to rate differance.
If customer returns materilas belongs to same billing. so based on the returns order returns credit memo to be rised .
But how the sap captures exact price of the materila during returns. ie; price modified during credit memo request.
Thanks & Regards
ramesh

HI,
Remove all the other condition types from the procedure and keep only those which you need.
Regards
Abhilash

Accounting doucment not get created for Credit Memo

Hi
When creating a cancellation doucment(vf11) for credit memo accounting document not get created.While I go for analysis then it is determining the G/L account.But not getting created the accounting doucment.
When i select "Release to accounting" then it is giving a message like this:
"Automatic clearing of billing document 951
and canc. doc. 90000572 not poss." as informatiion first
and then later it is throwing an error message that "maintain correct number range"
While for the same material or earlier cancellation happened and accounting doucment get created.
Please help me out;How would i get this solved?
Thanks in advance

Hi,
You may also check for Number Range - Maintainance & Assignment.
T. Code: SNRO
Table/ View: RV_BELEG
Here, Mantain Number Range.
To Assign,
T. Code: SM30
T.Code: Bill_Num (or select if different in your case)
Assign No. range to your combination of Sales OrgDist.ChannelBill Type i.e. for Cancelled Billing Doc. Type
To Maintain Number Range for Accounting Documents,
T. Code: FBN1
Best Regards,
Amit

Tables for credit Memo and Purchase order

Hi all,
I need to develop a report to dispaly all the credit memos for the open qty,
My issue that is there any table where we can have information for credit memos and purchase order,
like the input fields is company code,customer number,fiscal year,
hope you understnad,
Please let me know if you need any more information,
Thanks&Regards,
Cghand

Hi
Invoice Verific. table:
RBKP - Document Header: Invoice Receipt
RSEG - Document Item: Incoming Invoice
Regards
Prasanna

BOM explosion for credit memo req,free of charge,returns order types

Hi Gurus,
My client has the following requirement.Sales BOM with header pricing has to be configured for standard order, free of charge, credit memo req, debit memo req, returs order types. I have configured the BOM for standard order(ZOR) successfully, but for credit memo request and other orders its not picking correctly.The component items for the BOM structure is repeating twice.Pleae let me know how to maintain item category determination for credit memo request and other order types.
For credit memo req I have created new item category by copying the G2N and updated the structure scope as A and application SD01.so the new item category is ZG2B and I have maintained the below mentioned determination.
ZCR ERLA ZG2B
ZCR ERLA ZG2B G2N
ZCR NORM ZG2B G2N
Regards,
Hari Challa.

Hi,
That is incorrect.
For sales order, you shoudl have used item category groups as ERLA, LUMF respectively. The resultant item categories will be TAP/TAQ etc. The same kind of configuration should be enabled for Credit memos and others also.
There the item category group will be ERLA, or LUMF
The document type will be CR / RE etc based on the process
Now the resultant item category should be TAP/TAQ or you can even have RENN etc but the property of this IC should be same as TAP/TAQ based on what you are expecting, apart from the standard configurations of a return process. If you do this, then your pricing and items will come up properly.
In specific, you have to look at the BOM configuration of the Item category in the BOM area.
If you need any detail, pls let us know.

Need API for Credit Memo creation-R12

Hi All,
I am working on R12 Implementation process. I have a requirement for creating the "Credit Memo" using API.
Could you please any one provide the API for Credit Memo creation process.
Thanks,
LSP

Hi,
Please refer the following links:
http://www.betteroracle.com/2012/08/ar-api-create-credit-memo-r12.html
http://easyoracleapps.blogspot.com/2011/08/creating-credit-memos-and-appling-these.html
http://prasanthapps.blogspot.com/2011/05/credit-memo-creation-via-api.html
Googling will help you indeed
Rgds,

Asset value for Credit memo

Similar Messages

Maybe you are looking for