Asset - worklist processing status not getting changed

Hi,
I created a worklist through Tcode- 'AR01' for processing mass
retirement of assets.
I executed the worklist through Tcode- 'AR31', and released the
worklist.
The status is in 'In process' is not changing even when I keep on refreshing it.
The system speed is normal.
rgds

Hi,
The session is not getting displayed in 'SM12' for the basis person to break the session.
Also the worklist status shows 'IN PROCESS'
How should I delete a worklist?
rgds

Similar Messages

  • Inspection Lot status not getting changed to LTCA from REL for SubCon scenario

    Dear All,
    For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
    This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
    For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
    Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
    At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
    Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
    For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
    Has anybody faced such issue? Is this standard SAP?
    Kindly throw light on the process, is correct process followed?
    Regards,
    Tanuj Parikh

    Thanks.
    Thru MBST Inspection Lot status changed to LTCA.
    Why system is not cancelling thru MB01? 

  • Case Management ... Statuses not getting changed

    Dear All,
    I am working in a Development system of SAP CRM 2007.
    Now I have created a case which has 3 or more complaints attached...
    When I change the status of the case, the complaints in the case have statuses that doesn`t get changed.
    Kindly Help
    Thanks & Regards
    Sunil

    Hi,
    In CaseManagement, before creation of Case first you need to create a CaseType.
    First you need to create Status Profile, Attribute Profile etc.,
    After that in CaseType creation you need to select the profiles created by you.
    Then in Case created by you these gets reflected.
    When a new Case is Created automatically it will be in New Status mode.
    After when you attach the related documents(Linked Objects) and Notes then you need to change the Status.
    After that you need to attach the Processors for the corresponding Case Sequentially or Parallely and then save the case changing its status to In Process.
    Once the Case is saved you cant make any changes to the case.
    After the ProcessRoute triggers a workflow and Case status changes to Complete or whatever status you mention there.
    Follow the steps in Case Management Registry.
    For any queries reply back.
    Regards,
    Eswari.

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • Batch Classification Values not getting changed

    Hi Gurus,
    I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
    when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
    I have passed the following values in the parameters of the bapi :
    OBJECTKEY            = v_objectkey          
    OBJECTTABLE        = 'MCH1'          
    CLASSNUM             = V_CLASSNUM 
    CLASSTYPE           = '023'
    KEYDATE                = 30.04.2010
    ALLOCVALUESCHARNEW
    CHARACT = CLARITY
    VALUE_CHAR =  P040
    VALUE_NEW   = P040.
    Can some one help me solve this....
    Needed urgently..
    Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
    Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

    Hi Jacky,
    I am posting the code here.. Do let me know if u have ne queries:
    REPORT  ZNAVBATCH.
    SELECTION-SCREEN BEGIN OF BLOCK B1.
    PARAMETERS: P_MATNR TYPE MATNR,
                P_CHARG TYPE CHARG_D,
                P_WERKS TYPE WERKS_D,
                P_LGORT TYPE LGORT_D.
    SELECTION-SCREEN END OF BLOCK B1.
    START-OF-SELECTION.
      DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
            WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
            WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
            INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
            INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
            INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
            INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
            LV_KEY TYPE BAPI1003_KEY-OBJECT,
            INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
            INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
            INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
      WA_BATCH-KEY_FIELD = 'MATNR'.
      WA_BATCH-VALUE_INT = P_MATNR.
      APPEND WA_BATCH TO INT_BATCH.
      WA_BATCH-KEY_FIELD = 'CHARG'.
      WA_BATCH-VALUE_INT = P_CHARG.
      APPEND WA_BATCH TO INT_BATCH.
      CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
        EXPORTING
          OBJECTTABLE    = 'MCH1'
        IMPORTING
          OBJECTKEY_CONC = LV_KEY
        TABLES
          OBJECTKEYTABLE = INT_BATCH
          RETURN         = INT_RET1.
      IF SY-SUBRC = 0.
       WRITE: 'SUCCESSFUL'.
        CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
          EXPORTING
            OBJECTKEY              = LV_KEY
            OBJECTTABLE            = 'MCH1'
            CLASSNUM               = 'ZTBATCHCHR'
            CLASSTYPE              = '023'
            KEYDATE                = SY-DATUM
          UNVALUATED_CHARS       = ' '
          LANGUAGE               = SY-LANGU
        IMPORTING
          STATUS                 =
          STANDARDCLASS          =
          TABLES
            ALLOCVALUESNUM         = INT_ALLOCVAL
            ALLOCVALUESCHAR        = INT_ALLOCCHAR
            ALLOCVALUESCURR        = INT_ALLOCCURR
            RETURN                 = INT_RET2
        IF SY-SUBRC = 0.
          WRITE : 'SUCCESSFUL'.
          READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
          IF SY-SUBRC = 0.
            WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
            WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
            MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
          ENDIF.
          CALL FUNCTION 'BAPI_OBJCL_CHANGE'
            EXPORTING
              OBJECTKEY                = LV_KEY
              OBJECTTABLE              = 'MCH1'
              CLASSNUM                 = 'ZTBATCHCHR'
              CLASSTYPE                = '023'
             STATUS                   = '1'
             STANDARDCLASS            =
             CHANGENUMBER             =
             KEYDATE                  = SY-DATUM
             NO_DEFAULT_VALUES        = ' '
           IMPORTING
             CLASSIF_STATUS           =
            TABLES
              ALLOCVALUESNUMNEW        = INT_ALLOCVAL
              ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
              ALLOCVALUESCURRNEW       = INT_ALLOCCURR
              RETURN                   = INT_RET3
          IF SY-SUBRC = 0.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
               WAIT          = 'X'
            IMPORTING
              RETURN        =
            IF SY-SUBRC = 0.
              WRITE: 'SUCCESSFUL'.
            ENDIF.
          ENDIF.
        ENDIF.
    ENDIF.

  • In FBl5n (after accounting process) exchange rate gets change

    Dear Experts ,
    I am  facing 
    issue regarding in FBl5n (after accounting process) exchange rate
    gets change.
    Due to this, there is a difference in billing
    amount.
    According to the KBA 1481328, If there is a manual entry in
    the sales order field VBKD-KURRF (Goto -> Header -> Accounting),
    then it is copied into VBRK-KURRF. Otherwise VBRK-KURRF is determined during
    invoice creation from the currency tables (Transactions: OB08, OB07 and
    OB22) according to the billing date.
    It is supposed that manual entry has higher priority.
    Why system is
    fetching the exchange rate from OB08 when manual entry has first priority?
    Kindly Advice.
    Regards,
    Shachi

    First of all, you got the KBA number wrong. It is a KBA 1481238 - How are different exchange rates (Price, FI postings and Conditions) determined in billing documents, not SAP Note 1481328.
    Now, if you manually change the exchange rate in sales order(SO - Goto - Header - Accounting), as per standard this will not be able impact your pricing. As the system always uses the local currency to convert currencies.
    For further detail refer SAP Note 123298 - Euro: Conversion of document currency in sales&distribution. That can be helpful in understanding the standard behaviour and solution to the same.
    In addition to that from Sales Order to Billing, we have copying control field for "Price Exchange Rate Type" which can impact the result for exchange rate determination. Where the option available are:
    A - Copy from sales order
    B - Price exchange rate = Accounting rate
    C - Exchange rate determination according to billing date
    D - Exchange rate determination according to pricing date
    E - Exchange rate determination according to current date
    F - Exch.rate determination accord.to date of services rendered
    Thanks, JP

  • Check Deposit List - cannot post Processing status not correct

    Hi Expert,
    I was trying the edit a check deposit list and I encountered error message during save.
    "Cannot post. processing status not correct."
    Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
    How to go to statement/list processing to change to status to 3?
    thank you

    Hi,
    Use T Code FF67,
    Select the Check deposit list and click enter. Now go to Settings > Specifications
    Here you will find the "Processing Status" for you to continue.
    Regards
    AKV

  • PO line item condition not getting changed

    I am trying to change one condition in PO line item via BAPI_PO_CHANGE. It is not getting changed.
    But the return message says Ind. limited tend PO 7100076060 changed, S (type),06 (ID), 023(Number).
    The code is
    zpo_cond-condition_no  =  itab-knumv. (1001384871)
    zpo_condx-condition_no =  itab-knumv.(1001384871)
    zpo_cond-cond_st_no   =  itab-stunr.(960)
    zpo_condx-cond_st_no  =  itab-stunr.(960)
    zpo_condx-cond_st_nox = 'X'.
    zpo_cond-cond_count   =  itab-zaehk .(01)
    zpo_condx-cond_count  =  'X'.
    zpo_cond-itm_number   = itab-ebelp.(000010)
    zpo_condx-itm_number  = itab-ebelp.(000010)
    zpo_condx-itm_numberx = 'X'.
    zpo_cond-cond_type  =  itab-kschl.(ZI%)
    zpo_condx-cond_type  = 'X'.
    zpo_cond-cond_value =  p_per.(6.000000000)
    zpo_condx-cond_value =  'X'.
    zpo_cond-cond_p_unt  = punit .
    zpo_condx-cond_p_unt = 'X'.
    zpo_cond-cond_unit =  unit.
    zpo_condx-cond_unit = 'X'.
    zpo_cond-change_id = 'U'.
    zpo_condx-change_id = 'X'.
    APPEND zpo_cond.
    APPEND zpo_condx.
          CALL FUNCTION 'BAPI_PO_CHANGE'
             EXPORTING
               purchaseorder                = zpo_header-po_number
               poheader                     = zpo_header
               poheaderx                    = zpo_headerx
            TABLES
              return                        = l_return
              poitem                        = zpo_item
              poitemx                       = zpo_itemx
               pocond                       =  zpo_cond
               pocondx                      =  zpo_condx  .

    Hi,
    1)In po item give a unique no.(ex:0010) & ITEMX as a new line item with same no will be created.
    2) service No. will be system generated. Pass packno = variable(ex:= '0000000001' ),
    subpackno=variable +1 (ex: '0000000002' )
    thanks & regards.

  • System status not get updated.

    hai any one can help me in this pls
    my client created sevice orders in crm system and in these some details are reflected in to mobile client.There is integration between in CRM & Mobile clients.
    present requirement is system status is not get updated.
    user status is released.but in system status showing like 1) open  2) contains error. This is occure for some sevice orders  which are created in perticular transaction type  for suppose if my client created 1000 service orders in that 200 or 250 orders status not get updated.
    Because of  this the followup document is not created.
    For temparary pupose to overcome this issue we are doing like this. There are two mandatory fields are there in that any one delete and reenter the same value then automatically the system status get updated in to release status.
    where the problem whether  is in configuration or it is in system
    or it is some technical. Before its worked properly recently they got this issue. How can i overcome this issue permanently.

    Hi
    The status of a sales transaction, saved in CRM Enterprise must be without errors so that it can be transferred to the mobile client
    Sales transactions with errors can be transferred from the mobile client to CRM Enterprise.
    Check the table CDBD_STATUS
    Reward with points if helpful
    Regards
    Manohar

  • Change Process are not getting triggered

    Hi,
    I have changed the first name of the user in OIM but the same is not getting sycned in DSEE.
    When I have added the Change First Name Process task from Resource then it got successfully completed and the user's first name got changed in DSEE.
    Automatically Change First Name process task is not getting triggered. It worked for me earlier but now it is not working.
    Could you please let me know the reason for the same.
    Thanks

    verify below
    1. task name under DSEE process def and process trigger lookup is exactly same(remove if any white space etc.)
    2. make sure the task is marked as conditional
    3. Allow Multiple should be checked
    --nayan                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • BDOC status completely processed: data not getting updated

    Hi Experts
       I'm  downloading BP data from R/3 system to CRM system , data is successfully getting into the CRM system when checking the SMW01 it was showing the status fully processed (status green) ,but data is not getting updated in tables.
    Please let us know what could be the possible reason
    Thanks & regards
    Rajasekhar

    1) First check the data in the BDOC. Check if the partners are really cmoing.
    2) Check if there are any dumps created in ST22. If yes Pls analyze them.
    3) Check the flow defintion for bdoc type BUPA_MAIN. You can check this in SMW01. Check if the actual call to upload the data and  create BP is done.

  • BBP_PGRP_ASSIGN_BAdI:Purchase Grp & Purchase Org. are not getting changed

    Hi Experts ,
    Actual  Process:
    As per the normal process when Purchase requisiton is created in ECC then  it will get reflected to SRM through BBP_EXTREQ_TRANSFER.So while SRM creating that it will assign some deflaut purchase group and organisation .
    Requirement given by user:
    But user requires the actual purchase org and purchase group to be determined from back end i.e.ECC and reflect the changes in SRM  .So we have tried implementing the BADI ->Method:( BBP_PGRP_ASSIGN_BAdI->BBP_SC_PGRP_ASSIGN) using filter option EXTREQ_INB.
    Now after implementation when we debug the badi the values are getting updated coorectly in the Change attriutes of Badi .
    After the badi execution finished will Org values are not getting modified .So on further anlyses we found that in   CT_ITEM(Shopping Cart Item details) the value EB_LOG_SYSTEM  is showing as SRMCLIENT300(SRM System ID) but when we manually changed that to EBD220(ECC system ID) the data is getting updated correctly in SRM .
    As per my understanding the back end system for SRM is ECC sytem id .But here it is capturing SRM system id.
    So I want to know how the standard will capture the logical system  as SRM ..instead EBD ..?
    Regards
    Phani.

    Hi Sanjeev,
    Backend purchase group is on under Act ECS.
    Here the main issue is - Users placed under backend purchase group (org -model) However when we trying to  create ECS PO in SRM , noticed that system is picking local purchase group  . Hence not replicating to backend system.
    I hope BADI should be enabled (BBPPGRPFIND) - could you please through some light on this ,how to proceed with this BADI?
    Thanks in advance
    Harish

  • Idoc in 64 status not getting released

    HI experts,
    I have inbound idocs in 64 status they ar getting processed in a slower speed but i saw that there are few idocs of some previous date whihch are still in 64 status.
    Any idea why they are not getting processed??
    is there any logic which say give priority to current date idocs first????
    all the configuration are in place to make it processe it immediatly.
    i am not able to understand ahy they are not getting processed.
    please guide me.
    thanks in advance

    Hello,
    I have seen these situations in some occasions. These inbound IDOCs are set to process immediately to the application; but at that very moment there are no free processors to handle them.  So they stay in status 64. The work-around is to schedule BD64 to take care of these rare situations.
    Thanks,
    Venu

  • Asset Deperciation amount is not getting updated in cost acccount?

    Dear all,
    Created an asset and assigned that to a cost center and maintained dep. key for both book of accounts and cost account, then I run the dep. its getting posted to FI but at the same time when i check S_ALR_87010175  i am not getting the cost center report.
    please help
    Regards
    Raziq

    Hi Raziq,
    first let me mark a conclusion to be sure that i have understood you question.
    You run the  S_ALR_87010175 and don't see the particular asset X?
    Please run the S_ALR_87010175 only with company code.
    Can you see it now?
    Could you check this with oter reports, for example RAGITT*, AW01N?
    regards Bernhard

  • Bapi For Service Po change not Getting Changed

    hi,
    I need to change the qunatities in the Services tab of the PO to close it. So , I tried using BAPI_PO_CHANGE.
    I passed the po number and the structures poservices and poserviceaccess .But it is not getting affected.
    In the Bapi Documentation i read the following.
    In method BAPI_PO_CHANGE, you can only create service items, you cannot change them.
    Is there any way that any way i can change the service po.
    Am i missing Something.
    With thanks in advance,
    Syed Ibrahim .G
    Edited by: SYED_ibbu on May 26, 2011 11:45 AM
    Edited by: SYED_ibbu on May 27, 2011 6:16 AM

    Hi
    Please go throug  the following links.
    <<links removed by moderator and points unassigned>>
    Hope this will helps you.
    many thanks,
    Regards,
    Kiran Kumar
    Edited by: kishan P on May 27, 2011 11:30 AM

Maybe you are looking for