Assiging Query to Web template

Hi,
I was asked to add new query that I created to existing web template.
I have been able to Identify the web template that other queries are assigned to but don't know how to add my query to it.
for example
Template_ID=0ANALYSIS&Infocube=CCA&Query=cost_center
I would like to add my infocube and query (&Infocube=CCA&Query=cost_center) to the query template
Please tell me how I can manually maintain this in BI. I am using BI 7
thanks
Edited by: Bhat Vaidya on Sep 10, 2008 9:44 AM

Hi,
thanks for your response.
I can easily add the data provider directly to the template but thats not what I want as the template doesn't have any dataprovider attached.
All reports in the web are using same web template so for maintenance purpose it cannot be done that way like you mentioned.
I know that the cube name and query name can be manually added to the template in BI as I have seen that before but cannot remember how is done or which transaction code to use to access it.'
thanks
Edited by: Bhat Vaidya on Sep 10, 2008 9:52 AM

Similar Messages

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

Authorization to query and web template in BI 3.5

Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks

Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM

Filters Query and Web Template

Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KS

the filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

How to use a query in Web template

Hello i have really a very silly question.
How can i use a Query that is already defined by BEX into a Web template so that i can set up simple properties like changing colours of Row as well as avoid Tab pages.
I logged into a Web template.
Can any provide step by steps.
Please help

No questions is silly, doubt is always a doubt and clarifying the same is the best way to deal with that.
Anyway philosophy apart and coming to business.
1) created the query in Query designer, say Zquery1
2) logon to WAD.
3) for assigning Zquery1 to WAD template, you haev to decide how you are going to use Zquery1 in WAD.
4) for ex: you want to display the query result and also a graph based on that result.
5) So we have to drag drop Chart and table in WAD.
6) create dataprovider and assign zquery1 to this dataprovider.
7) save and execute.
For chanding the colors, under properties, we will have many stylesheets delivered by SAP. Yiou can choose anyone on this which suits to your requirement. If not, then edit the stylesheet and code it as per your need.
Hope this helps. If yes, please assgin points.
Regards
Pankaj

Long Query Runtime/Web-template Loading time

Hi,
We are having a very critical performance issue, i.e. long query runtime, which is certainly not acceptable by client as well.
Background Information
We are using web application designer (WAD) 2004s release to design front end of our reports built in BI 7.0 system.
Problem Area
Loading of web template on browser
Problem Analysis
Query taking so long time to run, whenever we load it through portal or even directly through web application designer. Current runtime for query is more than a min. And I have noticed that 95% of runtime is taken for loading variable screen. FYI if I run query through Query Designer or BEx Analyzer, it takes 3-5 seconds to execute.
We have taken all the statistics and everything proves that query is not taking any time to execute but its the loading time which creates bottle neck.
Possible Cause
Web template holding 11 data providers, 5 of which are based on queries and rest are on query views. These data providers load into memory in parallel which could cause delay.
These data providers expose detailed variable screens. Out of 21 input fields, exposed by web template, 8 fields are based on hierarchy node variables and 1 on hierarchy variable. And to my knowledge each time hierarchy/hierarchy node variable loads complete hierarchy into memory whenever they are called (in other words, its not performance efficient to use hierarchies).
I request you to please consider this as matter of high priority and provide me with suggestions to remove bottle necks and make the application performance efficient. Please let me know, if you need any further information.
Thanks.
Shabbar

I would recommend you see how long the query execution actually takes without running from the web template. If actually the individual query takes long time then you need to do some performance improvement on back-end side (aggregates, indexing,... and so on).
But the performance issue is only with web templates, then you need to find some notes on it, because, I remember we had to apply some notes in relations of browser taking too long time to load the selection screen in web reports.
After exhausting all the option, then I will implement precalculating the query result before hand using broadcaster.
thanks.
Wond

Abap Query in Web Templates

Hi Gurus,
I am working on web reporting, we have a bunch of web queries that are working fine. And now my client wants to explore the possibility of displaying ABAP Queries on the web or embed them in Web templates along with the alreaday existing bw queries.
Please point me in the right direction, is it possible ?are there any documents or links that explain this ?
thanks
raj

Hi Raj,
You have several possibilities.
a) Just replace ABAP-Queries with BW-Queries (but the customer does not want that, I assume )
b) Explore the possibility of a Remote-Cube
c) Create a BSP, where you execute and render the ABAP-Query Data and show this BSP in an iframe in your WebTemplate
These are some possibilies.
Best regards
Frank

Checking Query and Web Template Authorizations

Hi, I have some code that does an authority-check to determine if a user has access to a specific query.
AUTHORITY-CHECK OBJECT 'S_RS_COMP'
ID 'RSZCOMPID' FIELD '__________'.
I need to be able to test to see if a user has access to a specific Web Template.
Any ideas how to do this?
Thanks!

Kenneth,
1. Find the roles a template is assigned to : Yes, use AGR_1251 table.
2. Find the roles a user is assigned to : Yes, use AGR_USERS.
3. check if the user has the role the template is assigned to? by joining both the tables.
By using these tables, programatically you can check it.
You cannot check this using C-Command AUTHORITY-CHECK OBJECT. As this checks only the authorizations for the user who is executing it. This command is more useful in the following scenario.
Eg.In BW if you have written a program for some reasons to read the values of an ODS active table. On this ODS you have authorization relevant infoobject. Lets say profit center. In order to check the profit center that the user is assigned to and populate the data for only profit centers for which he is eligible to view the data.
Hope this helps,
GSM.

Query related to BEx query and web template migration

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Hi,
We are upgrading our BW system from BW 3.5 to 7.3 and also planning to migrate the existing BEx 3.X queries and web templates to BEx 7.x version.
We have BEx queries and web templates published on enterprise portal in roles.
My query is that after we migrate BEx 3.5 queries and web templates to new version, do we need to re-publish these (migrated) queries and web templates on the portal or users will be able to access the reports without any issues.
or are there any post migration steps that we need to follow so that reports (with migrated version) are available to the end users through portal as before.
Thanks,
Tarun.

Problem when exporting Query from Web template to Excel Sheet.

Hello,
Im encoutering a problem when im trying to export query output from web template to excel sheet.
A popup windown appears when excel sheet opens which reads.."problem cameup in the following areas during load : Cell Value".The report layout appears to be fine but the totals shows unwanted values starting with * followed by number.
Any valuable inputs, what could be the problem. where can i rectify the same.
Regards
Ellora

Hello A K,
Thanks for ur time and response but the option u mentioned did not serve my purpose.
The problem seems to be only with pirticular cells.As mentioned earlier the layout appears properly..all the values are seen..but the end result..totals are disturbed.
eg: If the report shows in template the total value :20,668,554...when exported the values is shown as **668553.88000000600000.
So what could be the problem ? any template setting ? global setting to look at ?
Regards
Ellora

Error Executing query in web template

Hi,
We recently upgraded to Nw2004s. When i'm executing my query i'm getting below error message
Technical Information for Message:
Activate the ZCRM_IS01 InfoCube/InfoProvider Again
Notification Number BRAIN 056
When i activated the infoprovider we started getting
"Infoprovider is locked by User.."
Any idea what happening?
Thanks
Sachin K

U bet ...
Even after that you might get some errors but most of the datastore and DTP related issues are solved with SP09 ,good luck.
I know you must be aware of this ,but still heads up..
worth reading ,gives exactly how it would tackle most of your issues in different grey areas
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=210736&tstart=0">https://www.sdn.sap.com/irj/sdn/thread?threadID=210736&tstart=0</a>
Hope it Helps
Chetan
@CP..

YTD Query and web template

Hi,
i have created a query on YTD sales query and comparison with the previous year. i have created a structure using 0calmonth2 info object and restricted it for each month starting from July to June. In the key figures i have used sales values key figure and restricted one with variable 0I_PRFYE for all fiscal year periods of previous year and for the current year i used a value range from 001.YYYY to the current fiscal year period. where YYYY is the same fiscal year as in current fiscal year period.
After executing the query for sales values in previous year i have a value against every fiscal year period in the previous year. For the current year i have the value only for the first month as we are in the first month.
example:
                       jul aug sep oct nov dec jan feb mar apr may jun
Current year   17     0      0     0     0     0     0    0      0     0      0     0
Previous Year12   13    18   34    23   67    20 10    83   34     25   27
When i creating a line chart based on this data, for the current year the line drops from jul to aug and continues to be zero through out the year. what i am expecting is it should not drop to zero as we have not yet come to aug in the current year. What i am expecting is that the line should be showing as a dot in the current month jun, when the current fiscal year period is aug i will have some value in the aug so the chart should show a line from jul to aug.
I tried to change the display of zero's as blank & even tried replacing zeros with some characters but could not achieve the desired result.
can some body help me achieve this. Correct responses will be awarded appropriately.
Regards,
Ravi.

Hi,
The line chart shows the two series one for previous year and one for current year.
the issue is with current year. as the value for aug is blank the line chart drops to zero on the y axis. What i want to achieve is that as i am not yet in aug and my current fiscal yera period is jul i dont want the line to drop to zero. in this case i want it to be just a dot on y axis depending on the value. Once my current fiscal year period is aug i want a line from jul to aug only. In the current senario if my current fiscal year period is aug i will have the line from jul to aug but then drops to zero on y axis for sep. I dont want that to happen.
Hope iyou understand what i am trying to explain.
Thanks for your reply.
Ravi.

Precalculated web template w/control query

I create a precalculated web template with settings:
1. Data
2. HTML web pages
3. Control query
I scheduled the package. How do I access the views from control query in Web Template URL?

Hi Raynald,
1. When you marked "HTML web pages" then "Data" are calculated automatically.
2. the html-pages can you see in RSRAPS.
3. To started this page in IE:
- see the index.htm
- http://ipaddress:prot/sap/bw/BEx?sap-language=%20&bsplanguage=%20&CMD=LDOC&TEMPLATE_ID=ZQUERY&DATA_MODE=STATIC&filter=...
Sven

ABAP Interface for Web Template Design

Hi BW Gurus,
I have report published in the portal through BSP. Please some advise me what are the ABAP class files so that I can design my portal reports.
I am sure there are few class files where I can design the portal reports. Let me know your important help....
Thanks
Ganesh Reddy.

Ganesh,
CL_RSR_WWW_MODIFY_TABLE is used to customize the web templates in BW3.x.
the way I understand the data flow to web templates work is :
Query(s) --> Web Template class --> HTML --> <CL_RSR_WWW_MODIFY_TABLE - this class is optional >
This works only for Web templates though - as for classes that are used in web templates - create a web template and then assign the same to a request - you will find the classes available under that request under PHIO or something like that.

Assiging Query to Web template

Similar Messages

Maybe you are looking for