Assigments to jump from BW-query to BP transaction

Hello,
I would like to know what assigments I should do in RSSB transaction to be able to jump from a BW query to BP transaction (CRM).
Thanks in advance.
Carmen

Hi,
The transaction code is RSBBS.Here you have to set the source query and the source target. and set the target to your BP transaction(CRM). The parameters depend on the way you want to have your jump.
Hope this helps.
Assign points if useful.
Regards,
Kiran

Similar Messages

JUMP (RSBBS) from a query on a transaction(local)

Hi,
Can You help me ?
I want to do a jump from a query on a transaction RSDMD (on local system).But particullary, I want to put in parameter the data (doc number) with wich I jumped.
So How I have to define the assignement detail in RSBBS for the transaction RSDMD?
Because, for the moment I have a popup where I must fill the name of my charactéristic and after the number of my doc number (for example), and it's with the doc number that I do my jump.
But, I don't want to fill characteristic and doc number, I want that it's automaticaly...
Thank you for your help...
Carine.

Calling the RRI with a transaction or an ABAP/4 Report as the receiver is done with the RRI
from the SAP NetWeaver Application Server. This is possible in an ERP system, a CRM
system or within the BI system. The selections are prepared by the BI system that does not
recognize the transaction or the report. The assignment is transferred from the RRI of the
SAP NetWeaver Application Server using inverse transformation rules. There must also be a
complete chain from the DataSource of the source system to the InfoSource, through
transformations up to the InfoProvider. This does not mean that data absolutely has to be
loaded using this chain. If this chain does not exist, the RRI cannot transfer the selections to
the source system. Calling the RRI only works for fields with dictionary reference. For ABAP reports, this means that the parameter has to be PARAMETERS param LIKE <table_field>
For transactions, this means that the Dynpro has to have a dictionary reference. Not every
transaction can be called with the RRI of the SAP Application Server.
These are the steps to do this
If you want to jump from a Web application to a transaction or ABAP/4 report using the
RRI, an ITS for the target system has to be assigned beforehand.
● The value of the input field to be supplied must be known at the time of the jump (for
example by entering a single value on the selection screen of the sender or by the
cursor position at the time of the jump).
● Sender and receiver fields that correspond to one another generally must link to the
same data element or at least to the same domain, otherwise the values cannot be
assigned to one another.
● The assignment of sender and receiver fields must always be a 1:1 assignment. For
example, the transactions called from the start screen cannot have two input fields of
the same data type. Then it is not clear which of the fields is to be supplied, which
means neither of them is supplied.
● There has to be a complete chain from the DataSource of the source system to the
InfoSource, through update rules up to the target.
Proceed as follows after you have created the sender-receiver assignment as described
above.
1. As the type, choose Table Field. The columns Field Name, Data Element, Domain and
Set-/Get Parameter become input ready.
2. Specify the field name, data element, domain and parameter ID for the receiver
transaction. You need to know this information because input help is not available. You
can usually find the parameter ID in the ABAP dictionary entry for the data element.
If this does not always make jumping to the transaction possible, it may be necessary to
program a short ABAP start program. For more information on how to do this, see SAP Note
number 383077

Jump from bex Query to cprojects application

Dear
I'm facing following problem.
We would like to jump from a Bex Query to a Cprojects application.
In our Query the project ID is our infoobject that we want to use as key field in RSBBS but the destination is a Cproject application (Web portal) .
I've received an URL where the application is stored but it seems that the Cproject application can't be called from BEX.
Any help is appreciated

hello,
have you verified that the source system has its ITS functioning, the RFC and logical systems defined.
Make sure the source ITS name is maintained in the RSBBS_RSRR_URL or TWPURLSVR table.
The OSS note 771351 gives details about the details for the configuration.
Regards,
Dhanya.

BAdI SMOD_RSR00004 for Jump from BW Query to R/3 transaction

Hi,
I have to create a jump query to an R/3 transaction. The I/O 'Object key' in the BW corresponds to the r/3 field OBJKY of the NAST table. After trying out all the possibilities/ assignments in RSBBS(BW) also its not working.
Can anybody pls guide me how to implement BADI for this type jump query(RRI for Transaction).
Thanks in Advance,
Sandy.

Hi Gurus, Any help on this pls...

RSBBS: Jump From BW Query to SAP Query

Hi
I have a cost center analysis report in BW which has an option to jump to R/3. When I type the transaction RSBBS and give the name of the query, the Receiver application is 'QU' (Sap Query) and the receiver object is 'GZ_BW_INTGRTYZISQ_CCA_Q01' which I am presuming is the query to which the Cost Center analysis report in BW is jumping to.
How do I view this SAP query and if necessary change it. I have tried tcodes SQ01, SQ02, SQ03 and none of these recognise the above mentioned receiver object
Kindly advise.
Regards
Sheily

the best way to figure out is to ask ur functional guy the Tcode to get there. it could be anything.

Problem in query jump from one sender and two receivers

Hello all,
My requirement is to jump from one query to another two queries. The sender comes from infoCube A and receivers comes from ODS B and ODS C (ODS C is a copy of ODS B). The problem is that when I execute the first jump a pop up appears with a selection date. This issue does not happen when I execute the second jump (and the selection date is needed). Target queries are identical, and I don´t know what is happening.
Any ideas?
Thanks in advance.
Carmen

Hi Carmen,
I think you have used the same variable for the day selection for the query on ODS C and ODS B. Hence when you fill it for the first time it does not ask you at the second instance.
Regards.

Jump from query

HI Gurus,
I have to develope a query where i have to jump from BI query to ECC. In my report There are two fields one is account and another is account number. If i click on the document number i have to go to an ECC transaction diplaying data about that document and if i click on the account i have to go to another ECC transaction displaying data about account. I know that we can jump from BI query to transaction, but is it possible to jump from one query to 2 different transaction? if so how to do it?
Regards,
Raghavendra.

Hi Raghavendra,
In the RSBBS t-code, give the sendor reprot name then click on create button.
Then select transaction and sourcesystem and then the T-code you need to enter.
Then after save the setting. goto Assignment details. Click on the field for which you need to assign that transcation.
Then create another one and select transaction .. provide the details as above and in assignment provide the details.
Ex: for G/l account you can assign the FS03n T-code on r/3.
for cost center you can assign the KS03 t-code on r/3.
Hope it helps...
Regards,
Ravi Kanth

BEX Query to ABAP Transaction Code

Hi,
RRI from BEX Query to ABAP Transaction Code When I Right clivk and select GOTO on my Delivery order
say 120012 It shd directly go into tht particular DO The transaction code is vl33n
but when i give ABAP Transaction as reciever object it only goes to the initial screen of query where we manually need to give the DO Number It does not show the DO 120012 directly
thx,
amar

Hi Amar
Try doing Assigning Infoobject to R/3 field in Assignment details RSBBS transaction:
Check below thread for explaination
Re: RRI - Selection was not Restrcited
Ravi

Jump to BP transaction from bex query

Hello all,
the client I´m working for wants to jump from a bex query to BP crm transaction. I implemented that using RSBBS transaction, but when I execute the query --> Right mouse click --> Go to --> transaction (BP) system goes to a web page; The issue is that I want to access BP transaction via SAP GUI, not via web. Is that possible? If so, what is going wrong?
Thanks in advance.
Any documentation or example will be appreciated
Carmen.

Hello,
You can see the SSO using the transaction - RZ11 SSO Profile Parameter
Also See this
[SAP Network Blog: Long texts in SAP BW: Modeling|/people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling]
[SAP Network Blog: Long texts in SAP BW: Modeling Follow Up|/people/sap.user72/blog/2006/06/03/long-texts-in-sap-bw-modeling-150-follow-up]
[SAP Network Blog: Long Texts in SAP BW: Displaying in BEx Analyzer. Introduction to Excel Workbooks Formatting. Part I.|/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i]
[SAP Network Blog: Long Texts in SAP BW: Displaying in BEx Analyzer. Introduction to Excel Workbooks Formatting. Part II|/people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-ii]
Thanks
Chandran

Jump from (RRI) BEx query parsing infoobject without MD to source system

Hi!
I have a snag that I hope someone out there will be able to help me with. I have a query that cointains purchasing line items. I want to jump from a purchasing order number in the query to transaction me23n (display purchasing order) in the source system.
This works fine in the portal (don't ask me why there's a difference..) where ECC is launched as a new portal window and the data is parsed correctly. But when attemting to do the same in BEx Analyser the system pops a dialog demaning that I choose which infosource should be used for reversing the infoobject into the proper ECC table field...
Now the infoobject is 0REF_DOC_NR, and it doesn't have any masterdata or texts.. so there is no "papertrail" for the system to follow back to the source.
In RSBBS the I have selected delete for all other infoobjects and set the line for 0_ref_doc_nr like this:
InfoObject: Reference Document Number, Type: Table Field, Field Name: EBELN, Selection Type: Parameter, Required Entry: X, Data Element: EBELN, Domain: Blank, SET/GET Parameter: BES
Any tips?
Regards
Ola

Hi,
i have replied wrong,
i mean that
when i am trying this,
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID (for drill down on particular field, i.e. open the URL with this field value entred from sender query's field shopping cart number)
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID='selected number value'&GS_HEADER-OBJECT_ID=10000456
and when try this:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
with field assignment: shopping cart number = GS_HEADER-OBJECT_ID
result is coming: http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN&GS_HEADER-OBJECT_ID=10000456
but not skiping the initial screen.
Thanks.

Query Jump from Bex Analyzer to r/3 transactions: error of web server

Hello,
I have created a query jump in the RSBBS transaction to go in R/3 through a Bex Query. When i choose the jump in the query anayzer I have the error message:
<b>No Web server maintained for the presentation of log. system.</b>
Do you have ever had this message? what is the solution? why do my bex anayzer use a web interface to connect in R/3?
Thanks a lot!
Julien

Hi
this may be possible by using an openDocument URL.
http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_url_reporting_opendocument_en.pdf
Still you have to configure the auhtentication connectivity between BOBJ and SAP Backend in the BOBJ CMC console.
And setup the SSO option in the database configuration panel of your CR reports (this has also to be done in the CMC, just go to Folders, navigate to your report and invoke the context menu. You have to scroll to the the bottom of the panel in order to find the SSP option)
Regards,
Stratos

Warning message on jump from a BI report

On jump from a BI report to another (from any characteristic or key figure), following warning message comes up in the second report "Source selection for 0FISCPER incompatible for target selection". This is user specific, not all users are getting this message. It is not an authorization issue. Please provide your thoughafter and soughtafter suggestions.
Edited by: Suprabhat99 on May 18, 2011 3:23 PM

Hi Suprabhat,
Please check if all the Query restrictions like variables,selection options,interval,hierarchy etc is same for Source and Target Query for that paticular char - 0FISCPER.
Then Incase there is no discrepancy in above types then please check SAP note 1265027:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323635303237%7d
Also below forum should help resolve your issue :
Re: Jump Query
Regards,
Akanksha

RRI Problem : Variable Screen Popup while Jumping to Target Query

While jumping from Source to Target query (both are BEx queries), Variable Entry Screen of the Source is popping Up again during Jump, which after pressing Execute (F8) without entering any values, displaying Target Query results correctly. My Target query is having one and only variable on Inv Doc Num of type Replacement Path and I am not supposed to get any variable Screen Popup during Jump. How can I suppress this reappearance of Variable Screen??. I have tried with Delete Options etc in RSBBS Assignment rules and searched for OSS Notes but not succeeded so far. I am on BW3.50 SP20. Any help will be highly appreciated.

Hi Jr,
I am not having the same variables in the Target at all. In fact the characteristics for which variable screen appears in the source are not there in target. I mean Posting Date, Billing Month...Etc are not ther in the Traget. In the Source Query Rows, I have Inv. Doc No as one of the Characteristics.No variable is defined for Inv Doc Num in the Source Query.
I am not getting your question"From which cell..??". If I select any perticular Cell in the Inv Doc Result Rows of the Source Output, During Jump it will return only the details of that particular invoice only? Is itn't?. But I want details of all those invoices, that appesrs in the Source Output. That is why, I am selecting my Jump target from the GOTO botton (Red Arrow like Symbol in BEx Tool Bar), and choosing my Target.
Thanks

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

RRI Jumps from Different Characteristics Produce Different Results

Hi experts,
I am having the problem that when I jump from different characteristics in the same row in sender query, I got different result sets. E.g. when I choose "Go to" from the "Name" char I got one record, but from "Transaction Description" char multiple records.
Could anyone please clarify this problem?
Thanks,
Joon

Hi,
check the info object mapping in RSBBS.   some time same kind of charactorstics is available in the destination report it show such kind of error.
Eg.   0customer to 0ship_to_party , or sold to party ect.
Just go to RSBBS
select the type as infoobject ...
Field name   = target field
for more clarification please refer below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
regards
bvr

Assigments to jump from BW-query to BP transaction

Similar Messages

Maybe you are looking for