Assign a New Report Painter Layout to a Transactions

Dear all.
    I have created a New Layout ZPT-ACTIV-01 by copy the Layout 0PT-ACTIV-01.
    I need to created a new transaction. I Copy the transaction S_ALR_87012258 to ZS_ALR_87012258. Because a create a new Layout ZPT-ACTIV-01 e need to change the Default Value
D_SREPOVARI-EXTDREPORT = FBR 01RFRRS02 ZPT-ACTIV-01                .
But When i'm saving the transaction the following erro message appears "Do not use blank characters"
Best Regards
Thanks In Advanced
Pedro Miguel Rodrigues

No, i don't have any aditional Space.
But, i think that this problem is only occurs in my SAP Version ECC 5.0.
Best Regards
Thanks in advanced
Pedro Miguel Rodrigues
This problem was solved by implementing the OSS Note 871039
Message was edited by: Pedro Rodrigues

Similar Messages

REPORT PAINTER LAYOUT

Adding data columns to report drill down table
Technical code - ZFI131 - Report Painter
YTD CCA-REP GRP & CST CNTR CRP VAR: Selection
Enter 2011, 2,2,,0 Group 12021862
YTD CEG_CCA-REP X CCG_C10001
Select - Manufacturing Activities, Drill down into actual "Labor Activity" number.
Drill down into total (Yellow value) (Cost Centers actual line items)
//JLD_SUPP SUPPLIES LAYOUT FOR COL HEI
Each line of this report has an aaociated Material number, Resource and yield and UOM. We need to be able to add the Material, Resources, Yield, and UOM on the tabluated report.
in the above report it is linked with KSB1 tcode there the above layour has been used. in the standard layout there is no resources and yield field is available. how to bring and why it is not available in standard layout field list. is there any performance issue leads into that? and also material field no material number is not pulling.
Can you tell me why this is happening and why those fields resources and yield where not available in standard layout?
Regards
Laxmi

You can pretty much do most of what your colleague is enquiring about.
1. Create a report library GR21
     -   Table name: E.g GLPCT. You can copy an existing library and modify.
     -   Description: E.g Branches P& L Reports
     - Check off the characteristics he wants
     - Check off key figures
     - Check off basic key figures.
Define sets and variables if need to with t-codes GS01 and GS11 respectively.
2. Create a report group GR51
3. Create report either using GRR1 or GR31
   - Enter the library you created above
   - Enter report name
   - You can copy from an existing report and make changes to your likeness
   - Define you general data selection
   - Element definition which is the columns and rows
   - Click on Extras and define report headers
- Click on Formatting to format columns and rows
4. Assign report to report group created earlier on.
The above guidelines are the basics on how to proceed.
Refer back for any further clarifications.
Elias
Edited by: Elias Akorli on Nov 24, 2009 2:16 PM

Report painter layout variants

Dear sirs,
a colleague of mine needs your experience. Our customer needs us to create some Report Painter reports with the possibility to change the layout. Is this/ something like this possible?
An example would be to pick up the columns or to change number format: see numbers in units or tousands of units. Something like ALV variants/ layout?
Any customizing option or workaround would help, thanks Otto

You can pretty much do most of what your colleague is enquiring about.
1. Create a report library GR21
     -   Table name: E.g GLPCT. You can copy an existing library and modify.
     -   Description: E.g Branches P& L Reports
     - Check off the characteristics he wants
     - Check off key figures
     - Check off basic key figures.
Define sets and variables if need to with t-codes GS01 and GS11 respectively.
2. Create a report group GR51
3. Create report either using GRR1 or GR31
   - Enter the library you created above
   - Enter report name
   - You can copy from an existing report and make changes to your likeness
   - Define you general data selection
   - Element definition which is the columns and rows
   - Click on Extras and define report headers
- Click on Formatting to format columns and rows
4. Assign report to report group created earlier on.
The above guidelines are the basics on how to proceed.
Refer back for any further clarifications.
Elias
Edited by: Elias Akorli on Nov 24, 2009 2:16 PM

Creating a new report painter library

Hi all
I have created a z table for the verification of FI-CO values to use with report painter. This table is modeled like the GLT0, the only difference is that my program fill it with the values of secondary cost elements (for production direct costs). So in the table I have records of accounts defined in chart of account and records with only CO elements. I have created the library using GLT0 as template and created the user exit for take the definition of cost elements and FI account in the same process. All work well the only problem is that for the cost element the values aren't displayed also if present in the table.
I supposed in some point the extraction of values is linked to a control of presence of account in FI (SKA1 or SKB1), but I don't find the point.
Someone has some ideas?Thanks
Davide

First, you don't so much want to back up the library, you want to archive the unwanted items. When archiving you should archive to two separate drives because there could come the day when you plug in the single archive copy and the drive doesn't start.
Why not just archive a copy of the library as it is now, then delete the items from the library on the computer? Don't bother making a new, blank library.

FSV not assigned accounts in Report Painter

Hi
I created one report through Report painter for Balance display.
After Execution of the report in Drilldown many Balance sheet G/Ls are showing as not assigned in the report.
As they are assigned in the Financial statement version.The G/Ls not assigned are the Balance Sheet G/L.
Thanks

Hi,
Can you please check the financial statement version which might have been included in the general data section of the report or the column characteristics. Also check the row element/ cell element defination.
Regards,
Gaurav

How to add another new report painter in existing T-code?

HI,
Can someone guide me, how to add a report painter report ZAL into a existing T-code?
My T-code contain 2 report, now i wish to add a new one. So when user execute this T-code, we can see these 3 report.
Thanks

Hi,
add the new report to the report group (T-code GR52) where the 2 already existing reports belong to.
In report painter you don't execute a report but always a report group including one or more reports.
Best regards, Christian

Report painter issue -relating to transactional currency

Hi Floks,
I have seviour problem in Report painter . i copied one existing z report its working on CO currency based i modified little more its comming as transactional currency[GBP,USD,AED] based equivalent to CO currency [USD]. my requirement is Transactional currency based one. i want to print what are the values existing in TRansactional currency i need to display . where i can modify relating to this [key figure ] or new enhancement .........
could please help me out........
Thanks ,
Suresh

Solved

Report painter,cross company code transactions

Hi Masters,
1, Please send material of REPORT PAINTER ?
2, Please Send material of CROSS COMPANY CODE TRANSACTIONS
3. Please send material of FUNCTIONAL SPECTS
my mail id [email protected]
Thank you friends

Hi,
Hi,
Cross-Company-Code Configurations
Step1: T Code: OBYA
We have to maintain Receiver Company Code as Customer in Sender Company Code and Sender Company Code as Vendor in Receiver Company Code. Then problem will be solved.
Step2: T Code: OB60
There you can find 4 line items, Copy all the 4 Line Items using Copy As button and customize to your company code.
Cross-Company-Code Transactions
1. To Change Cross Company Code Document: T Code: FBU2 - Change
2. To Display Cross Company Code Document: T Code: FBU3 - Display
3. To Reverse Cross Company Code Document: T Code: FBU8 - Reverse
regards,
Santosh kumar

Let user assign header for Report Painter Report

Hi all,
I would like to let the user assign the header while generate the report.
(Because the report is somewhat dynamic)
Here the details of my requirement:
1) Let the user input the header text in the selection screen of the report
2) Display the inputted text as the header ( Which setup at GRR2 via Extras > Rport Texts -> Headers)
Or any possible dynamic method will be welcome.
Tried to define a variable for this, but unused variable will not show up for selection when setup header
Regards
Bill

Bill --
are you writing an ALV report ?
if yes, you try something like this--
START-OF-SELECTION.
PERFORM SET_TITLE USING TITLE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
*      I_INTERFACE_CHECK = 'X'
        i_callback_program      = gd_repid
*      i_callback_top_of_page = 'TOP-OF-PAGE'
**      i_callback_user_command = 'USER_COMMAND_ALV'
**       I_CALLBACK_PF_STATUS_SET = 'ZSTATUS_MUSTER'
        it_fieldcat             = fieldcatalog[]
        i_save                  = 'X'
        IS_LAYOUT                = GD_LAYOUT
        is_variant              = g_variant
         I_GRID_TITLE           = TITLE " Gives the Title to the ALV report.
      TABLES
        t_outtab                = IT_MUSTER
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
FORM SET_TITLE USING TITLE.
TITLE = <YOUR TITLE ON SELECTION SCREEN>
ENDFORM.                    " SET_TITLE
Regards,
Sumit

PPM 5.0: Assign cProjects New Status to Project Mngt business transaction?

hello Experts,
In SPRO -> Project Management -> Basic settings -> Create/Change Status Profile for User Status, I created my own status profile and assigned them to object types.
Now, for status synchronisation, i need to map Project / Initiative Business Transaction to DFM Business Transaction
( SPRO -> Portfolio and Project Management -> Portfolio Management ->Base System Interfaces -> Decision Flow Management Settings -> Status Synchronization -> Map Project / Initiative Business Transaction to DFM Business Transaction)
My question is :
How can I create my own Project Management business transactions?
if is not possible, how can i assign the standard ones (DX01, DX02, etc) to my own status (ZST1, ZST2, etc) ?
Thank you in advance,
Amal

Hello,
Check the trasnaction BS32 for adding new business transactions.
Cheers
Amit

Add new key figure with characteristics in report painter

Hi expert,
I am create a new report painter in GRR2 under report group 8A2 (EC-PCA: Standard Reports) and i would like to create a report show on G/L amount with segment.
When i click on first column to assign "key figure with characteristics" i am not able to find characteristics "segment".
Please kindly advice how to create in new characteristics in report painter?
Thanks.
p/s : profit center number is same with segment number
regards,
ng chong chuan

Hi,
"segment" is not a characteristic of classical profit-center accounting (libraries 8A*). Its a New GL characteristic, thus create a report painter report for New GL library.
best regards, Christian

New column with formula in Report Painter - GRR2

Hi gurus,
I want to insert a new element in my new report painter created by GRR2. I took a standard report and I copied the report. I know how to insert a new element.
The problem is I want to choose the value of a field in PROJ table for create a formula in my report. The users insert a value in user-define fields of CJ20n, and i would like to choose this value for create a formula in my report.
Can I create a formula to take this value from the table PROJ? If I need to create a characteristic for choose this field, as I can create?
Thanks.

Hi,
My question is:
Can i pick a value of a table (proj) for use in formula of report painter??
Many thanks.
Regards.

Report painter: include new Field

Hi Experts,
I would like to create a new report painter based on table GLPCT data.
But, I would like to include this field CCSS/KSTAR in this report. I have create a new variable ZKSTAR for this.This variable is not included in table GLPCT.
I don't know how to include this variable in my report.
Please help,
Baki

Hi,
KSTAR is cot element, which is not a part of PCA document, stored in GLPCT as totals. You should use RACCT (account) field for this purpose.
Regards,
Eli

Report Painter - Download Capabilities

Greetings - Does anyone have any experience in downloading reports in bulk from Report Painter? The scenario is that we want to create a new CO report, Plan vs. Actual by cost center in a different format then SAP standard. We then want to be able to run the report for all cost centers and then have each one downloaded at the same time individually so we can then send them out to each Manager of the individual cost center.
If anyone has any insights to this, that would be great.
Thanks,
Jim

http://www.sap-img.com/sap-fi.htm
<b>Report Painter</b>
Report Painter, How to reverse +/- signs
Library for Report Painter/Writer
Rept Painter, changing the tables assigned to libraries
Report Painter, Relationship with Rept Grps & Repts
Regards,
Rajesh Banka
Reward points if helpful.

Report painter -output parameters,Data source,Extract parameter, report

Hi expert,
1)What report painter -output parameters,Data source,Extract parameter, report mean for and what are the difference?
2)I have create new report painter and transport to Test server using T-code:GCTR and I find that the T-code always point to old report. As I had check the SE93 the D_SREPOVARI-REPORT is point to report group.Why this happen?
3) Does creation of new report or modification of the report always need to select the extraction option so that it will able to display the relected changes? Because, I have done modification on the report but it is not reflected the changes even i save until i have to create the extraction is able to display the report but every time i run the report need to select the extraction with option to choose new extract or old. Kindly advice how to save and create the report painter and save will display reflected result .
Please help

Hi BR Christian,
Thank you for the prompt reply.
I have few querys as below:
1)Do we every time create new report by copying the existing report painter need to select output parameter, data source and extract parameter in order to be able to display the new report?
2)when modify existing report painter and save it do we need to select output parameter, data source and extract parameter in order to be able to display the modify report correctly?
3) What are the different between right click copy the report inreport painter compare with create report painter with copy GRR1?
4) What are the T-code for modify the report group?
5) When I create a new report with the right click copy in GRR1 and modify the report painter column only and everything remain the same just the report name different why when execute the report it always appear in the selection screen with report button which have option button to select the 2 version of report which one is the destination report that I copy from and one is the new report? How to set the report when execute will only display the new report only without need to select the option with just new report only?
6)For transferring reports you can use GR37 (export) and GR38 (import) can be use to transport from one client to another client? What is difference between GR37 compare with GCTR?
7) If I use GR37 and GR38 it is mean no need to create the transport request which as usual we create transport se10?
we can directly import to another client ussing GR38?
8)When we create a new report with copy with the existing report with just modify the report colunm and the report name difference only what are the setting example: report,report group need to be selected to be include to export/transport to another client?
9) What are the difference between library and report group?
10) Can we set Se93 to execute only report not report group? How?
11) when using GR37 to transport it is also include the report group,library and the particular report?
12) Can I include the variable in the column header to display fiscal year which I have selected from the selection screen?
How and which variable should i use?
please help.
many thanks
Edited by: KH on Jun 18, 2011 6:52 AM
Edited by: KH on Jun 18, 2011 6:55 AM
Edited by: KH on Jun 18, 2011 7:06 AM

Assign a New Report Painter Layout to a Transactions

Similar Messages

Maybe you are looking for