Assign a report to a work center

Dear Experts,
I would like to add a report view to my custom work center. Do you know why this error message appeared? What is the condition for a work center to be used for report assignment?
Many thanks in advance
Cheers
Linh Hoang

Hello Linh,
I would suggest you the following, in order to be able to assign a report to a Work Center View you need to create stable anchors for your WoC view in the UI Designer.
The ReportAssignment-Anchor can be added via UI designer. Plus, the work center view subtype should be "Application".
For even more details, you might refer to help description: Developer Desktop => Analytics => Business and Technical Background => Defining Analytics Content
I hope it helps
Cheers
Tales Caron
Support Engineer

Similar Messages

Assignment of activity group to work center

Hi,
We want to assign activity type to work center more than six,
how we can assign activity type more than six to work center?
i have created activity type group in klh1,
in activity group i have assigned activity type more than six,
How we can assign activity type group in work center?
Regards
Gajjen

HI
It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
Check with the business process field for assign with your CO guy in thw WC.
A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Check and revert
Regards
Anupam Sharma

Error when assigning the personnel no to work center

Hi,
I have uploaded the HR mini master.Now when I am trying to assign the personnel no to work center it gives me an error as to no objects found. Although I am able to see the list in F4.Checked the validity of both the masters (HR and WC).
Please suugest!
Regards,
Meghana

Hello,
Have you tried to assign personnel number one by one ?
You said you checked the validity for both WC and HR.Did you mean you checked the validity of personnel number you tried to assign ? Also check the relationship period in the pop up screen before F4.
Regards,
Deepak

Attendance Report based on Work Center

Hi All,
Do we have a standard report of getting the attendances/Abscences of an employee based on Work center.
Either if it can be done by CATS also is fine.
Kindly suggest.
Thanks

Hi,
You can run the program RPTABS20 and in the further selection field u can add the org unit for your work cente.
Regards,
Kapil Kaushal

How to Assign Person (Personnel Number) without work Center

Dear All,
How to setup personnel number in order not using general and internal work center in operation service order area?
if i use work center, it make HRD site and payroll will be damage
please help me if you have any solution?
Thanks
Rendra Rizki

dear all,
When i tried to use co11n , the earning appearence :
You want to confirm a network/order of the order type FEN1. However, this order type is allocated to an order category whose confirmation is not intended in this transaction.
You try to confirm a network using a transaction intended for confirming production orders. Since networks and production orders are assigned to different order categories, the system issues an error message.
so i still can't use this tcode, do you have any?
Thx

How to assign Asset number to PP work center -reg

Hi,
When we create PP Work center through CR01 can we assign the asset number ?
or while creating asset number through AS01 can we assign the PP Work center ?
Our major issue is
FI : ASSET
PM:Equipment
PP: Workcenter
we are not able to link . we need to have same cost center for all the three . but as of now we dont have the link for the three and what ever cost centers we assignsystem is accepting
how to solve this ?
i could not find any fields in work center either to assign asset or equipment ?
only in equipment i can give PP work center but how it links all the three Asset , Equipment and Work center ?
regards,
madhu kiran.

HI
In euipment you can assign the PP work center and from the asset AS02/AS03 go to environment > additional amster data > you can get the cost center assigned to asset fro this you can relate the cost center to all three.
Hope it will help u
Rgds
Anupam Sharma

Routing fm for assign ing the materials to work center

Hi all ,
I have exploded all the sub components of the BOM of a given material number and plant .
Now i have all the details , now i would like to assign these materials to workcenters available for a finished product in ROUTING process .
Is there any FM to assign the corresponding components to corresponding work centers in the routing process , so that we have to get the finished product in optimized way .....
Please let me know you view....
if there is no FM , let me know you suggestions ...
Regards
Raj

this is one the fm's , c_x is X
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
    CAPID                       = 'PP01'
    CUOLS                       = 'X'
    DATUV                       = sy-datum
    KNFBA                       = c_x
    KSBVO                       = c_x
    MBWLS                       = c_x
    mehrs                       = 'X'
    mktls                       = 'X'
MKTLS                       = 'X'
    MDMPS                       = c_x
    MTNRV                       = p_matnr
    WERKS                       = p_werks
IMPORTING
TOPMAT                       = l_topmat
DSTST                       =
TABLES
    STB                         = it_stb
MATCAT                      =
EXCEPTIONS
   ALT_NOT_FOUND               = 1
   CALL_INVALID                = 2
   MATERIAL_NOT_FOUND          = 3
   MISSING_AUTHORIZATION       = 4
   NO_BOM_FOUND                = 5
   NO_PLANT_DATA               = 6
   NO_SUITABLE_BOM_FOUND       = 7
   CONVERSION_ERROR            = 8   OTHERS                      = 9.
regards
Raj

Assigning all the components to work center

Hi all ,
I have exploded all the sub components of the BOM of a given material number and plant .
Now i have all the details , now i would like to assign these materials to workcenters available for a finished product in ROUTING process .
Is there any FM to assign the corresponding components to corresponding work centers in the routing process , so that we have to get the finished product in optimized way .....
Please let me know you view....
if there is no FM , let me know you suggestions ...
Regards
Raj

Hi just check this link
Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
IDOC Packaging and mapping Techniques
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part1)
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
Introduction to simple (File-XI-File) scenario and complete walk through for starters (Part2)
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
and
Useful thread for Beginers XI
Re: Beginner in XI
reward if helpful
Regards
Sachin

Work center reporting

Hi,
In our system in transaction OP4A lot of ‘Shift definations’, ‘shift sequences’ are maintained unnecessary. We want to clean this data (Remove unwanted).
Is there any report available for work center like 'where used' function to identify shift pattern, sequences used in system so that I can remove other data.
Regards,

Hi Caetano,
Thank you for your help, as you suggested I can check 'Shift Sequence' at table level.
Still the problem is we have to remove unnecessary shifts defined in system and it is possible to assign defined shifts to work center intervals directly means without giving 'Shift sequence' as input.
Is there any table available where I can get the 'Shifts' assigned to work centers?
Regards,

CNR2-assign person to work center error: the cost center is deleted

Hi guys,
i have a problem with assigning a person to a work center using CNR2.
i select the person and i add it but when i hit SAVE i get this warning message:
"RP718: a segment could not be derived". the person will then be allocated to the work center BUT when i check in PA30 i can see that the persons cost center is DELETED :O.
could you please help me with this? i tried a lot of scenarios but i could still not find the answer.
thanks,
emi

Hi
Cost Center must be maintained for that person in HR master data. Please have your HR person look into this and maintain the data and try again. Cost center and Atype of that person would bring in actual costs (equivalent of hours) on the receiving objects when time sheet is being recorded.
Regards,
PSR

REPORTS FOR WORK CENTER EFICIENCY

Hi All,
I´m trying to find reports that shows work center eficiency. Anyone knows any standard report like this?
Regards,
Felipe Tavares

Dear
If you are looking for Work Centre Effiency report , then you should check the Utilisation of Work Centre in production in every months or you can compare the production actual and planned by work centre to know the effiency .
Some of the standrd txn :
1.MCPQ
2.MCP7
Customised report : http://www.onestopsap.com/sap-PM/compare.asp or with the following SAP Table :
WERKS         LIKE AUFK-WERKS,                     "Plant
      AUFNR    LIKE AFKO-AUFNR,              "Prod. Order No.
      PLNBEZ   LIKE AFKO-PLNBEZ,             "Header Material No.
      GSTRI      LIKE AFKO-GSTRI,              "Actual Start Date
      GLTRI      LIKE AFKO-GLTRI,              "Actual Finish Date
      GAMNG    LIKE AFKO-GAMNG,             "Prod. Order Qty.
      AUFPL      LIKE AFKO-AUFPL,              "Planned No. Of Operation
      AUART    LIKE AUFK-AUART,              "Order Type
      BUKRS    LIKE AUFK-BUKRS,              "Company Code
      OBJNR    LIKE AUFK-OBJNR,              "Object No. For Order Status
      KDAUF    LIKE AUFK-KDAUF,              "Sales Order No.
      KDPOS    LIKE AUFK-KDPOS,              "Sales Order Status
      IDAT2      LIKE AUFK-IDAT2,              "Order Completion Date
       ISM01   LIKE AFRU-ISM01,              "Required Qty.
      VGW01    LIKE AFVV-VGW01,              "Quantity Withdrawn
      VGE01    LIKE AFVV-VGE01,              "Unit Of Measure
      EFFPERC LIKE AFVV-VGW01,              "Eficiency %age
      MAKTX    LIKE MAKT-MAKTX,              "Material Descriptio
Try and come back
Regards
JH

How to assign work center to class

hi any one tell me how to assign w c to class

Mukesh,
In the Workcenter Create(CR01) or Change mode (CR02), in the basic data tab down you will find a function button "Classification" hit this button, system will prompt for Class assignment.
Class Type for work center is 019.
Regards,
Prasobh

Link between HR data and Work center

Dear experts,
We have assigned operators in work center through HRMS. For the purpose of making a report we require the table into which the linking of work center data and the employee is made.
In the table CRHD a field HROID is found. This is an object id which links the work center with a table either in HR or in PP which provides the link between organisational unit/ employee. Can anybody tell us the name of the table with details?
Please help us.
Thanks
Jaikishan

Dear Vittalji,
Thanks for your prompt response.
Our requirement is as follows:
We need to create a report on details of operations done by each operators / workers for a specified period. For this purpose following assignments are done.
(HR module is not implemented yet. But we have made attempt to maintain the employee master by customising HR module little bit)
1. Employee master created in HR.
2. Went to work center maintainence (CR02).
3. Selected HRMS button.
4. Selected Work Center option.
5. Clicked on HR work center
6. Given same work center as production work center.
7. Selected 'person' from ALV list data
8. Clicked on create relationship button.
9. Assigned the appropreate persons.
By doing assume this we made assignment of persons to this work center since the name of persons are getting displayed.
We have a report to list out the workcenter wise operation confirmations for analying the daily production.
Now we want to incorporate the operators (persons) name into our report by whom the operation/production was performed.
For this purpose, while refering the table CRHD, found a field HROID (an object id). To fetch the details of persons / operators those we assigned to the work center we need the tables for linking this field HROID.
Our questions are
1. Whether the process of assigning operators above mentioned are correct?
2. What are the table-links for completing our report. i.e. only for work center to concerned operators (HR).
3. What does the HR Work Center mean?
4. What are the difference between HR work center and production work center?
Your help is requested. Points will be rewarded promptly.
Thanks and Regards
Jaikishan

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Work center selection during UD

harhe e Hi,
We have the following scenario,
Production guys confirmed order confirmation or make backflushing confirmation to update the WIP/FG stock,
then quality cleared such stock through posting to unrestricted or blocked stock or rejection store location,
Quality person requires during UD posting ,work center/Machine selection should be there in QA32 transaction,
so that the analysis could be made for the work center,
Best Regards,
Devendra

Using Inspection Point assignment, you can record the Work Center / Machine.
But with Inspection Point, you can't have F4 selection option in standard. You have to type the Work Center code manually which may prone to error.
You can check for some user exits to define Sub screens to pop up.
QEEM0029 User-Exit for Characteristic Overview Subscreen
QEEM0030 User-Exit for Subscreen: Characteristic Single Screen
QEVA0004 Exit for changing information line in usage decision header
QEVA0005 User subscreen for displaying add. data for usage decision
QEVA0006 Entry to usage decision transactions

Assign a report to a work center

Similar Messages

Maybe you are looking for