"Assign access control" not appearing under Essbase in shared services

Hi Everyone,
Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
DB Server: Essbase and SQL Server
Essbase is on Shared Services mode.
This is actually very urgent. Would be grateful for any help.
Thanks,
Sayantan

This has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

"Assign Access Control" returns error for essbase apps in shared services

Hello,
I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
OS: Windows Server 2008 Sp2 (32bit)
Default Installation with default ports,
Installation of all components on the same server,
no clustering
EPM System Diagnostic says that everything is OK.
Now I want to assign filter access for an essbase database in the Shared Services.
Starting the menu item "Assign Access Control" in Shared Services returns the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
+....+
Can anybody help ???
best regards,
Nicole

Hello,
here's what I found out so far:
I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
If I start the shared services console via the workspace everything works fine.
Does anybody know what to do so that it also works if I start the shared services console via URL?
best regards,
Nicole

Unable to see assign users or groups option under a groupin Shared services

I have a bizzare issue related to Shared services.
In Application 1 (on PROD env), after I select the group, right-click and go to properties, under "group members" and "user members" tabs, I do not see the options to assign access to any of the existings groups (we have about 50+ groups). I can only view the existing users/groups, even though I have been given admin/proviosioning rights, while the other admin can assign access to the same application.
While for Application 2 (on DEV) I am able to see all these options and I am able to assign users and groups to any of the groups. I do not see them as a browser issue, as I have opened both these links on the same IE window, but on different tabs.
Unfortunately, I can't test App1 on TEST/DEV, as we do not have its copy on here, it is all on PROD and App2 is only on DEV.
Any ideas?
Thanks,
Paul

I would of thought it was provision related, can you try setting up another user as a test with the correct provisioning such as provisioning manager of the different product areas and see if the new user works.
If it does then it points an issue with your account or the way it has been provisioned.
Cheers
John
http://john-goodwin.blogspot.com/

Shared Services Assign Access Control for Essbase

Hi we have a used who has his provisioning in form of filters in essbase group. I tried assigning his filter to thim through Assign Access Control in shared services. I'm able to see the user and also the the filter I created for the user but when I try to assign it to him and save it is really not getting assigned. It still stays the user doesnot have any filters assigned to his account. Am I missing anything.
Thank you.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

Assign Access Control HTTP 404

The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

Problem with shared services,, cannot load "assign access control"

i m using 11.1.1.3 version of EPM.
I have configured Essbase with Shared Services.
When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours..
I re configured essbase ,, but problem remained same...
Could you please suggest what I can do assign filters to users.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Oracle EPM 11.1.1.3 - Assign Access Control in Shared Services for filters

We are using 11.1.3 version of EPM.
We have configured Essbase with Shared Services.
When I try to click Assign Access Control , it gives "loading.." thats it. Nothing else.
I have registered the application from EAS with Shared Services
Could you pelase suggest what I can do assign filters to users.
cheers,

Hi,
Provision the user with which you are logging into shared services as an Esssbase User and try.May this will solve your issue
Thanks.
Edited by: user9976039 on Oct 23, 2009 12:57 PM

Assign access control,http 404 error

Hi,
when i right click on assign access control,i receive the following error:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the server111:19000 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Can you help me in this regard ?
Thanks,
ColDFire

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

The option "Build-in Output" does not appear under my Sound preferences

The sound stopped coming out of my built in speakers. The sound does come through headphonse. The option "Built-in Output" does not appear under my Sound preferences. How can I restore the Built-in Output option under my Sound preferences. Currently the only option that displays is "Digital Out".

Please stop sticking things in your audio ports. you can very easily damage the switch. There is a simple procedure that usually will switch your mac back to internal speakers.
1. open the Audio MID setup app in your utilities folder.
2. Select 'built in output'
3. try the 'source' pull down menu. probably it will read 'digital out' with no other options.
4. control click the 'built in output' option on the left and select 'configure speakers' from the pull down menu.
5. a drop down window will open. Make sure 'Stereo' is selected and click 'done'
6. The Source pulldown menu should now read 'internal speakers'
7. Close the Audio MIDI setup app and get back to work

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

I had a new hard drive replaced in my imac. Now my 1st generation apple TV does not appear under devices in itunes. How do I get my apple tv to connect to my computer? My OS is 10.6.8

Welcome to the Apple Community.
Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can't doing anything abouty this, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Songs not appearing under artists

Hi,
I'm going to try and explain this the best way I can,
On my Ipod (30GB), some songs do not appear under the artist.
Example:
I have two songs by Christina Aguilera, A is from the album "Stripped" and the other one (B) I haven't listed any album name (therefore it is Blank). So on my ipod when I go into:
[ Music -> Artist -> Christina Aguilera -> All ]
only song A is shown.
But if I go into [Music -> Songs ] I can find A and B...
So you see my problem,
If you have any idea, please answer,
Regards,
Waq
Windows XP Pro

"the other one (B) I haven't listed any album name (therefore it is Blank)."
There is the problem.
See: Some songs don't don't show under artist on my iPod.
From what I understand, once you add a second album name for that artist even for a single song, ALL the rest of the songs should now show up under that artist, even those without album names.

Not appearing under devices

When I connect my iPod Classic, it does not appear under devices. I do have it on my iMac desktop, so I think the USB is working properly. The iPod also will connect to my PC with no problem; I synced yesterday evening. I have the latest iTunes on both computers.
Any ideas?

See here: iPod does not appear in iTunes or iPod updater in Mac OS X
And here as well if necessary: iPod not recognized in iTunes and Mac desktop
Did it ever show up previously? If so, what has changed then? Have you recently installed any third party software/plug-ins/etc.?
B-rock

I have problems with the Assign Access Control in HFM

I have problems when I want assign Access Control by Shared Services in application HFM. I login with user admin and send me this message
Processing Error:
Description: Invalid argument.
Code: -2147220951
Trace: Number:-2147220951
Description:
Source:General Security Error
Page:
Actor: General Security Error
Anyone can't help me

I've seen this error when the application isn't registered properly. Try re-registering via Workspace.

"Assign access control" not appearing under Essbase in shared services

Similar Messages

Maybe you are looking for