"Assign Access Control" returns error for essbase apps in shared services

Hello,
I installed and configured Oracle EPM 11.1.2 (Foundation, Essbase, Planning, Reporting&Analysis):
OS: Windows Server 2008 Sp2 (32bit)
Default Installation with default ports,
Installation of all components on the same server,
no clustering
EPM System Diagnostic says that everything is OK.
Now I want to assign filter access for an essbase database in the Shared Services.
Starting the menu item "Assign Access Control" in Shared Services returns the following error:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
+....+
Can anybody help ???
best regards,
Nicole

Hello,
here's what I found out so far:
I get the error if I start the shared services console via the URL "http://servername:port/interop/index.jsp" and then select the "assign access control" for an essbase database.
If I start the shared services console via the workspace everything works fine.
Does anybody know what to do so that it also works if I start the shared services console via URL?
best regards,
Nicole

Similar Messages

"Assign access control" not appearing under Essbase in shared services

Hi Everyone,
Can anyone point out the reason behind this? This is leading to all sorts of problems. Configuration is as follows:
App Server: Foundation, EAS, Planning, Reporting, Web Analysis, Workspace on Tomcat
DB Server: Essbase and SQL Server
Essbase is on Shared Services mode.
This is actually very urgent. Would be grateful for any help.
Thanks,
Sayantan

This has been posted in the essbase forum > "Assign access control" not appearing under Essbase in shared services
Cheers
John
http://john-goodwin.blogspot.com/

Assigned access mode doesnt work for Siena Apps?

Hey guys,
we have written up an App to do an about us type interactive experience and had hoped to deploy it to our foyer with assigned access to stop people closing the app/logging out etc.
Is there no way to do this? Assigned access doesn't let me specify the sienna App.
Cheers,
Jim

Hello,
I am wondering if this issue has been resolved. I had messed around with assigned access and was planning on creating an simple local html site and have assigned access use IE but I did not like all of the ability the user had while in kiosk mode and using
IE. so i researched and found Siena. I have spent some time creating a Siena app to use as an assigned access user in kiosk mode but as described above.. Even though I have installed the published app it is not in the list of apps when I try to associate the
user with the app in assigned access settings.. Seems I have wasted much time trying to get something to work in kisok mode only to still be back at square one.
Does anyone have a solution or another app option to create something to display in kiosk mode where the user has very limited capabilities except for viewing what I want to display to them?,
Paul

Shared Services: "assign access control" causes error...

..."Unable to contact the application. Please contact the server administrator."
I need to add users to predefined essbase filters and because I am using Shared Services I have to do this in Shared Services (Projects) and not directly in Essbase.
The problem is that this behaviour is not a general problem but for a couple of cubes.
Does anybody know this problem?!
Thanks!!!!
André

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Issue externalizing the Essbase security to shared services

Guys,
I am facing an issue while externalizing the security to shared services in Hyperion Essbase 9.3.1. When i tried to externalize the users in Essbase 9.3.1, i am getting the error
"Error: 1051400: Analytic Services has already been migrated to Shared Services Mode". But i dont see any options when i right click on the security tab. i am seeing the same options
as we have before migrating to shared services like Externalize Users. Also when i tried to create a user in Essbase, it is giving the following error msg.
"Error: 1051484 Cannot change CSS Authenticated User to Another Authentication Type After successfully migrating that user to Shared Services". Errors are showing my security is in shared
services mode. How i can test if it is really in shared services security mode.
One other thing is, when we installed Essbase, we used 'admin', 'password' as user credentials. Does these have anything to do, as i saw in one thread that 'admin' is not recommended for Essbase while configuring shared services.
Thanks in advance
PM

Forget this thread. I am able to rectify the issue. We forgot to give access to temp folder of EAS Console.

Shared Services Assign Access Control for Essbase

Hi we have a used who has his provisioning in form of filters in essbase group. I tried assigning his filter to thim through Assign Access Control in shared services. I'm able to see the user and also the the filter I created for the user but when I try to assign it to him and save it is really not getting assigned. It still stays the user doesnot have any filters assigned to his account. Am I missing anything.
Thank you.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Assign access control,http 404 error

Hi,
when i right click on assign access control,i receive the following error:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the server111:19000 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Can you help me in this regard ?
Thanks,
ColDFire

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

Oracle EPM 11.1.1.3 - Assign Access Control in Shared Services for filters

We are using 11.1.3 version of EPM.
We have configured Essbase with Shared Services.
When I try to click Assign Access Control , it gives "loading.." thats it. Nothing else.
I have registered the application from EAS with Shared Services
Could you pelase suggest what I can do assign filters to users.
cheers,

Hi,
Provision the user with which you are logging into shared services as an Esssbase User and try.May this will solve your issue
Thanks.
Edited by: user9976039 on Oct 23, 2009 12:57 PM

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

Problem with shared services,, cannot load "assign access control"

i m using 11.1.1.3 version of EPM.
I have configured Essbase with Shared Services.
When I do right click on application on shared services and select "Assign Access Control" , it gives "loading.." .it remains same for hours..
I re configured essbase ,, but problem remained same...
Could you please suggest what I can do assign filters to users.

Have you given maxl a try:
grant filter appname.dbname.filtername to user;
Cheers
John
http://john-goodwin.blogspot.com/

Assign Access Control HTTP 404

The assign access control throws the http 404 error when i try to provision from shared services. It however works from workspace. Is this a known issue on 11.1.2.2? If there are any ways to make it work, Please post.

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

I have problems with the Assign Access Control in HFM

I have problems when I want assign Access Control by Shared Services in application HFM. I login with user admin and send me this message
Processing Error:
Description: Invalid argument.
Code: -2147220951
Trace: Number:-2147220951
Description:
Source:General Security Error
Page:
Actor: General Security Error
Anyone can't help me

I've seen this error when the application isn't registered properly. Try re-registering via Workspace.

Essbase Registration With Shared Services Fails...

Hi all,
I have three system A, B, C in a distributive manner. A has only Oracle 11g and Essbase Server. B has Shared Services, Planning, Essbase Essbase Components, Workspace. C has EPMA, Calc Manager, Reporting Analysis. I created separate database for each components. While configuring I do the following-
-> First on B I configured Shared Services/Common Settings with its database(1st Time). I could see the green tick.
-> On A I configured Shared Services/Common Settings with previously configured database. I could see green tick.
-> On A configure Essbase Server, here I get the error which shows Register with Shared Services failed.
Examining the configtool_err.log navigate to D:\Hyperion\logs\config folder I see the following message-
(Jun 10, 2009, 01:13:32 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Shared Services Registration task can not be executed because Shared Services instance is not available in Registry
(Jun 10, 2009, 01:13:42 PM), com.hyperion.essbase.config.EssbaseAgentTaskProcessor, ERROR, Error in executing the script to register Essbase as a service: exitCode = 1
I am using v11.1.1.1 on Win 2003.
Can anyone pls help me how to solve this??
Thanks.
Edited by: Sap B on Jun 10, 2009 12:52 AM
Edited by: Sap B on Jun 10, 2009 1:14 AM
Edited by: Sap B on Jun 10, 2009 1:15 AM
Edited by: Sap B on Jun 10, 2009 1:48 AM

Thanks John. I was so anxious to get a response from you. See, on the machine where only Essbase Server is installed( and 11g as well), on configuration page I get two options- Hyperion Foundation and Essbase. Now Hyperion Foundation( Configure Database and Common Settings) configuration is done properly with previously configured database.
Now in Essbase node there is Essbase and under it is Essbase Custom Configuration. when I try to configure it I get the error that Register to Shared Services failed. I could see green tick on Essbase Custom Configuration, but a red cross on Essbase.
What needs to be done John?? Please help.
Edited by: Sap B on Jun 10, 2009 2:06 AM
Edited by: Sap B on Jun 10, 2009 6:22 AM

Hyperion workspace log-in issue for only one (in Shared Services) active di

Hi All,
This is Raj, working as Hyp support analyst.
I have big issue in Hyperion production environment. (version No. 9.3.1)
Issue is, we had issues with TWO active directories of Hyperion Shared Servces which ad1 and ad2. We found that the TWO respective active directories (ad1 and ad2) of their hosts are not working.
After that we changed those two active directories hosts with new host names respectively. We have implemented these changes in DEV first and those TWO active directories user able to access Hyperion workspace (HFM users) which are under ad1 active directory. offcourse we have all the servers as well.
But ad2 users are NOT able log-in to the Production workspace but they are able to log-in with DEV workspace.
Not really sure what happened... (Please note that, No access is changed for any of the users)... if it is LDAP issue...how it to resolve...
Can some one please help oout in this...
Thank you very much in advance.
- Thanks,
Raj.

Hi,
Those error messages usually happen when Shared Services has just started up and before the other services have started, it sends out a ping to see if it gets a response from the other application servers, the pings will fail until the other services have started, once they have started them messages should disappear.
I would check that if any changes have happened to your MSAD or the account that shared services uses.
Cheers
John
http://john-goodwin.blogspot.com/

Unregister Essbase/EAS from Shared services

Hi Is it possible to unregister essbase, EAS from shared services? if so can some one please guide me unregister. we are on EPM 11.1.1.3
Thanks

Hi,
I've a similar issue with my customer.
In fact we have an an application with several databases and end users have read access on one, write acces on another and finally calculation accesses (but only on few calc scripts) on the last database.
SO, in shared security mode we can't reach all these requirements, beacause access are granted at the Essbase application level.
Therefore, the only solution I've found to put Essbase in stand-alone mode is to drop the essbase.sec file and recreate the essbase applications thanks to EAS or maxl commands.
For EAS I've found a topic on this forum, and the solution is to edit the olapadmin.properties file on the installation path of EAS server and to swith the value HUBProvisionEnabled=true at false.
You have to stop and start the services to do that but it works. And when started, you can use the EAS default login.
Edited by: Eric_M on May 2, 2011 6:02 AM

"Assign Access Control" returns error for essbase apps in shared services

Similar Messages

Maybe you are looking for