Assign an employee on the system to ESS user profile

I am trying to assign an employee on the system to ESS user profile and the message I get is personnel number 00000001 does not exist. When this employee has full record on the system and is an active employee What am I doing wrong?

hi ramana,
IT 0185 can be used for India payroll. This is for pan no, gratuity.
This will not affect payroll.
OR
We maintain subtypes in table v_t591a. Goto tcode sm30 --> v_t591a --> select maintain
OR
Check his Infotype 105 and see if there is a valid record for the employee.
Regards,
Sujatha Reddy L.

Similar Messages

Issue with the assignment of Employee to the Territory structure

HI
User is facing an issue in the assignment of Employee to the Territory structure. When the user is trying to assign a Employee say 'x' to a Terr ID, the following error occurs 'Assignment to item failed,chenges have not been saved'. Item referred in the error is the postion. This error also occurs when the user is removing a present BP from a TerrID and adding a new one.
The error has a description saying that the position might be locked but i dont see it being locked
Thanks & Regards
Neeraj

Hi Neeraj,
Could be an authorization issue.
Check the SAP Online help for guidance, maybe you missed something.
The direct link below will take you there.
http://help.sap.com/saphelp_crm50/helpdata/en/9a/7cd5ced51a754b88bbb4a5c664dd15/frameset.htm
Regards,
Gervase

Linking the system status to user status.

Dear all,
In the customising we have the provision of creating user profile. My requirement is if the system status is having a certain value like ESTO - in the equipment master then this should automatically set the defined user staus and prevent user from modifing the record (equipment master) and when the system staus is changed as AVLB, then the user status should also change and permit user to modify the record.
Experts help is expected.
Can anyone suggest any method of adopting the same - is there any settings for this.
Regards,
M.M

I was able to get the statuses in a table , and as theer are more than one entry fo each of teh WBS so I need to concatenate the systme statuses together and user statuses togerher and finally concatenate the user status and system staus togehter in one field .
SO like fo system status I ahve 3 entreis , I need to concatenate them into one . But somehow when I loop and try concatenating them only the last entry is registeredd and similary for the user status too . Is there a= way I can concatenate so all teh three entries show in like a string
Right now the system status are AVEC, CTRD, SYST in my internal table as three values , how do i concatenate them into one string?
Thanks

Output type settings; print pdf from on the printer defined in user profile

Hi
I have a requirement where i should print the pdf form in the printer defined in user profile when i select save in MB1A transaction; I know this can be done by changing the output type cofiguratioin in the NACE transaction
Could any one please let me know step by step process on how to make changes in the nace transaction to print the form in the printer defined in user profile
Right now we are using a custom output type i tried changing the print parameter to 'S' and followed the sap documentation
in the sap help doc at last it says to check the table TNADR for the entries
but when i saw the table TNADR i couldnt find any entries related to ME application
It would be great if any one can explain in details regarding the changes in output type configuration , TNADR table and related stuff
thanks

Hi,
Just maintain the condition records in NACE transaction.
Just follow the steps...
1.Goto NACE transaction
2.Select the application for example for sales order 'V1' and then click on 'Condidtion Record' button
3.Double click on your Zoutput type.
4.U will may get radio button dialogbox/key combination.select anyone and click on ok button
5.U can see a selection screen..Fill all the filed/fileds.
6.Click on F8
7.A tabular control appers..fill it. select the mediem as 1(print output).U can see a 'communication' button over there..click on it.
8.Maintain ur own printer settings and click on SAVE button..
Actuallly Condition records contain the actual data against which the business rules are checked to propose an output. Using condition records, we can define Output types, transmission medium for the document type. So that we need not to give all the output parameters every time the document is to be printed. We use the condition records for automatic printing of Invoices when we save it.
It maintains a key combination to process the output automatically whenever a system finds the entry/entries with that key combination. We maintain the values in the condition records only.
Hope it is useful...
Regards
Kiran

User Profile Service failed the sign-in. User profile cannot be loaded - For any new accounts created

I'm sharing this issue we encountered earlier today so that others might benefit from what we discovered.
We're using Win8.1 Ent and on two of the systems, any accounts created encounter the following message upon attempted login (i.e. login fails):
"User Profile Service failed the sign-in. User profile cannot be loaded"
The event viewer shows this:
Windows cannot copy file
\\?\C:\Users\Default\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm to location
\\?\C:\Users\TEMP\AppData\Local\Microsoft\VSCommon\12.0\SQM\sqmdata-7696-039-00000.sqm. This error may be caused by network problems or insufficient security rights.
DETAIL - Access is denied.
Solution which worked for us
In our instance either setting the appropriate permissions on the affected file, or deleting the file resolved it.

I had a similar problem, and raised a Premier case, which is mentioned here:
http://blogs.msdn.com/b/asiatech/archive/2014/01/30/new-user-gets-event-1509-after-deploying-ie9-10-11-packaged-by-ieak.aspx
It seems this issue with SQM/CEIP creating a poorly ACE'd SQM file has been around for a very long time, with many causes being the installation of Internet Explorer (as was my case, of deploy IE10 to Win7), but other reasons also occur (as in your case
with VS).
It seems to me that this is a defect in the SQM/CEIP component, but the issue does not consistently occur is all scenarios, which appears to be an excuse to leave the defect uncorrected, so we have to implement ugly workarounds.. :(
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

The user profile service service failed the sign-in. User profile cannot be loaded.

Hi,
While i login to windows 8.1 with normal user not able to login. error saying that The user profile service service failed the sign-in. User profile cannot be loaded. I am able to login in Administrator account. Kindly provide me solution for
this.
System - Windows 8.1 Enterprise x64.
Thanks in advance for your support.

Hi,
Thank your for your sharing and update.
If more questions, please feel free to ask in technet forums, and we will be happy to help.
Best regards
Michael Shao
TechNet Community Support

Is PGI date beased on system date or user profile time zone date?

Hi All,
When doing PGI what date system will take as Actual good issue date ? whether the System Date or User local Time zone date which maintained in User profile. If you have any idea on this please share.
Regards,
Lakshmikanth

Hi,
You need to check with the basis team for settings this to your local time.
You can also check the field Personal time zone of the user in t.code SU01. I am not sure this will update the timings in the database when the user performs some action.
Regards

User Profile Service service failed the sign-in. User Profile cannot be loaded

One of my Windows 8 Workstation creating a temp profile everytime we login, we tried to perform the step to fix the issue http://www.eightforums.com/tutorials/38838-user-profile-service-failed-sign-fix-windows-8-a.html.
After perform the steps unable to login and getting an error "User Profile Service service failed the sign-in. User Profile cannot be loaded"
Then we tried to perform the System Restore, but the system is failed to restore to any date. Now we cannot login with any of the Network User, however we are able to login with Local user account.
How to fix this issue ?

Error
1/14/2015 17:02
Win32k
253
None
A pointer device does not have a mandatory co-ordinate property.
Warning
1/14/2015 17:02
Microsoft-Windows-Winlogon
6001
None
The winlogon notification subscriber <Profiles> failed a notification event.
Warning
1/14/2015 17:02
Microsoft-Windows-Winlogon
6001
None
The winlogon notification subscriber <Sens> failed a notification event.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1500
None
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly. DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory
request was completed.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1. This error may be caused by network problems or insufficient
security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE. This error may be caused by network problems or insufficient security
rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2. This error may be caused by network problems or insufficient
security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1511
None
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1515
None
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Warning
1/14/2015 17:00
Microsoft-Windows-Winlogon
6004
None
The winlogon notification subscriber <Profiles> failed a critical notification event.
Level
Date and Time
Source
Event ID
Task Category
Error
1/14/2015 17:02
Win32k
253
None
A pointer device does not have a mandatory co-ordinate property.
Warning
1/14/2015 17:02
Microsoft-Windows-Winlogon
6001
None
The winlogon notification subscriber <Profiles> failed a notification event.
Warning
1/14/2015 17:02
Microsoft-Windows-Winlogon
6001
None
The winlogon notification subscriber <Sens> failed a notification event.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1500
None
Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, and that your network is functioning correctly. DETAIL - Only part of a ReadProcessMemory or WriteProcessMemory
request was completed.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG1. This error may be caused by network problems or insufficient
security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE. This error may be caused by network problems or insufficient security
rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2 to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE.LOG2. This error may be caused by network problems or insufficient
security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TM.blf.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000001.regtrans-ms.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Warning
1/14/2015 17:00
Microsoft-Windows-User Profiles General
1509
None
Windows cannot copy file \\?\C:\Users\Default\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms to location \\?\C:\Users\TEMP\AppData\Local\Temp\tmpD7E0.tmp\SOFTWARE{fabc8f7e-0af1-11e3-93f3-90b11c2ef481}.TMContainer00000000000000000002.regtrans-ms.
This error may be caused by network problems or insufficient security rights. DETAIL - Access is denied.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1511
None
Windows cannot find the local profile and is logging you on with a temporary profile. Changes you make to this profile will be lost when you log off.
Error
1/14/2015 17:00
Microsoft-Windows-User Profiles Service
1515
None
Windows has backed up this user profile. Windows will automatically try to use the backup profile the next time this user logs on.
Warning
1/14/2015 17:00
Microsoft-Windows-Winlogon
6004
None
The winlogon notification subscriber <Profiles> failed a critical notification event.
Error
1/14/2015 17:00
Win32k
253
None
A pointer device does not have a mandatory co-ordinate property.

Windows Server 2012 Login Issue "The User Profile Service service failed the sign-in. User profile cannot be loaded."

Whenever I try to login to our Exchange Server, I receive the following error:
"The User Profile Service service failed the sign-in. User profile cannot be loaded."
The issue affects more than one user.
Relevant Info:
Server Version: 2012 Datacenter
Exchange Version: 2013
The Exchange server is virtualized.
What I've tried:
1) Remote Desktop from a workstation on the network
2) Remote Desktop from Virtual Machine Manager
3) Connect via console from Virtual Machine Manager
4) Accessing the server via Computer Management and adding my user account to Allow Login via Remote Desktop
5) Creating a new user account for myself by copying the account of a user who can get in
6) Rebooting
I'd appreciate any suggestions.

Hi Aaron,
I would suggest you to check the event log .
Maybe this issue due to the permission of profile folder , please refer to the following link :
http://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

The user profile service: Service failed the log on. User profile can not be loaded.

I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
the log on. User profile can not be loaded."
I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
The
"Do not logon users with temporary profiles" Group Policy setting is not configured.
And I have tried force replication too.
I have exhausted all my knowledge.
Please help
Regards
Phil

It might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Windows 8 "The user Profile Service service failed the sign-in. User profile cannot be loaded."

Hello All,
OK here is what i'm trying to figure out. First off i am new to my company and still trying to learn the in and outs but have already been thrown into the lions cage by myself. I inherited a network that is run on Windows Server 2008 R2. The domain consists
of XP,Windows 7 and Windows 8 machines. Here is the issue i am facing.
Every once in a while (usually after a few hours of inactivity) when a user goes to log into the machine they receive an error stating "The user Profile Service service failed the sign-in. User profile cannot be loaded.". However
this only happens to the windows 8 machines and like i mentioned earlier it usually happens after a brief inactivity period. Now restarting the machine always works(100% of the time) but this super annoying. I have also completely restarted the server just
to find out the problem resurfaced later that day.
Any idea on how to fix this issue? Like i mentioned this only happens to the Windows 8 machines. Is there something i should do on my server to prevent this?
Any help would be greatly appreciated!
Thank you

This one might help.
http://support.microsoft.com/kb/947215
Also might ask them over here.
https://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

This User Profile Application's connection is currently not available. The Application pool or user profile service may not have been started

Hi, we had installed SharePoint Service Pack 1 (SP1). And now the user profile service application is not available. Getting this
Error "This User Profile Application’s connection is currently not available. The Application pool or user profile service may not have been started".
How to troubleshoot the issue anh help/thoughts will be appreciated

Not sure, if this will help, but in my case all of my services were up and running (including app pools) and also IISRESET did not help. So at that point, looking at the error message, I assumed that there is something wrong with the app pool (or app pool
credentials) and went to CA --> Application Management --> Manage Service Applications and selected UPSA and under properties just created a new app pool to run under farm account (did not want to take any chances).
As soon as the new app pool was provisioned, the service came back.
Thanks, Ransher Singh, MCP, MCTS | Click Vote As Helpful if you think that post is helpful in responding your question click Mark As Answer, if you think that this is your answer for your question.

How to enter employees in the system?

Hi,
I'm currently tweaking the OCOD system for use by our sales staff. They want to have the possibility to assign employees to certain task and appointments. These employees aren't users of the system. They also don't want them added to "Contacts". Is there any specific function for adding employees of the company without them being users or contacts? or is this just impossible?
KR

OK, this is what I implemented for a client who was already using Accounts and Contacts and still needed a third object for storing people of a different type(different category from contacts)
NOTE: CO1-3 will not have the same relationships with accounts as compared to contacts and accounts
Rename any of the custom objects 1-3 (for 4-15 I am not sure if all functionality would be avaiable) as employees.
Import records just like you would do for other record types.
create the required fields and layouts under activity (for tasks and appointments)
instead of the regular/default OWNER fields use the Employee(read only picklist) field that appear under the activity field setup and you can use that to assign that employee for appointments and tasks which are separate from the users as well as contacts
NOTE: even though owner may be a required field you can rename that as created by and still use employee field to assign people. thought the standard Lists may not work and you will have to create new list based on the employee field to show each employee his/her tasks. I am not sure how the calendar will work since it may still categorize on basis of owner field
It worked out for the client since they did not want the full calendar functionality but only employees to be assigned to certain things
hope that helps and answers you question
Gaurav

Is there a way to reset the parameters of all the system's native users and groups to their default settings?

After the upgrade to 10.8.3 my console is streaming perpetually with hundreds of lines of what appears to be permissions denials.
I've rebuilt permissions from my admin user, root, safeboot, an external virgin os install, and the recovery partition
run disk utility multiple times
safebooted multiple times
rebuilt the directory structure via the latest build of Diskwarrior
removed all peripherals
reset PRAM
reset SMC
ran the Extended Hardware Test
all drivers are up-to-date
Used OnyX to hunt for corrupted preference files
Used Onyx to clean every cache in the system
Cleaned up the fonts via Font Book
Rebuilt Launch Services
Rebuilt dyld's shared cache
Disabled Swap
Disabled Time Machine Local Backups
I'm running a 2011 MBP Quad i7 17" 2.3GHz 750gig internal 7200rpm with 16gig of ram 1600x1200 display
OSX 10.8.3 with dev kit

For what it's worth, this is the exact same set of ACL's that get "fixed" every single time i run the permissions repair:
Started verify/repair permissions on disk1s2 Flux
ACL found but not expected on "private/etc/apache2/users"
Repaired "private/etc/apache2/users"
ACL found but not expected on "private/etc/postfix/aliases"
Repaired "private/etc/postfix/aliases"
ACL found but not expected on "private/etc/postfix/main.cf"
Repaired "private/etc/postfix/main.cf"
ACL found but not expected on "private/etc/postfix/master.cf"
Repaired "private/etc/postfix/master.cf"
ACL found but not expected on "private/etc/profile"
Repaired "private/etc/profile"
ACL found but not expected on "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
Repaired "Library/Preferences/SystemConfiguration/com.apple.Boot.plist"
ACL found but not expected on "Library/Preferences/com.apple.alf.plist"
Repaired "Library/Preferences/com.apple.alf.plist"
ACL found but not expected on "System/Library/LaunchDaemons/org.postfix.master.plist"
Repaired "System/Library/LaunchDaemons/org.postfix.master.plist"
ACL found but not expected on "Users/Shared"
Repaired "Users/Shared"
ACL found but not expected on "private/etc/named.conf"
Repaired "private/etc/named.conf"
ACL found but not expected on "private/var/root/Library"
Repaired "private/var/root/Library"
ACL found but not expected on "private/var/root/Library/Preferences"
Repaired "private/var/root/Library/Preferences"
ACL found but not expected on "System/Library/Keychains/X509Anchors"
Repaired "System/Library/Keychains/X509Anchors"
ACL found but not expected on "private/etc/hostconfig"
Repaired "private/etc/hostconfig"
ACL found but not expected on "private/etc/shells"
Repaired "private/etc/shells"
ACL found but not expected on "private/etc/ssh_config"
Repaired "private/etc/ssh_config"
ACL found but not expected on "private/etc/sshd_config"
Repaired "private/etc/sshd_config"
ACL found but not expected on "private/var/db/launchd.db/com.apple.launchd"
Repaired "private/var/db/launchd.db/com.apple.launchd"
ACL found but not expected on "private/var/yp/binding"
Repaired "private/var/yp/binding"
Finished verify/repair permissions on disk1s2 Flux

# How to get the system AD Domain user login name in portal?

when a system user use AD Domain method login the system.
and then the user open the portal web application page, but not use AD Domain name login in portal page, that time ,I want to catch the user system login name show in portal page?
I hava try the sereval method with Java or Jsp, or User Cookies ActiveX pulg,I get only the name of the portal hostname.
so Anyone will provider me a well method to get the user login name?

Elobrate more on ur problem

Assign an employee on the system to ESS user profile

Similar Messages

Maybe you are looking for