'Assign at least one Web transaction to user'

Dear Experts;
I take this message 'Assign at least one Web transaction to user' in OER system.Does it fall out because of the customizing ıf so; what should I do?
Thanks a lot;

I am not sure if this will work for you, but have you tried out the following step:
You must perform this step to ensure that fields for the web user interface are configured correctly
spro --> Event Messages, Status Queries and Web Interface --> Web Interface --> Configure Fields for User Profiles
and Save
Do not do any additional settings in here however this is needed to ensure that the WCL (Web Communication Layer) parameter dictionary is updated with the parameter fields
Once the above is done:
In the same spro sub menu choose
Assign User Profiles and Web Interface Transactions to users:
Use the input help to assign the transactions and profiles to a user, depending on the process that you want the user to perform.
Eg.
Process: Delivery Tracking
Web Interface transaction: PTA10_DELIV
User Profile: PTA10_DELIV
Order Web : 1,2,3etc
I think this should solve your problem

Similar Messages

  • "Assign at least one Web transaction to user" in OER

    When i call the /SAPTRX/EM_START , i get an error "Assign at least one Web transaction to user"
    what is the problem?I dont know how to assign it
    Thanks

    Once the above is done:
    In the same spro sub menu choose
    Assign User Profiles and  Web Interface Transactions to users:
    Use the input help to assign the transactions and profiles to a user, depending on the process that you want the user to perform.
    Eg.
    Process: Delivery Tracking
    Web Interface transaction: PTA10_DELIV
    User Profile: PTA10_DELIV
    Order Web : 1,2,3etc
    I think this should solve your problem

  • Sun ONE Web Server & Remote User field

    Hi,
    I look for a tip to my Sun ONE Web Server 6.1 SP2 configuration.
    I have:
    - OS: Sun Solaris 8
    - Apache 1.3 (listen port :80)
    - Sun ONE Web Server 6.1 SP2 (listen port :81)
    - Weblogic 8.1 SP4 (listen port :8001)
    The 3 applications are in the same server.
    My first configuration works:
    - Apache works with basic authentification by password file (generate with htpasswd) and communicates with Weblogic
    - Weblogic listens http requests and work with the remote user id (use method HttpServletRequest.getRemoteUser())
    My second configuration doesn't work:
    - Apache works with basic authentification by password file (generate with htpasswd) + reverse proxy mode (use VirtuaHost) and communicates with Sun ONE Web Server
    - Sun ONE Web Server works with no authentification mode and communicates with Weblogic
    - Weblogic listens http requests and works with the remote user id (use method HttpServletRequest.getRemoteUser())
    The HttpServletRequest.getRemoteUser() returns null in my second configuration.
    How I can configure my Sun ONE Web Server to foward the remote user id ?
    Thank you.
    Christophe.

    Can you send your obj.conf?
    I do not have a 6.1 Web Server installed, by guess work try
    NameTrans fn="redirect" from="/index.html" url="/"
    Also remove find-index or any such SAFs if you have in your obj.conf
    PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"Why do you need this?

  • Assign User Profiles and Web Interface Transactions to Users

    Hi EM Gurus,
    Has anyone worked with not standard scenarios in SCEM?
    They are working well but I can't access them on interface web.
    In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
    But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
    Has anyone accessed not standard scenarios on interface web??
    Help, please!
    Thanks a lot.
    Rodrigo Freitas

    Hello Rodrigo,
    if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
    /admin in the URL of the WCL instead /ehsearch.
    Afterwards you should see them also in the drop-down box.
    Best regards,
    Steffen

  • At least one past rebate agreement is assigned to the marketing project

    Hi,
    We are getting the CRM_MKTPL258 message  when we try set user status "Confirmed" to a Trade Promotion that currently has system status " I1004 Released".
    This message appears after upgrade to CRM 7.01 SP09 to SP12.
    I debuged and found that this message is raised by CL_CRM_MKTPL_STATUS_COLL in ACTIVITY_CHECK method.
    You can see our status profile in next image:
    Steps for reproduce error are:
    1. Open a Released Trade Promotion (With user status "COMM").
    2. Change User Status "COMM" to "CCR2" and SAVE.
    3. Click Edit and do some change Example: "Reduce End Date of Trade Promotion".
    4. Change Status "CCR2" to "COMM".
    5. Click in button Save. We get the message "At least one past rebate agreement is assigned to the marketing Project" and the changes are not saved.
    Any idea how I can solve it?
    Should I open an incident in SAP Market Place?
    Regards,

    Hi Giacomo.,
    I didnt find "Fund Usage Finalization" system status.
    In BS33 for "CCNS Reject" Business Transaction We have next setting:
    Btran
    SysSt
    Description
    Set
    Delete
    CCNS
    I1001
    Created
    X
    CCNS
    I1004
    Released
    X
    CCNS
    I1123
    In process
    X
    CCNS
    I1124
    Rejected
    X
    CCNS
    I1327
    In Simulation
    X
    Let me say you, we can set Rejected status using Mass Change in Advanced Search and using "cl_crm_mktpl_appl_base" class in abap code.
    The error is raised by CL_CRM_MKTPL_TPM_STATUS_COLL class in OBJECT_CHECK_REBATE_AND_DATE method.
    Thank you for your help.
    Kind Regards,

  • How to see system status in spro. How to assign business transaction to user status.

    Hi All,
    How to see system status in spro. can we change system status in spro for maintenance order.kindly share.
    Also share how can we assign business transaction to user status for maintenance order

    Peter,
    You cannot see the system-status in SPRO.
    You can view the system-statuses via BS23.
    Be warned - it is NOT advisable to change the system-status setting as you may screw-up your system. Remember that many statuses are used across multiple objects and multiple modules.
    PeteA

  • Enabling end - user access in Sun One Web Server 6.1 SP2

    Hi,
    I am new to Sun One Web Server 6.1 SP2 and I can't figure how to enable the end user access so that the end users can change their password.
    On iPlanet 6.0 SP2, in the Distributed Admin page, I could enable Distrubuted Administration as well as end user access on the webserver. The end users could then change their own password. I can't find a similar feature in Sun One Web server 6.1 SP2.
    Could anyone out there tell me how to get this done?
    Thanks in advance!

    Hi,
    I just found from release notes that End user administration feature (which was under Distributed Administration ) is no longer supported in Sun One Web Server 6.1. [Problem ID 4865295 in release notes]
    Could anyone provide a workaround to get over this and allow the end users to change their passwords?
    Many thanks in advance,
    auporna.

  • Assigning more than one G/L account to transaction key WRX

    Can any one tell me where we can create General Modification keys in  MM-FI integration
    As i need to assign more than one GL account for transaction key WRX (GR-IR)Clearing account.
    There may be one valuation grouping code with different General modifications thereby we can assign more than one G/L account to WRX transaction key.
    Example:
    Valuation grouping code or valuation modification = IN
    General Modifications: I01,I02,I03,I04..
    General Ledger Accounts: 240940000,240940001,240940002,240940003
    IN I01 240940000
    IN I02 240940001
    IN I03 240940002
    IN I04 240940003
    But , I am unable to find, where we can define these general modifications ( I01,I02,I03)....
    If any one knew please let me know...
    Ramesh B

    Hi
    Tcode: obyc, double clickon WRX event key, slect Rules ....you can find General Modification option>
    REgards
    ss
    Assing the points if useful

  • Showing applets depending upon user input in one web page

    hi, I have three applets. I want to create a webpage, put three buttons (or other interactions) on it. If button one is clicked, applet one is shown. If button two is clicked, applet two is shown. I want this to happen in one web page only and one applet at a time depending on user input. Is there a way to do it? Do I need to use javascript? I am new to javascript ,but if you can point me to relevant javascript topics, i am willing to learn it. Thanks.

    There are a couple of ways I can think of off the bat...
    1) Create an IFrame that the Applet will be displayed in. The button you press submits a form whose target is the IFrame and whose action is a page with the correct Applet.
    2) Actually load all 3 Applets on the page and hide them all in a invisible divs. The button calls a javascript function that unhides a specific div (and hides all the others to be sure only one is displayed at a time).
    3) Uber-javascript AJAX like control that when the button is pushed makes a request to a page that returns the applet tag which the javascript control then inserts into the page at the proper location.
    I would toss up between 1 & 2.
    For code, search Google for important key words (like "form target iframe", or "javascript make divs invisible").

  • Error: Select at least one user or group for provisioning

    Hi all,
    In Hypeion shared services, I haved choosen User for provision but it show error "Select at least one user or group for provisioning". I don't know why, plx help me.
    Thanks.

    When you say you have chosen a user, did you highlight the user in the left box then click the arrow to move that user to the right box?
    What step are you at? What system and what version are you on?
    Are you selecting a user to provision roles? Are you selecting users in an application to provision security classes?

  • On my iPad, in iCal, whenever I attempt to go to March 2013 the application closes. I know of at least one other user who has the same problem. Has anyone else had the same experience

    I am using an iPad.
    In iCal, whenever I try to turn to the month of March, the app closes.
    I know of at least one other person who has had the same problem.
    Has anyone had a similar experience and know of any solution?

    Chiave2,
    Why does the month March 2013 not show...: Apple Support Communities, and Why can I NOT select March 2013 Month...: Apple Support Communities may provide you with a solution for your problem.

  • Getting problem to open Web Transaction from Portal

    User is trying to open one link from portal, which is SAP transaction iView.
    This calls one custom transaction from SAP R/3.
    This transaction is Easy Web Transaction and GUI support for it, is SAPGUI FOR HTML.
    Now the problem is, user is not able to open this link from portal. I can open this same link in my login. But this particular user can't.
    Whenever he tries to open this link, gets error message, 'Transaction ZXXXX can not be called in the Easy Access Menu; see long text' and instead of opening the transaction in browser, it opens SAP R/3 GUI.
    I have checked the portal content and found no error.
    Also asked user to login in my system, but got the same error.
    This user is able to access same link from Quality portal, but not from Production portal.,
    eventhough the data in both portals is same.
    What can be the error?
    Please give your expert comments. Thanks in advance.
    - Amrut

    Hello Miikkal,
    You need to enable SharePoint class in IE. Please follow this
    blog and follow this
    article.
    Once, this is done you can Enable all the IE settings to load for Intranet and Trusted zone settings
    Put your site in compatibility mode and trusted zone
    Also, make sure that 2 versions of Office suite is not installed on the system.  Eg. Lync 2013 and Office 2010 on one single machine
    What happen when you by pass your TMG server. To do this we need to make host entry for URL directed to APP server IP Address.
    Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

  • Calling Transaction through User Decision step in workflow

    Hi all,
    Pls help me calling a transaction through User Decision step in workflow. I have attached two buttons to my User decision and the one of the outcomes to a task where I am calling the transaction through a method of BOR. But the problem is I am unable to see the transaction when I press the button on my User Decision at test run.
    Can you ppl let me know how can I achieve this?
    Pls reply ASAP...
    Thanks
    Sangharsh

    Hello Sangharsh ,
    Please Check the paramater of of the method which you define.
    e.g. I define CALL_TCODE_CJ03 method
          which have the parameters FLAG,ProjectDefinition,WBSElement2,User
          with export, import checkbox.            
    Pass the paratmeres in programs
    e.g.
    BEGIN_METHOD CALL_TCODE_CJ03 CHANGING CONTAINER.                      
    DATA:                                                          
          FLAG(1),                                                        
          PROJECTDEFINITION TYPE PROJ-PSPID,                              
          WBSELEMENT2 TYPE PRPS-POSID,                                    
          USER TYPE USR21-BNAME.                                                                               
    SWC_GET_ELEMENT CONTAINER 'FLAG' FLAG.                              
      SWC_GET_ELEMENT CONTAINER 'ProjectDefinition' PROJECTDEFINITION.    
      SWC_GET_ELEMENT CONTAINER 'WBSElement2' WBSELEMENT2.                
      SWC_GET_ELEMENT CONTAINER 'User' USER.                                                                               
    GET PARAMETER ID 'PSP' FIELD PROJECTDEFINITION.                       
      GET PARAMETER ID 'PRO' FIELD WBSELEMENT2.                                                                               
    SET PARAMETER ID 'PSP' FIELD PROJECTDEFINITION.                       
      SET PARAMETER ID 'PRO' FIELD WBSELEMENT2.                             
      CALL TRANSACTION 'CJ03' AND SKIP FIRST SCREEN.                                                                               
    SWC_SET_ELEMENT CONTAINER 'FLAG' FLAG.                              
      SWC_SET_ELEMENT CONTAINER 'ProjectDefinition' PROJECTDEFINITION.    
      SWC_SET_ELEMENT CONTAINER 'WBSElement2' WBSELEMENT2.    SWC_SET_ELEMENT CONTAINER 'User' USER. 
    END_METHOD.
    I hope it will help you.
    ***Assigning points is the way to say thanks in SDN.***
    Minaxi Shah

  • Enter at least one number for the business partner

    Hi Experts,
    SRM 5
    Classic scenario
    R/3 4.6c
    I am trying to execute users_gen transaction for integrating the user with the org. structure. However upon doing so I get an error message "Enter at least one number for the business partner"
    Please provide pointers on the cause for this and how it can be rectified.
    Thanks.
    Regards,
    Amish

    Hi Muthu,
    I am integrating a single user at a time - through users_gen.
    Infact I am getting the same error message while moving the users within the org. structure.
    Steps -
    1. Execute users_gen
    2. Select the user to be integrated
    3. Click execute check mark
    Please provide any pointers.
    Regards,
    Amish

  • Assign programmatically a BPM role to a user

    Hello everybody,
    I want extend the security administration of the workspace.
    I have investigated tha you can manage the users programatically, with a jmx connection.
    But i don't kow how assign progrmatically a BPM role to a user.
    Thanks,
    Regards!

    hi,
    try this one.
    assign this role to the user.(this user will not be abe to access that transaction).
    in s_tcode, we have to define the "from and to" excluding vao1!.
    hope this might help you.

Maybe you are looking for