Assign bidder to product category - what does this do?

Hi,
we are running SRM 7.0205, and using the bidding engine.
in the business partner master data, there is a "bidder data" tab and has an area to add product categories to a bidder.  What does this do?  If I assign product categories to a bidder, does this mean they can only respond to RFx line items with these product categories?
cheers,

Hi Aleem,
This is used when you have a Supplier Self Registration. The prospect select a product category to make easy to buyer looking for a new vendor by product category.
About your question " If I assign product categories to a bidder, does this mean they can only respond to RFx line items with these product categories?" The aswer is NO.
Rgs,
Pedro Marques

Similar Messages

  • I've put in the serial number on the apple website, and it says that the product hasn't been "activated". What does this mean?

    I've put in the serial number on the apple website, and it says that the product hasn't been "activated". What does this mean?
    Does this mean that the warranty still stands as new?

    I had the same problem, though mine was with an iPhone 5.  I phoned the Apple folks and they told me they had the record of my purchase, and indeed my purchase date had been recorded.  It took a couple of weeks, but the data eventually showed up correctly online.

  • I tried to download the latest OSX Mountain Lion and got this notice - "We could not complete your purchase.  The product distribution file could not be verified.  It may be damaged or was not signed. "  What does this mean and why can't I download it?

    I tried to download the latest OSX for my iMac - Mountain Lion.
    This is the message that I received:
    "We could not complete your purchase.  The product distribution file could not be verified.  It may be damaged or was not signed."
    What does this mean?

    The only thing that worked for me was to boot in safe mode.
    Power down.  Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore. 
    No trouble at all once I did this.
    Reminder: create full backup before you upgrade OS
    Hope it helps.

  • What does this mean?  What should I do? The system extension "//System/Library/Extensions/AppleUSBEthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    What does this mean?  What should I do?
    The system extension “//System/Library/Extensions/AppleUSBEthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.

    You don't even have to type more than 8 letters:

  • What does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products.

    what does this mean "We apologize for the inconvenience, but the ability to order books and prints is no longer supported in iPhoto 5. Please upgrade to a newer version of iPhoto to order these products." I want to buy a photo book and that message keeps popping up.

    TD, LN - You guys make great points and I will take you at your word. Normally, I would not hesitate to update. I have a lot at stake here with a large vacation coming up with a great many new pictures anticipated. I don't know enough to understand what is meant by "verifying my library." Please give me some insight there and I will start the upgrade process tonight! Seriously, I have wanted to do this for some time, but have been scared away by reading too many situations on these forums.
    TD - you have a good sense of humor. I know all versions eventually need to be left to die away. Support is not eternal. I am sure I missed the announcement that certain versions of iPhoto would no longer offer the ability to conveniently make cards, calendars, books, etc. Like the original poster, I was surprised to learn my version did not offer that functionality only by requesting it and getting denied. Sort of frosted me at the time, as you can tell by my original reply here.
    If anyone can help me with the "verifying" question, I'll get off of here and let the original poster have his thread back! 

  • What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    I get this message often when updating things. I have told Small Dog Computer where I buy my stuff, and they didn't have an answer. Thanks in advance.
    What does this mean? ... System extension cannot be used ... The system extension "/System/Library/Extensions/IOFireWireWDHID.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

    Interesting ... thank you! Actually I had that external drive, Western Digital, a while back on my second last? or third last? laptop ... the external drive died with a slew of pictures I had carefully uploaded to it  :-(
    I won't worry about it anymore  :-)
    sorry you got only 5 points, can't figure how to give you 10 points.

  • I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

    I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

    I canceled my month to month Extension Builder plan but "Withdrawn: active on September 27, 2014 " under the product, What does this mean? Is it going to be reactivated on September 27, 2014?

  • "This product has been replaced"! what does this mean??!!

    I purchased a used iphone 5s. when I check the serial number it tells that this product has been replaced, what does this mean? am i still able to use it? what should I do??

    It means that the iPhone was returned to Apple because it was defective, and the owner was given or purchased a replacement. That phone can never be used. It was probably stolen in transit to an Apple refurbishing facility.

  • HT4059 Noticed a category on the itunes store which has "Paid" on it.  I didn't pay for those books?  What does this mean?

    Noticed when I went to the iTunes store that there's a place that says "PAID".  I didn't pay for any of those books.  What does this mean?

    I'm not entirely sure where you are looking, but some books you need to pay to be able to download them from the store, but there will also be some (e.g. old classics) which are free to download - your previous ibook purchases/downloaded will show under the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer, and in the Purchased tab in the ibookstore in the iBooks app on your phone

  • HT203200 I am getting error from Itunes store, what does this mean?

    I am getting an error message from the Itunes Store.  The error: Ox80092013, what does this mean?  I cannot access my account.

    This site provides more information.  Best for older machines.  Note, serial number is sent in the clear.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    or
    This site provides more information, but lacks security too.
    "A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
    http://www.appleserialnumberinfo.com/Desktop/index.php
    http://www.chipmunk.nl/klantenservice/applemodel.html
        ( hint by K Shaffer  )

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

  • Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

    Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
    Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

    Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
    The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
    As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

  • I tried to register my stolen iPhone onto My Profile but it says that it's registered under another apple ID (which is not mine) What does this mean? Does it mean the person who stole my phone is using my phone under another Apple ID?!

    Hi everyone,
    My iphone and Ipad got stollen yesterday...
    I registered my Ipad onto "my profile" but when I tried to register my Iphone 4 onto "My Profile" it says that the product has been registered under ANOTHER apple ID. What does this mean?! Does this mean that the thief is using my phone under a new apple ID?!
    I am getitng  abit paranoid because when I tried to download a new app onto my macbook pro, it says that someone had accessed my account from a new computer. I am so scared.. as I know that if they are able to access my apple ID account they can see my billing/card details. I tried to delete my billing address and card details on my apple ID account to prevent this from occuring but I can't. Please help
    Many thanks,
    Kim

    You should change your AppleID password NOW. And if it says it was registered under another AppleID, the thief has probably done it.

  • 'Device sharing same IP address as your computer' - what does this mean?

    I purchased an Airport Express yesterday and was having connection problems after setting it up to only join my existing network (to play wireless audio to speakers in the kitchen) - I seem to have solved the issue by switching off WPS on my base station (provided by my ISP)
    My question is: after making this change to the settings, I got a message saying 'this device' (presumably meaning the Airport Express) was now sharing the same IP address as my MacBook Pro.
    What does this mean, and will there be any detrimental effects?

    Thanks BTF. Presumably only my MacBook Pro and the Apple TV are connected to the internet as the Airport Express is only set up to join the existing network with the crappy router as the base station. Neither the ATV or AE have static IPs assigned.
    I have since restarted my MacBook Pro and at present have Airplay audio streaming to the AE and video to the ATV simultaneously without any (at the moment) problems.

  • HT1452 Repair permissions says Group 0 should be group 80...what does this mean?

    What does this mean...Group 0 should be 80?
    Some say Group 80 should be 0?

    It just means the item is assigned to the wrong owner. 0 is the OS, 80 is the admin user. So the item's permissions were improperly assigned to the OS as the owner rather than the admin account.

Maybe you are looking for