Assign Business System in Integration Directory

Hi all,
i have basic question.
in my ID, there are some configuration scenarios.
for example, the left side look like,
in case,one of Business System created on SLD was assigned to one of configuration scenarios,
i would need to assign same business system into Business System in Service Without Party in another configuration scenarios, it was not possible to assign.
can i assign BS1 to several configuration  scenarios?
or should i create Main scenario in order to define communication channel?
thanks in advance
venjamin

Hi venjamin
Yes, you can assign the same business system to different configuration scenarios.
to do this there are 2 ways.
1. Open the cofiguration scenario to which the business system has already been  assigned.
Right Click on the Business System> Add to Scenario> Select the scenario to which you want to
assign your business system.
2. Select the objects tab>service without party> business system> your business system> right click-->
assign to scenario and then select your scenario.
Hope this helps,
Regards,
bhavesh
Message was edited by: Bhavesh Kantilal

Similar Messages

  • Error while assigning Business Systems in Integration Directory

    Hi,
    I'm getting an error when trying to assign the business systems in the integration directory.
    The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
    I've cleared the SLD_cache and checked it but the same error.
    The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
    what might be the error.

    Hey
    just want to make sure,are u using communication channel with party or without party.
    also make sure that user has sufficient authorizations
    http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
    Thanx
    Ahmad
    Message was edited by:
            Ahmad

  • Importing new business systems into Integration Directory PI 7.1

    Team SDN,
    Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version).  There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
    Please share with members if wht are the new changes in PI 7.1 work proceses  like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
    Thanks SDN.

    Hi Madhu,
    If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
    refer below link..
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Raj

  • Business Service (vs) Business System in Integration Directory.

    Hi to all,
    I want to know the best practice for using Business Service and Business System, Then
    When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
    Thanks,
    Vikram.C.

    Hi Vikram,
    >>Business System: It represent a specific application System in the SLD.
    Business Service: It represents an abstract service and are used in Cross    Company Process.
    >>When we should go for Business Service instead of Business System in Integration directory?
    Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
    regards

  • No business system in integration directory error...urgent pl

    Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
    When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
    What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
    Thanks.

    Hi,
    make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
    If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
    Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
    Did this fix the problem?
    Regards,
    Hans Christian

  • Not able to import business system in Integration Directory

    Dear all,
    Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
    Now in the post instalaltion activites.
    I have changed the exchange profile parameter
    SLD connection.
    And other post installation activites succesfully.
    But I am not able to import the business system in Integration director. It throws an error by mentioning.
    *Access to object list of type business system using the internalEOA service business system accessor failed *
    Here we are maintaing a central SLD and hence i created the service users with specific roles.
    SLDcheck is working fine and it dispalying the businees system as well.
    I confirmed that the user and password are same in XI and SLD system,
    But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
    Is this the problem or am i missing out somewhere?
    FYI: The users are not locked.
    Kindly suggest me and it will be greatful if i get immediate reply.
    Thanks and regards
    Vijay kumar G

    Hi Vijay,
    It looks like the problem is with the SLD.
    Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
    Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
    Regards,
    Lim...

  • Cannot see business system in integration directory.

    Hi all,
    I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
    I have configured the scenario as given in the exercise scenario in the integration repository.
    In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
    p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
    Thanks,
    Joe.

    Looks like the much abused points system is having a bad day on SDN
    I am glad actually - will keep the spammers away
    A Thank You is all that drives and should drive SDN
    Regards
    Bhavesh

  • Problem Assigning Business Systems

    Hi,
      Landscape: New XI 3.0 SR1 Installation, W2K, oracle.
    SLD: on a separate server with ABAP+J2ee. ABAP datastore for UME. Updated with new CIM, CR content.
    Followed oss note: 768148 - Using a separate SLD for XI
    We completed all the settings as per post-installation guide and XI configuration guide. We were able to connect & create the technical and business systems for XI and R.3 ECC 5.0 in the SLD.
    SLDCHECK in XI server is fine, and shows the correct information about the SLD.
    But when I am trying to assign a business system in Integration Directory - Service without third party, in the following wizard I am getting an error message
    "Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed"
    Any help would be appreciated

    Hi Rao,
    The following links u may find it useful.
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    http://www.sap-press.com/downloads/h982_sample_chapter.pdf
    *Please Reward points if u find it useful.
    regards,
    gyanaraj

  • Idoc adapter -  No service for a system in Integration directory

    Hi,
    I'm trying to send a custom IDOC from an R3 system to an XI instance.
    All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
    SM58 in the sender system reports the error:
    "No service for system SAPXXX, client nnn in Integration Directory".
    Do I have to create the service? How?
    Thanks for any suggestion.
    Simona

    Hi Simona,
    you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
    In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
    Regards, Udo

  • How to add buisness system in Integration directory -objects

    Hi All,
    I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
    so in the integration directory,
    objects--->service without party >buisness system>
    in the buisness system , whatever buisness system i created the  is not found.
    how to add buisness system into integration directory -- objects.
    Regards,
    vinoth.

    Hi,
    go to integration directory,
    objects--->service without party >buisness system>
    select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
    If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
      and do the same process again..
    Regards,
    Venu.

  • Assign business system

    I have created a business system in SLD.  When I want to assign this business system to the scenario, I can not find it in the wizard and also not show on Object tab. It is a new business system, I dont assign it to the other scenarios. How to find it?

    Hi
    You need to first import this business system from SLD into Integration Directory.
    Go to objects tab -> right click on "Business System" -> Assign Business System.
    In the new window choose your newly created business system and its ready to use now
    If your Business system does not show in da new window, refresh the cache,
    how to refresh the cache?
    Goto ID -
    > Environment -
    > Clear SLD Cache,  try the step of importing it again.
    Hope this clears your doubts
    Thanks
    Saiyog

  • Unable to assign Business System in Configuration

    Hi,
    I have created a new Technical system in SLD. I have also configured a Business system for it. But when i am trying to assign this system in Configuration, "Assign Business system", i am not able to see the newly created business system.
    Please help me.
    Regards,
    Siva Maranani.

    We  have already  assinged the Integration server to their respective business system groups while creating the Business system groups.
       BSG: XI_DEV --> UKD_400( Integration Server DEV )
      BSG : XI_QA  ---> INTEGRATION_SERVER_UKQ( Integration Server QA)
    As per documentation, the business systems should be automatically assigned to their respective Groups based on their association with Integration Server.
    But, we are not seeing this behaviour, both the Integration servers are being assigned to the same Business System Group.
    Please help me understand if i am something in the configurations.
    Thanks
    Govind

  • Problem in assign business systems in IB configuration

    Hi ,
    I have defined Technical systems,business systems properly in SLD and i also able to import my software components in Integragion Repository. i have defined all the data type , msgs types ,msg interface,msg mappings properly in IR.
    But my problem is when iam trying to assign business systems in IB configuration scenario.
    Business system list is not appearing in IB configuration.
    Thanks
    Hari

    Hi,
    Check the following..
    1) Check Whether that BS is already is Assigned to Another Scenario
    2) If it is Assigned to another scenario means, goto Objects TAB -
    Expand Service With out Party
    Business sysemRight click---Add to scenario( Select ur scenario)
    3) Do SLD Cache through Envoronment----SLD Cache
    once you do this..
    1) Expand Your Config Scenario--Service Without Party-Business SystemRight clickAssign
    2) Say Continue-Say Continue Select ur BS
    3) Un check the Check Box Bottom of the Window
    go throgh these blogs too..
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
    Thanks,
    Vijaya.

  • Automatic comm channel when assigning Business system during configuration

    Hi all,
    In scenario file to file during Configuration,
    During assigning business system there is a check box:
    <b> 'Create communication channels automatically' </b>
    I am planning to use File adapter on both receiver and sender side..
    The question is Do I check this box or not ? If I do check this box it creates for me HTTP adapter ...Do I need it or not? I am clearly only using file adapter
    thanks all !
    Jon

    U cannot use it in ur scenario. This function is supported for the following adapter types:
    - XI Adapter
    - HTTP Adapter
    - IDoc Adapter
    - RFC Adapter
    See this
    http://help.sap.com/saphelp_nw04/helpdata/en/42/d1a4d665c5574fa6e19784358ec948/content.htm
    Regards,
    Prateek

  • NOT able to assign business system in ID

    Dear all ,
      i am not able to see my business system in the list when am trying to assign
      business system.
      i also tried refreshing the SLD cache but not working.
      if u can help.
    Regards,
    Tarang Shah

    Hi Tarang,
    Just check if you have the right permissions to do that.
    It can also happend that the businees system is not added in the SLD or SLD has to be refreshed.
    regards,
    younus

Maybe you are looking for