ASSIGN_CAST_WRONG_LENGTH error encountered at AS02, AS03 screens

Hi All,
I';m facing a wierd problem I get the Runtime error: ASSIGN_CAST_WRONG_LENGTH
This i face at the AS02 & AS03 screens. However, other users on our SAP system dont face this issue when they log on from my system. It occurs with my user ID on other systems as well, inspite of me having the same roles and authorizations as others who can access it.
I will highly appreciate it if someone can help me out.
Thanks,
Tejas

Heres the solution from SAP.
Delete the entries for just the users where:
DDSHPVAL50-USERNAME = 'INDIVIDUAL USER'S NAME'
This clears the F4 help worklist and things work just fine!
Thanks,
Tejas

Similar Messages

  • I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

    Hello,
    I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
    “The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
    Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
    Could anyone please help me on this?
    Salamat,
    Cat

    PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
    If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

  • Error encountered while copying audio stream

    In Captivate 4, I attempt to capture screens. I hear the clicking as it captures, I click END when finished. Program attempts to save and then a dialog box displays with "error encountered while copying audio stream". I am not attempting to record any audio.
    I searched the web and found references to this error back two versions and two years - but no solution.
    Does anyone know of a solution? Thanks.

    Hi there,
    I have experienced this on Windows XP. In my case this was due to a dll (Dynamic Link Library) file not being corectly registered in the Windows XP Registry. If you are using XP then take a look at the following blog post.
    Adobe Captivate 4 Installation Issues on Microsoft Windows XP 
    If this doesn't solve the problem or you are using Windows Vista then please report this issue to the Adobe Captivate team using the web address I have included below.
    Adobe Captivate Feature Request/Bug Report Form 
    Best - Mark
    Visit the macrofireball blog

  • A Critical error encountered while loading webpage.

    Was running 2.1.51  and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
    A Critical error encountered while loading webpage.
    Reboot router - log back in - can go anywhere except the status page -- get same error page
    made the mistake of downloading and upgrading firmware to 2.1.71   = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
    A Critical error encountered while loading webpage.
    the url is https://192.168.75.1/scgi-bin/platform.cgi   but it doesn't load only displays the error.
    could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
    thanks.

    Thanks for the response.   Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box.  Luckily I had a backup of the config so it wasn't too painful to restore.
    I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
    For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired...  I had successfully logged in without issue and was able to view the status tab only a week earlier.
    be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned...

  • Error message clears content of screens

    Created a database trigger and use the
    syntax RAISE_APPLICATION_ERROR (error#,'...')
    When the error is encountered, it clears
    the screen.
    Would like to know if there is a way to prevent the screen from being cleared.
    Michele Ng

    That's an XML validation error for faces-config.xml. What is the content of that file?

  • Error in generating a sel-screen.

    friends,
        am getting an error while activating a report saying that error in generating the sel. screen 1000 in line 0....also, am not able to select the selection-texts (in the goto->text elements), which says there aer serious syntax errors...pl help..thanks all..
    here is my selection-screen declaration code
    SELECTION-SCREEN BEGIN OF BLOCK APPLICATION WITH FRAME TITLE TEXT-002.
    PARAMETERS:
      PM_WERKS LIKE MSEG-WERKS OBLIGATORY DEFAULT '1000',
      PM_MJAHR LIKE MKPF-MJAHR OBLIGATORY DEFAULT SY-DATLO.
    SELECT-OPTIONS:
      PM_MBLNR FOR MSEG-MBLNR NO-EXTENSION MEMORY ID MBN.
    PARAMETERS :
      PM_LGORT LIKE MSEG-LGORT OBLIGATORY DEFAULT '1001',
      PM_BUDAT LIKE MKPF-BUDAT.
    SELECTION-SCREEN END OF BLOCK APPLICATION.

    Hi Satish,
    i am not facing any kind of problem with your code. can you check it once.
    TABLES: mseg.
    SELECTION-SCREEN BEGIN OF BLOCK application WITH FRAME TITLE text-002.
    PARAMETERS:
    pm_werks LIKE mseg-werks OBLIGATORY DEFAULT '1000',
    pm_mjahr LIKE mkpf-mjahr OBLIGATORY DEFAULT sy-datlo.
    SELECT-OPTIONS:
    pm_mblnr FOR mseg-mblnr NO-EXTENSION MEMORY ID mbn.
    PARAMETERS :
    pm_lgort LIKE mseg-lgort OBLIGATORY DEFAULT '1001',
    pm_budat LIKE mkpf-budat.
    SELECTION-SCREEN END OF BLOCK application.
    Regards
    Vijay

  • Signal 4 error encountered while running a customized report

    Signal 4 error encountered while running a customized report
    We are running Oracle Applications version 11.5.10 on Oracle RDBMS 9.2.0. and IBM AIX 5.3 o production system and AIX 5.2 on test machines. We have made a new clone of production database on test machine and after installation of a clone on test-machine all customized reports terminated with signal 4 error.
    Can anybody tell the possible causes of signal 4 errors and their remidies ?

    Thank you for the link, i will read it...
    I have problemss with PDF output...
    When trying to run any concurrent request with PDF output, it completed with error and show the following message in the request log file:
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.AR8MSWIN1256
    Spawned Process 499776
    stat_low =84
    stat_high = 0
    emsg:was terminated by signal 4
    Program was terminated by signal 4
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 20824997

  • Apple Mail The server error encountered was: The connection to the server "

    I have had my apple mail set up for some time now, through Gmail, and it has worked fine. I recently moved into a college dorm and now my apple mail gives me this error message
    There may be a problem with the mail server or network. Check the settings for account "POP Account" or try again.
    The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
    I've tried everything I could think to try, including taking the SSL off, restarting, quitting apple mail, redoing all the settings, and nothing seems to be helping me connect. I did the connectivity test and it says it's connected to the internet, it's just not getting the mail from my Gmail account. Thanks,
    Aaron

    What are the settings for both your Incoming and Outgoing servers, including port number, authentication method, and whether or not SSL is enabled for both?
    Also, it's possible your college is blocking traffiic from Google, so you might try changing the DNS Servers by going to System Preferences > Network > Configure > TCP/IP and enter these two:
    208.67.222.222
    208.67.220.220
    then click Apply Now, quit System Preferences and restart Mail and any other Internet applications you were running. Check to see if Mail still gives you problems.
    Mulder

  • Error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart"

    I paid for & downloaded zagat to go app from handmark & it fails to run on my bb tour. Here is the error message I keep getting on my bb tour - "Unable to load screen :  root. ChangeLocation.ChangeLocationStart".   I've tried everything, including uninstalling and reinstalling the zagat app and I keep getting the very same error message: "Unable to load screen : root. ChangeLocation.ChangeLocationStart".
    btw, I have plenty of free space on my device.  HELP!!!
    I tried Handmark support several times, to no avail.  Thanks very much.  mike

    I'm having the same problem.  Have tried uninstalling, reloading, nothing.  Also read something about do not select Verizon as a carrier, but to use bizB, however on the 7. (new version) I'm trying to install bizB is not an option.  Help please!

  • Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a reso

    Error encountered while signing. Windows cryptographic service provider reported an error. Object not found. Error code:2148073489. Windows 7, Adobe Reader XI, Symantec PKI, Smart Card and CAC. I have seen other threads for this error but none have a resolution. Any help would be appreciated.
    Sorry for the long title, first time poster here.

    This thread is pretty old, are you still having this issue?

  • Error encountered while signing: The Windows Cryptographic Service Provider reported an error: Access was denied because of a security violation. Error Code: 2148532330

    Last night when i tried to sign a document i received the mesage below and after that it says this document can't be signed what can i do to fix this problem.
    Error encountered while signing:
    The Windows Cryptographic Service Provider reported an error:
    Access was denied because of a security violation.
    Error Code: 2148532330

    I assume you are implying "biztax" application here, right?
    I have contacted their program lead, with no result at all.
    Past days I have been searching for a solution - reinstalls / new systems - no solution.
    This issue appeared a week or two ago only.
    I found http://forums.adobe.com/message/5338853 useful - but no positive results either.
    http://test.eid.belgium.be/faq/faq_nl.htm obviously didnt help either.
    If anyone finds a solution to this issue, please do let me know - any help is appreciated.
    Biztax tells to use the "signature", not the "authentication"  - but it is only Auth. that is showing up as option to sign (that works)
    ps, did you fiddle with the Adobe Reader XI security settings and import that PKI etc as well? I hoped that would be the breaktrough. Sadly i'm still crying in my chair.
    Oh, and dont forget: they claim nobody else got this issue. Maybe one or two people. (We got about 8 customers experiencing exactly the same symptoms at the same time )
    >  I noticed that when I try to open the pdf  document that is 'signed' by the government it is not showing the filename in the title bar, but only " - Adobe Reader".    every piece of info helps I guess.
    Obviously last version of Reader   11.0.03

  • Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image w

    I am currently running CS3, windows XP, service pack 2, with recent update, 5.03 installed today.
    I just opened a 500 page document not in sections where 90% of the document is a placed PDF.
    The PDFS were placed using a sample Script that came with Indesign, that instructs the PDF to automatically flow each page after another.
    When scrolling through quickly in the pages pallette, I get the follwing error:-
    "Error encountered while reading TIFF image, Image may be damaged of incompatible. Resave the image with different settings and try again."
    I click OK.
    Then I get the following error.....
    " Could not complete request because of database error. The File "ABC.indd" is damaged (Error Code: 3).
    Click OK....
    Then I get the following error....
    Adobe Indesign is shutting down. A serious error was detected. Please restart Indesign to recover work in any unsaved Indesign documents.
    Then I get the error.......
    Indesign.exe has encountered a problem and needs to close. We are sorry for any inconveneince.
    And I have two buttons to click....
    Debug or Close.....
    If I click Debug, it closes Indesign.
    Within this window there is also a window to gather further information....I click it and it tells me...
    "Indesign.exe....Error Signature AppName: indesign.exe AppVer: 5.0.3.662
    ModName: public.dll ModVer: 5.0.3.662 Offset: 0002e19a"
    To view technical inforamtion about the error report, clikc here....
    "Then it creates an error report and tells me where the report is located along with a scrollable window of 0xc0000005 and heap of zeros."
    The report conatains a whole heap of CHECKSUM ERRORS.
    CAN ANYONE PLEASE HELP??
    I had these errors before updating to 5.03 and the patch hasn't rectified anything!!

    Open the .inx file in CS3 (that's what you have, right?) and save as a new .indd.
    I'd also be tempted to open the tiff in Photoshop and do a save as to re-write it.
    Let us know if it helps.
    Storing files on the network leaves you more open tot he risk of file damage during transfer and save operations.
    Peter

  • "JavaScript Error encountered while loading HTML"

    Hi,
    I have been trying to embed a google map on a InDesign CC page, NO LUCK YET.
    I spoke several Adobe InDesign help line people, unfortunately they couldn't solve it.
    Here is the problem: I tried with different versions
    1- version) I copy of a map code and paste the code on a page, shows grey square round image and nothing (no map)
    2- version) From Object menu:
        "Select insert HTML.."
        "This is an HTML snippet."
    I paste the codes into HTML box, a second later, small box message,
         "JavaScript Error encountered while loading HTML"
    I have 64bit 12gb ram computer with windows 8.1
    InDesign CC version 9.2.1 x64
    Java 7 update 51
    I have tried with Internet explorer, google chrome and fire fox, and different maps, still no luck.
    Can anyone solve this problem?
    Thank you in advance,
    atamtan

    Yes, Google changed something and not for the better.
    Try a bing map instead. They work fine.

  • Displaying error message while entering selection screen fields

    Moderator message: don't offer points
    hi experts...
    i generated a report.
    in that report, the selection screen fields are plant and material type..
    now my rqmt  is like this :
    if user enters any plant except '8210' in  the selection screen, then a pop up should appear like.. enter 8210 plant only, and the cursor should remain in the same screen allowing user to enter correct plant.
    and then same with the case of material type also..user should enter 'mcfe' material type only..
    im using message classes like this:
    if so_bwkey-low ne '8210' or so_bwkey-high ne '8210'.
      message i000(zts).
      endif.
    if so_mtart-low is not initial and so_mtart-high is not initial and so_mtart-low ne 'mcfe'
       or so_mtart-high ne 'mcfe'.
      message i001(zts).
      endif.
    with this logic, when i enter plant..it is prompting
    1) enter plant 8210 only..
    and then when i press enter key it is again prompting
    2)enter material type mcfe only..
    but iam not entering material type here..
    i want to get 2nd error message if and only if i enter material type..
    help me regarding this issue..
    <<text removed>>
    thanks in advance,
    harini.
    Edited by: Matt on Feb 9, 2009 10:14 AM

    Hi,
    Use Error type message in SELECTION SCREEN EVENT.It will place the cursor in the relevant Field.
    At SELECTION-SCREEN ON SO_BWKEY-Low.
    if so_bwkey-low ne '8210' .
    message E000(zts).
    endif.
    At SELECTION-SCREEN ON SO_BWKEY-HIGH.
    if  so_bwkey-high ne '8210'.
    message E000(zts).
    endif.
    At SELECTION-SCREEN ON so_mtart-LOW.
    if so_mtart-low is not initial and  so_mtart-low ne 'mcfe' .
    message E001(zts).
    endif.
    At SELECTION-SCREEN ON so_mtart-HIGH.
    if so_mtart-high is not initial 
    and so_mtart-high ne 'mcfe'.
    message E001(zts).
    endif.
    This will resolve the issue..
    Regards,
    Gurpreet

  • Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

    Hello,
    I would like to have sugestions and help to solve a problem in IS 4.2.
    I've created a view from two tables, joined together with the key from each one.
    Then i've binded the rule with the view (mentioned above) created and calculated score for it.
    The calculation is successful, however when i try to export all failed data i have the following error:
    "Encountered an error while exporting the data. View the lof file (DPR-10126)"
    When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
    However, when i visualize the data from the view created, it is also possible to export to csv file.
    Resuming, the error occurs only when exporting all failed data from the view.
    Can anyone help with this issue?
    Thx
    Best Regards,

    Hello,
    Your information is correct.
    I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
    A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
    Thank you very much for your input.
    Best Regards,

Maybe you are looking for