"Assign Collection Groups to Segment" - Disable Default Group Option.

Hi,
I am using the SAP FSCM Collections Management module. I have a requirement in the following:
"Assign Collection Groups to Segment"
I don't want to have a Default Group in a particular segment. The Default Group is a standard SAP feature.
I would like to disable it, does anyone have any experience with the Field Status Groups in Collection Management, or is there any way this can be disabled.
Do let me know at the earliest.
Thanks & Regards,
Bhairav Naik.

Hi Bhairav,
In our situation, we were unable to systematically determine which group/processor should be assigned for new customers. So, I created a group called "New" and made that the default. The A/R Manager is notified when a new customer is created. It is her responsibility to update the collections profile on the business partner.
Regards,
Beth

Similar Messages

Assigning privileges to default groups

When I'm creating a user (using Workgroup Manager) and am assigning privileges to administer groups, the default group "windows computers" doesn't show up. Actually, only the groups I've created in Workgroup Manager show up. I'd like to assign administrator privileges to these computers to some of my user accounts on the network, but not necesarilly make the user a Domain Administrator.
Does anyone know a way to do this?
Xserve G5 Mac OS X (10.3.9) ldap master no AD, windows servers

Hi,
SAP uses the wage type group concept to group wage types that have similar characteristics with regard to payroll. You must assign all wage types to a wage type group. This is also true for user-defined wage types.
You have to assign wage types to wage type groups so that you can work with the Implementation Guide (IMG). In the Implementation Guide, you only perform wage type maintenance for the wage types required in that particular section of the IMG. You select these wage types according to Wage type group. This means that you can only use the IMG to maintain wage types that have been assigned to a wage type group. In other words, if the wage types have not been assigned to a wage type group, they do not appear in the wage type maintenance in the IMG.
Warm Rgds,
Arun.M

SQL to Find Default HomePage Assigned to Default Group

SELECT
g.name default_group,
UPPER(u.attrval) user_name
FROM ods.ds_attrstore u, portal.wwsec_group g
WHERE portal.wwsec_api.get_defaultgroup(UPPER(u.attrval)) = g.id(+)
AND u.attrname = 'uid'
ORDER BY 1,2
We use the above query to find what default group our users are assigned to. I am looking for a query to run to find the Default Home Page assigned to each of our Default Groups
I currently have to manually open each group through the Portal Group Profile to see the default home page assigned, I was just hoping there was a script that I could create a report from.
Thank you
MJ

Something like this
select application_status,
     sum(case when created_date between sysdate-4 and sysdate then 1 else 0 end) CNT0TO4DAYS,
     sum(case when created_date between sysdate-9 and sysdate-5 then 1 else 0 end) CNT5TO9DAYS,
     sum(case when created_date <= sysdate-10 then 1 else 0 end) CNT10PLUSDAYS
   from app_txn
group by application_status

How to set default group in EXS24 patch?

Hi,
This question is about the EXS24 sampler in MainStage 3. I'm in no way an EXS24 expert, so I'm hoping this is an easy one - I can't find it in the manual anywhere though. I'm working with some EXS24 patches that have been supplied to me for a live project, reproducing the recorded version using those patches. They are set up with keyswitches to select sample groups to allow the use of different articulations. The question I have is how to set the default group - so that every time the patch loads (for example) it selects the legato articulation group, instead of defaulting to staccato as it does at present. I've thought about scripting MainStage to send the keyswitch on load of the patch but that seems like a lot of effort to fix something that surely must be an easy fix I'm missing. From what I can tell, the last group defined is the one that loads automatically - but I can't find any way of changing the order of the groups - I can sort the view, but that makes no difference to the behaviour.

Hello Gaurav,
If I understood correctly, Your requirement is to update People Group segments based on employee category.
Basically you need to update people group values based on employee category before insert into assignment table.
You can acheive this using Dynamic Trigger on Assignment Table.
you need to change the new.people_group_id along with other segment values in this trigger logic.
Following articles will help you steps on how to create dyanamic triggers.
http://oracle.anilpassi.com/dynamic-triggers-in-hrms-payroll-demo.html
http://apps2fusion.com/apps/oracle-hrms/oracle-hr/204-triggers-in-oracle-hrms-and-payroll
Regards,
Saurabh

Disable "Ledger Group" in FBB1

Hi,
I've performed the t code FAGLF101 for Accounts Payable, using the Sort Method "SAP". Using this sort method, the batch input session that is created gets the Ledger Group as "0L", which is the default ledger.
In my case, I won't post anything in this ledger, so I need one way to make the postings left this field as blank. Is there some way to disable this "Ledger Group" field in FBB1, so it won't be required?
Thanks in advance.

Hi,
The reason that the Ledger Group 0L is being used it´s because the Accouting Principle of your Valuation Area.
What you have to do is you need to create a new Ledger Group and assgn it to your valutaion area.
Then you assign this accounting principle to the valution area.
Then assign the accounting principle to no Ledger Group.
Please see the customizing path:
Define new Ledger Group:
Financial Accounting (New)>Financial Accounting Global Settings (New)>Ledgers>Ledger>Define Ledgers for General Ledger Accounting (dont active your new ledger as leading ledger. leave the standard as the leading )
Assign Accounting Principle to none New Gl Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Check Assignment of Accounting Principle to Ledger Group
Assign your Valuation Area to the accounting principel just assigned to none NewGL Group:
Financial Accounting (New)>General Ledger Accounting (New)>Periodic Processing>Valuate>Assign Valuation Areas and Accounting Principles
Now you have more then one Ledger Group in you client (which is not being used for nothing) and you have a valuation area that is linked to a Accounting Principle that is linked to no Ledger Group.
Go ahead now and execute the FAGLF101. You will see that the standard will not try to inform leading ledger in the Group of Ledger.
I found this solutiong debbuging the standard. Took me quite a bit to discover.
Hugs.

Default group(example P+L result) in Financial statement version

Hello everyone.
I have question.
I see in financial statement
version. transaction code OB58.
there are default group such as Asset,
P+L result
how can I configure these group ? what transaction code to
edit group and display ?
please advice.

Hi,
When you create the FSV in transaction code OB58, these nodes get automatically generated and you can not directly configure any items or any accounts against these groups. If you want to use thses groups, you need to first define your items and then reassign these automatically generated items against those configured items which you will create. You can define your item first by clicking on the "Create Item" option. When you create this option place your cursor on the FSV. After that you can reassign the automatically generated items, under your configured items. Next you can assign the GL accounts again those items. Please check the screen shots below where first I have created one item called BS. Then I have reassign the "Asset" which were automatically created under BS. Then I have assign GL account range against "Asset" by taking reference from OBD4.
The item BS is created by selecting the option "Create Items". After that selected the item "Assets" by clicking on the button . Then place the curson on BS and click on the button . The following screen will open.
Group Asset is assigned under BS. Then click on the BS and choose the option Assign Account to assign the GL range.
Finally the GLs are assigned.
Please let me know if you have any questions.
Regards,
Pintu

Where is the default group information stored for a portal user?

Hello -
There is a field in the WWSEC_PERSON$ table called DEFAULT_GROUP, and it is populated with an ID from the WWSEC_GROUP$ table but it seems like there is more to the overall picture here.
If I try to manually update a users group via SQL,
UPDATE WWSEC_PERSON$ SET DEFAULT_GROUP = 318 WHERE USER_NAME = 'XXXXXXX'
Then check the portal profile for the user 'XXXXXXX' I do not see their 'Default Group' as being updated. (However the default group is in effect because these users are sent to the correct group when they log in.
What do I need to modify for the group name to show up for the user on their profile page?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

Default Group Policy - Custom policies don't apply?

We have some computers in TEST OU with password lockout after 4 attempts but it doesn't work. If we disable the Default Group policy in the domain controller then it works.
With the Default Group Policy enable, we run RSOP.exe and it does show the correct policies was applied but why it still doesn't lock the user accounts after 4 attempts? There is no password lockout policy in the Default Group Policy.
Thank you!

> Local Group Policy
This is present because someone opened gpedit.msc on the computer and
configured something in there.
> Not sure why, local policy applied to Windows 7 computer. But for both
> computers, the lockout policy is still not working.
Because Account policies for domain users can only be changed at the
Domain level, not at OU level. Account policies at OU level are only
applied to LOCAL accounts, not to domain accounts.
If you're running 2008 DFL, you can use FGPP and PSO.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to disable a group of services

I want to disable a group of services. For example
online 15:56:55 svc:/network/ipsec/ipsecalgs:default
online 15:56:58 svc:/network/ipsec/policy:default
online 15:57:22 svc:/network/shares/group:default
online 15:57:42 svc:/network/routing-setup:default
online 15:58:44 svc:/network/dns/client:default
online 15:59:16 svc:/network/inetd:default
online 16:00:41 svc:/network/rpc/gss:default
but this doesn't work:
svcadm disable network/*

That is a complicated task. But seems to be the only way. Is this correct?
for i in ipsec/ipsecalgs ipsec/policy shares/group routing-setup dns/client inetd rpc/gss
svcadm disable network/$i

New AP not showing in default group

I got a new 1042 AP and connected it to the network. I have a 2504 contrller with 6 AP's already on it. I thought I could just plu in the new AP and it would show up in the AP group. Instead it shows up as a rouge AP. How do i get the new AP to show up in the default group?
TIA,
Eric

Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x84000800, 0x40000000
RQDC, RFDC : 0x80000036, 0x00000208
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 146 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 5680128
flashfs[0]: Bytes available: 26704896
flashfs[0]: flashfs fsck took 25 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:03:a7:e8:71:f0
Ethernet speed is 100 Mb - FULL duplex
Loading "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-
25d.JA1"...#######################################################################################################
File "flash:/c1140-k9w7-mx.124-25d.JA1/c1140-k9w7-mx.124-25d.JA1" uncompressed and installed, entry point: 0x4000
executing...
enet halted
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 02:58 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P3
Radio0 present 8363 8000 90020000 0 90030000 B
Radio1 present 8363 8000 98020000 0 98030000 0
Ethernet speed is 100 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1042N-A-K9     (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FTX1710K00G
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:03:A7:E8:71:F0
Part Number                          : 73-14034-06
PCA Assembly Number                  : 800-34273-07
PCA Revision Number                  : A0
PCB Serial Number                    : FOC170226AM
Top Assembly Part Number             : 800-34285-05
Top Assembly Serial Number           : FTX1710K00G
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1042N-A-K9
Press RETURN to get started!
*Mar 1 00:00:1
               *Mar 1 00:00:15.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:23.219: AUTOINSTALL: GigabitEthernet0 is assigned 10.13.2.146
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 13 00:54:01.001: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 13 00:54:02.000: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Jan 13 00:54:02.000: %LINEPROTINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 13 00:54:15.656: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.13.2.146, mask 255.255.0.0, hostname ap
*Jan 13 00:55:03.506: %CDP_PD-4-POWER_OK: Full power - NON_CISCO-NO_CDP_RECEIVED inline power source

Project Server default groups when we create new project site

Hi,
When we create new project site in project server 2013 in site settings page some default groups are already present with some default permissions and some default members.
Interesting thing is that the members of these group are same when ever we create a new site.
Can you please help me understand, what these groups are, how they get created and how they are having some default members. Where are these members coming from.
Our project server is having project server permission mode.
Thanks,
Bhawna.

I briefly searched the MSTechNet but was not able to find a succinct article on this point for 2013, if someone has that, can they pls share. However, if you read most of the articles under this area,
you get the idea.
http://technet.microsoft.com/en-us/library/fp161361(v=office.15).aspx
From 2010 this applies and is still "similar"
http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx
In 2013, for every Project Site (connected SharePoint site as it is now called in 2013), 2 Site specific SharePoint security groups are created: "SiteProjectName Project Managers (Project Web App Synchronized)"
& "SiteProjectName Team Members (Project Web App Synchronized)".
And Web Administrators (Project Web App Synchronized) is also created.
In addition, the default SharePoint groups for: Site Members, Site Owners, Site Visitors are present but remain empty.
Project Server controls the creation of these groups and the membership. The membership is a "formula" that goes something like this: If the user is the Project Owner then put them in the PM group.
If the user is a PWA Administrator, then put them in the Administrators group. If the user is a team member on the project, then put them in the Team Members group. There are other factors like RBS that are used in the formula.
Reading the descriptions of the groups reveals that for Project Managers =
Users who have Published this project or who have Save Project Permission in PWA.
For Team Members = Users who have assignments in this project in PWA.
I believe these are the old 2010 descriptions and actually Team Members = anyone who is part of the Build Team even if no assignments.
Further complicating matters is that if you are a site collection admin, you will see all the groups, for PWA and for all the project site (b/c you are actually seeing the site collection groups).
But only the ones mentioned above apply specifically to this project site.
Hope this sheds some light on the topic,
Thanks, Eric S. Pcubed

Wwsec_person$ default group

I am creating new users using ldap via a form. The user gets set up fine and I can see the default group when I log into the administrator. However the wwsec_person$ table is not getting updated with the default group. Can someone please tell me why this would be?

Yannick -
Thank you for the reply. Do you know which table is used in OID? Basically why I need to do this is we hire many new employees every week and create accounts in AD. We sync AD -> OID but the people who create the new users never inform me that they have been created so they never get a default group assigned. This causes them to go to the 'Portal Builder' page when they login to the portal.
To fix this issue Im writing a powershell script to automatically update the default group of all employees that do not have a default group assigned. Do you know if a better method I can accomplish this for bulk OID records automatically? I'm very much open new/better ideas this was the best method I could think of currently.
Thanks again.

Default Group Ownership and Permissions

All new files created by a standard user (User1) have group assigned as "staff" and group permissions set to "Read only." How do I change the default group and ownership permissions for newly created files?
Said another way: I want new files created by User1 to have group = "Accounting Group" and group permisions = "Read & Write".

You can accomplish what you want to do by using ACLs. First go to System Preferences -> Users & Groups, and make a new group called "accountinggroup". Add the users you want to the group.
You will then need to make a folder in which to store all the files to be shared with this group. Put it in some easily accessible place like in /Users/Shared.
Then log in to an admin account and open Terminal. Paste in all of this and the press return:
sudo chmod -R +a "accountinggroup allow delete,chown,list,search,add_file,\
add_subdirectory,delete_child,file_inherit,directory_inherit" \
Then drag the folder into the Terminal window and press return again.
From then on, any file that is newly created in or copied to any location within that folder hierarchy will have read and write privileges for all users in accountinggroup.
You sir are a genius.
I have been trying to utilise a users iMac a "central file storage" for a small business client (all new Lion Machines). I was having so many issues with Lion's POSIXs permissions and also Lion's new versions feature.
Every time users saves files to the shared folder they would inherit permission from the computer that created the file. Thus is another user logged on and opened the file it would be 'Locked' and have to be duplicated or the users would have to manually edit permission using 'Get Info'
I have applied the ACL via terminal and now it works like a dream! All files have that are put into the shared folder have a group with 'custom' permissions and any one can use and modify the files, provided they have log in credentials.
The only trap i would warn people of is do not use typical group names like "Staff", "workgroup" etc. I found that using those was problematic. I opted for employees.
Thanks again Király

Assigning learners to Learner Group and creation of Learner Group.

Hi All,
Are there any standard ways to create Learner Groups from R12.1.3. I have tried looking for Oracle standard APIs but did not find them. Is there any other way we can create Learner group from back end. I know to create them from Application but we have to create bulk number of Learner Groups. So wanted to do them from back end.
Also we may need to assign large number of learners to learner group. Can you please explain the possible ways of doing these assignments.
Any inputs are the most awaited.
Thanks,
Abhishek.

Thanks Anders for your input. Please look into my below query also.
We are in 12.1.3. I tested creating a learner group and adding learners to it (both by organization and learner assignment).
When I try to assign a course to a Learner Group from the Application, I go to course and from "Bulk Enroll" window, I input the Learner Group to which I wanted to add the course and click on 'GO'. Now Application lists out the learners in the Learner Group. Learners in the Learner Group are not enrolled into courses unless I click the check box beside each learner and select 'Add'.
Is this the standard way of enrolling a Learner Group to the course. I am just looking for a way where I can enroll all the learners in Learner Group to a course by selecting that particular Learner Group (rather than clicking the check box beside every learner).
If I have to check against every learner to enroll them in a course, then I dont really get the point in creating Learner Groups. Please advice.
Thanks,
Abhishek

Granting users Site admin to All site collections and/or Adding an o365 group by email to site admin group on all Site collections

We will have 1000s of site collections.
Why doesn't SharePoint Online 2013 offer a way to grant a user or a group Site admin rights to all site collections?
And.. if we must add the user to every single site, can this be done by an o365 or ADFS group using it's email?
We'd like to run this script to add a group to site collection admin on all sites, but Groups can't be referenced by an email?
Get-SPOSite|foreach{Set-SPOUser -Site $_.Url -LoginName [email protected] -IsSiteCollectionAdmin $True}
produces an error. And if we try to add the group by email manually through the UI it can't find it either. We've tried this with o365 groups and ADFS groups.
Any way to reference these groups from PowerShell?
Is this limitation there for a reason?

bump.. anybody?

"Assign Collection Groups to Segment" - Disable Default Group Option.

Similar Messages

Maybe you are looking for