Assign custom infoset to PA30 free search

Hi
Could you please let me know how to assign  the custom infoset to PA30 free search?
Thanks

Check with this program, but I am not sure.
SAPLHRBAS00_GS_DIALOGS

Similar Messages

  • How to add customized fields for free search in PA30

    Hi,guys
       I have created some customized infotype. and I want to add the field of that infotype into free search.
       How do I do that?
       Please help
    Thank you in advance

    Hi Luke,
    I am getting follwoing error in cds file 1906. 05 Oct 2011 09:46:58 ERROR com.nakisa.Logger - com.nakisa.framework.data.commandProcessor.impl.OracleCommandProcessor : getDataTables : Problem executing query. Data Element Name: SAPOrgUnitDataElement.
    This error is only coming in Quality & not in dev. In Dev, It is showing Org Structure for a scenario but in Quality, it is showing a blank screen & giving this error in cds log file.
    I have copied SAPOrgUnitDataElement.xml into SAPOrgUnitDataElement_copy.xml & then used standard SAPOrgUnitCostCenterInheDataElement data element to create a linked data element called SAPOrgUnitDataElement (using SAPOrgUnitDataElement_copy & SAPOrgUnitCostCenterInheDataElement).
    All the fields in SAPOrgUnitCostCenterInheDataElement got added in source Organization Structure feilds & I have also added cost center name field in view but still it is not showing in scenario Org chart in dev. Because of data issues, I thought to test it on Quality but there I am even not able to see Org chart for a scenario & it is giving above said error in cds log file.
    Please help!
    Thanks,
    Prashant

  • Configuration to change infoset behind 'Free search' in PA?

    We are using a custom infoset for our solution.  I am looking for configuration to enter this as the infoset behind 'Free search' tab eg. in PA20.  Looking in IMG, all I can find is a place to turn off free search, and SAP recommends this if you use custom infosets. 
    Can change if infoset be configured? 
    Kirsten

    Hi Kirsten,
    I am not entirely sure about this, but I think its infoset /SAPQUERY/HR_ADM. This is stored in table T77OMAHQ_FUNCARS under scenario EMPLOYEE.
    Regards,
    Priya.

  • Free Search PA20: Using special infoset for specific users

    How can i change the free search type in PA20/PA30 for a specific user?

    You have a possibility to maintain object manager  in PA20/PA30 via SM31:  table T77FOBJMAN
    Choose scenario EMPLOYEE, mark and check the  search tool
    For the Free search is used CL_HR_ST_ADHOC_SELECTION. Not sure how flexible is this class to be set up to call  with your own variant...

  • Object manager free search in PA20

    Hi,
    I am using a custom infotype for object manager free search.
    In the 'HR object selection' screen that comes after clicking on the free search, I am giving pernr and subtype 6 of infotype 6 (Addresses) with 'Value selection' and 'Value output' checked.But in the ouput that comes in the hitlist, the corresponding pernr is showed with the subtype 4 instead of 6 (ie, It is taking the first subtype available for the pernr in the hit list).
    I have checked the custom infoset and it is working properly.
    Is there any setting to done for this issue of object manager?
    Regards,
    Soumya.

    Any solution?

  • Free Search

    Hi,
    I have created an Infoset Query (Query includes Infotypes 1000 and 1001) and assigned it to Free Search in Find by area of T. Code PO13. I have created multiple records in IT 1001 with end date as 12/31/9999. When I select the fields and run the Query in Free Search in Find by area of T. Code PO13  it shows me only 1 active  record for a particular object ID even though  there are multiple active records existing in IT 1001 for that object ID.
    Please advice is it standard phenomena that in Free Search we can see only 1active record per object ID.
    Regards,
    Ghanapriya

    Hi,
    I created the authorization group still the problem exists. Any specific characteristics I need to keep in mind.
    Please Help.
    Regards,
    Ghanapriya.

  • Deactivate free search in CAT2

    Hi,
    In the first screen of CAT2 transaction when you open the matchcode of the personnal number field you can select the tab "Free search".
    I would like to know how to deactivate this Free search tab.
    Thanks in advance
    Aymeric

    Hi Jilly,
    we can hide the field by using table V_T588m. U need to go to sm30, enter the above mentioned table, maintain the module pool mp000200, press enter, select 2000 screen& 29 variable, magnify the row by selecting. Then you will see all the fields. select your birth day field of 'GBDAT' and flag the hide option. Now go to  pa30, check 0002 IT, Date of Birth field will be disappeared.
    Regards
    Swarup

  • Adding Fields to Custom Infotype Using Custom Infoset in SAP QUERY

    Hi All,
    We have a requirement to add fileds to a custom infotype for querying Custom Infoset in SAP Query.
    We are facing problem as the added field is not getting displayed in the Query set so that we can select and display it in the Basic List along with the other filds.
    Kindly suggest a solution.
    Full points will be rewarded.
    Thanks in Advance
    Kumar

    Hi Salman,
    Thank you for your valuable information. I haven't Configured Dynamic Actions yet. Is it simple to write the Logic for Dynamic Actions. Is this the only way to solve this Issue?
    I tried by adding the standard fields, but they are not populating the values; but just appearing as Input Fields with Input help option.
    Please let me know if you have any suggestion in this direction?
    Regards,
    Hems.

  • How to assign  custom rdf report as  stylesheet PO communicator

    R12 :How to assign custom rdf report as stylesheet PO communicator

    Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
    If so, you some choices:
    1) If your lines are always the same height, you might get some ideas on what to do from this article:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
    2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
    3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
    There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height.

  • Assign custom TOC icons

    I am working with RoboHelp 8. In RoboHelp 6, I was able to assign an icon to a book or page in the TOC. I'm trying to do it in RoboHelp 8 (according to the steps below from RH's help), but I don't have the "Image" field (step 2) to select an image.
    I will try and attach a screen capture so you can see what I'm referring to, but last time I tried, the image didn't get through to the forum.
    Thanks,
    Debbie
    Assign custom TOC icons (HTML Help)
    In the Table Of Contents pod, right-click a book or page. Select Properties.
    Click the Advanced tab.
    Under Image, Auto indicates that the book or page uses the standard icon.
    From the pop-up menu, select an icon.
    You can assign other icons to books and pages after you add the bitmap file (BMP) to your project.
    (Optional) Select Mark As New to display the standard icon with a red star. The star indicates to users that the TOC item contains new information.
    Click OK.
    Version-control projects may have more options.
    Note: The Table Of Contents pod displays all books and pages with the standard icons regardless of the selection you make at the Advanced tab. After you generate the project, you can view icons in the Contents pane.

    That help topic relates to HTML Help (.CHM file) output only. Assuming you are outputting CHM files, what you need to do is set your default single source layout to Microsift HTML Help in your Single Source Layouts pod.
    Read the RoboColum(n) for a tips,  tricks and musings on the Technical Communication Suite products.

  • Assign custom tag output to variable. Is it possible?

    I form the code of page like this:
    <body onLoad="... #myArray[XXX]# ...">
    <cfoutput>#printTable(...)#</cfoutput>
    </body>
    function printTable is something like iterate process of
    creating tree-menu structure:
    <cffunction name="printTable" ...>
    <cfloop....>
    ArrayAppend(myArray, ....)
    <cfoutput><CF_treeItem....></cfoutput>
    printTable(....)
    </cfloop>
    </cffunction>
    SO - the problem is that I need myArray elements, but they're
    created inside printTable function.
    I could save everything into the variable and output later,
    like <cfset printTableVar = printTable(....)>, but I use
    custom tags
    What should I do not to change the things too much?
    It would be good if I could assign custom tag result to
    variable:
    <cfset blablabla = "<....>" &
    <CF_treeitem...> ....
    Ok, i will do it via external variable
    (Caller.blablabla)

    Obviously the correct solution is to re-write it properly,
    but for your question of putting the CT results into a variable,
    you just need to use
    cfsavecontent.

  • There isn't Org. Search in free search of  PERNR on PNP Screen with report

    Hi experts,
    I create a standard PNP screen with HR report, but i find there isn't org. structure search in free search for PERNR .
    Should I do configure anywhere to use the org. struture search of PERNR ?
    Thanks a lots.
    Yoga.

    Hi,
    do you use a reportclass e.g. X__X2201 ?
    Regards
    Bernd

  • How to Custom Infotype in PA30 ( in Employee Information tab)

    Can any one  tell me ..
    how to add my custom infotype in PA30 (Employee Information tab)
    I don't how to add....
    Tell me the procedure (Steps) to add in V_T588B.
    Regards
    Surendar T

    Hi Surendar,
    Go to SPRO : Personnel Management - Customizing Procedures - Infotype Menus - Infotype Menu - Double click INFOTYPE Menu.
    There from the Menu F4 help select "Employee Info" and click Continue.
    First note the last number for your user group.
    Click "New entries".
    Write user group - last number+1, infotype number (9XXX) and save.
    Good luck,
    Dilek

  • "Structure search" and "free search" in input help

    I need to have an input help for my PERNR field, right now i am using search help PREMN and calling FM F4IF_FIELD_VALUE_REQUEST inorder to display the input help. But, in addition to this, i wnat the tabs "Structure search " , "Free search" to be displayed in teh input help pop up screen.
    How can i achieve this?
    Thanks,
    Vasuki

    Hi Vasuki,
    Just write it this way
    parameters:p_pernr type pa0001-pernr matchcode object PREM.
    Now once you hit f4 help. The search help will be displayed with all tabs, once you choose the free search tab the respective screen will be displayed.Now if you want to return to other tabs you must choose the button in bottom of the free search screen which is in between "Green tick mark" and "Close button".

  • Assinging a custom infoset to a custom query

    I have copied a production sapquery to a custom query to make modifications. i have also created a custom infoset. when I look at my custom query inSQ01, it displays the production infoset. I cannot find where or how to change my custom query to point to my custom infoset? If someone could please let me know if I missed a step in the creation of either the infoset or the sapquery which is causing this.
    thanks in advance for your help

    I think you have to recreate the query from scratch in order to tied the new infoset.
    Regards,
    Rich Heilman

Maybe you are looking for