Assign Driver Vehicle in DSD Connector Cockpit Question?

Hi All,
We are implementing DSD with MDSD functionality on it. We had created Driver master data (As Customer Masterdata) and Vehicle master data ( as Equipment master) in the DSD backend. We are done with all the DSD backend , DSD connector & MI server configurations. When we go to DSD connector cockpit transation /DSD/ME_CPT we are able to see our Mobile device when we do F4 on the Mobile ID column but when we do a F4 on Driver and Vehicle columns we are not able to see the Driver and Vehicle master data that we had created for DSD project.
Is there any configuration we need to do so that the Driver and Vehicle master data will show up in the DSD connector cockpit transaction????
Thanks for your help in advance.
Thanks,
Greetson

Hi All,
During my investigation I found that DSD Connector Cockpit is reading the data for Driver and vehicle from the table "/DSD/RP_DRVTPLST and /DSD/_RP_DRVLIC.
I am not sure How we can maintain entries in these tables. Looks like there are no tabele maintenance for these tables.??
Thanks,
Greetson

Similar Messages

Question on DSD Connector: Data Readiness

Hi All,
According to the DSD concept during the creation of the Shipment , two outbound IDOC will be created by the output control configuration and a entry will get inserted in the table /DSD/ME_DDR_STAT when processing the inbound IDOC .
We had created a shipment and an IDOC is genereated for DSD connector . A entry is inserted in the table /DSD/ME_DDR_STAT . But the inserted entry doesnot has any value(blank) for the "DSD Connector: Mobile Engine User ID - MEUSER " field and "DSD Connector: Mobile Engine Mobile ID - MEMBLID". So the "DSD Connector: Transactional Data Status- DATA_STATUS" field is on the staus "A-Not Assigned" and TRANDAT_STATUS has value "S- Successfully Processed Data Ready" and PRCDAT_STATUS has value "N-Data not Ready".
These field supposed to have value "Data Ready" status for all fields so that this data will get downloaded to the Mobile client on next synchronization.
We had already assigned the mobile user id with the mobile device id in DSD connector cockpit in reference to the Driver and Vehicle masterdata.
What might be the problem?
Thanks for your help in advance.
Thanks,
Greetson

Hi all,
This is Arun, one of the teammate working with Greetson. To put more light to the same issue,
In the DSD connector as per procedure we are supposed to put 'RFC destination for DSD connector', but this makes the DSD connector cockpit unable to retrive mobile device ID.
IT works instead if we give a 'RFC destination for ME server' . So we changed to that destination
NOTE: to maintain the destination
PATH: Logistics Execution → Direct Store
Delivery Backend → Handheld Connectivity → DSD Connector Settings → Logical
System Connectivity → Maintain destination for mobile engine servers.
Any ideas, appreciated

DSD connector (IDOC : /DSD/HH_CONTROL)

Hi gurus,
I need to create the BAPI /DSD/ME_MS_DOWNLOAD and /DSD/ME_MS_UPLOAD because i want to connect the DSD Connector (BAPI Download and BAPI Upload to Hand Held No SAP)
I have a problem when i want post the idoc /DSD/HH_CONTRL in the inbound process of DSD Connector to DSD Backend, first of all i send the follow IDOCs:
Send DSD-Specific Material Data
Send DSD-Specific Customer Data
Send Driver Data
Send Driver Text Settings
Send Vehicle Data
Send Credit Data (Exposure & KNKK)
The system post in the outbound process have data passed to port OK.
/DSD/HH_CONTROL
/DSD/HH_CUSTMASTEXT
/DSD/HH_DRIVERMAST
/DSD/HH_MATMASTEXT
/DSD/HH_ROUTE_ITINERARY
/DSD/HH_TXTDRV
/DSD/HH_VEHICMAST
DESADV
ORDRSP
SHPMNT
and, when the same idocs wants to send of DSD Connector to DSD Backend has correctly the follow IDOCS with the message: Application document posted
/DSD/HH_CUSTMASTEXT
/DSD/HH_DRIVERMAST
/DSD/HH_MATMASTEXT
/DSD/HH_ROUTE_ITINERARY
/DSD/HH_TXTDRV
/DSD/HH_VEHICMAST
DESADV
ORDRSP
SHPMNT
But, the IDOC /DSD/HH_CONTROL dont posted and the system show the message:
Error occurred when reading DSD files from the source system. See Log
Message no. /DSD/ME018
I have ok the program RBDMIDOC that is executed in the backround process, (specific time).
Any help i really apresure, because is a big issue for me in this step of the project.
King Regards,
Enrique Lydna

Enrique, if your issue is still not resolved, try checking the IDoc ports that you have defined in WE21. Check the IDoc files generated in the app. server directory and compare that with the Inbound file search string (if any).
Regards
DB

DSD Connector & Pricing Data Extractor

IDocs are being sent correctly to the DSD connector. What triggers the pricing data extractor to fetch the pricing data for the shipment? Are entries in the DSD cockpit required? We are running ECC 6.0 with EnhP3.0.
Thanks.

Enrique, if your issue is still not resolved, try checking the IDoc ports that you have defined in WE21. Check the IDoc files generated in the app. server directory and compare that with the Inbound file search string (if any).
Regards
DB

Customer master data not replicated to DSD Connector tables - BD12 - Idocs

Hi experts,
I have a customer existing in 2 different sales organizations. I need to replicate it to the DSD/ME_CUST_SA table in the DSD Connector.
The Idoc's segments generated while executing BD12 transaction, include only information for one sales org (VKORG) but I see no records or segments regarding the other Sales Org.
I think mapping rules are just fine (VKORG field is correctly mapped to DSD/ME_CUST_SA table)
What I need is to have both data replicated: that is, data from both sales orgs.
Any thoughts on this?
Thanks in advance
Edited by: Jose Barreto on Jun 4, 2008 11:13 PM

Hi Jose,
pl. go through note 1015076 and implement it if useful.
please email your personal ID at my id( given in my profile)
as I am also trying to implement DSD and need some help.
Note: reward Points if helpful
Thanks,
Akhil

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

MDSD 4.0 integration between MI and DSD Connector

Hi,
We are currently attempting an installation of mDSD 4.0 - we have the backend configured - and the idocs appearing out in our DSD Connector Admin Console - the appear out in status - R - then we run the download to convert to status P - notified to device - however we cannot pick them up on the mobile devices - there is no queue generated for our device - though this device is linked to the correct user etc. On the configuration guide - there is a reference to setting up polling but this reference is not expanded on - supposed to be page 50 - i am wondering is this a left over from an older version of the document or missing info. And if anyone could expand on how i get the info from the dsd connector to the mobile device.
any help would be greatly appreciated - we have gone through all the guides and come up with nothing.
thanks
Sinead

Hi Sinead,
I think that you should try applying the SAP Note 1508174. Hehe...
All the best,
Andreu

Pool Asset Management - Assign Driver from Planning Board to equipment demand

How to assign a driver in sap pool asset management, using Planning board , since opening the demand through graphical board i need to assign an equipment & drive to the demand created

hi , you can use partner function to assign driver name.

IPod assigned drive letter drops when iTunes launches (windows xp)

My iPod looses its assigned drive letter in windows when iTunes launches. Up until the last Apple iPod software update, it worked fine. I unstalled iTunes and attached my iPod, it stay's connected (it doesn't loose it's drive letter).
I reinstalled iTunes, and the minute it launched, the iPod drive letter goes away. iTunes can't fined the iPod with out the assigned drive letter. Any help in fixing this problem would be GREAT. thank you Dragon47

How would I manually assign a drive letter (Windows XP) to my ipod?
If I uninstall iTunes, the drive letter windows assigns to the iPod stays. The ipod dowsn't loose it's drive letter. If I install iTunes, the minute it starts up, the assigned windows drive letter goes away, and itunes can't find the ipod.
Up until the last Apple iPod download software update, it worked fine
Thank you for your help

Can I use second internal hard drive for boot camp? OptiBay question.

I have a MBP. I have replaced the original HDD with a 160 Gb unit. I have replaced the optical drive with a 500 Gb unit via OptiBay. Right now, the 500 Gb drive is my startup volume, and has OS 10.5.6 living on it.
What I want to do is use 32 Gb of the original drive for a Windows (either XP or 7) volume and the rest of it as HFS+ for storage of stuff (videos, photos, and stuff like that)
I have rEFIt installed on the startup volume. I have played with triple boot setups, etc., in the past.
So how do I install Windows? I will have to use an external DVD drive, of course, and I have a 32 Gb partition that is FAT32 now. Can I insert the Win DVD and let it try to find the right partition? How about drivers? This does get a little bit more interesting.
I am not going to use Windows for production, etc., but would like to be able to play with it.
Sorry if I am bring up a previously answered question, but the OptiBay deal didn't show up in my searches.
Thanks
Roger

Yes, lots of Mac Pro users do that.
It's still a good idea to make secondary backups, especially to a portable external HD, that you can take off-site, so you're protected against fire, flood, theft, direct lightning strike on your power lines, etc.
[CarbonCopyCloner|http://www.bombich.com> is donationware; [SuperDuper|http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html] has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling.
And/or, see Kappy's post on [Basic Backup|http://discussions.apple.com/thread.jspa?messageID=12366915#12366915].

IMac (24-inch, Early 2009) Hard Drive Replacement: Hybrid and Maximum Size Question

I have a 24-inch iMac, early 2009 model and the internal hard drive has died so am looking to replace it and also upgrade it in the process.
At the moment the broken internal drive was the standard 1TB model that comes with the computer. I have been doing a little bit of research and I'm liking the sound of a hybrid drive as they seem to be a relatively economical was of achieving close to SSD speeds. I've been looking particularly at 'Seagate ST4000DX001 DESKTOP SSHD 4TB SATA 6GB/s NCQ NAND 8GB 64MB HYBRID' for the replacement. I guess my question is if this drive will work in the iMac. Does a hybrid drive present and problems? Also, is there a limit to the maximum size the replacement drive can be? Will 4TB exceed this limit? Lastly, I understand this drive uses SATA III to connect with the computer, which is backwards compatible (I think?) so I'm presuming this will work in my iMac?
Thanks in advance.

The hybrid drive will kinda sorta be as fast as an SSD. The newest Seagate Hybrid is quite intelligent about caching the most often used files in flash and is quite an improvement over the first iteration. I used both the first and second generation drives in my 2007 iMac and was quite impressed with their performance…until I installed an SSD. The problem with the hybrids is that they just don’t have enough flash and no matter how intelligent the drive is it is guesswork so sometimes you’ll find the drive access just as pokey as any other 5400 RPM drive and then other times very fast.
For about $200 it is a decent upgrade but with SSD prices having dropped nearly 50% in the last 18 months it is worth considering a smallish internal SSD for the OS and applications and an external drive for data.

BI Administration Cockpit Question

Hi, Does anyone have any exposure to this yet? I have a few questions that I need answers to and I'm hoping the BI Administration Cockpit might be the answer instead of building from scratch.
1. Reports statistics of each process chain and related process chain process
   - I need to know that my ODS activation started @ 10am actived 10,000 records and ended at 10:01 am. (how long it took).
   - I need to know that my data load loaded 1,000 records and how long it took.
   - I need to know that my rollup compressed x number of records and took how long.. Etc, Etc, Etc.
2. Need to compare the above statistics from a day to day perspective so that I can set up exceptions to be reported on.
If the BI Administration Cockpit can't provide me with this I'll have to write some abap process to go out and collect all of this and I'm sure that'll be quite a task.
Anyone have any suggestions how to collect this information so I can report on it?
Thanks,
Ken Murray

Hello Kenneth,
BI admin cockpit has some trending reports. You might need to tweak the iViews / queries a bit but the real time stuff is quite neat.
If you ever end up writing the ABAP to do what you want, take a look in this month's issue of BWExpert first.
Hope this helps,
D.

W530 drive bay design flaw - drive slide out of connectors?

Hi, I recently purchased a W530 with a hard drive bay and I've been experiencing trouble with the bay.
The problem is that there is no mechanism in the drive bay to keep the drive "in bay" - i.e. connected. Because of a small gap between the drive and the wall of the bay the drive will slide out of the connector when the laptop is put in the bag vertically.
this seems to me like a major design flaw in the drive bay, and I'm wondering if others are experiencing the same issue and know about any workarounds.

Kaso wrote:
> Assuming that you are using the UltraBay 12.7mm Lenovo adapter, you must use both the drive tray AND the rubber rails to secure the HDD within the unit.
First, you buy the right 12.7mm-high UltraBay HDD caddy adapter that is compatible with the W530. Second, you put the HDD in the hollow space of the caddy adapter and secure the HDD with the four tiny screws that are provided as part of the caddy adapter. Finally, you plug the whole thing (caddy **bleep** drive) into the UltraBay until the secure latch "clicks" and the caddy bezel flushes evenly with the right side of the chassis.
There are no "rubber rails" involved.
There are NO screws supplied with the Lenovo 12.7mm UltraBay caddy. The caddy presumes that you are using a Lenovo supplied HDD with the drive tray and the rubber rails Look at the diagrams on the flexible cover on the caddy. The Newmodeus caddy uses screws only (supplied) and does not need the rubber rails nor the drive tray.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

New-Partition assignes driver letter to mount point after reboot.

Trying to create a series of mount points using powershell on Server 2012 R2. When I have used diskpart in the past I could initialize the disk, create a partition, format a volume and assign a mount point without assigning a driver letter to the drive.
When I try to do the same thing in Powershell on Server 2012 R2, everything looks great until I reboot. Every partition I created and assigned as a mount mount gets a driver letter added to it... I am using mount points to avoid drive letters. Is there a way
to prevent this behavior. The following is an example:
Get-Disk 3 | Initialize-Disk -PartitionStyle GPT
Get-Disk 3 | new-Partition -UseMaximumSize -AssignDriveLetter:$False | Format-volume -confirm:$False
Add-Partitionaccesspath -DiskNumber 3 -Partition 2 -AccessPath c:\someFolder
Everything looks good at this point with no driver letter assigned. Rebooting adds a driver letter to the volume with no impact on the mount point... Is there a way to suppress the driver letter assignment?

Figured it out... It appears that this part works fine:
Get-Disk 3 | Initialize-Disk -PartitionStyle GPT
$Part = Get-Disk 3 | new-Partition -UseMaximumSize -AssignDriveLetter:$False
$Part | set-partition -NoDefaultDriveLetter:$True
$Part | Format-volume -confirm:$False
If you look at the output of Get-Partition the NoDefaultDriveLetter value is TRUE. After running Add-PartitionAccessPath it changes to FALSE. You can set it back with the Set-Partition command:
Get-Partition -DiskNumber 3 -Partition 2 | add-PartitionAccessPath c:\SomePath -passthru | set-Partition -NoDefaultDriveLetter:$True
I had a bunch of them to do so I used the following:
Function Config-Disk {
[cmdletbinding()]
Param(
[INT]$Disk,
[INT]$Partition = 2,
[String]$Label,
[String]$MountPoint
Get-Disk $Disk | Initialize-Disk -Partitionstyle GPT
Get-Disk $Disk | New-Partition -UseMaximumSize |
Format-Volume -FileSystem NTFS -NewFileSystemLabel $Label -Confirm:$False
Add-PartitionAccessPath -DiskNumber $Disk -PartitionNumber $Partition -AccessPath $MountPoint -Passthru |
set-Partition -NoDefaultDriveLetter:$True
MD "c:\SomeLocation1"
MD "c:\SomeLocation2"
Config-Disk -Disk 3 -Label "SomeLabel1" -MountPoint "c:\SomeLocation1"
Config-Disk -Disk 4 -Label "SomeLabel2" -MountPoint "c:\SomeLocation2"

ImageMate All-in-One with Windows 8.1 - cannot assign drive letter

Hello, I have SanDisk ImageMate All-in-One which worked perfectly well with Windows 7. I recently installed Windows 8.1. The external reader is OK with SD cards, but could not recognize my CF card. The card is SanDisk Extreme 32GB (120 MB/s) After reading in multiple forums, I found this page: http://kb.sandisk.com/app/answers/detail/a_id/12483/kw/imagemate+firmware After successfully applying this updated firmware, not I see the card, but only in the Windows Disk Manager. I cannot access it in the Windows Explorer because the drive has no letter. But when I right-click on the drive and try to assign a letter, I get: "The system cannot find the file specified." Please help!

I am just the opposite.I can not read SD cards.Windows keeps popping up forme to format this drive.Tech support told me thisNote: If you are using Windows 7 or above, please make sure your card is in the reader while it is connected to the computer.The system now recognizes the image mate but still I can not read SD cards.All others are fine!Just wondering what you would do if youdid not have all of the cards supported?Luckily I did.

Assign Driver Vehicle in DSD Connector Cockpit Question?

Similar Messages

Maybe you are looking for