Assign equalizer to multiple tracks

Is there a way to apply the equalizer's setting to a group of tracks? I'm importing my CD collection and I can't figure out how to set equalizer settings except song-by-song.
I've tried selecting the group of songs and changing one of the song's settings, but it only applies to that song.
Thanks for any help.

Select the tracks you want to change and Get Info (command-I).
In the 'Multiple Song Information' window, you can set it at 'Equalizer Preset' (bottom right).
Hope this helps.
M

Similar Messages

Selecting multiple tracks to assign compilation tag

Hello,
If I right click on a single track and select "get info" I can check the "part of compilation" check box. However, if I select multiple songs from a compilation album, the check box is no longer present under the info tab. Is this a bug with the latest version of iTunes? Or has the ability to simultaneously assign multiple songs as part of a compilation been removed?
Thanks,

Problem solved. The check box is moved to a different tab (options) if multiple tracks are selected. Gotta love how intuitive apple products are . . .

Artwork tab missing when selecting multiple tracks

osx 10.5.8
itunes 9.0.3
i'm having trouble assigning MULTIPLE pieces of album art to MULTIPLE tracks SIMULTANEOUSLY.
i see that i can add multiple arts to a single track by:
.. selecting a single track by highlighting -> get info -> artwork tab
.. selecting and playing a single track (so that the speaker icon appears to the left of the track in the playlist; paused or not) -> dragging artwork into the artwork pane in itunes; artwork gets added only to the track with the speaker icon regardless of which track(s) are highlighted. if there is existing artwork, new art gets added (does not replace old art).
also, adding a single piece of art to multiple tracks can be done by:
.. selecting tracks by highlighting -> get info -> info tab -> artwork field (note: artwork FIELD within info TAB of 'get info' dialog, not artwork tab)
adding multiple arts to multiple tracks simultaneously COULD NOT be done by:
.. selecting (highlighting) multiple tracks -> get info; ARTWORK TAB IS MISSING WHEN MULTIPLE TRACKS ARE SELECTED! there is only the artwork field in the info tab. setting this field with art resets any previous art -- the only art for the selected tracks will be the single piece you set in this field.
.. selecting (highlighting) multiple tracks -> dragging artwork into the artwork pane in itunes; artwork gets added only to the (single) track with the speaker icon (playing/paused) regardless of which track(s) are highlighted.
i've seen it done in (unknown version) windows itunes by:
.. selecting (highlighting) multiple tracks -> get info -> artwork tab (NOT MISSING!?)
pretty aggravating heh
help please.

haaaa
i just figured it out.
just above the artwork box in the lower left of the window, there is bar.
you can click on it to toggle between Now Playing and Selected Item.
this was my problem -- mine was on now playing. i didn't realize this was changeable.
thanks for motivating me to click at and around that artwork pane in frustration, guys. yay.
solved.

X-Fi Platinum Multiple track record

??I have been doing a little reading on the forum for multiple track recording but I could not find anything specific enough for what i need. I have a Fostex digital recorder and i would like to either send out the multiple tracks of say a drum recording to multiple tracks on Majix Music Studio ten. I have been playing around with it but i cant find exactly what I need. Ideally I would like to use the ADAT format from a digital optical cable to bring in the individual wave files directly to the computer. But if?can find a better way or if sombody knows of a fairly inexpensi've digital mixer with at least 6 channels (any input preferably XLR). Also my recorder has SPDIF but only in a two track format. It also has MIDI outputs and inputs but so far I dont think I can use that?for controling my software and sending in multiple tracks. I know my program can do ASIO and WDM. But I dont know what inputs are assigned to what numbers. If any body can awnser any one of these questions please post. ASIO sounds great but how do I identify the track numbers to what input and can i input all the tracks from a digital input?Comp info:?Windows

W/ ASIO, you can record from as many sources as you get listed/selected separetley in ASIO input port list (meaning those w/ names like Line-In, S/PDIF-In, Mic-In, Aux-In since, there are many of those ports meant for internal routings (W-U-H)). I don't know if you can use S/PDIF and analog inputs simultaenously. Here are some detailed information for Creative ASIO drivers (for Audigy cards but ...) - http://forums.creative.com/creativelabs/board/message?board.id=profaudio&message.id=726
I think that Fostex is not very usable for you if you don't build a ADAT system over it. If you have the ADAT option in Fostex already available there and you can get 8 separate channels out from Fostex through it then you could get a soundcard which supports ADAT I/O (something like E-MU 22m ($99 atm.)) and record through Fostex into PC (though, A/D conversion quality Fostex does is propably not very good). Maybe you need more mic-preamps to record drums then too.
jutapaMessage Edited by jutapa on 0-5-200708:32 PM

Apply 1 FX to multiple tracks?

Is it possible to apply FX to multiple tracks at once? I have 15 clips I want to compress, but so far I have to apply the same FX to each one individually. Thanks

You would either have to apply the Compressor effect to the Master output and send the mixed tracks to it or assign the tracks to a Bus where you place the Compressor. Otherwise yes you have to apply it individually. As each track will have different audio anyway you would need to adjust the Compressor settings separately anyway.

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Multiple tracks on a single processor

Hi,
Whenever I create an audio processor, the number of tracks is always one, that figures that I can only transmit a single codec, like gsm or ulaw. Say, i need a processor with multiple tracks in order to switch codecs dynamically during session. How can it be done? i've tried using ProcessorModel and feed it with multiple audio formats, but it would throw a CannotRealizeProcessor exception all the time. Any ideas?

I was waiting for someone to give you an answer on this because I'm curious if anyone has been able to do what you described...
Alas, from the extreme silence I assume nobody has been able to do what you describe. Personally, I think I would create a custom Codec that would incorporate the codecs I wanted to switch between and do it that way. You would have only one track but the codec would have to somehow know when to switch decoding/encoding methods. Presumably a payload change event or other programming event could trigger this. This is somewhat similar to how I've handled DTMF events with Ulaw data in the past.

Advice Needed: Filtering/Adding effects to multiple tracks

I'm writing a dance song, and at one point would like to apply a few filtering sweeps on selected drum tracks.
Which is the best way to do it? Is it to bounce down the tracks into an audio file, then apply the effects onto that file by itself, or is it better to route the multiple tracks to an effects bus?
I have been trying using a bus, but have found that as soon as I route the tracks to the bus, the is a change in the sound quality of the track (louder and sometimes slightly distorted), even without any plugins on the bus. Am I doing something wrong?
Thanks.

I have been trying using a bus, but have found that as soon as
I route the tracks to the bus, the is a change in the sound quality
of the track (louder and sometimes slightly distorted), even
without any plugins on the bus. Am I doing something wrong?
How are you routing to a bus? If you are just using sends, then what's happeing is that the individual channels are going to the master output, and also being sent to a bus that is also going to the master output - this everything sent to that bus will get louder.
If you want to send a bunch of channels directly to a bus for insert processing, then change each channel's output to the bus, rather than the main output, so the individual channels only go to the mix via the bus, and not directly.
Or are you doing something different to that?

How do I extract multiple tracks from a CD into a single file in Audition CS6?

I use Audition to edit my Pastor's messages. The message CD is made with five minute tracks. I want to extract the tracks from the CD into a single file for editing and altering the track lengths. I have done this before in Audition CS6, but I haven't been able to find instructions for it. I only found a note stating this is available in AuditionCC.

I have discovered an answer to my problem. The way to bring multiple tracks into Audition CS6 from a CD is to use the FILE / OPEN APPEND / TO NEW command. This brings the separate tracks into a single file in Audition CD6. Thanks to everyone who commented.

Is there any way to change user operations on multiple tracks at once?

I have a complex project (99 tracks, dozens of menus and scripts). I need to make one version of this DVD for the end client (teenagers at health clinics) who will be forced to view it in a specified way, and another version for educators (staff at the clinics) who will be allowed to fast-forward and have access to a menu from which they can jump to different points in the DVD.
I have different menus to serve as "first play" for these different versions so that I can easily switch between versions when burning disc images, and I have set up GPRMs to make navigation different for the two versions automatically. My problem now is that I want to disable forward scan, next program, root menu, and title menu for the client version. As far as I can tell, I have to do that independently for every single track and menu. Bleah. This is especially annoying since the DVD is still in development, so I am continuing to change small things and will need to keep both versions up to date as I do.
Is there any way to select multiple tracks/menus and change user operations on all of them? Or any other work-around or script that could do it? I thought this would be a perfect task for the automator, but I'm not very familiar with that application and don't know how (or if it's possible) to create new actions other than the ones that are available.
Any ideas?
thanks!
Julie

Thanks. But the disc inspector only appears to let me change things like where the title menu button takes you, not detailed user operations. I have pretty much given up on this being anything other than a giant hassle, but if anybody knows whether a script could do this, I would be eternally grateful.

How do I select multiple tracks in iTunes?

It's like a hold down control and something else, and then drag the curser to select the songs you want selected. I'm not sure what this shortcut is. Again, I want to select multiple tracks on iTunes so I can move files or delete them. Simply selecting all won't work because the files are different names. Anyone know this shortcut? Thanks!

If you click a track, hold down shift, and then click another one, it will select all the tracks between those two. Holding down command (the apple key) will allow you to select/deselect individual tracks.

Fast/most efficient way to cut out of multiple tracks at the same time

I try to select by dragging around but it lights up the entire length of each tract- I can use the scissors to manually cut the tracks but there has to be a better way...any ideas?
Thanks, Don

I don't know if this is most efficient but here's my "home grown" way:
I place the section locator bars located at the top in the area I want to cut. You can fine tune this by zooming in close. I then right click on the track and use the split at locator function. I then can cut, drag or copy just that new, separate area. If you want to cut multiple tracks you can leave the locators where they are and repeat on all the tracks you want to split. I haven't tried selecting multiple tracks, and I'm not at my computer to try it right now.
Maybe there's a quicker way but that has worked for me!

OBIEE 11g issue - same user assigned to the multiple application role

Hi All,
We are facing an issue when assigning a user to the multiple application role and applying the data level filter on the different column of the same table.
For example, we have a table Department with three columns Department No, Department name, Department location.
Application Role A1 and A2 are created.
Data Level security Applied on the application role A1: Department Name='Finance'
Data Level Security Applied on the application role A2: Department location='US'
The user "User1" is created in LDAP and is assigned to both the Application roles A1 and A2.
When logged in with "User1", none of the filters of Role A1 or A2 is applied in the report. If this user is assigned to only one role, either A1 or A2, then the filter is applied. It seems the filter will not be applied if a user belongs to multiple roles with data filter applied on the same table across these roles.
Please reply if anyone has faced similar issue.

Hi All,
Regarding the above issue to update the analysis we came up that the user if assigned to the multiple group with the data filter applied on the same column of the table is getting an *"OR"* join.
We had a requirement to get an "AND" in the query condition. Please let us know if any one faced the issue and the resolution of the same.
Regards,
Jyotshna

JAR Files for multiple tracks

Hi All,
We have a scenario where we need to provide JAR files which needs to be accessible by all the tracks.Is there any solution which is being followed.
In the current landscape we have built external library DC's for each track and trying to access the JARS. But the limitation where we are struck up is this DC is being only accessible to DC's in that track but not to the remaining tracks.
Is there a global solution where we i can make my JAR file can be made accessible to multiple tracks.
Thanks & Regards,
Lokesh Kamana.

Hi,
Thats a good idea.
I have a SC component created in SLD and create a track for this and copy the ext lib DC to this track.
Define outbound connections for moving transports.
But how to create an SCA file for my DC.
ANS:-Just by clicking on assembly get a SCA file for this track and as outbound connection is defined this SCA gets moved to my track import that to all my tracks where i carry out my development.
While moving the transports to other environments do i need to move this SCA file also along with them.
Please let me know whether my understanding is correct or not.
Thanks & Regards,
Lokesh Kamana.

HT1451 when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

when editing info, how do i select multiple items to edit a group? For example, changing the artist name on multiple tracks at once?

Same way you select multipl items anywhere else.
Hold ctrl and click the items you want.
If they are in consecutive order, click the 1st then Shift click the last.

Assign equalizer to multiple tracks

Similar Messages

Maybe you are looking for