Assign Logical System both in GTS and R3

Hello all,
We are using Two different system for R3 and GTS , and defined logical system both systems ( for R3 QR1CLNT100 and for GTS QG1CLNT100 , now do I need to assign logical system both system for clients in R3 and GTS ( I mean at the time of assignment both clients QR1CLNT100 & QG1CLNT100 i have to assign in both systems  or only one.   For Feeder system only I need to assign GTS system logical system as QG1CLNT100 vice versa ( for GTS system need to only Feeder system logical client QR1CLNT100)
Thanks in advance for valuable inputs.
Thanks & Regards
Tarun

There are following steps  for doing connection between R/3 and GTS
1. Define Logical System
  Here you have to define both R/3 logical system as well as  
  GTS logical system.
2. Assign Logical System.
Here actually when u get in you will see the physical system
detail on which you are logged in , suppose you are on R/3 you will find detail of R/3 system with different clients. Some clinet willcome as default like 00 which is waldrof client the SAP client and other are are those which are created at the time of installation.
Here you have to assign the logical system of R/3 to the physical system client combination on which you looged in.
you will find a field  of logical system on the top once you get in detail of the client system combination.
Now here we have assigned the Logical system of R/3 this is required as when GTS will communicate wiht R/3 it willtry to look for  R/3 logical system as for RFC connection we always define logical system to which the system will talk.
this configuration we do under Maintain RFC connection for RFC call Tcode SM59
3.  Maintain RFC connection for RFC call Tcode SM59.
   Here we define the Target host, and logon detail like 
   language , client, user passwaord.
   We need to define the detail for GTS for RFC connection and   so we need here the logical system of GTS.
4. Maintain RF destination for method call
  Here again you will require GTS logical system .
5. Maintain ALE distribution here you will require both R/3 and GTS logical system.
Hope it helps
Kind Regards,
Sameer

Similar Messages

  • Creating and assigning logical systems foe connecting BW to R/3

    Hello ABAP Pundits,
    I have to connect R/3 (sender) to BW (reciever). So I guess, I need to create logical systems in both BW and R/3.
    So does this mean that I have to create two logical systems on R/3 and two logical systems on B/W ?
    Do I need to do assignement of these newly created logical systems on both R/3 and BW separately ?
    Pleae elaborate...
    Regards,
    Tushar.

    I think the following documents should clear your doubts.
    http://www.sappro.com/downloads/OneClientDistribution.pdf
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    Regards,
    Ravi
    Note - Please mark all the helpful answers

  • Regarding problem while assigning logical system

    Hi Friends,
    I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
    while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
    could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
    Regards,
    Madhu

    Hello Madhusree,
    I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
    By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
    Regards, Anil. 

  • Assign Logical System to client 000

    I need to install Bw at SAP ECC 6.0, in doing so on the client 000 with the transaction RSA1, present the message that should be assigned System logical customer 000, it does not bring inconvenience to any future activity,
    Thanks

    Hi Victor,
    If you're installing BW you shouldn't use cleint 000, create a new client...
    Once you create the client go to transaction SALE and You'll see Create logical system ans assign logical system in the list.
    First create a new logical system for the client to use... then assign the logical system to the client.
    Regards
    Juan
    Please reward with points if helpful

  • "Logical System"  &  "Assign Logical System to Client"

    Hi Experts,
    I'm new to Basis, I have the following systems installed:
    1. EBP and SUS are installed in same server with different client:
        EBP:  E01 with client 100
        SUS: E01 with client 200
    2. ECC system is installed at a separate setver
        ECC:  D01 with client 100
    My question is, in EBP client  which logical systems and client assigments need to be done?
    What I confused is,  for the EBP and ECC they have same client number 100,  in EBP client , the client number 100
    should be assigned to EBP or to ECC?
    Kindly please guide.
    Thanks and best regards
    Jack

    Hello Jacky,
                       You can assign the client number 100 to EBP and ECC systems, it doesn't create any problem. Because when you logical system in EBP, you need to create two logical systems one for EBP and ECC, but you need to assign client 100 to EBP only, same goes to the other side also.
    Regards,
    Prasanna

  • How to Assign Logical System to a Client in SALE Transaction

    Hi ABAP/EDI Specialists,
    1How to Assign Logical System to a Client. In the SALE transaction window.
    I didn't see any Receiving and Sending Systems(Tree). But I can see Logical Systems. In the Definition and Assign Subtree are there. I created two Logical Systems STUD_S and STUD_R. When I executed Assign Logical Systems. I got a window, Where I can see a list of Clients. I got confused, how to Assign those Two Logical Systems to Client 800 and 810. Finally I double Clicked on each client and in the next window. I changed the Logical System to STUD_S for Client 800 and Logical System STUD_R for client 810. and saved them.
    Is this procedure correct???
    Why I need this is, While generating partner profiles in ALE Model (BD64), I am getting no list at all. When I executed I got no list.
    "No messages have been defined for the selection conditions in the Model"
    I got struck at this point.
    Please help me to come out of it.
    Thanks,
    Chinna

    Hi Chinna,
    Thanks for such a valuable information. I am able to move further. But i got struck while generating parntner profiles from ALE distribution model.
    Log For Partner Profile Generation:
    Partner:
    Partner ZVK_SS_800 as partner has been Created ( Sending System)
    Partner ZVK_SS_820 as partner has been Created (Receiving System)
    Port:
    Port Cloud not be Created
    RFC destination ZVK_SS_820 not specified for system ZVK_SS_820
    Enter the RFC destination and Restart the generation
    It is not recognizing the RFC port, even though i followed all the steps correctly.
    While creating RFC destination, can someone tell me How to fix the above error and what is the Client No, Username and Pasword i have to give.
    Thanks
    Chinna
    Edited by: Chinna on Jun 6, 2008 7:43 PM

  • Logical Systems for client 000 and 001

    I've just install solman 7.0 ehp1 sr1 and am going to create a new client from 001.
    Do I need to create logical systems for clients 000 and 001?
    Do I need to creat rfc's for these?
    Thanks,
    Daniel

    no, no need.
    you will create a logical system name for the copied client (such as 100)

  • Creating and Assigning logical system after executng RSA1 transaction

    Hello guys, i am stuck since many days for running the transaction RSA1 for BW but message comes you can work only in client 001 only. when i try to log in with bcuser i cannot but i am able to log in with DDIC user but it says there is no logcal system assigned. I tryied to create a new logical system but it says user ddic may not change objects something like that. please help in this case that how i can be able to use bw in NW04s trial. i created a user in the client 001 but this user fails to create logical system and mssage states that you do not have authorization to do this actine. i hope i will get the answer very soon. Hafiz Anis

    For BI7.0(sap netweaver 2004s) help docs pls check the below links
    Check these links:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
    NW2004s help:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm -> SELECT key capability
    http://help.sap.com/saphelp_nw2004s/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm then select
    -> information integration -> business intelligence.
    For Modeling in Netweaver BI:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
    To know the New Features in BI:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
    Also check these links as well:
    https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e
    BI Data Modeling and Frontend Design
    For Netweaver Security & Authorizations:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8c/2ec59131d7f84ea514a67d628925a9/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fda2a990-0201-0010-5497-b81b1556df24
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
    Also check for documents in SDN .You can find the screen shots,Demonstrations and lot of documents:
    https://www.sdn.sap.com/irj/sdn/developerareas/bi
    Hope it helps

  • Assigning Feeder System Document in GTS

    Hi
    Please let me know if anyone else has faced this situation before. In the GTS Customs Management, I am assiging the Logical System, and R/3 docs of the Application MM0A and MM0C to the GTS Docs (GTS SPRO>IMG>SAP GLOBAL TRADE SERVICES>SAP CUSTOMS MANAGEMENT>GENERAL SETTINGS>DOCUMENT STRUCTURE>ASSIGNMENT OF DOCUMENT TYPES FROM FEEDER SYSTEM>ASSIGN DOCUMENT TYPE AT FEEDER SYSTEM LEVEL). First time System accepts the values and saves it. When I re-enter into the transaction I would not see any entries and if I try to re-enter the values, System gives me an error message "An entry already exists with the same key". Kind of strange as I am not able to see those so called existing entries and again it is also not allowing me to re-enter the values. Please let me know if I am missing something.
    The entries are getting saved and can be seen for application MM0B though.
    Thanks

    In Customs Management, only certain processes are relevant. In  the case of imports it is MM0B (Goods Receipt) and in the case of exports, it is SD0C (Proforma Invoice after the delivery document is created).
    Logically, these are the drivers for Customs processing. As MM0A & MM0C are not relevant, the same is not getting displayed in the configuration table. The reason for getting the error message is due to the entries available in the underlying configuation table. If you need to delete the entries, use transaction SM30.

  • Error while assigning Logical System to Client

    Hi,
    I am trying to perfomr data transfer suing Idoc from SAP R/3 to PI.
    For this, I have created a logical system PD1CLNT100.
    But when I try to assign the client 100 to this Logical system through SALE, I ge the following error
    "An entry already exists with the same key SALE"
    but I am unable to see this entry in the client list in SALE.
    Please tell me where is it picking the entry from?
    regards,
    Piyush

    Hi  Piyush Mathur SAP   
    Check once again for Client 100 ... there willl be entry  (Assign the Logical System to Client)
    Check in table  V_TBDLS  for Logical Systems..
                             T000         for Clients
    Log out from the system and log in once again and check it....
    i hope Above info helps you
    Thanks
    Ramesh

  • Assign logical system to client

    I understand that we assingn a logical system to a client in tcode SALE.
    However my Q is if say i have one receiver system YXD/800 and another receiver system RXD/800 ....
    when i try to assign client 800 to these 2 receiver systems it allows me to enter only one receiver system..
    Cannot I assign same client ( say 800 ) to two different receiver systems

    hi ,
    according to my understand about your post,
    you transfer the data across the three users of 800 client.
    you have to create three logical systems for three clients.
    then you can maintain RFC destination across two systems by using SALE.
    Regards,
    karunakar

  • Assign logical systems

    hi,
    why we have to assign client to logical system

    In setting up and distributing the distribution model, we assign client to logical system.
    This is a mandatory step in the configuration of ALE.
    Regards,
    Pavan

  • Assigning logical system to a client in CUA

    Hi All,
    I have got a doubt in the basic configuration in the setup of CUA.
    I have performed all the steps that is given in the CUA cook book.
    In, assiging the logical system to a client, whether this step shoud be done only in the central system alone.
    Or the assignment should be done in the child system also.
    When i created the all the steps in central system, logical system is created automatically in child system. but in the client assignment i didn't find information. in cookbook also they have do it in all the SAP system.
    kindly advice.
    Thanks and Regards,
    Subhashini.

    >
    > So creating clients in Central system is enough for the child system.
    The term you used "Creating Client" is technically wrong in this regard. You already have a client which is in use as Central system - right? You need to maintain the details of Logical system names of all the Child system in Central system to keep the central system updated with the knowledge of type and name of the Child systems it has. This definition can be done by using TCode BD54 which is table maintenance view ( V_TBDLS ) of the table TBDLS.
    There is nothing to do or even can be done like Creating Client within a client (here your central system).
    > Since there is noe transfer of user master from child to central system no need to create a client for the logical system.
    >
    Its true that there will no transfer of user master from child to central system. But of course the similarly here you are not creating any client within the child system. You are just creating the logical system name (tcode BD54) for this client (child system) and mapping it with the client in tcode SCC4.
    Let us know your question. Also as suggested by Barnherd, please go through the SAP Help documentation on CUA. Also try to get an overview of Client in SAP (from SAP Help or SAP course ADM100) and Logical Systems.
    Regards,
    Dipanjan

  • Re: Assign Logical System to Client

    Hi Guys,
    Currently our BI client 100 is connected to ECC client 140. Now I want to connect BI client 100 to e-recruiting client 180.
    How to do this?  How to assign same client to different logical systems?
    Regards,
    Anand

    first i created logical sytem for erecruiting.
    for BI the logical system already defined as it is already conected to SAP ecc.
    Second step using tcode SCC4, now how to assign the logical system of e recruiting to BI client 100.
    Already BI client 100 is assigned to SAP ecc logical system.
    Its not allowing me to define another logical system for same client.
    Am i doing the right step?
    Regards,
    Anand.

  • Default logical system names for application and metadata in models.

    hi,
    I have a dbt in web dynpro java. When we create a model, we give the logical system names. When our developement is over, do we have to change these names because in test system and subsequently production system, the backends will be oviously different than developement ?
    how do we change them and re import after changing? in abap we cant change our code in test and prod systems right  so how is it in web dynpro java ?
    thanks

    Hi Jeschael,
    thanks for the reponse.
    When I create the model, I give the default logical system names and on the next screen I give the
    ip address of the backend system, client , login, password etc
    Even though the logical system names wud be same in Dev, Test and Prod systems, the ip address, login password is different so how do I give it ?
    thanks
    B

Maybe you are looking for